7 ms·

There is a really interesting generation gap issue in the replies to your comment. What I perceive as younger people are horrified at the idea of fifty year old

There is a really interesting generation gap issue in the replies to your comment. What I perceive as younger people are horrified at the idea of fifty year old tools while the older folks are thinking (I imagine) “if the tools have lasted that long they must be well-honed and very good”. Of course, this could simply be the perspective of someone turning 50 this year.

fidotron 1y ago
I'm somewhere in the middle, young enough that almost everything I've seen new is disposable crap (including the tools), old enough that I have had an interest in things from before and noticed that they really were built much better, or at least heavier, back then. I've made the comment on here before that I believe it's short term energy optimisation, in that it used to be seen as reasonable to much heavier objects around. We've made everything so light we've lost the infrastructure for moving heavy stuff around when we might need to. Kids today have no concept of how heavy workstations, TVs or monitors used to be, and they think it's exaggeration. Let alone tools, cars, appliances etc.
- nradov 1y ago
  Cars haven't gotten any lighter. Rather the reverse. Battery packs are quite heavy.
  - kenhwang 1y ago
    Even non-EVs have gotten quite a bit heavier due to the inclusion of more structural safety features and creature comforts.
    - red-iron-pine 1y ago
      arguably the biggest driver is simply the cost of oil. crumple zones made of styrofoam and plastic bumpers arn't making things heavy. e.g. https://www.forbes.com/sites/samabuelsamid/2019/01/03/new-vehicles-keep-getting-heavier-or-are-they/ https://www.forbes.com/sites/samabuelsamid/2019/01/03/new-ve...
      - kenhwang 1y ago
        That article is being disingenuous and wrong. It's comparing the lightest possible Civic configuration with the heaviest possible Accord of a different body type. The 2000 Accord sedan is 2,712lbs, not 2,987lbs (which would be the wagon). The 2019 Civic sedan is 2,743–2,923lbs depending on equipment/trim. So yes, the Civic compared to an older car of similar size did get heavier. The Miata proves that cars don't have to be heavier, but the Miata also took advantage of much more aluminum compared to the older models. Maybe mainstream cars should also switch to use more aluminum to keep weight down, and you're right that the reason they don't is because oil is cheap enough where weight isn't a priority enough to use more expensive aluminum instead of steel.
        Dylan16807 1y ago
        > That article is being disingenuous and wrong. It's comparing the lightest possible Civic configuration with the heaviest possible Accord of a different body type. Good to know. > So yes, the Civic compared to an older car of similar size did get heavier. If the minimum is 1% heavier and the maximum is 2% lighter then I would not say "did get heavier".
        kenhwang 1y ago
        You can only make the argument that the Civic is "2% lighter" when it is being compared to a wagon; apples to oranges comparison that invalidates the whole comparison. They picked that specific year Accord because it's the same size as a sedan as that specific year Civic sedan, so it makes no sense to then compare the weight to the much larger Accord wagon variant. You might as well compare the sedan to a crossover to argue that the sedan didn't get heavier. The range is 1% heavier to 7% heavier comparing the sedan to the sedan. Both ends of the range are heavier, so "did get heavier" is an accurate statement.
        Dylan16807 1y ago
        Okay I misread you then, but you're saying the 2000 Accord sedan only has one weight, while the Civic has a several percent range? If that's right then do we know which Civic trim is equivalent to the Accord? If we know that trim is worth at least 6%, and we don't know how to align the cars, then the confidence interval around "1% to 7%" extends far enough to overlap some negative percents.
    - Braxton1980 1y ago
      It's also due to the size of the vehicles that are popular today. SUVs and pickup trucks(used as family vehicles). However the increase has also been offset with weight savings in other places. - The use of aluminum in suspension components and body panels - Long ago the move to unibody over body on frame for small cars - smaller engines, V8s weigh more than an inline 4 cylinder and require heavier suspension components. For example a 1989 Lamborghini Countach 25th weighs around 3200lbs which is slightly heavier than a 2022 VW Golf GTI (3150~) I see comments that blame safety technology (electronic components) for increasing the weight of a car but a blind spot monitoring system probably weighs less than 5lbs. A rear camera is also around that. Structural safety and airbags do add to a cars weight but these changes have made cars extremely safe.
  - fidotron 1y ago
    Almost like changing the energy source causes a step change in energy optimization priorities . . .
- minkeymaniac 1y ago
  Yes.. try moving that 36 inch Sony Trinitron from the car inside the house.. weighs 200 pounds+ IIRC....you need at least 2 strong people
  - dunham 1y ago
    I remember the Sun monitors (21" I think) were about 80 lbs. I've read that part of that was a metal frame to hold all of the wires in front of the screen. They were fun monitors - we had a lab full of them, they would degauss on startup, and the degausser would induct into the monitor next to it (and a little bit into the monitor after that).
    - jeffreygoesto 1y ago
      Right. Bought two out of a University lab and lived in an apartment six stories high with only stairs. Moved out those monitors even and they were more difficult to get down than the couch... Don't let me get started about fixed frequency, X11 modeline guessing (wrong of course) and needing a second monitor to even get back to the original config.
    - mikewarot 1y ago
      The weight from a CRT is mostly about the amount of glass required to keep the atmosphere out, as it's essentially a vacuum bottle with better marketing. On that 21" display, you've got about 6000 pounds of force trying to push the face inward, not to mention the sides, neck, etc.
      - dunham 1y ago
        Yeah, these monitors were a bit heavier than most consumer 21" monitors at the time. We also got Viewsonic monitors for PCs, which were lighter. At the time, I had assumed the additional weight was from extra shielding, but I later read that some of the weight difference was a metal frame holding the wires. The trinitron had a bunch of vertical wires instead of a grid of holes on the front - If I remember right, they'd shimmer a little if you smacked the side of the monitor with your hand. It's possible they also had more glass than typical for a 21" monitor, I don't recall if they were any flatter than the Viewsonics or not.
makeitdouble 1y ago
I don't know where I fit on that spectrum, my first thought was there's probably nobody around anymore to replace these fifty year old tools, and/or they'll price it at a level that would wipe all profits for the next 10 years when replacement will be needed. Our field also have these IBM AS/400 or older running for 30+ years in a server room at the back of an office floor. They are more feared than revered.
dijit 1y ago
To be fair, a lot of the tools we use as developers have 30-40 year heritage's themselves. The things that most people depend on and are in the background.
- __loam 1y ago
  Relational databases are from the 70's
- deleted 1y ago
  [deleted]
- deleted 1y ago
  [deleted]
ACCount37 1y ago
My first thought is: "when that wears out or fails what the fuck are you replacing it with".
- rglover 1y ago
  A shockingly rare question to be asked. As best as I can tell, the biggest threat to civilization isn't AI, it's our culture of "that's not my problem" leaving otherwise patch-able holes in critical systems.
  - ACCount37 1y ago
    The biggest threat to civilization is, in fact, AI. It's a new problem, and one with an utterly ridiculous lethality at its limit. It makes the atomic bomb look benign. "That's not my problem" is something humans have been dealing with since before they mastered the art of sharpening a stick.
    - myko 1y ago
      I've seen this sentiment shared before and I just don't get it. What is the logical progression of "AI" to "more dangerous than the atomic bomb"?
      - ACCount37 1y ago
        Humans are dominating the environment by hopelessly outsmarting everything in it. Applied intelligence is extremely powerful. Humans, however, are not immune to being hopelessly outsmarted themselves. And what are we doing with AI now? We're trying to build systems that can do what human intelligence does - but cheaper, faster and more scalable. Multiple frontier labs have "AGI" - a complete system that matches or exceeds human performance in any given domain - as an explicitly stated goal. And the capabilities of the frontier systems keep advancing. If AGI actually lands, it's already going to be a disruption of everything. Already a "humankind may render itself irrelevant" kind of situation. But at the very limit - if ASI follows? Don't think "a very smart human". Think "Manhattan Project and CIA and Berkshire Hathaway, combined, raised to a level of competence you didn't think possible, and working 50 times faster than human institutions could". If an ASI wants power, it will get power. Whatever an ASI wants to happen will happen. And if humanity isn't a part of what it wants? 10 digit death toll.
bluGill 1y ago
As an older folk, I perceive 50 year old tools as likely worn out and in desperate need of replacement. However often nobody makes the tool anymore and so we are willing to spend a lot to maintain them instead. (I drive a 25 year old car - this is only possible because I can get a rebuilt transmission, but my maintenance costs over the last 10 years would have bought much newer/nicer used car, and I'm getting close to where I could buy a new car) The other possibility is the tool isn't used much and modern accountants would never allow you to buy it in the first place because of all the cash tied up. (that is the work the tool did over those 50 years wasn't enough to pay for the cost of the tool and the space to store it)
- technothrasher 1y ago
  I was recently talking to the head clockmaker at the Chelsea Clock Company, one of the very few, if not the only, remaining original New England clock companies still operating. He showed me some pictures of clock making tools being used during WWII, and then the very same tools in perfect shape still being used today. He also had one tool that dated back to when they were the Boston Clock Company (circa 1894) that was still in active use. In this new world of disposable tools, it was pretty neat to see.
hyperbovine 1y ago
> What I perceive as younger people are horrified at the idea of fifty year old tools My students are shocked (horrified?) to learn that they're basically running 50-yr old Fortran code when they use scipy.minimize to train their fancy little neural nets.
- giancarlostoro 1y ago
  I always chuckle at how Python became the dominant language for AI / ML / data science etc but wonder why it is that Fortran and Python became the golden combo, it could have been done with any other language, no complaints, I love Python, but its just amusing to me.
  - deleted 1y ago
    [deleted]
  - 7thaccount 1y ago
    It's really just that it's a pretty easy language to learn that finds a good balance between structure and brevity. It has very good support for the data structures you need and libraries for everything. A lot of people love the language and that built up a lot of momentum and eventually people started adding stuff like numpy and scipy and pandas and before long you had this giant scientific computing environment that almost anyone can get into. I tried out most of the scripting languages out there (Ruby, Perl, Tcl, Groovy, R, and many more) and Python just seemed to click more and it has a whole lot less to worry about upfront than languages like C# and Java. In comparison to languages like C and C++, it's a godsend for those with typical automation needs. In my eyes it seems like a pretty straightforward development. There have been plenty of other tools that may have made sense throughout history too. Matlab could have done this, but by that time nobody was going to build out massive libraries for something expensive and partly closed off.
    - giancarlostoro 1y ago
      Python is one of my all time favorites, it is quirky, but nowhere near as quirky as JavaScript.
giancarlostoro 1y ago
> There is a really interesting generation gap issue in the replies to your comment. What I perceive as younger people are horrified at the idea of fifty year old tools while the older folks are thinking (I imagine) “if the tools have lasted that long they must be well-honed and very good”. It's like when someone wants to choose a brand new web framework that isn't battle tested over one of the most battle tested web frameworks. You can hire way more developers with battle tested tooling, than some bleeding edge thing you don't know if it can even scale.
- mschuster91 1y ago
  > You can hire way more developers with battle tested tooling, than some bleeding edge thing you don't know if it can even scale. There's a crucial difference! You can hire expensive developers on battle tested tooling... or you can hire a shit ton of juniors that want to work on $BUZZWORD for cheap in exchange for the CV creds of "worked on $BUZZWORD". Resume Driven Development...
  - pyuser583 1y ago
    > Resume Driven Development You made me laugh
sokoloff 1y ago
This is known as the Lindy Effect. https://en.wikipedia.org/wiki/Lindy_effect https://en.wikipedia.org/wiki/Lindy_effect
yxhuvud 1y ago
I rather think of the maintenance nightmare. You can't change anything - not cause the existing system is good but because there are no people left that understand the whole thing. But then I've got a few years to reach 50. Perhaps my views will change.
- psunavy03 1y ago
  This happens in tech as well. It's called COBOL and it refuses to go away, despite lots of people's best efforts.
- loire280 1y ago
  Every software company I've worked at that is more than 5 years old had major features that nobody understood anymore, even features that were core to the product.
  - CableNinja 1y ago
    Dont forget the critical software that keeps the company going that someone dealt with long ago, and was left to rot when they left, only for someone to discover it and have to go on an archeology dig to find info and improve upon it.
- mikewarot 1y ago
  The gear cutting machines almost never had mechanical failures. As long as they keep them lubricated, and occasionally muck out the sumps, the machines should still be going in the year 2100. The other thing about gear cutting is that hobs only cut one size/profile of tooth. Some of the cutting tools I was using dated from before WW1, for odd sizes that didn't get used much.
  - yxhuvud 1y ago
    > for odd sizes that didn't get used much Well, perhaps the long term solution is to rework it and start to use more common sizes. Standardization is a good thing in the long run.
ModernMech 1y ago
Yeah I have students who ask me "Why are we learning C++? My dad said it's older than him!"
- mikewarot 1y ago
  Ask that question in language arts, and you'll get some very weird looks.
  - ModernMech 1y ago
    That's pretty much what I told the student, along with "everything you're studying in every other class is also older than your dad, and that's why you study it."
Fergusonb 1y ago
Roller coaster tycoon is good. The business software I have to work with from the 80s is a straight up nightmare. And I'd say most old software is in this camp.
- marcosdumay 1y ago
  Well, most new software is a nightmare too. And recently a lot of it started to try to do the wrong thing by design, what's an extra step into nightmare scenario beyond anything from 80s.
chii 1y ago
The thing is, those 50 yr old machine tools might be still good, but the more recent CNC machines are much more efficient, and require way less manual dexterity to use (say, compared to a lathe). This is the whole idea of industrialization - moving away from having skilled artisans, into machines that encode the skill to reproduce the article. The fact that machines that are 50 yrs old are still in operation is quite a feat but also an indication that the production methods remained static (of course, if the production machines are good enough already, then investment into new machines don't bring in new profits).
- wslh 1y ago
  I think it is not always about an age gap. A friend has a distribution company with many trucks and many times they need to use a manual machine, and soldering for fixing truck issues.
- MisterTea 1y ago
  As someone who grew up in a machine and wood working shop and now builds, repairs and retrofits machinery, I can say that 50 years old is nothing and absolutely fine. > The thing is, those 50 yr old machine tools might be still good, but the more recent CNC machines are much more efficient, and require way less manual dexterity to use (say, compared to a lathe). I assume you are referring to manual operated machinery vs CNC machinery? Otherwise there is little to no efficiency gained from a new CNC machine. I've run both and the setup of a CNC for simple jobs that can be done on a manual isn't worth the effort. CNC's really shine at high production and very complex parts. > The fact that machines that are 50 yrs old are still in operation is quite a feat but also an indication that the production methods remained static If the requirements haven't changed, e.g. machining flanges that meet ASME B16.5, and the production methods are already optimized, why even bring this up? > (of course, if the production machines are good enough already, then investment into new machines don't bring in new profits). Right. If the specs didn't change then why bother investing in pointless upgrades? The ONLY reason companies toss out machinery: it's no longer useful to the company, or so hopelessly broken that it cant be fixed. And there is very little that can render a machine scrap unless something catastrophic happened. And there is very little preventing old machinery from being retrofitted with new controls.
micro_cam 1y ago
People here also don't understand machine shops. My dad ran a job shop focused on small jobs and the economics are different. A lot of his work was keeping other local shops / industrial equipment up and running. So there is a lot of variety of work but very low throughput and kind of by deffintion you have the capabilities to fix your own machines. Programing a CNC machine makes it east to make a lot of the same part but if you only need one it may be quicker to just knock it out manually. A 50 year old mill or lathe is easy to keep up and running, can be upgraded with a Digital readout or even CNC controls if desired. A tool in a shop like this likely won't see the cycles one on a factory floor constant uses sees but may be worth keeping around since it offers a unique capability...he had a large ww ii surplus lathe for jobs that wouldn't fit on the smaller more modern machines for example.
renewiltord 1y ago
Less interested in America's expensive and slow manufacturing than in Chinese processes. They can retool faster, handle far more volume, and except for specialized industries (medicine, aerospace) their quality is better.
- _DeadFred_ 1y ago
  How old are you? Do you not understand business cycles? Life cycles? 'Baggie pants are the future, anyone wearing tired out old non-baggy pants, it's over grandpa, for we have, for the first time, discovered baggie pants are cool and modern' It's all fun and games when everything (your trains, your new bridges, your manufacturing process) is the brand new cool version. I went through that cycle (starting family, brand new house, new cars, new boat, high paying tech job working on early 2000s cutting edge tech). Our house was the cool house for a bit. Then is was just another house. Then is became a burden with maintenance expenses on top of the mortgage. I became a grey beard with legacy tech skills. For China, what happens when things settle more? The market flushes out half the companies making the tools (there's tons of companies during the 'fill out' cycle, but at some point that slows/industry consolidates), or new product lines replace the old, now your factory is on borrowed time until the machines break down, you aren't the new hyped cool kid (I'm talking about you USA as a country/Ruby on Rail devs/Angular devs). Like with a new home, slowly your mortgage gets supplemented with appliance repair bills and other maintenance, what was cool and new is outdated and replaced with 'better'. China is doing good with robots, but what happens next gen when roboto/AI interaction is native built in. Does China scrap their entire 2025 robot infra and replace it with 2030s? Or does someone else gain the advantage of not having those 'legacy' slower to retool, slower volume Chinese 2025 robots/infra? It's wild how smart people don't seem to understand basic cycles anymore. China is in a growth cycle and everyone is going to their 'new home party' and saying man this is all great (it is awesome. It is amazing how China went from poverty to current success, so many improved lives I love it) and we are acting like this is the first time someone bought a new home ever and the home will always be perfect and new and cutting edge. Let's just celebrate that so much poverty and suffering has been eliminated in China, and wish them well and continued improvements especially as they transition from the generations that suffered to their newer generations without all that trama. That is also tricky to navigate for a society as life expectations become wildly different.
badc0ffee 1y ago
I'm a nearly 50 year old tool myself.
rldjbpin 1y ago
i see both sides. while some core tech made decades ago might be tedious to adapt to today's needs, i HATE the fact that modern code is not designed to be sustainable. <rant> speaking of ai, there was a startup acquired by google in 2017, whose core features remain unchanged. however, their sdk and branding got switched around every 18 months or so. incredibly annoying how you cannot run the same code anymore despite having the libraries cached because of the cloud and its moody deprecation cycles. recently had a similar situation with azure and their (yet another) copilot rebranding had existing work being phased out by the end of the year, when the actual sdk did not get changed besides the package name! </rant> having said that i have come to appreciate things that were well-designed and lasted that long. change is not bad, but only when it is not just for the sake of it.

fidotron 1y ago

I'm somewhere in the middle, young enough that almost everything I've seen new is disposable crap (including the tools), old enough that I have had an interest in things from before and noticed that they really were built much better, or at least heavier, back then. I've made the comment on here before that I believe it's short term energy optimisation, in that it used to be seen as reasonable to much heavier objects around. We've made everything so light we've lost the infrastructure for moving heavy stuff around when we might need to. Kids today have no concept of how heavy workstations, TVs or monitors used to be, and they think it's exaggeration. Let alone tools, cars, appliances etc.

nradov 1y ago
Cars haven't gotten any lighter. Rather the reverse. Battery packs are quite heavy.
- kenhwang 1y ago
  Even non-EVs have gotten quite a bit heavier due to the inclusion of more structural safety features and creature comforts.
  - red-iron-pine 1y ago
    arguably the biggest driver is simply the cost of oil. crumple zones made of styrofoam and plastic bumpers arn't making things heavy. e.g. https://www.forbes.com/sites/samabuelsamid/2019/01/03/new-vehicles-keep-getting-heavier-or-are-they/ https://www.forbes.com/sites/samabuelsamid/2019/01/03/new-ve...
    - kenhwang 1y ago
      That article is being disingenuous and wrong. It's comparing the lightest possible Civic configuration with the heaviest possible Accord of a different body type. The 2000 Accord sedan is 2,712lbs, not 2,987lbs (which would be the wagon). The 2019 Civic sedan is 2,743–2,923lbs depending on equipment/trim. So yes, the Civic compared to an older car of similar size did get heavier. The Miata proves that cars don't have to be heavier, but the Miata also took advantage of much more aluminum compared to the older models. Maybe mainstream cars should also switch to use more aluminum to keep weight down, and you're right that the reason they don't is because oil is cheap enough where weight isn't a priority enough to use more expensive aluminum instead of steel.
      - Dylan16807 1y ago
        > That article is being disingenuous and wrong. It's comparing the lightest possible Civic configuration with the heaviest possible Accord of a different body type. Good to know. > So yes, the Civic compared to an older car of similar size did get heavier. If the minimum is 1% heavier and the maximum is 2% lighter then I would not say "did get heavier".
        kenhwang 1y ago
        You can only make the argument that the Civic is "2% lighter" when it is being compared to a wagon; apples to oranges comparison that invalidates the whole comparison. They picked that specific year Accord because it's the same size as a sedan as that specific year Civic sedan, so it makes no sense to then compare the weight to the much larger Accord wagon variant. You might as well compare the sedan to a crossover to argue that the sedan didn't get heavier. The range is 1% heavier to 7% heavier comparing the sedan to the sedan. Both ends of the range are heavier, so "did get heavier" is an accurate statement.
        Dylan16807 1y ago
        Okay I misread you then, but you're saying the 2000 Accord sedan only has one weight, while the Civic has a several percent range? If that's right then do we know which Civic trim is equivalent to the Accord? If we know that trim is worth at least 6%, and we don't know how to align the cars, then the confidence interval around "1% to 7%" extends far enough to overlap some negative percents.
  - Braxton1980 1y ago
    It's also due to the size of the vehicles that are popular today. SUVs and pickup trucks(used as family vehicles). However the increase has also been offset with weight savings in other places. - The use of aluminum in suspension components and body panels - Long ago the move to unibody over body on frame for small cars - smaller engines, V8s weigh more than an inline 4 cylinder and require heavier suspension components. For example a 1989 Lamborghini Countach 25th weighs around 3200lbs which is slightly heavier than a 2022 VW Golf GTI (3150~) I see comments that blame safety technology (electronic components) for increasing the weight of a car but a blind spot monitoring system probably weighs less than 5lbs. A rear camera is also around that. Structural safety and airbags do add to a cars weight but these changes have made cars extremely safe.
- fidotron 1y ago
  Almost like changing the energy source causes a step change in energy optimization priorities . . .
minkeymaniac 1y ago
Yes.. try moving that 36 inch Sony Trinitron from the car inside the house.. weighs 200 pounds+ IIRC....you need at least 2 strong people
- dunham 1y ago
  I remember the Sun monitors (21" I think) were about 80 lbs. I've read that part of that was a metal frame to hold all of the wires in front of the screen. They were fun monitors - we had a lab full of them, they would degauss on startup, and the degausser would induct into the monitor next to it (and a little bit into the monitor after that).
  - jeffreygoesto 1y ago
    Right. Bought two out of a University lab and lived in an apartment six stories high with only stairs. Moved out those monitors even and they were more difficult to get down than the couch... Don't let me get started about fixed frequency, X11 modeline guessing (wrong of course) and needing a second monitor to even get back to the original config.
  - mikewarot 1y ago
    The weight from a CRT is mostly about the amount of glass required to keep the atmosphere out, as it's essentially a vacuum bottle with better marketing. On that 21" display, you've got about 6000 pounds of force trying to push the face inward, not to mention the sides, neck, etc.
    - dunham 1y ago
      Yeah, these monitors were a bit heavier than most consumer 21" monitors at the time. We also got Viewsonic monitors for PCs, which were lighter. At the time, I had assumed the additional weight was from extra shielding, but I later read that some of the weight difference was a metal frame holding the wires. The trinitron had a bunch of vertical wires instead of a grid of holes on the front - If I remember right, they'd shimmer a little if you smacked the side of the monitor with your hand. It's possible they also had more glass than typical for a 21" monitor, I don't recall if they were any flatter than the Viewsonics or not.

makeitdouble 1y ago

I don't know where I fit on that spectrum, my first thought was there's probably nobody around anymore to replace these fifty year old tools, and/or they'll price it at a level that would wipe all profits for the next 10 years when replacement will be needed. Our field also have these IBM AS/400 or older running for 30+ years in a server room at the back of an office floor. They are more feared than revered.

dijit 1y ago

To be fair, a lot of the tools we use as developers have 30-40 year heritage's themselves. The things that most people depend on and are in the background.

__loam 1y ago
Relational databases are from the 70's
deleted 1y ago
[deleted]
deleted 1y ago
[deleted]

ACCount37 1y ago

My first thought is: "when that wears out or fails what the fuck are you replacing it with".

rglover 1y ago
A shockingly rare question to be asked. As best as I can tell, the biggest threat to civilization isn't AI, it's our culture of "that's not my problem" leaving otherwise patch-able holes in critical systems.
- ACCount37 1y ago
  The biggest threat to civilization is, in fact, AI. It's a new problem, and one with an utterly ridiculous lethality at its limit. It makes the atomic bomb look benign. "That's not my problem" is something humans have been dealing with since before they mastered the art of sharpening a stick.
  - myko 1y ago
    I've seen this sentiment shared before and I just don't get it. What is the logical progression of "AI" to "more dangerous than the atomic bomb"?
    - ACCount37 1y ago
      Humans are dominating the environment by hopelessly outsmarting everything in it. Applied intelligence is extremely powerful. Humans, however, are not immune to being hopelessly outsmarted themselves. And what are we doing with AI now? We're trying to build systems that can do what human intelligence does - but cheaper, faster and more scalable. Multiple frontier labs have "AGI" - a complete system that matches or exceeds human performance in any given domain - as an explicitly stated goal. And the capabilities of the frontier systems keep advancing. If AGI actually lands, it's already going to be a disruption of everything. Already a "humankind may render itself irrelevant" kind of situation. But at the very limit - if ASI follows? Don't think "a very smart human". Think "Manhattan Project and CIA and Berkshire Hathaway, combined, raised to a level of competence you didn't think possible, and working 50 times faster than human institutions could". If an ASI wants power, it will get power. Whatever an ASI wants to happen will happen. And if humanity isn't a part of what it wants? 10 digit death toll.

bluGill 1y ago

As an older folk, I perceive 50 year old tools as likely worn out and in desperate need of replacement. However often nobody makes the tool anymore and so we are willing to spend a lot to maintain them instead. (I drive a 25 year old car - this is only possible because I can get a rebuilt transmission, but my maintenance costs over the last 10 years would have bought much newer/nicer used car, and I'm getting close to where I could buy a new car) The other possibility is the tool isn't used much and modern accountants would never allow you to buy it in the first place because of all the cash tied up. (that is the work the tool did over those 50 years wasn't enough to pay for the cost of the tool and the space to store it)

technothrasher 1y ago
I was recently talking to the head clockmaker at the Chelsea Clock Company, one of the very few, if not the only, remaining original New England clock companies still operating. He showed me some pictures of clock making tools being used during WWII, and then the very same tools in perfect shape still being used today. He also had one tool that dated back to when they were the Boston Clock Company (circa 1894) that was still in active use. In this new world of disposable tools, it was pretty neat to see.

hyperbovine 1y ago

> What I perceive as younger people are horrified at the idea of fifty year old tools My students are shocked (horrified?) to learn that they're basically running 50-yr old Fortran code when they use scipy.minimize to train their fancy little neural nets.

giancarlostoro 1y ago
I always chuckle at how Python became the dominant language for AI / ML / data science etc but wonder why it is that Fortran and Python became the golden combo, it could have been done with any other language, no complaints, I love Python, but its just amusing to me.
- deleted 1y ago
  [deleted]
- 7thaccount 1y ago
  It's really just that it's a pretty easy language to learn that finds a good balance between structure and brevity. It has very good support for the data structures you need and libraries for everything. A lot of people love the language and that built up a lot of momentum and eventually people started adding stuff like numpy and scipy and pandas and before long you had this giant scientific computing environment that almost anyone can get into. I tried out most of the scripting languages out there (Ruby, Perl, Tcl, Groovy, R, and many more) and Python just seemed to click more and it has a whole lot less to worry about upfront than languages like C# and Java. In comparison to languages like C and C++, it's a godsend for those with typical automation needs. In my eyes it seems like a pretty straightforward development. There have been plenty of other tools that may have made sense throughout history too. Matlab could have done this, but by that time nobody was going to build out massive libraries for something expensive and partly closed off.
  - giancarlostoro 1y ago
    Python is one of my all time favorites, it is quirky, but nowhere near as quirky as JavaScript.

giancarlostoro 1y ago

> There is a really interesting generation gap issue in the replies to your comment. What I perceive as younger people are horrified at the idea of fifty year old tools while the older folks are thinking (I imagine) “if the tools have lasted that long they must be well-honed and very good”. It's like when someone wants to choose a brand new web framework that isn't battle tested over one of the most battle tested web frameworks. You can hire way more developers with battle tested tooling, than some bleeding edge thing you don't know if it can even scale.

mschuster91 1y ago
> You can hire way more developers with battle tested tooling, than some bleeding edge thing you don't know if it can even scale. There's a crucial difference! You can hire expensive developers on battle tested tooling... or you can hire a shit ton of juniors that want to work on $BUZZWORD for cheap in exchange for the CV creds of "worked on $BUZZWORD". Resume Driven Development...
- pyuser583 1y ago
  > Resume Driven Development You made me laugh

sokoloff 1y ago

This is known as the Lindy Effect. https://en.wikipedia.org/wiki/Lindy_effect https://en.wikipedia.org/wiki/Lindy_effect

yxhuvud 1y ago

I rather think of the maintenance nightmare. You can't change anything - not cause the existing system is good but because there are no people left that understand the whole thing. But then I've got a few years to reach 50. Perhaps my views will change.

psunavy03 1y ago
This happens in tech as well. It's called COBOL and it refuses to go away, despite lots of people's best efforts.
loire280 1y ago
Every software company I've worked at that is more than 5 years old had major features that nobody understood anymore, even features that were core to the product.
- CableNinja 1y ago
  Dont forget the critical software that keeps the company going that someone dealt with long ago, and was left to rot when they left, only for someone to discover it and have to go on an archeology dig to find info and improve upon it.
mikewarot 1y ago
The gear cutting machines almost never had mechanical failures. As long as they keep them lubricated, and occasionally muck out the sumps, the machines should still be going in the year 2100. The other thing about gear cutting is that hobs only cut one size/profile of tooth. Some of the cutting tools I was using dated from before WW1, for odd sizes that didn't get used much.
- yxhuvud 1y ago
  > for odd sizes that didn't get used much Well, perhaps the long term solution is to rework it and start to use more common sizes. Standardization is a good thing in the long run.

ModernMech 1y ago

Yeah I have students who ask me "Why are we learning C++? My dad said it's older than him!"

mikewarot 1y ago
Ask that question in language arts, and you'll get some very weird looks.
- ModernMech 1y ago
  That's pretty much what I told the student, along with "everything you're studying in every other class is also older than your dad, and that's why you study it."

Fergusonb 1y ago

Roller coaster tycoon is good. The business software I have to work with from the 80s is a straight up nightmare. And I'd say most old software is in this camp.

marcosdumay 1y ago
Well, most new software is a nightmare too. And recently a lot of it started to try to do the wrong thing by design, what's an extra step into nightmare scenario beyond anything from 80s.

chii 1y ago

The thing is, those 50 yr old machine tools might be still good, but the more recent CNC machines are much more efficient, and require way less manual dexterity to use (say, compared to a lathe). This is the whole idea of industrialization - moving away from having skilled artisans, into machines that encode the skill to reproduce the article. The fact that machines that are 50 yrs old are still in operation is quite a feat but also an indication that the production methods remained static (of course, if the production machines are good enough already, then investment into new machines don't bring in new profits).

wslh 1y ago
I think it is not always about an age gap. A friend has a distribution company with many trucks and many times they need to use a manual machine, and soldering for fixing truck issues.
MisterTea 1y ago
As someone who grew up in a machine and wood working shop and now builds, repairs and retrofits machinery, I can say that 50 years old is nothing and absolutely fine. > The thing is, those 50 yr old machine tools might be still good, but the more recent CNC machines are much more efficient, and require way less manual dexterity to use (say, compared to a lathe). I assume you are referring to manual operated machinery vs CNC machinery? Otherwise there is little to no efficiency gained from a new CNC machine. I've run both and the setup of a CNC for simple jobs that can be done on a manual isn't worth the effort. CNC's really shine at high production and very complex parts. > The fact that machines that are 50 yrs old are still in operation is quite a feat but also an indication that the production methods remained static If the requirements haven't changed, e.g. machining flanges that meet ASME B16.5, and the production methods are already optimized, why even bring this up? > (of course, if the production machines are good enough already, then investment into new machines don't bring in new profits). Right. If the specs didn't change then why bother investing in pointless upgrades? The ONLY reason companies toss out machinery: it's no longer useful to the company, or so hopelessly broken that it cant be fixed. And there is very little that can render a machine scrap unless something catastrophic happened. And there is very little preventing old machinery from being retrofitted with new controls.

micro_cam 1y ago

People here also don't understand machine shops. My dad ran a job shop focused on small jobs and the economics are different. A lot of his work was keeping other local shops / industrial equipment up and running. So there is a lot of variety of work but very low throughput and kind of by deffintion you have the capabilities to fix your own machines. Programing a CNC machine makes it east to make a lot of the same part but if you only need one it may be quicker to just knock it out manually. A 50 year old mill or lathe is easy to keep up and running, can be upgraded with a Digital readout or even CNC controls if desired. A tool in a shop like this likely won't see the cycles one on a factory floor constant uses sees but may be worth keeping around since it offers a unique capability...he had a large ww ii surplus lathe for jobs that wouldn't fit on the smaller more modern machines for example.

renewiltord 1y ago

Less interested in America's expensive and slow manufacturing than in Chinese processes. They can retool faster, handle far more volume, and except for specialized industries (medicine, aerospace) their quality is better.

_DeadFred_ 1y ago
How old are you? Do you not understand business cycles? Life cycles? 'Baggie pants are the future, anyone wearing tired out old non-baggy pants, it's over grandpa, for we have, for the first time, discovered baggie pants are cool and modern' It's all fun and games when everything (your trains, your new bridges, your manufacturing process) is the brand new cool version. I went through that cycle (starting family, brand new house, new cars, new boat, high paying tech job working on early 2000s cutting edge tech). Our house was the cool house for a bit. Then is was just another house. Then is became a burden with maintenance expenses on top of the mortgage. I became a grey beard with legacy tech skills. For China, what happens when things settle more? The market flushes out half the companies making the tools (there's tons of companies during the 'fill out' cycle, but at some point that slows/industry consolidates), or new product lines replace the old, now your factory is on borrowed time until the machines break down, you aren't the new hyped cool kid (I'm talking about you USA as a country/Ruby on Rail devs/Angular devs). Like with a new home, slowly your mortgage gets supplemented with appliance repair bills and other maintenance, what was cool and new is outdated and replaced with 'better'. China is doing good with robots, but what happens next gen when roboto/AI interaction is native built in. Does China scrap their entire 2025 robot infra and replace it with 2030s? Or does someone else gain the advantage of not having those 'legacy' slower to retool, slower volume Chinese 2025 robots/infra? It's wild how smart people don't seem to understand basic cycles anymore. China is in a growth cycle and everyone is going to their 'new home party' and saying man this is all great (it is awesome. It is amazing how China went from poverty to current success, so many improved lives I love it) and we are acting like this is the first time someone bought a new home ever and the home will always be perfect and new and cutting edge. Let's just celebrate that so much poverty and suffering has been eliminated in China, and wish them well and continued improvements especially as they transition from the generations that suffered to their newer generations without all that trama. That is also tricky to navigate for a society as life expectations become wildly different.

badc0ffee 1y ago

I'm a nearly 50 year old tool myself.

rldjbpin 1y ago

i see both sides. while some core tech made decades ago might be tedious to adapt to today's needs, i HATE the fact that modern code is not designed to be sustainable. <rant> speaking of ai, there was a startup acquired by google in 2017, whose core features remain unchanged. however, their sdk and branding got switched around every 18 months or so. incredibly annoying how you cannot run the same code anymore despite having the libraries cached because of the cloud and its moody deprecation cycles. recently had a similar situation with azure and their (yet another) copilot rebranding had existing work being phased out by the end of the year, when the actual sdk did not get changed besides the package name! </rant> having said that i have come to appreciate things that were well-designed and lasted that long. change is not bad, but only when it is not just for the sake of it.