9 ms·
In-ears headphones fit matters a lot
- ta1234567890 5y agoA bit tangential, does anyone here have any thoughts/comments/reviews about the Nura[0] headphones? From what I understand, they put a microphone next to the speaker to measure your ear’s response to sound. Based on that, a companion software builds a personalized sound profile, which then allows the headphones to auto-equalize the sound to the specifics of your ears. Do they make a big difference? Are they worth it? How do they compare to other headphones? 0: https://www.nuraphone.com/ https://www.nuraphone.com/
- radicaldreamer 5y agoApple’s AirPods Pro and Max do the same thing, but they don’t have any settings you can tinker with. They’re for measuring fit and seal.
- giuliomagnifico 5y agoI haven’t tried the Nura but I’m a bit skeptical because a microphone is another digital “thing” that can be good or bad in measure the sound, and I don’t think the quality of a micro microphone is superb. So I prefer to rely on my ears but surely for “not trained” ear is not a bad thing to understand how really a (headphone) tip works compared to the bigger or smaller.
- vijucat 5y agoI feel nauseated when I use in-ear earphones that reach deep inside. This entire article is not relevant to me. The earphones that I can bear are these : https://www.amazon.com/gp/product/B00Y4S55RC/ https://www.amazon.com/gp/product/B00Y4S55RC/. The design reaches inside a little bit, but not too much, and they sound quite decent. I suppose the AirPods (but not the Pro) are similar in design.
- monsieurbanana 5y agoHave you tried bose earphones? They are the most comfortable I've tried so far. Admittedly, I haven't tried many. They look similar to the ones you linked, they stay very well in my ears thanks to the hook thingy. https://www.amazon.com/Bose-QuietComfort-Acoustic-Cancelling-Headphones/dp/B00X9KV0HU https://www.amazon.com/Bose-QuietComfort-Acoustic-Cancelling...
- rapsey 5y agoI have bose sound sport. They work and sound great, but the build quality is atrocious. Every glued on rubber bit came off.
- jimmaswell 5y agoIsn't Bose famously overpriced and poor quality? That's what I always hear from audio circles.
- tedunangst 5y agoWell, of course, the muggles know about Bose, you can't be better than them wearing the same headphones.
- jimmaswell 5y agoThere are a lot of things where I do think the "snobs" are full of hot air, like percolated coffee being bad and "burned" or vertical photos/videos being automatically wrong, but it's been night and day listening on some higher quality headphones compared to the bose or any of the other brands I used to have.
- jcims 5y agoThat’s the wrong crowd to listen to TBH. Bose products are far from perfect and are expensive, but I’ve also found them to be extremely comfortable and have certainly adequate sound quality for every day use. Im no audiophile but i mixed live music for ten years and do pay attention to details. For example, I just compared Bose’s qc 35 ear buds to Sony’s new wf1000xm4 budd. The latter gets a lot of rave reviews, but i found them to be terrible. The high center of gravity with no support causes them to bounce loudly if you move around with them in, and the noise cancellation is constantly ringing with artifacts regardless of ambient sound level. The Bose have a pretty disappointing battery life, but beyond that are rocksolid compared to the Sonys. If you want to really lose faith in those circles, try some Beats by Dr. Dre. They clown them but IMHO the Solo 3 was an excellent product for ~$100. Good sound, fantastic battery life and Bluetooth range.
- rectang 5y agoThe main thing I can't stand about many sealed in-ear headphones is that lightly jostling the wire causes a massive bass thump in my ear. Regardless of fit, effectively this means I can't move at all while listening to them. The effect is so loud that I marvel that anybody can ignore it.
- bluedino 5y agoThey sell them without wires
- rectang 5y agoYes, of course. I'm still amazed on some level that the wired versions are considered acceptable, because the thumping is so prominent — as far as I'm concerned, it's a fatally flawed design. But that's the human perceptual mechanism for you — highly optimized for filtering out unwanted sensory input.
- formerly_proven 5y agoI have a bunch of cheap in-ears (each comes with a bag of different seals) and none of them have the issue you describe. Sure, you can hear it when the cables bump against something, but it's not a "massive bass thump".
- rectang 5y agoStick your forefinger in your ear, well enough to form a bit of a seal. Then move your finger around a little bit. That causes a ton of rumbling/thumping noise as the air in the ear canal moves much more dramatically than it does when encountering sound waves in open air. The same effect happens when you jostle a sealed in-ear monitor. I don't doubt that you are not perceiving this rumble, but my explanation is that your brain is filtering it out. EDIT: It occurs to me now that if you listen at consistently high volume (which many in-ear headphone users do), jostling rumble will be relatively lower.
- bitzlab 5y agoIt is very important to have a good fit in-ears headphones, especially if you use to do gym trainings. Myself, I own a pair of Sound Core Liberty Air-2 and they fit very nice in to my ears. Those replaceable foam bits make the difference. I admit the fact that in my opinion, they are too expensive for the quality they offer, but .. This is it now.. They are my daily music gadget. https://natrmd.com https://natrmd.com
- ziml77 5y agoI've been using Comply foam tips on in-ears for years. Most recently got some for my Air Pods Pro. They give a good seal, and they help keep the earbuds from slipping out. The downsides are that they aren't quite as easy to pop in (since you need to squish the foam and then let it expand inside), they can be irritating over long periods of time, and you will need to replace them every few months. Despite those issues, I still find the foam tips far better than any silicone tip I've tried. Those never feel like they fit right, either being too small or feeling like they're so big that they're trying to pop themselves back out.
- floydnoel 5y agoThank you for sharing! I’ve been disappointed with my Pro AirPods since I got them at launch. I’m not sure why it didn’t occur to me to look for third party replacements to improve the fit, but I’ll give these a try- thanks again!
- aalam 5y agoI switched to Comply foam, then back to silicon for good. The dealbreaker for me was cleanliness. The downside you mentioned of squishing the foam was the biggest reason; I always aimed to sanitize my hands before rolling the foam (pre-Covid, to prevent colds), so it was an extra hassle to take them out often. Also, it's easy to clean silicon tips with dish soap and water (alternatively isopropyl), but I found that Comply tips break down really easily with washing. They're also expensive to replace frequently, and I found that cheaper foam alternatives didn't measure up. If regular cleaning isn't a concern (isn't strictly necessary, it's just a personal preference), Comply tips work, though I would only use them for IEMs that don't fit well for silicon.
- costcofries 5y agoThat website is tuned for SEO maximalism, every article, every title, all the keywords and even the affiliate links. Good example for anyone looking to build a good inbound content strategy.
- giuliomagnifico 5y agoYes I noticed it too. But the article/graphs are interesting.
- ghaff 5y agoYes. Content marketing can optimize for SEO and engagement more broadly while simultaneously having good content and not being obnoxious about it.
- wintermutestwin 5y agoI have Air Pods Pro and I bought an aftermarket silicone ear tip that was slightly smaller than Apple's small. The damn things still fall out, albeit after a longer time. They are always uncomfortable and I am constantly having to shove them in. I tried foam and they didn't fit either. I must have freakishly small ear canals. I wish I could find something that works for me. The article linked in the original article (https://www.soundguys.com/finding-ear-tips-17148/ https://www.soundguys.com/finding-ear-tips-17148/) didn't talk about this problem.
- jimmaswell 5y agoHave you considered making the jump to over-ear?
- charles_f 5y agoThis feels very familiar. I have tried many pods, foams, silicon bits, and sizes. Whatever I do, those damn things fall out of my left ear. The right is fine, the left won't keep anything in it. So I'm using over-ear because that's my only viable option
- wintermutestwin 5y agoYes - I have the same issue where one ear canal is smaller. When you say "over-ear" I assume you mean traditional over ear headphones with a strap. And yes, I have a decent pair, but they are big and not good for a number of common situations: 1. Lifting weights at the gym - when I lie down on a bench they fall off. 2. When I am out jogging, they bounce around too much and get very sweaty in hot weather. 3. In cold or sunny weather, I can't wear a hat with them.
- LeoPanthera 5y agoI actually returned my Airpods Pro because I simply could not get them to fit. iOS even tells you if they don't have a good seal and I could never make it happy.
- ghostly_s 5y agoI've just, I hope, arrived at the end-point of a similarly frustrating adventure into wireless earbuds that don't fit in my ears. I tried the Airpod Pros first, and like you the only way I got them to stay in for longer than a full minute was by jamming them in so hard it was painful to wear. After trying several alternatives with similarly unworkable results, I just recently picked up the Anker Soundcore Life A2 NC and finally have wireless earbuds that are usable. The feature set is somewhat lacking vs. the Airpods Pro but is good enough for me. The sound quality is also a bit disappointing but still better than the frankly awful Airpods. I think there may be other options out there worth looking at for us small-eared folk with similar designs -- the key is rather than a big 'bulb' right behind the tip for the drivers and electronics, the bulky bit is set a ways out from the tip and is suspended without touching your ear in use, allowing you much more freedom in getting the angle and depth of the part in your ear canal just right. Instead of attempting to nestle that big bulb in your external ear cavity like the airpods do, it has a little stabilizer wing that is flexible and comes in 2 sizes, and they come with five sizes of silicone tips. I've been wearing them basically all day for the past week with almost no discomfort.
- Rd6n6 5y agoOne of the major problems is that you can’t really try in ear headphones before you buy them. This makes it impossible to try a wide range of them for fit, sound quality, comfort, cable noise, etc. There is a company or two with a few with disposable ear tips in store for you to try, but that limits your options pretty dramatically since it’s so rare
- bryan0 5y agoI think any decent IEM uses replaceable / custom tips. Many come with an assortment to try out and there are many more you can order online. For example the Comply foam tips are very popular.
- noneeeed 5y agoYeah, I use a pair of Shure IEMs, they came with at least half a dozen different sets of tips, in different sizes and types.
- amelius 5y ago> One of the major problems is that you can’t really try in ear headphones before you buy them. Your right as a consumer is that you can return items within a certain period after purchase. Make use of it! Beware: buying as a company often does not give you this right.
- yosito 5y agoI primarily use in-ear headphones for running. I find that headphones with a good seal mean that I can hear every step I take thumping in my ears, and after running I can hear my heartbeat. Both are extremely uncomfortable sensations. Apple AirPods, despite not fitting with a seal, work perfectly. They don't fall out, and I can't hear my own body. Can't really ask for more, except a black option and better software support on Android.
- willis936 5y agoI'm glad to see attention drawn here. The only way to get any reasonable sub 500 Hz response out of tiny in-ear transducers is to have a good seal. The standing waves go a long way. Molded in-ear monitors are best, but they're speciality items. It would be cool to see a modern true wireless earbud you can order and ship them your ear molds.
- senorsmile 5y agoI have sensaphonics custom sleeves for Shure universals (specifically the se-535's, but fit the 215's just fine). I've used them with Shure bluetooth wireless adapters for a few years. Now with Shure's new Aonic TWS adapter, I can pop them on my 535's with my custom sleeves and voila!
- willis936 5y agoThat Aonic TWS is pretty interesring! It's almost exactly what I'm looking for. It'd be nice to also have the mic used for calls also be able to pump in sound from the outside. I like IEMs, but I don't want to wear something at work that I have to pull out all of the time.
- disabled 5y agoThere is actually a subreddit called DIY in ear monitors. https://www.reddit.com/r/DIEMs/ https://www.reddit.com/r/DIEMs/ You will be quite impressed and I suggest you take notes and dump great posts into OneNote or something similar to index, so when you make your own, you have a great reference and cheat sheet.
- willis936 5y agoI actually have already gone pretty deep. A few years ago I got a teensy, molded shells, specced out a nice set of 3 transducers, modeled passive and DSP crossover networks (tradeoffs of low latency IIR mode and high quality FIR mode on the DSP side), and a measurement apparatus. I got to the point in the project where I had to manually solder tiny wires onto tiny surface mount connectors and put the project down. Idk if I'll ever be able to finish it, but it was a fun project. Edit: Oh I forgot to add that I also got tiny microphones and lodged them into the IEM blackplates for ANC or pass-through. It's an ambitious hobby project. I'd be happy to see a proper company do it (or at least incorporate elements of it).
- GuB-42 5y agoCertainly, and I wonder why custom fit earphones are not more popular. They are a bit expensive but many people don't mind paying more than $200 on headphones and that's about how much entry level custom molded earphones cost. I didn't try them but I have custom molded earplugs, and there is no comparison to anything else I have tried. They are comfortable and they stay in place. They are the kind that musicians use and they are optimized for low distortion, but you can use a different filter, because they seal so well, you really get the sound you want, and not whatever is allowed to leak.
- jimkleiber 5y agoI've been looking for something like this, would you mind sharing the name of the product you've been using?
- disabled 5y agoThere is a subreddit for DIY in ear monitors. Pay close attention to the first post on this page in particular: https://www.reddit.com/r/DIEMs/comments/kfdwf5/made_my_first_3d_printed_shells_with_an_iphone_11/ https://www.reddit.com/r/DIEMs/comments/kfdwf5/made_my_first... However, you do not need a 3D printer at all to make wonderful in ear monitors. Also, I prefer clear shells (as a color for the headphones) by far. It is also not difficult to make proper ear impressions, too. See this for example: http://static.speedwaymotors.com/pdf/910150509.pdf http://static.speedwaymotors.com/pdf/910150509.pdf However, this was my basic search technique to find this document about making your own ear impressions: "impressions" AND "ear" AND "bite block" AND "make" filetype:pdf I made a post that is lower down on this thread that gives the 411 on everything you need to know including using them with a phone that does not have a 3.5 mm jack. This includes for microphone use, like making phone calls.
- jimkleiber 5y agoAhh thank you so much!
- disabled 5y agoInstead of shelling out a ton of money ($1,000+) for custom molded in ear monitor headphones, check out the subReddit DIY In Ear Monitors: https://www.reddit.com/r/DIEMs/ https://www.reddit.com/r/DIEMs/ By the way, you can even 3D print your in ear monitors, but this is absolutely not necessary, and especially so if you are cheap. Getting ear impressions from an audiologist generally costs $50-100 but I prefer to do it myself. It is also not difficult to make proper ear impressions, too. See this for example: http://static.speedwaymotors.com/pdf/910150509.pdf http://static.speedwaymotors.com/pdf/910150509.pdf However, this was my basic search technique to find this document about making your own ear impressions: "impressions" AND "ear" AND "bite block" AND "make" filetype:pdf (I hope this allows you to do more research) There is a great guide on making basically perfect DIY in ear monitors, pay attention to the first comment (however it involves 3D printing...also I much prefer clear shells for the in ear monitors...) on this Reddit page: https://www.reddit.com/r/DIEMs/comments/kfdwf5/made_my_first_3d_printed_shells_with_an_iphone_11/ https://www.reddit.com/r/DIEMs/comments/kfdwf5/made_my_first... Anyways, one should really take a look. When it comes to audio quality and listening on a Bluetooth phone without a 3.5 mm jack, you use a DAC (digital to analog converter) which allows you to enjoy the music on a totally new level. I would recommend this one: https://www.amazon.com/FiiO-Balanced-Amplifier-Windows-Portable/dp/B08LW466SB/ref=mp_s_a_1_12?dchild=1&keywords=fiio+bluetooth+dac&qid=1633280542&sr=8-12 https://www.amazon.com/FiiO-Balanced-Amplifier-Windows-Porta... There are also Bluetooth DACs that may be preferable too. I recommend the FiiO brand. Here is an example of a Bluetooth DAC: https://www.amazon.com/FiiO-BTR3K-Bluetooth-Headphone-Unbalanced/dp/B085XT3V3X/ref=mp_s_a_1_1?dchild=1&keywords=fiio+bluetooth+dac&qid=1633280542&sr=8-1 https://www.amazon.com/FiiO-BTR3K-Bluetooth-Headphone-Unbala... If you enjoy music a ton just in general and love wired headphones, I strongly recommend getting a DAC that is compatible with mobile phones even if you are not interested in DIY in ear monitors... When it comes to making phone calls (or even microphone use) with DIY in ear monitors, you need to be observant of the type of 3.5 mm plug that you use. ONLY plugs with 3 indentation lines (NOT 2!!!) are capable of microphone use. Anyways, here is an example of what I am talking about so we are clear on this issue: https://duckduckgo.com/?q=3.5.+mm+plug+microphone&t=fpas&iax=images&ia=images&iai=https%3A%2F%2Fae01.alicdn.com%2Fkf%2FHe10fe47a43c4489791cd0a210d1b68c4H%2F20-cm-M-M-USB-3-5-mm-microphone-jack-Audio-plug-power-cable-data.jpg https://duckduckgo.com/?q=3.5.+mm+plug+microphone&t=fpas&iax... When it comes to using your in ear monitors for phone calls or microphone use you need to: 1. Get a Bluetooth transceiver that is mic capable, such as this: https://www.amazon.com/Bluetooth-RollingStone-Headphones-Streaming-Hands-Free/dp/B0816QMXVD/ref=mp_s_a_1_18?dchild=1&keywords=bluetooth+mic+3.5mm&qid=1633284736&sr=8-18 https://www.amazon.com/Bluetooth-RollingStone-Headphones-Str... 2. Get an in-line microphone which plugs in directly to your DAC and gives it instant microphone capabilities * Android version: https://www.amazon.com/Bose-QuietComfort-Headphones-Samsung-Android/dp/B00XLIFRZQ/ref=mp_s_a_1_3?dchild=1&keywords=inline+mic+bose&qid=1633281569&sr=8-3 https://www.amazon.com/Bose-QuietComfort-Headphones-Samsung-... * iPhone version: https://www.amazon.com/Bose-Comfort-Headphones-Inline-devices/dp/B00OGA2R7Y/ref=mp_s_a_1_4?dchild=1&keywords=inline+mic+bose&qid=1633281569&sr=8-4 https://www.amazon.com/Bose-Comfort-Headphones-Inline-device... I hope this post helps.
- zh3 5y agoRather agree with the article, having done a lot of trial and error on earbuds - fit really does matter. Good fit actually seems more important to the sound than the underlying speaker tech, also determines how long they stay comfortable for. Having run through a lot of earbuds, for me personally I've found the Panasonic RP-HJE-125's best (despite the throwaway price). Probably a bit rough on things, I do break stuff a lot and there's really quite little to be had between well-fitting cheap buds and much more expensive offerings (the HJE's come with 3 sizes of tips, don't be afraid to use different sizes each side). Edit: For more bass try JVC HA-FX10's - too much more bass for me, horses for course etc.
- awinter-py 5y agoyes. personalization has taken over information products and is coming for real world objects. there are physical goods where custom size or features are so important that they in essence make it a new product category.
- 14 5y agoI have a small ear canal on one side I wish there was a product that could cater to my one ear is different in size issue. I haven’t found any that fit. My ear canal is small but not abnormal or anything surely there has to be a brand that has dealt with this before?
- infogulch 5y agoI gave up on both in-ear and over-ear headphones, everything I tried would either fall out or become uncomfortable after enough time and I hated having to constantly fiddle with it. I finally broke down and dropped $160 on the "bone conduction" AfterShoks Aeropex that doesn't cover the ear canal, but pushes against and conducts sound through the bone right in front of your ear. It's been my favorite personal audio purchase ever. It's marketed towards athletes, but it works wonderfully even for pedestrian use-cases like video calls. This is the first headphones product I've ever been able to just put on and just "forget" that they're on for a whole day. I like that it doesn't block sounds in my environment, it means I can remain aware when exercising outside and I don't get snuck up on in the office, but I can understand why that would be an anti-feature for some people (or maybe use actual ear plugs for that purpose?). https://aftershokz.com/us/products/aeropex https://aftershokz.com/us/products/aeropex
- BeFlatXIII 5y agoMy pair of Aeropex came with a pair of foam earplugs in the package for this exact reason. They're not meant to be musical headphones, but they are amazing for listening to podcasts while exercising or doing chores around the house. I should have bought a pair when they first came out instead of waiting until this year to do so.
- benrbray 5y agoAgreed, I did the same! I do still get fatigued wearing them, but it takes a bit longer. I love it for city walks / cycling where it's important to be aware of my surroundings.
- EvanAnderson 5y agoI have mild tinnitus. Most of the time I don't notice it. It becomes wildly apparent when I'm wearing in-ear headphones. I've always assumed this was because outside sounds are blocked by in-ear headphones and I get to "hear" my tinnitus more effectively. I get the same effect walking down the "foam" aisle at a local fabric store where ambient sounds are dampened. (That aisle is spooky, makes my entire head feel strange, and I avoid it religiously now.) The worst part is that the awareness of my tinnitus persists for hours or even days afterward. I keep hearing it even after the earphones are removed. A few minutes of in-ear headphones and I have at least hours of awareness of my tinnitus. I like being able to listen at lower volumes with in-ear headphones but I can't stand being aware of my tinnitus. I end up listening to earbuds or over-ear headphones at higher volumes than I would for the in-ear versions. With that all said, these bone conduction earphones sound interesting. Do they allow you listen at volume levels comparable to the sealing-type in-ear headphones? I understand that in an environment with loud ambient sound increasing the volume would likely be necessary, but I'm wondering if the "bone conduction" does a better job cutting thru ambient noise. Does anybody else have a similar situation with tinnitus as I've described here? If so, how do you cope with it?
- ghoul2 5y agoSlightly tangential: can anyone recommend a good _wired_ noise cancelling headset (with mic) that is powered off the cable (or is USB). That is, it doesn't need batteries at all.
- hfourm 5y agoOne of Logitech's brands (Ultimate Ears) makes an "at home" semi-custom molding eartip for their true wireless earbuds. The "UE Fits". I bought a pair, honestly was super comfortable, they are molded via a UV light in the earbud in a one time setup process. I went with another pair of wireless earbuds for other features, but thinking back I kind of miss them already. But, would be cool if a company made a product that let you make semi-custom earbud tips like this for a variety of different earbuds -- without requiring ACTUAL ear molding and extended process of true custom IEMs. Sorta like the comply foam/spinfit aftermarket tips.