12 ms·
Vapor chamber tech keeps iPhone 17 Pro cool
- leakycap 1y agoI'm interested to see how many/few complaints we see about the iPhone Air overheating, since it has almost the exact same chip as the 17 Pro but a simpler cooling system "My phone is really hot, is this normal or is it broken?!" is something I started getting asked by random iPhone-using friends over the last few years as they upgraded to a new model and then felt it sizzling.
- thewebguyd 1y agoGot my air yesterday and it definitely gets hot. Will see how it does after a few days as I expected the heat due to the initial sync and transfer, and iOS indexes everything for a day or two. But even then it was no hotter than my 16 Pro
- reaperducer 1y agoGot my air yesterday and it definitely gets hot. Will see how it does after a few days as I expected the heat due to the initial sync and transfer, and iOS indexes everything for a day or two. I have one, too, and you're right that the heating is just what happens while it restores its data and settings and whatnot. I believe it also re-scans your entire photo library to re-identify dogs, cars, people, etc. with whatever improved algorithm comes with the new chip/OS. This happens every time you get a new iPhone. Depending on how much it has to sort through, it can take a couple of hours to a week. I always leave the case off for the first few days.
- dannyw 1y agoAs a photographer with over 50,000 photos in my iCloud, getting new iPhones is a pain.
- jtokoph 1y agoI figure it will just be clocked down to maintain thermals
- Havoc 1y ago>I'm interested to see how many/few complaints we see about the iPhone Air overheating One less core, and from the benchmarking it's clear that it throttles a fair bit earlier than the rest. Even worse its a titanium body so worse dissipation
- Wistar 1y agoLast night I encountered a 3 min+ ad on YT about the construction of the iPhone 17 Pro. A few seconds were devoted to the cooling system. I watched the whole thing. It was better than the video it interrupted. https://youtu.be/_-AS5DtDeqs?si=rTfubRDArVupqREt https://youtu.be/_-AS5DtDeqs?si=rTfubRDArVupqREt
- VertanaNinjai 1y agoThis might be the first time I’ve seen someone happy about an advertisement in the wild. It is a cool video though!
- supriyo-biswas 1y agoThe ads for ReMarkable 2 and Apple’s Don’t Blink are quite captivating and entertaining in a way that I can’t claim about typical advertising.
- cj 1y agoWatching that video, the first thought I have is "So much engineering and I still need to buy a phone case with my new phone?" I'm guessing phone cases are still pretty much required if you drop your phone once or twice a month onto cement/asphalt/marble/etc from pocket height. I would be really curious to hear the internal debate at Apple wrt design tradeoffs + durability. E.g. how much of the iPhone design is only possible because Apple is assuming the average person will have a case on their phone. I wouldn't be surprised if the typical consumer would be more impressed by "No Case Required iPhone" compared to "Skinniest and lightest iPhone yet!".
- JumpCrisscross 1y ago> I still need to buy a phone case with my new phone? …you don’t. I don’t. My phone is scratched here and there, but not in a way that I notice. I used to defend this with my purchasing of insurance, but frankly, I crack the screen now maybe once every 2+ years. > Apple is assuming the average person will have a case on their phone I think it is fair to assume that irrespective of the design, most people will case their phones. Leaning into that is fine as long as the phone is still functional without a case. (Which, again, every iPhone in the last decade has been.)
- deadbabe 1y agoI have an iPhone Air now and have no complaints about the heating. The thinness is worth the occasional heat and throttle down. Every time I pick up this phone, it just feels fantastic!
- fooqux 1y agoSerious question: how is the thinness providing value? Is it simply the feel?
- lysace 1y agoBack when I had the iPhone 5S (7.6 mm vs the 5.6 mm of the iPhone 17 Air): It provided value in terms of feel. It felt like a piece of art meeting cutting edge technology. It wasn't about showing off. It was also so light that it felt safe to use it without a protective case. And not that expensive.
- reaperducer 1y agoNothing feels better than the original iPhone. Solid, tactile, and just the right size. Mine finally got stuck in a boot loop earlier this year, but I keep it in my desk drawer, and pick it up occasionally. The mute switch (an actual switch, not a button) is still the best.
- kasperset 1y agoPhone usage is getting more intense as we move from mere passive consumption to having them as creative (compute) device. "Heat" is sort of reflection of that. I want to see more optimization to reduce the heat from both hardware as in this case and in software side as well. I guess it is easier to show enhancements about hardware made to address something such as heat or processing but comparatively difficult or abstract to show software optimizations?
- leakyfilter 1y agoFrom a keynote perspective, I guess showing software optimizations is less cinematic and not everyone can appreciate them as opposed to new or beautiful looking hardware.
- ksec 1y agoI really hope this will land on MacBook Air M5. Enough for me to keep the me on Air rather than going Pro.
- sigmar 1y agoProbably more likely on the macbook with the A19 pro chip (rumored). They'd probably be able to use the exact same vapor chamber
- amelius 1y agoWhy the emphasis on Apple when Samsung was there first? It looks like the competition is making them sweat (pun intended).
- jjice 1y agoBut the sweat is evaporating now, at least. But seriously though, I think it's just due to larger market share (at least in the US), so more people are seeing it and commenting on it.
- fooqux 1y agoYou should know how this goes by now. It's not like this is the first time Apple introduced an old technology but marketed it like they invented sliced bread. I give their marketing team credit.
- bapak 1y agoSamsung is not Apple. Relatively no one cares about Samsung outside Korea.
- kyriakos 1y agoI think you are exaggerating how much people care about apple outside US. Apple is popular but Samsung, Xiaomi etc are also very dominant in other markets.
- bapak 1y agoI'm not US based, you have no idea what you're talking about. Market share is not what matters. When an S30 comes out, nobody cares. When a new iPhone comes out, my mother asks me about it. This is why you're seeing a lot of people talking about something that Samsung did first.
- whatevaa 1y agoYou are very from US to think that. Samsung strong in Europe.
- thelastgallon 1y agoCan this tech be used for EV batteries?
- fooqux 1y agoI guess? But vapor chambers are mostly good where space is a premium and where passive (non-powered) cooling is enough. I'm guessing for EV batteries, better options exist since you obviously have power. Although sometimes vapor chambers are used in conjunction with active cooling.
- lazide 1y agoHeat pumps are way better if you have to manage a lot of heat anyway.
- Tagbert 1y agoEV batteries have active cooling systems that force cool air through the packs.
- rootusrootus 1y agoEven better, it’s not air, it’s usually liquid coolant. In my Lightning it’s the same formula they use for their gas engines, even.
- dmsnell 1y agoVapor chambers and heat pipes are exceptional at moving heat from a relatively small part of them to distribute it around the whole. This is because the heat dumps into a liquid which is concentrated at the heat source, but as soon as it evaporates it fills the volume in which it’s contained. Also it’s because the evaporation process itself sucks out heat at a rate that’s orders of magnitude faster than via conduction, convection, or radiation alone. They do not cool though. They rely on the fact that the heat source is relatively small and that something else can pull heat out of them fast enough to re-condense the liquid (and since they distribute the heat that cooling can attach anywhere or everywhere — this is like an embarrassingly parallel problem in software). In a battery pack there is a lot of surface area that gets relatively and evenly hot, and little room to extract it between the cells. This would likely result in even heating around the heat pipe, which would tend to evaporate all of the liquid inside and do nothing but raise its overall temperature after an initial delay. What it potentially could be used for is to draw heat out of the battery pack and up to some place where better airflow were possible, or for some active cooling system to extract the heat, but there are problems with scaling up like that (in typical heat pipes they manufacture wicking inner layers to draw the water back even against gravity). At the points they could be used it’s likely significantly cheaper and easier to control some air or liquid cooling loop through the batteries. Phones are ideal because a tiny little chip is producing almost all of the heat. It’s not even a lot, it’s just in a small area. Temperature goes up when heat can’t escape, so in this case, spreading the heat around even a few square inches can be a major factor in keeping down the temperature of the CPU/GPU. Contrast this to EV batteries which are huge and produce evenly distributed heat already; there just isn’t the same value when things are big enough to add cooling systems, when cooling systems are necessary anyway, and when the heat pipe or vapor chamber just adds another piece too the system.
- lysace 1y agoNot exactly brand new tech, but now on a mobile device without the long-term security baggage that often comes from using Android.
- bigyabai 1y agoI think NSO Group has pretty thoroughly demonstrated that iOS users aren't exonerated from security concerns.
- lysace 1y agoYes, state actors will be able to breach into your iOS device if you're deemed important enough. Edit: Meanwhile your average Android device has multiple publicly known remote execution issues.
- bigyabai 1y agoYup. Pretty similar to the modern threat profile of Android, all things considered. > your average Android device has multiple publicly known remote execution issues. Help me distinguish between "publicly known" RCE vulns and private ones. Do the privately owned exploits like FORCEDENTRY count as "publicly known", or only the Greykey/Cellebrite exploits used by governments?
- JumpCrisscross 1y ago> Pretty similar to the modern threat profile of Android, all things considered I don’t think this is accurate. Not even every nation-state would be expected to have access to iPhone zero days, particularly with the new memory protection rolling out.
- bigyabai 1y agoI don't think that's accurate, either. NSO Group sold their exploits to several other nation-states, seemingly without much (any...?) vetting concerning the ethics of their government.
- 0_____0 1y agoThis is a heat pipe. A technology from the 60s. Your laptop almost certainly has heat pipes in it. They usually use alcohol rather than water as the phase change material though. The (relatively) novel thing is that it's packaged small enough to be in a phone. I suspect the only reason it hasn't been used in handhelds more is because the TDP of mobile processors wasn't high enough to warrant it.
- Onavo 1y agoIt's a little bit older than just the 60s..
- JoBrad 1y agoAs I understand it, it’s more than that: there are small “inverted pyramids” that cause the water to condense more rapidly, to extract even more heat from the system. https://youtu.be/qAZ-q3KmDHM?si=pb08RMHEAA4o94xF https://youtu.be/qAZ-q3KmDHM?si=pb08RMHEAA4o94xF
- DoctorOetker 1y agotexture etc to promote condensation and to wick (without a rope) condensed liquid back to the hot point are also used in heat pipes. I agree with the other commenters that "vapor chamber" is a kind of heat pipe, since "heat pipe" doesn't really impose constant radii by definition.
- esperent 1y agoHeat pipes are one dimensional (a pipe), vapor chambers are two dimensional (a square chamber). Most vapor chambers I've seen on GPUs have the chamber attached to lots of small heat pipes on the side though (they even note this in article, in case you feel like reading it). That said, I assume the main technical breakthrough here is in manufacturing, producing tiny chambers consistently in enough volume for iphones.
- 0_____0 1y agoAny passive phase change thermal solution is doing the same thing - take thermal energy from one place, and distribute it for dissipation. My point is that the geometric configuration isn't that important, it's doing the same work the same way. Not really worth arguing about, I just suspect that the branding people love that they had a new buzzword in "vapor chamber" to bandy about. I liked this article from 10 years ago that actually goes into detail about how Fujitsu actually constructed a super-thin heat pipe (really just a very long vapor chamber) https://spectrum.ieee.org/superslim-liquid-loop-will-keep-future-smartphones-cool https://spectrum.ieee.org/superslim-liquid-loop-will-keep-fu...
- jml7c5 1y agoOppo uses these in some of their phones. They gave a factory tour to the "Know Art" Youtube channel, which made a good video on it: https://youtu.be/qAZ-q3KmDHM https://youtu.be/qAZ-q3KmDHM
- orev 1y agoWhich most people are going to immediately cover with an insulating layer of plastic or silicone. At least the heat will be spread out from one spot (and into the battery?). All phone makers are doing what they can within the design constraints.
- jrowen 1y agoWhy have none of the major players tried integrating a case? Making a ruggedized version? They could probably do a lot better and find ways to innovate with something integrated. Why do they ignore the fact that so many people use cases (and the market opportunity)? It's almost a defect at this point. Some people like the personalization but I think a lot of people just want something that won't break when you drop it...
- vlovich123 1y agoLots of reasons. The most obvious ones that come to mind: 1. People like a variety of custom cases that themselves have features (eg wallet cases random designs etc). If it’s built into the phone that customization capability is worse because you now have two layers of protection making for a very thick and heat-insulating design. 2. It’s valuable to have partners that make accessories for your device. If you kill that line of business for them, other things may go away and those partners will want to work with you less. 3. An integrated case will still suffer cosmetic damage. But now without the option to replace, you’re stuck with that damage.
- Aurornis 1y ago> Why do they ignore the fact that so many people use cases (and the market opportunity)? Apple sells cases. There are ruggedized phones available. The market is small. You can get away without a case with a modern iPhone for longer than most people assume. The average person does better with a $10 sacrificial case layer that snaps on to their phone that can be replaced whenever they want or if it gets damaged.
- rootusrootus 1y agoI’ve had phones before that rugged enough to not want a case. It’s great, I wish there were good options like that today. But I think I prefer a separate case. When mine gets enough wear and tear, I replace it and it feels like I have a whole new phone.
- busymom0 1y agoAnyone noticed that the gradient pattern on the wallpaper says "PRO" if you look closely?
- Havoc 1y agoPretty sure this is 99% a reaction to LLMs. On the older ones things get really spicy with even short on device LLM runs.
- tngranados 1y agoI've noticed my iPhone get hot the most while using the camera. Especially while taking video, but after a few photos it gets hot as well. I was on vacations last week in a tropical country and took a lot of photos with my 16 Pro and it gets so hot after just a few photos that it starts lagging A LOT due to the throttling. I'm sure this is handy for LLM usage, but this was a problem before those were a thing I'd say.
- shinycode 1y agoI have the same case, iPhone 16 pro is getting really hot when taking photos and videos it’s unbearable. I will change my phone for that reason, the battery melts right away … I noticed something though, when taking a picture with the x5 camera if I cover the main lens the brightness changes. So I think the iPhone now merges the two stream to enhance quality. That wasn’t the case before and that might be why the phone is getting hot
- lostlogin 1y agoMy 16 pro is frustratingly laggy taking photos all the time, particularly from the lock screen. It's a little better from the camera app.
- lif 1y ago17th iteration in less than 20 years, billions produced. About a billion already 'obsolete'. Seems fair to ask: what's the expected lifespan of an iPhone these days? Does anyone here have insight as to what percent of materials used to make them is actually recycled?
- kccqzy 1y ago> In Apple’s version, a small amount of deionized water is sealed in the chamber. […] Water is often used in vapor chambers, though sometimes other materials are mixed in to prevent it from freezing and cracking the seal, Chiriac says. So Apple uses deionized water, while others add in some other chemicals to prevent it from freezing. So how will the new iPhone deal with freezing temperatures?
- xyx0826 1y agoIs it necessary to prevent the water from freezing? If the chamber and water within are subzero while the SoC produces sufficient heat, the ice would simply melt. * Edit: the article mentioned freezing could crack the seal. Freezing would be a bigger issue than I had thought, then.
- willis936 1y agoI remember being stuck on a ski lift on a day that was too cold and windy for any intelligent person to be skiing. The phone in my breast pocket was cold to the touch and the battery capacity evaporated by 50%. The display's response time was hundreds of ms. I turned it off at that point. Not a huge deal. Just charge it when it's warmer. I would have been a little surprised if something inside popped and suddenly the phone started thermal throttling or had water damage.
- vbezhenar 1y agoIn my city, temperatures are regularly below -20 Celsius and sometimes below -40. iPhone just doesn't work. You need to keep it close to body and you can't use it outside for a prolonged period of time, it'll simply shut off in a few minutes and won't turn on until you heat it. Old phones and some android phones work just fine in these conditions.
- kasabali 1y agoIt shouldn't crack the seal because there's very tiny amount of liquid inside there should be enough room to expand. but that's in theory :P
- monster_truck 1y agoThey must be struggling to hit their perf/w targets if this ended up being necessary. These phones are not going to age well, the paste or thermal pads is not going to last. Larger sheets of graphene for full size processors and gpus are good for a decade, at this size it'll be lucky to get to 5.
- user1999919 1y ago[flagged]
- sfortis 1y agoRazer Phone 2 laughs, 6 years ago: https://www.youtube.com/watch?v=UGsICbmmfws https://www.youtube.com/watch?v=UGsICbmmfws
- winrid 1y agoAlso same tech used in laptops. I was always wondering when we'd see this in high end phones.
- fennecbutt 1y agoI was wondering when yet again we'd see the "omg Apple!!! So innovative!!!" Wonder what the next Apple "innovation" will be.
- tymscar 1y agoMajority of your comments are nothing more than just bashing Apple with things that aren’t even the case. Nobody, especially not the title of this post, says anything about this being “innovative” or “omg”. I think you are right that there is an Apple mental field that controls people, but I actually think the effect is on the other side. Most Apple fans just comment on something new and go like “hey, look how neat this”. The haters, on the other hand, respond with more or less the same thing multiple times even in the same thread. I understand if a kid does it, it’s innate to humans to side with Pepsi or Cola, with Xbox or PS, but for an adult, it’s just sad. If you love tech, just appreciate new things regardless of who the company that makes them is. And if you don’t, then why waste your time on hating it all the time? Just get a hobby.
- ChrisRR 1y agoI still don't understand why massive cooling efforts are needed when most people are just sending messages and watching videos anyway. Your phone from 10 years ago could do that