23 ms·
Train doors require GPS signal to open despite stations being underground (2014)
- crazychrome 12y ago> ... and trains have needed to be rebooted. Since when that default solution to any problem of any device embedded with CPU, is to reboot? Welcome to the digital age!
- cnvogel 12y agoOh, probably you can avoid the reboot by changing the access level to "Service" (username: service, password: service123), choose "Disable all Safety Systems", click "OK" on the dialog popping up telling you that this is forbidden when operating on public rails and having passengers, and just continue driving. [yes, completely made up, but corresponds to what's happening daily in other, probably slightly less safety critical, industrial automation systems]
- sukilot 12y agoSince the digital age started, aka when CPU was invented. Rebooting and erasing all rewritable memory gets the system into a known good state.
- jpindar 12y agoLots of embedded systems reboot themselves when they get into some unknown state. It's the safest thing to do. Microcontrollers are designed to do it automatically in some cases. People generally don't notice because the system doesn't beep or display a boot message (if it even has a display).
- ceeK 12y agoI actually experienced this in St Pancras International last week! The train stopped in the station, but the doors didn't open for a good 5 minutes. The driver issued a statement stating that there'd be a slight delay before the doors opened. I recall thinking: what possible reason could there be for not opening the doors? Congestion? Electric failure? Well, turns out it's the most ludicrous one.
- deleted 12y ago[deleted]
- themartorana 12y ago"...and the trains have needed to be rebooted." Nope. No thanks. Do not need my trains to be so "smart" that the only way to get them working properly is CTL-ALT-DELETE. Seriously.
- vinceguidry 12y agoGives a new meaning to the term, "crash-only software".
- pilif 12y agoI once had the opportunity to drive along in a locomotive here in Switzerland. En route, the computer has detected an issue in the engine, has restarted the whole machine and came back up fine. This happened while driving at 160 km/h and if we had not seen the messages on the screen, nobody would have known. That was seriously impressive and I wish I could do something like this. Not only did it properly detect the failure, it also rebooted and then came up correctly and still was aware of all the state needed to drive on. If software works like that, I can live with it being used more and more.
- mike_hearn 12y agoI'm not sure if that's impressive, or if I should be scared that trains randomly reboot their engines whilst in motion and nobody seems to care or investigate?! What kind of issue can be resolved by rebooting an engine, exactly?
- Hello71 12y ago> However, we are aware that there are still occasional problems, which results in the Driver having to either manually tell the train where it is via the "location not found" option in the TMS, or in the event of that not working, using the emergency door release option in the train management system. So... we added GPS to the trains so that doors could only be opened at stations. Then, we realised that this was a terrible idea and probably against safety regulations, so we added a function to do this anyways but buried it in menus so it couldn't be accessed in a real emergency. Sounds like a manglement-directed idea if I ever heard one. Edit: To clarify, I meant that if there is a manual release for the doors... what's the point of the GPS system?
- hahainternet 12y agoI very much doubt this is related to emergencies. Don't you feel it's a bit dishonest to use words such as "we" when it seems you haven't a clue how this actually works?
- TillE 12y ago"There are concerns that this could delay an emergency exit if an incident were to occur, leaving passengers at risk."
- danparsonson 12y agoIndeed, the proximity between "emergency door release" and "train management system" is a bit disturbing in that sentence (that is, if we assume 'system' to be 'computer system' which needn't necessarily be the case of course)
- gus_massa 12y agoIn most industrial setups, you have a normal stop procedure and an emergency stop procedure. The emergency stop procedure is a big red button that you are not supposed to use unless it's an emergency. They fire you if you use the emergency button in an everyday situation. I guess that in an emergency you can open all the doors with a big red open button in the train driver cabin, and that in each wagon there is another red button (protected by a breakable glass, to prevent pranks).
- lyso 12y agoSite seems to be down, here is a text-only cache: http://webcache.googleusercontent.com/search?q=cache:Z4ZDqEMjgu0J:www.ciras.org.uk/report-library/train-operations/52131-issue-with-opening-class-377-doors-on-the-thameslink-route/&hl=en&gl=uk&strip=1 http://webcache.googleusercontent.com/search?q=cache:Z4ZDqEM...
- bonaldi 12y ago> Operation of Class 377 train doors require a (GPS) signal to identify that the train is in a station to allow the Driver to open the doors. Effectively this prevents the doors being operated in error when the train is not at a station and as such is a safety feature of the trains. Was there some epidemic of doors being opened outside stations that I missed? This smacks of a solution looking for a problem
- blibble 12y agoit's more common that the driver opens the doors on the wrong side, or at a short platform opens all the doors instead of, say the first 8
- smcl 12y agoOh god, opening doors on the wrong side would be absolutely terrible in rush hour - people back away from the door they think will open, and squeeze a few people out the other side onto the live wire, or perhaps into the path of a train arriving from the other direction.
- Hello71 12y agoWhy would it be an issue if you opened more doors than necessary? I'm assuming that the edge of the platform will always match the edge of a car, and that it is not possible to board off-platform cars (otherwise they wouldn't be off-platform), and that there will be no people in the "off-platform" cars. Otherwise, how would they get off? It seems extremely inefficient to start the train just to move it half its length, then stop it again.
- manicdee 12y agoSome trains will have 8 cars but stop at some stations with only 4 cars worth of platform. The passengers heading to those station usually knowmto board the first four cars. The difficulty arises when doors are accidentally opened for all cars at 4-car platforms. No, the train does not move forwards by 4 cars, it simply stops, passengers board and alight from the front four (including a rush of passengers frommthe back four cars who forgot that their station is a four-car stop), then the train leaves.
- TillE 12y agoThe only advantage GPS would have is that you don't have to install something (eg, a powered RFID tag) in each station. And yet, they've had to install "GPS repeater beacons" to work around this problem. Sounds like a typical case of bad design.
- mikeash 12y agoSomebody decided that GPS was a good idea here, and didn't think about problems underground. Silly, but understandable. Somebody else decided that having doors controlled by location was a good idea here, and didn't think somebody would specify a system that doesn't work at some stations. At some point during procurement and installation of the equipment you'd think somebody would have raised a red flag. Unless, of course, they were simply told to install GPS equipment, and not why. Or they were told why but nobody listened to them when they explained why it wouldn't work right. Sounds to me more like bad organization than bad design, although of course it's hard to tell from this distance.
- tjoff 12y agoThe GPS solution should have been shot down on sight - regardless of where in the process it was made up. The only sensible reason for this is that someone responsible had a friend that sold GPS-beacons.
- rcthompson 12y agoI don't think the choice of GPS for a train system is understandable at all.
- kalleboo 12y agoThe buses where I'm from started using the odometer to show the next station on a digital sign some time in the 90's. This ought to work even more accurately on a train.
- mike_hearn 12y agoOnly on underground stations. Possibly most of the stations this class of train stops at are above ground, and it made sense there to avoid big station upgrade works. Just one little GPS receiver on the train instead. You can see how it could happen.
- sandworm 12y agoSo what happens in a power failure? I can see the need and advantage of a system to make sure that only the appropriate doors open at certain stations, but surely this could have been done with information at the local level. Barcodes, NFC, RFID ... to go with sats hundreds of miles in the sky augmented by repeaters is overly complex. Passengers are not cattle. I don't see why they cannot have local door control when the train is stopped for more than 5/10/15 minutes. The risk of death by idiot openign wrong door surely is less than the risk of death by fire/poison gas/axe murderer, all of which have happened on trains.
- sukilot 12y agoYour claim needs evidence. A hypothetical murderer could open a door and push people out, no weapon necessary. In a fire, passengers could fall out a door onto third rail.
- pbhjpbhj 12y agoBut are those risks less than the risk that in an emergency the doors can't be opened at all and the entire carriage of passengers are effected, eg burnt alive? The old system of windows that slide down with a handle on the outside of the carriage seemed to work pretty well - hypothetically you could open the door and push people out or fall on the track. Wonder how many times that happened?
- a3n 12y agoFFS. A line in the station that the operator pulls up to, and two handles in the cab that have to be operated in sequence and simultaneously. And now the operator can open the doors whenever and wherever necessary, even while the train is rebooting. Or were masses of people trapped in cars in the decades of operation prior to this, because the operator couldn't figure out where he was and wouldn't/couldn't open the doors?
- hobs 12y agoWhy wouldnt this using something like radio waves in each station from a few sources, wouldnt it be super easy to tell your position fairly accurately with just a few radio sources? I did some googling and indoor localization systems can determine your location down to 3cm, I think that would be way more accurate than the 50m or so I have observed of GPS units while they moves around. And obviously they would be 10000x louder than the gps signal, so you couldnt lose it unless someone was purposefully interfering with the signal.
- cesarb 12y agoOr with a balise (https://en.wikipedia.org/wiki/Balise https://en.wikipedia.org/wiki/Balise).
- hobs 12y agoThis seems like the actual solved answer to the problem, thanks!
- nemetroid 12y agoI agree. The entire thing sounds a bit like running a web-based Javascript solution on an embedded system because that's the only technology you're familiar with.
- kalleboo 12y agoOr an odometer (wheel revolutions) which is what buses often use and the technology is over 2000 years old[0] and quite cheap and reliable [0] http://en.wikipedia.org/wiki/Odometer#Classical_Era http://en.wikipedia.org/wiki/Odometer#Classical_Era
- davidmturner 12y agoThis was the reason I was given at London Victoria Station for the doors taking a long time to open. Oh for the days when the doors weren't controlled by a computer, and passengers could open the windows -- always a joy when the air conditioning fails.
- davidmturner 12y agoThis was the reason I was given at London Victoria Station for the doors taking a long time to open. Oh for the days when the doors weren't controlled by a computer, and passengers could open the windows -- always a joy when the air conditioning fails.
- webmonkeyuk 12y agoPastebin of the text http://pastebin.com/raw.php?i=u4VrqmNe http://pastebin.com/raw.php?i=u4VrqmNe
- webmonkeyuk 12y agoOr the PDF published version of the report https://drive.google.com/file/d/0B-ojoEvI-qk7UW03XzhuRVNzOG8/view?usp=sharing https://drive.google.com/file/d/0B-ojoEvI-qk7UW03XzhuRVNzOG8...
- jimktrains2 12y agoI find it difficult to believe this was all deployed without manual overrides. What about in the case of an emergency? Also, isn't the first objection to GPS anything usually "it doesn't work well in buildings or around buildings"?
- cstross 12y agoSigh. Someone tell Bruce Schneier his new movie plot terror threat[1] is here: someone homebrews a GPS signal transmitter to open all the train doors at rush hour ... preferably on the wrong side. [1] https://www.schneier.com/essays/archives/2005/09/terrorists_dont_do_m.html https://www.schneier.com/essays/archives/2005/09/terrorists_...
- rasz_pl 12y agoSounds pretty secure http://www.labsat.co.uk/index.php/en/ http://www.labsat.co.uk/index.php/en/ lol
- verytrivial 12y agoI catch these trains every day. People are confused by the warning about a "slight delay" from the driver as we approach the stations. I occasionally say "GPS doors" and everyone who was previously confused instantly adopts a "seriously?!" face. I have NO idea how such a knuckle-headed design flaw can make it all the way through design and build with even minimally aware designers and engineers in charge.
- deleted 12y ago[deleted]
- sitkack 12y agoReinforces every stereotype I have about British Engineering(tm), precision watch gears cut with a hacksaw. 400 Hp steam powered lawn mowers. Jaguars.
- Jamie452 12y agoWhats wrong with an open close button that can only be activated when the train is stationary and brakes are applied?
- maxerickson 12y agoIn one of the threads here someone points out that different doors should be opened at different stations (sometimes different sides of the train, I think sometimes not all of the doors on one side). Which explains why they want it to be location dependent, it doesn't excuse the poor implementation.
- chinathrow 12y agoSomeone in that procurement department should be fired for ordering a door stystem built on faulty, expensive and flawed logic. Yesterday.
- TazeTSchnitzel 12y agoI can't believe HN is reacting to this as if checking location is a bad idea. It does have an emergency override. On the underground, particularly during rush hour, doors opening on the wrong side, or in the wrong place, could cause people to fall out of the train onto the tracks, in the dark, and risk serious injury or even death (especially with electrified rails). And using GPS and repeaters in the few spots where the signal's poor sounds like a practical and cost-effective approach. Given the issues, perhaps they should've implemented it some other way, but it's hardly the ridiculous solution you're all making it out to be. As superuser2 mentions below, there's even a non-safety reason for this feature: long trains in short stations. https://news.ycombinator.com/item?id=9203351 https://news.ycombinator.com/item?id=9203351
- fche 12y agoUse of broadcast signals like GPS for safety-critical purposes makes them a target for adverse interference - like a jammer hoping to mess with / trap people on the train.
- gkoz 12y agoAdding a complex and unreliable dependency that has to be reimplemented underground and isn't really needed (because you don't need the GPS coordinates, just a little bit of local metadata)? Not ridiculous at all.
- sitkack 12y agoUsing an unauthenticated, jammable signal for a safety critical function is wrong, not something dictated by the practicality or expediency of the solution. It is absolutely wrong and stupid. Like Therac stupid. And as someone mentioned below, there is already a solution for this exact problem; https://en.wikipedia.org/wiki/Balise https://en.wikipedia.org/wiki/Balise
- icebraining 12y agoCouldn't one "jam" the balise by throwing a large rock at it?
- 12y ago
- joezydeco 12y agoJust a reminder that stories like these are regularly accumulated and curated by the ACM's Committee on Computers and Public Policy, known as the RISKS Digest. In the pre-web days you might have remembered this as Usenet's comp.risks. Peter G. Neumann has been moderating this publication online for almost 30 years now. Always interesting reading. RISKS Digest: http://en.wikipedia.org/wiki/RISKS_Digest http://en.wikipedia.org/wiki/RISKS_Digest Current Issue and Archives: http://catless.ncl.ac.uk/Risks/ http://catless.ncl.ac.uk/Risks/ 1994 Book: http://www.amazon.com/Computer-Related-Risks-Peter-G-Neumann/dp/020155805X http://www.amazon.com/Computer-Related-Risks-Peter-G-Neumann...
- hlandau 12y agoThere are a few issues here. SDO, CSDE: Firstly, some platforms are too short to fit all of the doors on, especially with the lengths of trains being extended. Thus at some platforms it is necessary to ensure that the first or last doors of the train, or both, are not unlocked. The London Underground has its own system to do this (https://en.wikipedia.org/wiki/Selective_Door_Operation https://en.wikipedia.org/wiki/Selective_Door_Operation ). Here it appears they decided to use GPS, but the LU almost certainly uses a much simpler (and more reliable system). Of course, if a GPS fix isn't obtained, you don't know whether you're at a short platform or not, so you can't assume anything. A related safety issue is whether drivers open the doors on the right side of the train (!). Yes, believe it or not, they sometimes get this wrong. When the London Underground moved to one-man train operation (meaning that the doors were controlled by the driver, rather than by a separate guard), they had some issues with this happening. They responded by introducing a simple, low-level system called "Correct Side Door Enable", which uses an electrical loop by the side of the track in platforms, which is detected by the train and allows the train to determine that a) it is in a station and b) which side the platform is on. This prevents the driver from opening the doors in error. You can find some information on CSDE here: http://www.trainweb.org/districtdave/html/correct_side_door_enable.html http://www.trainweb.org/districtdave/html/correct_side_door_... I would guess that the LU's SDO system uses some similar or even interrelated mechanism. Metro vs. Rail: Note that on metro trains (e.g. the majority of London Underground trains) the doors usually open automatically, whereas on other trains you have to press a button to open the doors once it illuminates. This makes the potential consequences of accidentally opening the doors on the wrong side worse on tube trains, especially when you consider how packed they can get. Whereas with a train like the class 377, a driver would have to unlock the door on the wrong side and then the passenger would have to accidentally open the door on the wrong side. So the consequences of accidentally unlocking the doors on the wrong side is not -that- severe, which makes the apparent difficulty and obscurity of the overrides available to the driver (plus the implication that the drivers aren't properly trained on their operation) all the more ridiculous. (A particularly curious variant is found on some trains of the Paris metro; the doors try and open as soon as the driver tells them to, but a mechanical latch on the doors prevents it. A passenger has to move up the latch before the doors can open. The latches were probably retrofitted, perhaps to mitigate unnecessary heat loss, but it also serves as a safety measure. This system has the advantage over a button-based system that a malfunctioning microcontroller cannot randomly open a door at inopportune times, though this is a rather academic advantage given that I am unaware of such cases.) I have myself ridden the 377, and on one occasion I did notice an unusual delay before the doors unlocked, of about a minute, which involved the "door out of order" lamp momentarily flashing on and off a few times, perhaps suggesting some sort of train reboot. I find the term 'GPS repeater' strange. The nature of GPS would lead me to believe that 'repeating' GPS would be rather difficult, though I could be mistaken. It seems more likely that by 'GPS repeater' what they actually mean is some sort of overriding 'you are at station #27' signal, perhaps implemented much like the LU's CSDE system. The Wikipedia page for SDO seems to confirm this (https://en.wikipedia.org/wiki/Selective_door_operation https://en.wikipedia.org/wiki/Selective_door_operation - note that 'Thameslink' and 'First Capital Connect' are effectively synonymous). The idea that not being able to quickly open the doors is a safety issue seems quite peculiar to me. On the 377 and all non-metro trains, all doors are fitted with passenger-operable emergency releases. There are also somewhat anonymous emergency releases which could be operated from outside the train by platform staff. Both such releases are mandated and governed by railway standard GM/RT2473 (which can be found here, along with some rail accident reports referencing it: https://www.google.co.uk/search?q=gm/rt2473 https://www.google.co.uk/search?q=gm/rt2473 ) That said, there is one way in which the Class 377's doors are implemented in an obviously deficient way: if you hold down the open button before the doors are unlocked, the doors will not open when they are. You then have to release and re-depress the button. In other words, whoever programmed the door erroneously chose an edge-triggered behaviour rather than a level-triggered one. This is in contrast to the buttons on the Class 319 (which the Class 377 is replacing), which behave correctly. I previously ranted about this here: http://www.devever.net/~hl/train377 http://www.devever.net/~hl/train377
- TYPE_FASTER 12y agoSomebody probably opened the wrong side once and a passenger fell out and sued... We'll see more positive train control as the technology gets cheaper: http://en.wikipedia.org/wiki/Positive_train_control http://en.wikipedia.org/wiki/Positive_train_control It doesn't replace operators, but instead enforces speed limits and stops. It hasn't been implemented in more trains mostly because it's expensive.