4 ms·
Question, how do you test if a bar of gold is really 100% gold without deforming it?
by amelius 1y ago
Question, how do you test if a bar of gold is really 100% gold without deforming it?
- diggan 1y agoI love that this question, asked 20 minutes ago on HN, probably been asked on a monthly if not weekly basis by so many people since the invention of gold as currency.
- roenxi 1y agoThe cheap approach is to check the density - weigh it and measure the volume. But I don't see what the issue would be with melting the gold down to check. There isn't that much of it.
- jcla1 1y agoMeasure its volume by dunking it in a jug of water and compare its weight with its expected weight (depending on the density of gold). There is a famous tale of Archimedes doing exactly this when posed with the problem of determining if a certain crown is made of pure gold.
- reedf1 1y agoPresuming you can create an alloy with the same density as gold, I imagined you could also test it's conductivity. I think performing both tests would be enough.
- celticninja 1y agoNo need for an alloy tungsten will do.
- adrian_b 1y agoIt is rather expensive to make objects of pure tungsten. The tungsten objects that you see for sale are not pure and they have a density more than 5% lower than gold, which is easy to detect by weighing.
- celticninja 1y agohttps://www.businessinsider.com/tungsten-filled-gold-bars-found-in-new-york-2012-9 https://www.businessinsider.com/tungsten-filled-gold-bars-fo...
- adrian_b 1y agoThe only metals with which you could make an alloy with the same density as gold, but cheaper than gold, are uranium and tungsten. Other metals would require too big additions of expensive rhenium/osmium/iridium/platinum to match the density of gold. The best choice for matching the density of gold is tungsten, but even with that the cost for an exact match of the density would be high. The tungsten objects that are found easily in commerce have a density significantly lower than gold, because they are made from tungsten powder sintered with nickel, not from pure tungsten, which is hard to melt. The conductivity test is good, but not easy to perform when the object has a complex form. Surface conductivity is easy to measure on any object, but the object could be plated with pure gold, so surface conductivity would show no difference. For a gold bar of standard dimensions, it should be easy enough to make a text fixture allowing the measurement of the bulk conductivity.
- zaik 1y agoApparently there are bars which are tungsten on the inside. Tungsten has a very similar density.
- pixelpoet 1y agoThis was famously answered by Archimedes in his Eureka moment: https://www.longlongtimeago.com/once-upon-a-time/great-discoveries/archimedes-and-the-golden-crown https://www.longlongtimeago.com/once-upon-a-time/great-disco...
- Invictus0 1y agoThat's a children's parable. You can easily defeat the test by using two metals, one denser than gold and one lighter, whose combination matches the density of gold, and then putting a veneer of gold on top of it.
- holowoodman 1y agoYou can nowadays look at a 3D-plot of internal density in an X-Ray computed tomography. On the chance that somebody mixed up an alloy that has the exact same density and X-Ray density as gold, you can try X-Ray absorption spectra which depend on nuclear resonances of different nuclei, so would conclusively prove presence and amount of non-Gold material. And you can do activation analysis, where you activate the ingot with neutron radiation such that Gold isotopes form and decay. You then measure the decay gamma radiation spectrum and look for decay lines that are not gold but another material. This is non-destructive, but will make that ingot slightly radioactive for a while, but nothing that a few weeks of patience to wait for the decay can't fix. Oh, and nuclear magnetic resonance (NMR) spectra would also work, but usually those machines are for very small samples in the milligram region. No idea whether there are some that could fit a gold ingot.
- namibj 1y agoYou know slightly different NMR machines are used to scan entire humans, right? They only really differ in scan pattern for this aspect. That's IIUC just a software change.
- holowoodman 1y agoAfaik not really. The ones that scan humans are tuned for a specific proton resonance frequency, so they basically measure hydrogen density. But you get a 3D-Plot because they do a computed tomography of that density. The chemistry NMRs are spectrographs, so you dial through a whole frequency spectrum and look at the reflected/transmitted signal. With that you get different peaks for different nuclei plus some deviations for crystal or molecular structure. But I have to admit, that I'm a little rusty on that topic, so you might be right anyways.
- bhickey 1y agoDensity, conductivity, x-ray. Density alone won't rule out bars that are spiked with tungsten.
- Y_Y 1y agoMy first guess would be that your gold bar isn't 100% gold, because alloying with a little copper or silver will give you more durable and practical ingot. Ifyou look at a typical gold bar they'll usually have embossed their purity. Even "pure”, 24-carat gold is probably "fineness" 998 or 999, which translates to 99.8% or 99.9% by mass.
- corford 1y agoHere's a very informative video on this from a 30+ yr COMEX gold trader (the mechanism and cost to do it is discussed from about ~8 mins in): https://themarkethouse.substack.com/p/video-alyosha-with-a-reality-check https://themarkethouse.substack.com/p/video-alyosha-with-a-r...
- cantor_S_drug 1y agoI have an auxilary question. Why don't countries have Gold Embassies around the world? Accounts which can be settled in Bulk (e.g. say $100 million gold equivalent size). This way no one country has monopoly on reserve asset.
- kasey_junk 1y agoThey do. Countries frequently store gold with trading partners or allies. Germany for instance has extensive foreign gold reserves.
- cantor_S_drug 1y agoBut then the next question is why aren't those used as settlements mechanism?
- kasey_junk 1y agoThey are? The issue here is simply that the country thinks there is an imbalance. They can request a in country transfer and do, but in this case it’s not enough.
- AnimalMuppet 1y agoBecause international settlement is huge - something like a trillion dollars a day. (Or maybe that's just currency exchange, which might contain speculation in addition to settlement? Or is that a false distinction?) Anyway, moving that much gold would be slow, inconvenient, and a significant risk.
- mortehu 1y agoMaybe unrelated to your question, but the individual bars in the Fed vault have specific owners. They are not mingled.
- signaturefish 1y agoOn the individual scale, something like a Sigma Metalytics resistivity analyser (passes an electric field through the sample, checks to see if resistivity, conductivity, weight or size all match up to what you'd expect from a homogeneous gold sample of that size or weight). On the commercial scale, an XRF spectrometer. Both methods are completely non-destructive, and highly accurate (the XRF more so). (the two scales are due to price and bulk: the Sigma is about the size of a hardback book and a few hundred pounds, an XRF is the size of a large 3d-printer and many thousands).
- hoseja 1y agoDoes XRF penetrate the sample? Isn't it a surface measurement?
- signaturefish 1y agoXRF will go a millimetre or so into the sample AFAIK - it's mainly useful for finding alloy contamination, e.g. "this is 99.99% gold" vs "this is 73% gold and 27% other things" - you really want to use both techniques. Resistivity/conductivity is about average composition, XRF is about elemental purity.
- weberer 1y agoThey have handheld XRF analyzers nowadays. They cost around $20k.
- signaturefish 1y agoHuh, impressive - I guess I'm out of date (and/or the people I listen to about such things have a working XRF already and don't want to replace a working unit).
- yread 1y agoYou can get a used one for like 3k. I don't really need it but I have it on my santa's list for ages already. One day he will deliver I hope
- charlieyu1 1y agoBeen to a pawn shop in Hong Kong that deals with gold. They still buy small gold nuggets and simply check by juggling. So probably weight, volume and malleability, and that probably fake golds aren’t a big deal for them.
- deleted 1y ago[deleted]
- 1970-01-01 1y agoNobody is holding 100% gold. The highest purity is 99.999% and anyone holding that either has an outstanding reputation and XFR scans to back that number or is trying to sell you a lead brick.