45 ms·
Gas Pump Skimmers
- jlebrech 9y agoso you could download the data without needing to install a skimmer yourself, what if someone whitehatted it by downloading the data and contacting each bank.
- S_A_P 9y agoSomething tells me that doing so would raise eyebrows and require you to explain yourself. While it would be easy to say, hey I read this article and I figured I would help out. I cant help but thinking the bank would still press charges because you are in possession of stolen credit card information. Additionally, while you can tell what kind of card it is from the CC#(3-AMEX/Diners club,4-Visa, 5-Mastercard, 6-Discover, etc) you cant always tell what the issuing bank is. Is it a capital one visa? is it a chase visa? do you want to do all that legwork, white hat or not?
- sitkack 9y agoThis sucks, I have been war-driving these skimmers for months. Thanks spark-no-fun.
- jimjimjim 9y agoin more civilized parts of the world: cc companies (and country acquirers) have a thick book of rules and complex/expensive certifications. if you don't follow the rules either the device doesn't get to connect or any loss due to fraud is applied on the site owner. also: emv + single unit sealed/tamper resistant payment component (the reader, screen and pinpad are one) also: pumps are remotely monitored for case opening and video surveillance (at the very least to counter staff theft). this isn't a problem in some countries.
- jaredandrews 9y agoVery interesting, just installed the app they created. Going to be driving all over the northeast for the next few months. I wonder if I will find any skimmers...
- excalibur 9y agoThis should be fun for a while, but don't expect it to last. If the persons producing these haven't seen this article yet, they will soon. Surely next batch will use a different ID and password, but additionally they could set the HC-05/1234 combo to do something nefarious when attempted. (Probably just put the skimmer to sleep for a while, so it won't be detected. The things they could potentially program it to do will be somewhat limited by the cost of additional components.)
- moftz 9y agoThe people installing these skimmers aren't the ones writing firmware for them. They have been mass produced in China and sold around the world. There might be a v2 in the works that works better or is more difficult to detect but people will still be buying the original version because it does the job and works well enough to get at least some cards before being found. It is similar to the OBDII reader chip, ELM327. Elm made a decent v1.0 release for their PIC-based ELM327 and forgot to lock down the firmware. Everyone then proceeded to make pirate clones of the reader. It is much easier to just keep producing the exact same chip/firmware combo than it would be to actually go back and decompile/write new code to add some stealth features that aren't going to make your new v2.0 sell any better over the cheaper than dirt v1.0.
- Scoundreller 9y agoUse the pump that's most obscure from the clerk for max risk/benefit!
- Brushfire 9y agoI'm curious if they are also logging the zip code entered via keypad. I can't remember the last time I used a pump without zip code validation.
- ams6110 9y agoFrom the write-up, it sounds like these were just grabbing the card data. Where I live most pumps do ask for zip code but a non-negligble number don't. Why haven't gas pumps converted to chip cards?
- nkozyra 9y agoI don't believe the most common skimmer has access to this, but the prevalence of required zip code with other transactions is so low it doesn't matter. Most frequently required: 1. Card no. 2. Expiration 3. CVV 4. Full name 5. Zip code (or address) But plenty of transactions will be fulfilled with just #1 and #2.
- fencepost 9y agoIn many areas the zip code associated with the cards will likely be one of only 1-3 choices, particularly if the gas station isn't on a through road.
- goialoq 9y agoThe zip code is to prevent criminals from stealing gas (via vendor fraud chargeback) via a card stolen elsewhere, not to prevent criminals from stealing cards at the gas station.
- benjaminjackman 9y agoI wonder if they use the stolen cards to steal gas from other stations, that eventually by and large gets sold back to stations from what I have read.
- tastyfreeze 9y agoThe real reason for requiring zip code entry is a lower interchange fee for the station. If they didnt get a lower interchange fee they wouldnt care at all. It is also the only identity verification information that can be entered on a 10 key pad.
- aidenn0 9y agoIt seems like one could make a bluetooth snooper that looks for people who connect to the skimmer? Then you could catch skimmer users when they download the data.
- new299 9y agoI'd guess the police don't have the resources/are not interested in this kind of crime. I also doubt it's much of an issue for the gas station itself. The card is skimmed at the gas station, but does that mean the cloned card will be used there? I mean, sparkfun are great, but they're not pentesters. The fact that the police went to them probably means they didn't have the resources to hire a pentesting firm (or do it internally). I'd also guess they don't have the resources to police these crimes either (which would mean a lot of hanging around at gas stations).
- yorwba 9y agoIt might be possible to make a small device (maybe using the same Bluetooth module as the skimmer) that listens for someone issuing the command to download the card numbers and then automatically calls the police, no need to have someone monitor it in person. I don't own a car, so I'm not that familiar with gas stations, but I assume most will have security cameras that can get you the perpetrators license plate. That ups the bar for successful skimming to also include fake car papers and will probably deter small-scale criminals.
- new299 9y agoIf they already have security cameras, then they already have everything they need to catch someone installing the device. This being the case, the criminals have likely either already figured out how to avoid the cameras (or park out of sight). Or the police are not acting on this information because it's not seen as a priority.
- sjwright 9y ago> they already have everything they need to catch someone installing the device ...except for the timestamp of the installation event. Or the resources required to brute-force through mountains of footage to find the event.
- Pfhreak 9y ago> The Skimmer Scanner is a free, open source app that detects common bluetooth based credit card skimmers predominantly found in gas pumps. The app scans for available bluetooth connections looking for a device with title HC-05. If found, the app will attempt to connect using the default password of 1234. Once connected, the letter ‘P’ will be sent. If a response of ’M' then there is a very high likelihood there is a skimmer in the bluetooth range of your phone (5 to 15 feet). Why isn't this just a part of the gas pump itself? (Or the payment station or whatever.) Is there a market for someone to make skimmer detector addons for gas stations? (If not, why not?)
- solatic 9y agoI imagine that gas pumps are much more costly to retrofit or replace. If such detection capability was built-in, it's much easier for the skimmers to adopt a different format to avoid detection by naive gas station operators who want something they can set-it-and-forget-it.
- wyldfire 9y ago> Is there a market for someone to make skimmer detector addons for gas stations? (If not, why not?) It would probably be best sold as a service instead of a device. It's not easy to train staff to operate equipment like this. Also, it's likely to engage a cat-and-mouse escalation which either means a headache-fueled field-updatable device (more complexities for gas station staff) or rapidly-obsolete devices. But the service might be a hard sell -- the service would have to be more effective than manual pump kiosk inspections. Best to try and sell to an established brand that operates the stations themselves (are there any or are they all franchisees?) 7-11 operates gas stations in urban markets likely to be targeted, they might be a good client.
- Zircom 9y agoDo gas stations have any incentive to provide skimmer scanning? I'd imagine most of their customers aren't even aware skimmers exist, so adding them probably wouldn't attract many new customers. And the margins they make selling gasoline are already pretty thin, so it's possible that the cost of adding scanners to all their machines is less than the extra money they'd make from the minority of people that would go out of their way to give their business to gas stations with scanners. If gas stations are liable for losses that customers experience due to skimmers it's possible that gas stations would be interested, but they could just as easily decide that it's worth the risk of having to pay out lawsuits given that I'd imagine it's pretty hard to prove in court that your card was stolen by a skimmer at any one particular gas station considering how many different gas stations any one person uses on a regular basis, not to mention the variety of other vectors that your card could've been compromised through.
- new299 9y agoNice writeup. But in the article they write: > Are you angry that your card has been stolen, again? Contact your local congress person or senator and ask them to pass legislation that fines gas stations $100 for every card that is discovered on a skimmer in one of their pumps. It’s ultimately up to the gas stations and pump manufacturers to secure their pumps. Suggesting a solution like it's an easy fix always bugs me a bit. Would a 100USD fine actually work here? The issue seems more with the fact that the US hasn't upgraded to a chip&pin style system. You might end up just costing the gas stations more money, when they don't actually have the power to do much about the problem. It feels a bit like victim blaming, when in this case the victim has little choice but to work with the system as they find it.
- ams6110 9y agoIt's not the gas stations that are committing the crime. Why should they be fined? It's the people breaking into the pumps and installing the skimmers. Most stations do what they can with security seals, frequent inspections, I've even seen some that install hardware-store hasps and padlocks on the pumps. I do wonder why they have not converted to chip cards though. Almost all other retailers have.
- goialoq 9y agoA gas station with a skimmer is like a gas station with a gas spill -- it's a hazard on their property that is open to the public. They have a responsibility to maintain a safe environment, or else close off the property.
- new299 9y agoI assume when a gas station operator becomes aware of either a skimmer or a gas spill they remove it. I guess in both cases what they can do to prevent those things from occurring at all is limited. Is anyone arguing that they don't monitor for skimmers on a regular basis? It's just that the criminals keep putting them back.
- yorwba 9y ago
- anonymousjunior 9y agoIn the second image here [1] there's a security seal on the payment closure as a whole; I'd imagine a simple security seal along the side of the card scanner intake would thwart most would-be card skimmers, no? At that point the employees could just make it part of the standard inspection and it'd be more obvious to customers if they were missing. [1]: https://cdn.sparkfun.com/assets/learn_tutorials/6/9/4/Gas_Pump_External.jpg https://cdn.sparkfun.com/assets/learn_tutorials/6/9/4/Gas_Pu...
- breakingcups 9y agoThe caption right under that image is: "Front of a US Fuel Pump complete with extremely difficult to source security seal" "extremely difficult to source" is a link to an ebay page with thousands of different security seals.
- Doxin 9y agoThey also link to a page on ebay in the article where you can buy those seals.
- forgueam 9y agoIt seems to me that you could just put some kind of sensor on the inside of the gas pump access door that notifies someone as soon as the door is opened. If you know there is a maintenance guy scheduled for that day/time, then you just ignore the notification. If not, then you know that there has been unauthorized access to the pump.
- chrissnell 9y agoThat requires money and ongoing effort on the part of whoever monitors that system. As the article stated, there is not a monetary incentive to the responsible party (the station owner) to make this happen. Even with an incentive, it's still an arms race with the bad guys. Things will only get better when we have more secure payments.
- reaperducer 9y agoLots of people have access to gas pumps and their keys. Not just the station owners, but the managers. Also city/county/state weights and measures regulators, the guy who maintains the attached screen that shows the local news and weather loop, and probably more that I don't even know about. From what I've seen about gas pump locks, they look about as "secure" as those round keys that came with every IBM AT-clone in the early 90's. They kept the weak and the ignorant out, but you could unlock your buddy's rig at will.
- stevenh 9y agoI was skimmed at a gas station last winter. I pay with cash now.
- Justin_K 9y agoWhy? You're not responsible for fraudulent charges and now you're out on points / cash back.
- tasty_freeze 9y agoI can give you two good reasons. One is to not reward the scammers by giving them free money. The second is that my wife and I have had to replace our credit card about six times in the past three years. Contacting all the places where we have autopayments set up gets to be annoying quickly.
- fancy_pantser 9y agoIt's still a hassle. I had my card skimmed while on vacation earlier this year. The next week I was eating at a restaurant and got a call from an unknown 800 number that I didn't answer. My card was declined at the end of the meal. I called the number back and it was the issuing bank's fraud department saying my card was used suspiciously and they've cancelled it. Because I was still on vacation it was a big hassle involving finding a place to fax a typed, signed letter to get my new card sent to an address I'd actually be at.
- kbart 9y agoI still don't get why all credit cards have magstripe when we have chip&pin for decades. Yes, I know it's required by a standard, but I see no justification for that. I have never used magstripe , but it's right there on my every card and there's no way to disable it (I've asked my bank for it), unless you deliberately destroy it (scratching or similar manner).
- nikcub 9y agoIt's a backup. I've heard from retailers that the failure rate on the chips is much higher than it is for swiping. In Australia you pay for fuel after filling up, and one fuel station owner is dealing with an average of a driver or two a day who is unable to pay for fuel. They don't carry cash, the chip/EMV is failing and they don't have the mag stripe linked to a facility since they're often debit cards. Apparently the failure rate on phone based payments is also high(er). It's one of those issues I wouldn't have considered before speaking to retailers.
- dx034 9y agoThat's why I always carry at least two cards. Cards fail, get blocked because of leaked data, bank fraud systems produce a lot of false positives etc.. The problem with a cashless society really is that you assume the tech is reliable. Unfortunately, that's often not the case.
- falsedan 9y agoThose bloody drongos should switch to pre-paid then. The unattended stations are all pre-paid…
- jordanthoms 9y agoYeah, the chips are nowhere near as reliable as the magstripe. It seems like a transitional technology only - NFC is fast and reliable.
- reaperducer 9y ago> NFC is fast and reliable I know you're speaking of NFC chips in cards, but you might know — Does the phone version (Apple Pay/Android Pay/Samsung Pay) still work when my phone's battery is dead?
- deleted 9y ago[deleted]
- watertom 9y agoChips aren't anymore secure, I can read the data off my card with a standard chip reader, and I have. The same data on the chip is on the mag strip. Just because you are using the chip doesn't mean you are doing an EMV transaction. The unique transaction codes only happen with and EMV transaction, almost every time you dip your card it's a regular old card transaction, just as if you swiped the card. Why? Getting EMV certified requires every part of the transaction chain to go through unified system testing, for each combination of hardware, software, card type, processor, issuing bank. I've been eyeballs deep in this nonsense for the last year or so. We just can't justify the expense of getting EMV certified, so we just accept the chip and do a regular transaction. As a consumer you have no way of knowing if your transaction is and EMV transaction or just a chip enabled regular transaction.
- throwaway613834 9y ago> Just because you are using the chip doesn't mean you are doing an EMV transaction. The unique transaction codes only happen with and EMV transaction, almost every time you dip your card it's a regular old card transaction, just as if you swiped the card. By the way, do you have any reference on this? Everywhere I've searched, chip seems synonymous with EMV.
- lmilcin 9y agoFor background, I was developing those types of applications few years ago, professionally. Every chip or contactless transaction is an EMV transaction. This is by virtue of EMV being the protocol that terminal uses to communicate with the card. EMV allows for different types of transactions with different level of security. For example, if the transaction can be done offline (gas pump unattended terminal situation) AND executing CVM rules (both terminal and issuer have their own rules) points to the possibilty of exchanging encrypted PIN, the PIN can be sent safely encrypted to the card for verification. If the card or the terminal does not support encrypted verification then the PIN can be sent in the clear and vulnerable to skimming.
- throwaway613834 9y ago
- userbinator 9y agoThe overwhelming "defaultness" of the whole thing makes me think these were actually intended as conversion adapters or something else that wasn't purpose-built for pump skimming. The complete lack of code protection (setting it is literally a single checkbox in the programming utility --- and almost all commercial products with an MCU will have this protection enabled), leaving the markings on the chips (I've seen more legal devices with them scrubbed off), and default password unchanged are the most noticeable. Googling "bluetooth magnetic card reader" also yields quite a few results like this one: https://www.amazon.com/Deftun-MiniDX4B-Wireless-Bluetooth-Collector/dp/B01F4X9GNY https://www.amazon.com/Deftun-MiniDX4B-Wireless-Bluetooth-Co...
- sounds 9y agoThe code on the PIC is protected. The hex dump that is presented has sections filled with zeros, as that is how PIC code protection works.
- paul7986 9y agoMakes want and just may force me to use my phone to pay for gas!!!
- alkonaut 9y agoSo if the attacker has to have a key to break into the machine and install the skimmer, isn't that the problem then? And if the attacker opened the pump to install the skimmer, why would he need to use radios at all? Why not just log it to flash for a week, then go to the pump and fetch the skimmer again? Presumably you'd want to remove the skimmer from the machine to avoid detection anyway?
- koolba 9y agoNot quite. Most skimmers are affixed atop the actual card reader. From the outside it's just a bit thicker. You don't have to open the machine at all to attach them.
- alkonaut 9y agoYes, that kind of skimmer I'm familiar with. The reason those skimmers are so easy to detect is because they need to mount on the outside which makes it unnaturally bulky, and sometimes also contain a camera to monitor the keypad. I'm not too worried about those because those are pretty easy to spot, especially those with cameras. But this internal skimmer is more like a pump "root kit" you can't see...
- pavel_lishin 9y ago> then go to the pump and fetch the skimmer again? Presumably you'd want to remove the skimmer from the machine to avoid detection anyway? They care more about getting arrested than their skimmer getting detected - and physically removing a skimmer is the second most dangerous part of the scam (the first is installing one, of course.) These things are cheap enough that it probably makes more sense from a risk/benefit analysis to just leave there forever and pick up the results over bluetooth until the skimmer disappears.
- whalesalad 9y agoThe attacker doesn't want to open the pump again. Can you imagine how much attention that draws? These devices are so cheap they are throwaway. Most crimes are that of opportunity: install the skimmer and try to get whatever you can get. If the attacker can keep revisiting the machine, posing as a customer, it's the least risky way to harvest data. If the skimmer gets found, aw shucks on to the next one.
- kozak 9y agoI recently traveled to the US, and stayed in a hotel of a major brand which had some outdated payment terminal that only used the magnetic strip of the card (without even a possibility to enter the PIN). The transaction was over a thousand USD. I had cards from two different banks: one failed because the PIN wasn't entered, and the second one got through. But after several months the second bank somehow freaked out and charged back about a third of the amount (probably flagging the transaction as fishy or something). I tried to contact the hotel to somehow return them the money that were mistakenly returned to me, but apparently there is no mechanism to do that.
- dionidium 9y ago> some outdated payment terminal that only used the magnetic strip of the card Sadly, this isn't all that "outdated" here. There are still lots of places in the U.S. that don't use the chip and basically none -- does anywhere? -- use a PIN with it. I don't even know if I have a PIN on any of my credit cards, much less what it is.
- saalweachter 9y agoYour issuer can use a PIN in the US - my credit card through my credit union uses a PIN, which confuses the hell out of most clerks. Sometimes I have to walk around the counter to reach their machine and enter the PIN, sometimes they have me sign the receipt (just at the bottom, since it doesn't print a signature line) so they feel better.
- astura 9y agoI think Barclaycard is the only major CC issuer in the US to have actual PINs on their cards but it defaults to signature. Here's what they say about it: >Your credit card is a chip and signature card with Personal Identification Number (PIN) capability. In most cases when you travel abroad, you'll be asked to sign for your transaction. However, at some unattended terminals, such as train ticket kiosks, you may be asked to enter your PIN instead of signing.
- deleted 9y ago
- electriclove 9y agoTop area mentions HC-05, later in the article it says HC-06. Which is it? Or am I missing something - granted, I did skim the article.
- tntniceman 9y agoFrom what I understand, both modules could potentially be used. HC-06 & HC-05 contain the same physical internals, but host different firmware.
- asow92 9y agoI feel like I was just put on some watch list for viewing that.
- MrZongle2 9y agoIf it makes you feel any better, you're probably already on a watch list for just knowing what a watch list is.
- anemic 9y agoMost interesting part is that they managed to get the hex dump of the software. Quick glance shows there are no copyright texts in it, bummer! I'm not an expert in PIC assembly but it seems there is very little code and there are no obvious code paths, like a switch..case like construct for processing the serial commands. Lots of I/O and not much more. Most likely they are not decoding the magstripe data in PIC but just get the decoded data and store it.
- jerryr 9y agoI just tried disassembling the hex file. Unfortunately, the code protect bits are set (location 0x300008 is 0x00). This means that the ROM from 0x000800 to 0x007FFF will read as zero. And indeed, that entire space is filled with zero. So, I think we're missing much of the actual firmware. Edit: And the reset vector begins with a branch to location 0x001ACA, which is all zeroes, so I'm pretty sure most of the firmware was not read out due to the code protection.
- Aissen 9y agoFrom a quick Google Search, a Russian company is offering microcontroller code-dumping services: https://russiansemiresearch.com/en/faq/ https://russiansemiresearch.com/en/faq/ I have no idea if this is legit or not. I doubt your law enforcement would let you access their services anyway. Edit: My guess would be they work with industrialized de-capping + software to dump the memory, like this: https://www.bunniestudios.com/blog/?page_id=40 https://www.bunniestudios.com/blog/?page_id=40 There are other "chip intelligence" companies in the US, some of which probably have such services. At a different cost.
- captaindiego 9y agoOn some of these embedded chips there are methods to glitch the fuses for read protection by messing with the power (a form of fault injection attacks). These used to work a few years back but I haven't heard if they still do.
- Shivetya 9y agoso can I just pull out my phone and look and assume any close by BT is possible suspect for a skimmer.
- kumarvvr 9y agoHC-05, is the module code and default name for the BT connection. Seems very lazy. If I were to do it, I would atleast generate a random name and maintain a list of such names, with a hash function forming the password derived from the name itself.
- tmaly 9y agoI would be really happy to have a solution to detect these skimmers. Either an app or device that can just pickup any of these default ids etc.
- doubles 9y agoThe article mentions this app: https://play.google.com/store/apps/details?id=skimmerscammer.skimmerscammer https://play.google.com/store/apps/details?id=skimmerscammer... Essentially though it's just looking for a bluetooth device called HC-05, so that is also an option.
- tmaly 9y agohmm I need an iphone solution
- labpdx 9y agoThere's a link in the article to an Android app they created called Skimmer Scanner that does exactly this.
- zodPod 9y agoThis is an awesome article breaking this down really well. So why are you all talking about Chip and PIN? Talk about the article and about the technology stop arguing politics of chip and pin.
- maherbeg 9y agoThe first gas station chain that offers Apple Pay/Android Pay as a payment instrument gets 100% of my business. I'm really hoping Costco will enable the contactless payments on their pumps sooner rather than later.
- nhf 9y agoA lot of Exxon/Mobil stations do now.
- gnicholas 9y agoTried this last month, and it totally didn't worked. Tried 3 times and even went in to the cashier twice, who tried to figure it out. Never got it working.
- reaperducer 9y agoIIRC, when I lived on the East Coast in the 90's, Exxon was a pioneer with contactless payments. They had a little round thing that looked like a quarter of a pencil that you could put on your keychain to make payments at the pump.
- dhritzkiv 9y agoI also remember this in Canada in the late 90s. ESSO had such a device. I think other stations (Shell, Petro Canada) also did.
- spilk 9y agoThe new gas station near my house does contactless. I think that now that the credit card networks are pushing liability onto the merchants we will start to see more and more of these popping up.
- maherbeg 9y agoHeh unfortunately gas station pumps are exempt from the immediate liability shift and get an extension (https://usa.visa.com/visa-everywhere/security/emv-at-the-pump.html https://usa.visa.com/visa-everywhere/security/emv-at-the-pum...) which means this will be a prime attack vector as the shift changes over the next few years.
- patrickfl 9y agovery thorough article - I've always wanted to know how these worked. I had no idea that many of them used Bluetooth / serial etc. One revision to the post I'd like to see - I'd love to see a section on how they attach to the actual reader. I know they mentioned MitM attacks, but do these readers fit over the top of the skimmer? underneath? behind the entire skimmer? are the visible from the pump itself?
- m1n1 9y agoThey open the pump face, unplug the back of the existing reader, plug the front of their skimmer into the back of the existing reader, and connect the first plug into the back of their skimmer. It goes from ? --> reader to ? --> skimmer --> reader The face of the pump appears unchanged (unless they broke a security sticker and were unable to replace it)
- exabrial 9y agoWhy are we still using magstripes? It's 2017! There's all this cool stuff happening! I have a laser-guided robotic vacuum cleaner. SpaceX is landing rockets on boats. The Navy has a real life railgun. We have self driving cars, which means it's only a matter of time before there's a country song about a guy who's truck leaves him. Yet... I can't pay for something securely. Please, no more signatures. NFC or Chip/Pin please!
- jamez1 9y agoIf your credit card number is stolen you simply contact the provider and they will (usually) refund any fraudulent charges and send you a new card. In turn, the credit card companies simply do a charge back to the gas station (taking the money from the station and refunding it to the customer whose card has been stolen). There is no charge back to the gas station, the cards are used to steal other things. They were just skimmed at the station.