19 ms·
Crazy Thin ‘Deep Insert’ ATM Skimmers
- ilaksh 4y agoATMs, ATM cards, banks and fiat currency are all obsolescent technologies.
- sneak 4y agoMost technologies with a huge installed base are obsolete compared to the state of the art. The larger the installed base, the higher the likelihood it is lagging behind the current patch revision. Magstripes and internal combustion engine ground vehicles are probably the two biggest examples outside of sociology/government.
- sp332 4y agoGift economy and post-scarcity is where it's at.
- ilaksh 4y agoNot at all what I am suggesting. The cards are very insecure and primitive and have been replaced by smart phones in most areas. One core way they are insecure is based on the main concept of the money which fails to utilize cryptography. Any money that uses cryptography to prevent the need for sharing secrets to execute transactions is a cryptocurrency. Any currency that does not use cryptography is obsolete. Using physical pieces of paper is also ridiculous at this point. The only real utility is to avoid any kind of taxation, and the only reason that is needed by people is because governmental structures are also horrible and obsolescent.
- mikem170 4y ago> The only real utility is to avoid any kind of taxation #1) cash works without power, #2) cash has different security and privacy pros and cons, compared to cryptocurrencies
- naet 4y agoCurious what you use if you don't use an ATM, ATM card, a bank, or fiat currency? People like to use this type of rhetoric around crypto and crypto-maximalism, but you absolutely cannot function day to day using purely crypto at this point in time.
- ilaksh 4y agoThat's why I used the word "obsolescent" rather than "obsolete".
- austinjp 4y agoYeah I'm not super convinced. If I want untraceable transactions, cash is hard to beat. (Pleeeeeease nobody mention crypto I beg you.)
- kube-system 4y agoCryptocurrencies, NFTs, and web3 are all immature technologies.
- cuteboy19 4y agoIn most Asian countries ATM cards are a thing of the past. QR scanning is easier, more reliable and significantly safer
- kube-system 4y agoAs far as technology is concerned, QR codes are far less advanced or secure than EMV. The only thing it compares favorably (and I’m being generous) to in terms of payment security is magstripes, which is a 1960s technology. QR codes have basically no inherent security. They are just barcodes in two dimensions. You can do physical MITM attacks on them very easily. For instance: https://www.techinasia.com/fake-qr-code-scams-china https://www.techinasia.com/fake-qr-code-scams-china
- cuteboy19 4y agoWhy so? QR is just an arbitrary url in image form. If anything EMV is both overcomplicated AND insecure. Eg the whole class of vulnerabilities from card theft and card skimming disappears with QRs Edit: I mean you could have a computer screen display the QR. How are you going to MITM between the screen and your phone?
- kube-system 4y agoNot all QR codes in Asia are on a phone. QR codes are inherently graphical, and anything printed can be simply covered up or replaced. Smart cards at least can at least implement public/private keys.
- callalex 4y agoHave you used any of those things you listed in the last 30 days?
- Maursault 4y agoGlad to know I'm not the only one that has abandoned money and transitioned entirely to the barter system. This past year, I only paid two hogs to the IRS. The future is here.
- renewiltord 4y agoI use contactless to get money out of the ATM. It looks like they'd get my PIN in this method but they can't replicate the card, then, right?
- gauravphoenix 4y agoNot a payment security expect, but based on my limited knowledge, the transaction is verified with the chip embedded in the card/device itself so I don't think that skimming devices like these can bypass NFC protections.
- jahnu 4y agoSo glad almost 90% of the machines I use have this these days
- mh- 4y agoCorrect. I'm not familiar with the implementation details, but there's a handshake involved in the NFC tap that prevents it from being cloned using a "dumb" skimmer like this.
- reaperducer 4y agoOne of my banks lets you use a QR code from the app. I haven't tried it yet to see how well it works.
- rolph 4y agowhen they get the pin they have a physical accomplice do a bump n dump on you for the card.
- nvr219 4y ago
- deleted 4y ago[deleted]
- tomcam 4y ago
- bryan0 4y agoIt's crazy how I never carry cash anymore. I can't even think of the last time I used an ATM. I often just leave the house with my phone and buy stuff with apple pay. Also how is magnetic strip still a thing? I thought this was replaced with chip and tap years ago...
- AngryData 4y agoIm the exact opposite, I always use cash. The only time I use a card is when im purchasing online. I find it far more convenient and I can pay for and buy things without worrying about peoples card systems being up or skimmers or anything like that.
- reaperducer 4y agoI often just leave the house with my phone and buy stuff with apple pay. I admire your uncomplicated, predictable life. Sometimes I want to buy something from a guy with the ice cream cart at the park. Sometimes I need to tip a valet, a doorman, a hotel maid, or another service worker. Sometimes I want to buy Girl Scout cookies from the girl with the table on the corner. Sometimes I want to buy something from one of the 35 million Americans without a bank account. Sometimes tow truck drivers take cash only. Many of the late-night restaurants and food carts in my city are cash only. Some day I'll go cash-free. But my life is not yet that simple.
- bolasanibk 4y agoI agree with a lot of the other things. But for this: >Sometimes I want to buy Girl Scout cookies from the girl with the table on the corner I have seen a lot of them carry Square dongles or accept Venmo payments. I guess they got tired of people telling them they do not have cash.
- phinnaeus 4y agoI think it's clear the person you're replying to isn't from the US since they seem unaware of how prevalent even magnetic swiping is in the US (or was when I left before the pandemic, when I visited a few months ago it seems interest in contactless has finally started to catch on).
- basicplus2 4y agoAlways put the other hand over the hand typing in the pin..
- Scoundreller 4y agoOr just type it in wrong, cancel the transction and walk away!
- deleted 4y ago[deleted]
- bparsons 4y agoAt this point, this is simply the negligence of the banks. Most OECD countries switched to chip technology over a decade ago.
- AnotherGoodName 4y agoIt may be worth running a magnet over your cards at this point. I can't think of a time I've used the mag-stripe. The skimmers here have a passthrough hole for the chip which means the mag-stripe only exists to feed the skimmers. So even this use case that gets skimmed isn't even using the mag-stripe itself! Fuck it. Where's my magnet.
- olyjohn 4y agoI've used the mag stripe tons of times over the last couple of years. Most of the time it's when I get "CHIP MALFUNCTION" errors at a card reader, or sometimes they just tell me to swipe for no good reason. I wouldn't kill the stripe unless you've got a backup with you, at least for a while.
- bparsons 4y agoTap is the standard, chip is the backup in Canada. I don't think my card would work with swipe anymore.
- skunkworker 4y agoI'm still a little surprised I can't easily get chip-only credit cards that have no magnetic strip on the rear, but rather have a backup card that has a strip, and use chip/tap for everything else.
- Scoundreller 4y agoCould always cut out the chip and place it on another recipient card. Nobody looks at the card for chip+pin transactions, but you’ll lose “tap” payment ability. I suppose you could get an “associate card” and destructively disable the chip and magstripe to accomplish your goal.
- deleted 4y ago[deleted]
- mwint 4y agoWould a good rubbing with a rare earth magnet clear the magstripe?
- MBCook 4y agoYou could always erase the stripe with a magnet.
- randyrand 4y agoJust run a powerful magnet over the stripe a few times.
- seanp2k2 4y agoIs anyone else annoyed that: - We could have had chip & PIN, but for some reason (I'm guessing it's to do with how merchants take the hit for card fraud and VISA + MC think having to punch in a few numbers each sale will lead to fewer sales) - Those tap targets on CC readers sometimes aren't where the antenna is, and you have to rub your card all over the reader to get it to work? - Chip transactions take way longer than tap transactions, like 10 seconds? Why?
- gpt5 4y agoContactless transactions using your phone are fast, secure and easy. Over time they will replace almost all current usage of chip & pin or magnetic stripe.
- akira2501 4y agoNo thanks. I like things that work without having to be charged.
- tempofinale 4y agoCharged for what? I have payment options on my phone so I don't have to bring my wallet everywhere. Works great, even for public transit and it's the same price as the card.
- lolinder 4y agoCharged with electricity.
- akira2501 4y agoCharged as in has a full and operational battery. A card with a chip in this does not require that. I can also intentionally give someone else my card to effect a purchase and neither myself nor my phone actually has to be there. Fraud clearly hasn't had a deleterious effect on the entire system, and the penalties for fraud align incentives to fight fraud properly. It's not such a large problem that I'm willing to take steps backwards in terms of functionality and privacy to digitize my purchasing.
- willhackett 4y agoI think the magnetic strip needs to go. We hardly use them in Australia to the point where one of our major banks actually has a touch reader on their machine. Some sort of one-time verification would be great. An SMS or a push notification would go a long way to making this type of scraping harder. Or eliminate the card altogether - Cardless Cash.
- Tijdreiziger 4y ago> I think the magnetic strip needs to go. Absolutely. Here in the Netherlands, magstripe payments are disabled by default. Only if you’re travelling outside Europe do you need to enable them manually (through your bank’s app or website).
- thematrixturtle 4y agoMagstripe is long dead throughout Asia as well. The US (as always) has been behind the curve on this, but contactless became pretty ubiquitous during COVID.
- pornel 4y agoMonzo (UK) doesn't allow magnetic stripes in ATMs unless you enable them in the app. Chip and pin and NFC terminals have been a standard in the UK for over a decade now. I wouldn't be surprised if magnetic stripe readers still exist only for US tourists.
- AnssiH 4y agoFor Mastercard: > The magnetic stripe will start to disappear in 2024 from Mastercard payment cards in regions, such as Europe, where chip cards are already widely used. Banks in the U.S. will no longer be required to issue chip cards with a magnetic stripe, starting in 2027. https://www.mastercard.com/news/perspectives/2021/magnetic-stripe/ https://www.mastercard.com/news/perspectives/2021/magnetic-s... I think it has been over a decade since my last magstripe transaction (in a convenience store I frequented that switched to chip readers in 2010).
- 4y ago
- woodruffw 4y agoI can't help but smile when I see these skimmers. It's amazing how advanced they are! I would love it if my bank would let me use my virtual debit card with a contactless flow to withdraw cash. I'd imagine that's much harder to replay or otherwise manipulate. I've seen some ATMs (mostly Chase?) with the contactless symbol on them, but I've never been able to get them to work.
- powvans 4y agoI always use the Chase Debit cards stored in my Apple Wallet to access Chase ATMs. Works great. You can use the Apple Wallet cards to unlock the ATM vestibule doors after hours too.
- woodruffw 4y agoGood to know that it works with their own cards! I don't actually have a Chase debit card; I was hoping that my virtual debit card would work with their machines :-) (The bank I use does actually use JPMC as their customer bank, so I was hoping that Chase ATMs would see my card as a "whitelabeled" Chase card. But no such luck.)
- jhugo 4y agoATMs with contactless are pretty common in Asia, I use them with Apple Pay quite often.
- TaylorAlexander 4y agoThis is why I really like the added security of the new Apple magnetic wallet I got. The wallet holds your cards and attaches to the back of the phone using magnets. While the inside of the wallet is magnetically shielded, I’ve found it’s nearly impossible when actually handling the magnetic wallet not to accidentally pass the card past the outside of the magnetic wallet. I have found that my card no longer works in pure magstripe readers such as parking meters and other older devices. Having ruined my magnetic stripe, Apple has protected me from mag stripe attacks. An idea so bold, no one but Apple could have thought of the magnetic card wallet.
- wil421 4y agoI’ve had an Apple Wallet since they came out and never had any cards lose their magnetic strip. Same with my wife.
- RC_ITR 4y agoYeah, OP clarified he was using another brands wallet lol. Weird to dunk on Apple implying they underengineer their products. Engineering and (probably) precision manufacturing some magnetic shield is exactly the kind of thing Apple would do. From [0]: According to Apple's site, "the leather wallet is shielded so it’s safe for credit cards." That shield protects both Low Coercivity (LoCo) and High Coercivity (HiCo) cards — which is a fancy way of saying how resistant something is from being demagnetized. So, LoCo cards are considered things like hotel keys and gift cards while credit cards fall under HiCo. [0] https://mashable.com/article/apple-magsafe-iphone-wallet-demagnetize-cards https://mashable.com/article/apple-magsafe-iphone-wallet-dem...
- TaylorAlexander 4y agoSorry if I wasn’t clear, but I’m saying that it’s easy when handling the small removable wallet to accidentally touch the non-shielded side of the wallet. Both my Popwallet and the Apple wallet have essentially the same design. A shielded pouch for credit cards, and a magnetic backing that attaches to the phone. The magnetic back cannot be shielded on the side that attaches to the phone, or it wouldn’t attach to the phone. The problem is not insufficient shielding on the inside of the wallet, the problem is the way apple designed the system. Apple designed a small removable wallet with magnets on one exterior face of the thing. When handling the magnetic wallet I’ve found myself accidentally touching my card to the unshielded side of the wallet. I think the way apple designed it, their solution is “don’t do that”, but it’s very easy to do.
- btown 4y agoI've always wondered about how modern contactless methods are more resistant to skimming. Couldn't someone compromise two machines and essentially MITM the NFC communcations, intercepting the card's response from the first machine, and replaying it against another remote machine, along with the PIN recorded from a camera? Though I suppose the ATM company could combat this by encoding the machine's ID or a nonce with the message that the card's smart chip responds to, so it only works when replayed on that first machine - is this what happens in practice?
- kaladin-jasnah 4y agoFrom my understanding you can't really skim these cards as the cards sign some piece of data using a private key stored only on the card that never gets exposed in the transaction. I might be _totally_ wrong though.
- woodruffw 4y agoThat's pretty close: the private key alone can't prevent replays, since any material generated from just the private key could be recorded and replayed. Instead, the card mixes its private key with a nonce to produce a session key.
- woodruffw 4y ago> Though I suppose the ATM company could combat this by encoding the machine's ID or a nonce with the message that the card's smart chip responds to, so it only works when replayed on that first machine - is this what happens in practice? Yes, more or less. The chip and contactless flows defined by EMV both require the card to generate a nonce for the transaction. The terminal also generates its own nonce[1]. [1]: https://www.cs.ru.nl/E.Poll/papers/EMVtechreport.pdf https://www.cs.ru.nl/E.Poll/papers/EMVtechreport.pdf
- tialaramex 4y agoUnfortunately "random" is a headache for a certain type of bureaucrat. They can't really do "random" or "unpredictable" and it needs somebody who actually understands what is going on to sit down and walk through how they can check whether to tick this box. For the Web PKI we had this problem extensively. No, if you set the top bit of this 128-bit integer, that's not 128 random bits. That's 127 random bits, the top one isn't random any more, see? Anyway, the EMV test spec tells them to ensure the numbers are different not that they're random even though the cryptography requires randomness to work. So if you make terminals, the way to ensure you pass is not to use random numbers, as there's a tiny chance a random number fails the test. To pass, just ensure you emit a sequence of different numbers. For example 1, 2, 3, 4, 5. That's not random at all, but it's different and so it passes the test. As you would expect this is an exploitable bug. Light Blue Touchpaper covered this years back.
- divbzero 4y agoI like how this old-fashioned security measure still applies: Lastly but most importantly, covering the PIN pad with your hand defeats one key component of most skimmer scams: The spy camera that thieves typically hide somewhere on or near the compromised ATM to capture customers entering their PINs.
- timo555 4y agoAnother low-tech thing I have done to protect myself is I have physically cut the numbers off my cards with scissors. My name and expiration date are still there. This way when I pay at a restaurant in the US and the card is out of my sight I don't worry about someone writing down the card details. So far not a single business has refused me when I hand them my modified card with the numbers cut off.
- memco 4y agoSome companies issue their card without the numbers written on them so I don’t think it’ll be concern.
- db48x 4y agoAlthough you will be out of luck in the very rare situations where the merchant has to fall all the way back to a completely offline transaction on paper. Usually they use a little plastic roller device that impresses the number onto carbon paper to reduce errors, which is why they were embossed rather than printed in the first place.
- jlawson 4y agoCan I be safe against this if I just put electrical tape over the magnetic stripe on the credit card? Or any other kind of covering. If I ever actually need it (very rare) I can just pull the tape off.
- MBCook 4y agoI wonder if the stripe material would survive.
- kube-system 4y agoI wouldn’t do that for ATMs and the such that suck your card inside, for fear it would get stuck.
- randyrand 4y agoElectrical tape does not block magnetism.
- emkoemko 4y agowhere do you live that banks allows you to even use the strip? once we got chips like 10+ years ago banks have since disabled the strip, i mean why have a chip if your card is going to get fraud ? defeats the purpose of it
- chadlavi 4y agoThe US
- CarbonCycles 4y agoSeeing the same thing in readers at the gas pump...Austin and surrounding areas have been hit hard w/ them.
- quickthrower2 4y agoHopefully we can go contactless on ATMs. Seems antiquated to insert a card.
- grishka 4y agoWait, there are still places in the developed world where there are no contactless ATMs?
- Macha 4y agoWe dropped magstripes over a decade ago for chip and pin (though cards still ship with them for use overseas), and pretty much every payment terminal in stores have supported contactless for two years, but I haven't seen a contactless ATM here in Ireland - I assumed there was some liability reason they wanted chip and pin
- grishka 4y agoHere in Russia you still have to enter the PIN after you tap the card. You used to be able to tap with your phone too, back when Google Pay and Apple Pay worked.
- MBCook 4y agoHa. Honestly I’m having a blast at all the reactions from Europeans (and others) in this thread. The large local bank in my city doesn’t support it. Their ATMs only started using EMV as few years ago. I’ve seen contactless on national chain bank ATMs once or twice but I don’t think it worked for me for some reason.
- chadlavi 4y agoNo, but here in the US they're rare.
- jabroni_salad 4y agoI've only seen one contactless ATM in my life and it's at a wells fargo, which I refuse to do business with.
- woofyman 4y agoI lock my ATM cards and only unlock them when I need to get cash.
- 0x53 4y agoI do this too. My banks mobile app takes just seconds to unlock the card.
- therealmarv 4y agoI don't use any card where you cannot deactivate the magnetic stripe entirely by software. This way the magnetic stripe gets useless because transactions through it are blocked. I live in Europe and nearly never need the magnetic stripe (one big exception was one ATM which would not work without it).
- alostpuppy 4y agoDoes it make sense to preemptively demagnetize your cards?
- fortran77 4y agoSince cards have relatively recently gone to not having embossed numbers, the card slots are now probably just a little bit wider than most new cards, allowing a device like this to fit.
- emkoemko 4y agonot here cards still have embossed numbers
- MBCook 4y agoDepends on the card in the US. One card I got very recently had them, one card I got very recently didn’t. Since they don’t serve a purpose anymore since absolutely no one uses the old carbon copy system… I’m a little surprised they lasted this long.
- roguesherlock 4y agoDo people not get any messages when they make any transactions? In my county you literally get messages for every transaction. And you also have to add in otp for every transaction online.
- CSMastermind 4y agoNo - I only get asked for approval on particularly suspicious transactions, normally based on amount, merchant reputation, and geography. I believe this difference is because in the US merchants are on the hook for fraudulent transactions and in the rest of the world the customer is on the hook. So if someone steals my card and makes a bad transaction, I just go into the app, flag it as fraud/not me and no money comes out of my bank account. The merchant ends up eating the cost because it's better for them to eat a small fraud percentage than to add more friction to the checkout process.
- roguesherlock 4y agoThat’s very interesting. At the same, it is just better to have notifications for all parties involved ?
- Mountain_Skies 4y agoThat's opt-in but I think every credit card company in the US offers to alert you by SMS or app notification when a transaction has been made. I have that setup for my cards but it is annoying each month when the internet bill hits my card because they do their processing at 3am.
- ruskyhacker 4y agoFunny, sawthisbon discover and immediately wondered if this was on HN. Anyway, I have a few of these I use for pentests / audits https://electroniccats.com/store/huntercat/ https://electroniccats.com/store/huntercat/ I've caught and reported two pumps at fuel stations near where I live. One of them I watcheded when the police showed up and with the fuel station employee removed the ble module storing the data.
- sbf501 4y agoThat's a really cool store. I'm surprised they went all in on SAM MCUs for lots of their stuff, as I don't think the Atmel SAM product line has much of a future since being purchased my Microchip (although that was 6 years ago).
- MerelyMortal 4y agoThat's cool! I think though for gas pump skimmers, there are devices that plug into the pins of the OEM card reader and just copy the data straight from the OEM card reader. (The thieves just get a universal gas pump key to open up the cover and install their device inside the pump, which is why you see those tamper stickers.)
- ruskyhacker 4y agoYeah, I've seen a few different implementations of this. The pump one I was able to watch them remove had a clone skimmer attached where your card goes which sent it's data to a bluetooth module hidden inside the service door.
- m4jor 4y agoSo how many stripe heads is a normal reader supposed to have VS one that has a skimmer overlay on it?
- amelius 4y agoAt this point the magnetic strip is purely the responsibility of banks, and probably a calculated risk as well.
- deleted 4y ago[deleted]
- walrus01 4y agoAny ideas on the manufacturer and model of that battery?
- userbinator 4y agoNo, but it's not exactly an uncommon thing --- search "ultra-thin lipo" and you'll find plenty.
- walrus01 4y agoFor all the people saying why not use chip and pin cards for all your payments, using cash is EXTREMELY common for day to day small purchases in NYC and doesn't seem to be going away any time soon.
- LeonB 4y agoSome people say NYC is like a separate nation, but that’s naive, it’s a separate planet.
- Melatonic 4y agoI swear I was hit by one of these once when I used my card in a parking meter in LA that was not working with tap
- onetimeusename 4y agoThis makes me wonder who manufactures these. Are they made as custom devices by a criminal group to commit the crime? Are they manufactured in another country -yes, that one- and you can buy them on the darknet? Did the group buy one of these ATMs to build the skimmer or possibly get inside information from someone at the company?
- derefr 4y agoYou don't even need the darknet; there are plenty of clearnet carding forums. Just search "carding forums" — they're right there, hanging about in the open, all Google-visible and everything. (There are dark-web ones, too, but they're not really any different than the clearnet ones.) From a few cursory searches, it seems like 1. people generally build their own skimming tools by following guides; and 2. this isn't organized crime, but usually just some really obsessive individuals thinking they can get rich quick. (If you think about it, the incentives for selling the skimming tools themselves are all wrong: if someone with sloppy OpSec buys your tool and uses it, and it gets into the bank's hands to be studied, they've now ruined it for all your other customers.)
- deleted 4y ago[deleted]
- emkoemko 4y agowho is still using these old card? don't they expire? i mean its been like more then 10 years since we all switched to chipped cards i don't even know any place that has a strip reader or any bank that has them even enabled, i mean whats the point of adding a chip for security if your still allow strip readers...
- MBCook 4y agoAbsolutely everywhere in the US has them. They exist for two purposes: first they’re used for fall back if there’s a problem with the EMV chip. Second I’m not aware of any gift cards (except perhaps prepaid debit cards) that have EMV chips. So if you buy a $20 gift card to Home Depot for someone that’s going to be magstripe. Honestly I didn’t start seeing EMV/contactless available on gas pumps until about 18 months ago.
- gcanyon 4y agoThe article suggests using the contactless sensor, but how is that not another potential "skimmer" device?
- devman0 4y agoContactless uses a cryptographic operation to secure the transaction, both reader and chip are active participants. Compare with magstripes which are passively read and thus trivially subject to replay attacks.
- gcanyon 4y agoThanks, I figured this was likely the case, but I didn't know the details.
- josh2600 4y agoContactless checkout has a different security scope for card issuers. Magstripe + Pin is reusable, contactless auth has protections that bind the key exchange to that specific merchant and multiple pay auth attempts from a merchant get throttled. I haven't looked into it, but I would guess that there's a key exchange with the reader that binds the contactless payment to that reader in such a way that the card produces a signed unique identity that proves it is the card without leaking the actual card numbers to the reader. Just a guess, but that's how I would want to build something like this. You don't have that much room on a chip but way more than a magstripe. (Security pattern: something you have that is time/merchant delimited) I believe that in magstripe they just have a strip magnetized to produce some digits + your pin (Security pattern: something you know + something you have).
- gcanyon 4y agoI figured there was likely a cryptographic aspect, but I don't know the details.
- gtirloni 4y ago> However, there are a great many smaller businesses in the United States that still rely on being able to swipe the customer’s card. Who are these businesses? Seriously, stop issuing cards without chips and send new card readers to theses businesses. End of story. Is it because US businesses use deeply embedded card readers in custom POS machines that aren't modular? Everywhere I go in South America and Europe, businesses have portable readers. The card companies just sent them new readers and they were accepting chips overnight. Same when NFC was introduced. The US payment and banking systems are truly maddening.
- bobsmooth 4y agoIt's because of tiny gas stations in the middle of nowhere.
- Mister_Snuggles 4y agoGas stations are interesting here. Here in Alberta, it's the law that you need to pay before you pump[0]. If you're at a modern pump you insert your card, it does a preauth for some amount (you can select common amounts, like $20 of fuel, or "fill up" which is like $125 or $250 depending on the station), then when you're done it does a purchase for the exact amount. If you're not at a modern pump, or you're paying cash, you have to go into the store, prepay for something that you think will fill your tank, fill your car, then go back into the store and get your change. [0] https://calgary.ctvnews.ca/station-owners-and-gas-and-dash-victims-loved-ones-welcome-alberta-s-mandatory-prepay-legislation-1.3952349 https://calgary.ctvnews.ca/station-owners-and-gas-and-dash-v...
- aidenn0 4y agoUS is the same, except the pre-auth is set by the gas station owner, so you may need to go inside to pay with a debit card with less than that amount, and large trucks need two transactions to fill up
- dymk 4y agoUSPS delivers to them, guaranteed
- deleted 4y ago[deleted]
- Joel_Mckay 4y agoJust imagine how financially successful these folks could be if they put halve that amount of effort into some legitimate projects. =)
- thenoblesunfish 4y agoTo highlight the action item from the end of the article: for this attack to work they need a video of your PIN from a nearby hidden camera, so cover the PIN pad with your other hand as you enter your PIN! (I always thought this was paranoia, but apparently not)
- tgsovlerkhgsel 4y ago> crooks can then clone payment cards and use them to siphon money from victim accounts at other ATMs. How? I thought all ATMs ignore the magstripe and just read the chip nowadays.
- zinekeller 4y agoThe US is just so backwards on this. a) You can still run transactions as magstripe-only transactions (without any PIN or even signature required) or b) copy the security code (which on most American cards are also encoded on the magstripe) and use it online (CNP transactions). If you're familiar with 3D secure, most American banks and merchants don't require 3D secure to buy.
- tgsovlerkhgsel 4y agoI'm aware of that, but this comment alleges that the clone can be used to withdraw money at an ATM, which I am skeptical of.
- ncmncm 4y agoSeems like you ought to be able to buy bismuth foil tape to put over the mag stripe, and block any sort of reader. It's not like most of us ever need to use it. Or erase your stripe.
- notfed 4y agoSolution: clear your magnetic strip. (Actually I haven't done this. But really, shouldn't it be that simple?)
- zR4B 4y ago> Once you become aware of ATM skimmers, it’s difficult to use a cash machine without also tugging on parts of it to make sure nothing comes off. But the truth is you probably have a better chance of getting physically mugged after withdrawing cash than you do encountering a skimmer in real life. So keep your wits about you when you’re at the ATM, and avoid dodgy-looking and standalone cash machines in low-lit areas, if possible. When possible, stick to ATMs that are physically installed at a bank. And be especially vigilant when withdrawing cash on the weekends; thieves tend to install skimming devices on Saturdays after business hours — when they know the bank won’t be open again for more than 24 hours. Lastly but most importantly, covering the PIN pad with your hand defeats one key component of most skimmer scams: The spy camera that thieves typically hide somewhere on or near the compromised ATM to capture customers entering their PINs.
- whywhywhywhy 4y agoIt's absurd anyone thought those stupid translucent green plastic things would solve any of this, if anything more surfaces and greebles on the ATM just make it easier to hide a skimmer. If the surface was a razor thin slot on a completely flat surface you'd struggle to hide anything on it. Instead we have this stupid giant hunk of plastic that doesn't even look like part of the machine anyway.
- t_mann 4y ago> However, there are a great many smaller businesses in the United States that still rely on being able to swipe the customer’s card. That's why you usually need an external push to advance security. Manufacturers/businesses didn't drop CFC, lead, asbestos,... voluntarily, usually there's fierce resistance. Wireless tap payment terminals run for less than 50 bucks in retail stores, it's a negligible expense for any business (that's why you even see them among street vendors, restaurants where each waiter has their own terminal...).
- verisimi 4y agoI see this as part of the 'war on cash'. Cash itself cannot be skimmed etc - but when you use your card, it can be. The problem appears to be the use of ATMs to get cash out - the message is that its risky. Of course, if there were banks, and you were able to get cash out in ye olde fashioned way, this wouldn't be a problem. The point I'm trying to make is that technology introduces risks that cannot really be quantified - you won't even know that someone has stolen from you for a while by cloning your card (a few hours/days) - with cash if it is stolen it is obvious immediately. This lack of access and ability to get an accurate picture of your finances is not going to get better with crypto.
- asib 4y ago> Lastly but most importantly, covering the PIN pad with your hand defeats one key component of most skimmer scams: The spy camera that thieves typically hide somewhere on or near the compromised ATM to capture customers entering their PINs. > Shockingly, few people bother to take this simple, effective step. I haven't taken cash out of an ATM (or carried cash altogether) for years now, but I never really used to do this as I always assumed it was protecting against the threat of someone looking over your shoulder and then subsequently mugging you. If I ever end up using a cash machine again, I will be sure to cover the digits. Thanks Krebs!
- toss1 4y agoKey security measure, and it is trivial - just start it as a new habit, and remind all your family & friends who didn't read the article. >> most importantly, covering the PIN pad with your hand defeats one key component of most skimmer scams: The spy camera that thieves typically hide somewhere on or near the compromised ATM to capture customers entering their PINs. >>Shockingly, few people bother to take this simple, effective step. Or at least, that’s what KrebsOnSecurity found in this skimmer tale from 2012, wherein we obtained hours worth of video seized from two ATM skimming operations and saw customer after customer walk up, insert their cards and punch in their digits — all in the clear.
- ChoGGi 4y agoIf you're not in America, grab a magnet for your mag stripe. I'm in Canada and have yet to encounter a need for it.
- David3231 4y ago