6 ms·
Base 10 is not a good base
- wheresmyshadow 3y agowhat kind of yankee propaganda is this! just kiddin, interesting observation though.
- pentaphobe 3y ago[off topic / meta] The internet seems to increasingly just be a place to rewrite old thoughts but with less actual content (or more content with less actual thought behind it). Could be confirmation bias, but I feel like there was a clear transition when comment threads on forums became more prone to top level repeats of the same thought rather than replies to the first person who had the same thought. ("Came here to post this" ain't great, but I'd take it over dozens of blindly typed repetitions) Seems to have bled out into blog posts too now. Can't imagine this will reduce with LLM (mis)usage. Is it just that we read less? That there's so much new information and such pressure to produce that there's no time for discourse? Has information reached such critical mass that we're all emboldened with the assumption that all which came before was cruft? Genuine question, not rhetoric (and I'm certainly guilty of the same thing - perhaps someone already expressed this in a comment below and I didn't even look) but I'd love to see it balanced by something if not solved. Can we still somehow return to building on the shoulders of giants, or are we doomed to an eternity of posturing and feigned originality? Seems like it'd be an interesting topic to explore if it hasn't been already - any sociologists here?
- mulmen 3y agoScreaming into the void: the US Customary system is not the Imperial system.
- euroderf 3y agoCall me a loonie but I say that base 16 is pure math and anything else is a symptom of corporeality.
- MrResearcher 3y agoI vaguely remember back during my university days, the Discreet Math professor proved mathematically that base e=2.71828... was most efficient. And concluded that the optimal base would that of 3 or 2. Unfortunately, I no longer remember the basis of his argument, nor the entailing proof.
- snvzz 3y agoBase16 would have been great. Base8 would have been workable. Base10 is just crap. It is quite unfortunate how it is embedded in society now.
- timbit42 3y agoBase12 is better than Base8 or Base16 because it's divisible by 2, 3, 4 and 6. Halves, thirds and quarters are handy.
- MBCook 3y agoAs long as we use base 10 numerals, using a base 10 system is going to make things real easy.
- fragmede 3y agowhat about 12, or 60?
- crisply5706 3y ago> It is quite unfortunate how it is embedded in society now. It's been this way for a couple thousand years
- DonHopkins 3y agoA bit longer than that: a couple 1024 years, at least!
- DonHopkins 3y agoMaybe with the use of AI, humans can evolve to having 16 fingers!
- timbit42 3y agoFirst off, base 12 is better than base 16 and there would be no need for AI to evolve humans with 12 fingers: https://www.youtube.com/watch?v=DRjmRNsPl1M https://www.youtube.com/watch?v=DRjmRNsPl1M
- nicoburns 3y agoBase 12 with a couple of extra numerals would be really fantastic. Don't see it happening unfortunately.
- Gibbon1 3y agoWe could use genetic engineering so people have six fingers. However better would be to genetically engineer humans to have four arms and ditch the pinky, then we could use base 16.
- derekp7 3y agoCultures that counted in base 12 used each finger segment (there are 12 on a hand), and used their thumb as a pointer. So we already have all the biological tools needed.
- timbit42 3y agoBase 12 is better than base 16 because then you have halves, thirds and quarters.
- deleted 3y ago[deleted]
- waldrews 3y agoLet's try to phase it in gradually. We'll petition congress to move to base 12, but will compromise, and use base 11 for a while. Then, if people are still not ready for base 12, we can move on to base 11.1 for a few years, then 11.2, and so forth. Maybe once we get to 11.5, we can start a sliding scale where the base increases slightly every day, so people aren't inconvenienced.
- chimeracoder 3y agoBase 60 (like the Babylonians and Sumerians) is actually a terrific base for daily use. Base 12 is similarly good, and more functional. 60 and 12 are both divisible by 2, 3, 4, and 6, which are some of the most common divisions that people need in daily life. Base 60 has the additional advantage of being divisible by 5, 10, 15, and 20 as well. Note that we still use bases 60 and 24 for our timekeeping, and it's extremely convenient to be able to divide up the hour or day evenly into these chunks. The metric system is great for scientific purposes, but the properties that make it good for scientific use are not terribly relevant to household or daily use.
- timbit42 3y ago30 is also divisible by 2, 3, 4, 5 and 6.
- chimeracoder 3y ago> 30 is also divisible by 2, 3, 4, 5 and 6. 30 is not divisible by 4.
- jimmaswell 3y agoReal base 60 would be way too many glyphs.
- devnullbrain 3y agoLess than 1% of what Chinese has
- jimmaswell 3y agoNot an example of a sane system.
- makeitshine 3y agoNot for numbers. 零一二三四五六七八九十百千萬億 is all you need to get into the billions. It's not as practical for computation, though.
- Waterluvian 3y agoAnd then there’s radians, which make sense at a technical level but really ought to be rendered in degrees if a human needs to look at it. 360 feels really good to work with. Maybe I’m biased.
- User23 3y agoI would like to see a switch to a 420 degree circle since it’s also divisible by seven, which is nice for calendar purposes, among other things.
- sukmaagung 3y agoRadian don't give simple numbers for simple angles. For example the right angle, in degrees it is 90deg, in radian it is 1.5707963267948966... Better using tau-radian, it is 0.25tau (right angle is 0.25 of full circle).
- CoolestBeans 3y agoI agree but it's more important that we share a common system and it's incredibly expensive to switch (not just monetarily). For better or worse, if there's gonna be one system it will be decimal. Take heart that decimal time didn't catch on.
- pessimizer 3y ago100 hour days are exactly what I think of the metric system. It's good for science and engineering, so you're not constantly converting bases; but when it comes to daily, human-scaled activity, I want numbers that are small and easy to divide. 1 / 4 == 3 is a lot nicer than 1 / 4 == 25.
- Dylan16807 3y agoOn the other hand, you just calculated the wrong number for how many hours are in a quarter of a day.
- pessimizer 3y agoI didn't calculate how many hours are in a quarter of a day. I mentioned 100 hour days, and then mentioned how it's nicer when 1 Foo divided by 4 equals 3 Bars, instead of dealing with 1 Baz divided by 4 equaling 25 Qux. It was a very short comment.
- Dylan16807 3y ago> I mentioned 100 hour days, and then mentioned how it's nicer when 1 Foo divided by 4 equals 3 Bars, instead of dealing with 1 Baz divided by 4 equaling 25 Qux. What's the connection between those two mentions? Surely you're not saying mention 1 is unrelated to mention 2. And it really looks like an attempt to do the same calculation with both system. It would be very weird if Foo and Bar were an analogy for feet and inches for example, and even weirder if they weren't an analogy for anything.
- imtringued 3y ago
- waldrews 3y agoMeh, every base is base 10, in that base. The Babylonians had base 60 (more or less) and they did serious astronomical calculations way back in the day. Maybe we could do that again.
- _mlbt 3y agoWe put several men on the moon and have sent unmanned spacecraft past the solar system with base 10. I think it gets the job done as far as astronomical calculations are concerned.
- User23 3y agoThe Apollo program mostly used US customary units.
- gls2ro 3y agoApollo used metric system when calculating and then transformed for displaying to imperial. source: https://space.stackexchange.com/questions/37607/why-did-nasa-use-u-s-customary-units https://space.stackexchange.com/questions/37607/why-did-nasa...
- deleted 3y ago[deleted]
- User23 3y agoFor the guidance computer. There was a lot more to the program than one guidance computer. If you keep reading the very source that you yourself linked you’ll find that NASA generally used customary units. Hence my qualifier “mostly” in my entirely correct comment you replied to.
- pessimizer 3y agofoot-pounds
- lisper 3y ago
- yedpodtrzitko 3y agoHow about multiplying? Do quickly 10 * 10 * 10 * 10 vs. 12 * 12 * 12 * 12
- atomicnumber3 3y ago12 * 12 * 12 * 12 in base 12 is 10 * 10 * 10 * 10 though, it's exactly as easy.
- devnullbrain 3y agoBoth are the same in their own base. 9+1 isn't inherently easier in arbitrary bases - do you know what 10000 is in hexadecimal without working it out?
- leereeves 3y ago> do you know what 10000 is in hexadecimal without working it out? I do, because it's 2^16, a very important number in computer science (though less important now). But I won't spoil it by giving the answer.
- devnullbrain 3y agoWrong way around.
- nicoburns 3y agoIf you add extra numerals for eleven and twelve (lets say A and B) then 12 (base ten) is written 10 (base twelve) and multiplying in base twelve becomes just as easy as multiplying in base ten usually is.
- mfcl 3y agoBut in base 12 the number 12 would be written as 10. 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, a, b, 10, 11, etc.
- pushedx 3y ago10 * 10 * 10 * 10 in base 12 is 10000. <12> * <12> * <12> * <12> in base 12 is 10000 Assuming that you mean the decimal number "12" and not the number 12 in base 12 which is the decimal number 14. In base 12 the number 12 is written "10"
- DonHopkins 3y agoWhile you're at it, round the number of days in a week by adding another Taco Tuesday!
- thorum 3y agoFor most kinds of human systems, evolution selects for resilience, flexibility and ease of communication instead of logic and efficiency. So we end up with things that are kind of weird but somehow remain dominant for thousands of years, while your perfectly designed alternative never gets off the ground. Metric is surely a great leap forward than what we had before.
- friend_and_foe 3y agoMetric is entirely built around base 10. Either they're both fantastic or they both suck.
- superluserdo 3y agoSpeaking of mathematical missteps relating to bases, I've always been baffled by why we refer to a base system by the number above the highest representable single digit. Every base is "base 10" in that case! Why is binary referred to as "base 2", when the number 2 doesn't even appear? Wouldn't it make infinitely more sense to refer to our conventional number system as "base 9", binary as "base 1", unary as "base 0", and hexadecimal as "base F"? Or we could have used a more sensical word like "ceiling" or "roof" in that case, to convey that it's referring to the highest single-digit value in the system.
- andsoitis 3y agoBecause it refers to the number of digits in the system. Base 10 comprises ten digits, viz. count(0, 1, 2, 3, … 9) = 10z Base 2 is count(0, 1) = 2 Base 16 (hexadecimal) is count(0, 1, 2, 3, … 9, a, b, … f) = 16
- jvanderbot 3y agoStraight and true. The other view is fine too: Base-9 would mean "max number is 9".
- davrosthedalek 3y agoThe base b is actually the multiplier for the value in each digit: the first digit is b^0, the next to the left is b^1, the next left is b^2. Similar for right of the dot: b^-1, b^-2....
- alexb_ 3y agoBut your counts are all using base 10! If we were to count the number of digits in binary using binary, we would get 10 digits. If we were to count the number of digits in hexadecimal in hexadecimal, we would still get 10 digits. This is true for all bases.
- maxerickson 3y agoChanging the representation doesn't change the number. Ten, two, sixteen...
- mlhpdx 3y agoI use base72 every day.
- majormajor 3y agoI think dividing by 10 is much more useful than the author admits and better than dividing by 2. It's a fine starting point. I realize the author isn't necessarily explicitly defending the Imperial system that strongly, but 2 by itself is a big meh. E.g. even in the parts of the Imperial system that use 2 as a main factor (1", half inch, quarter inch, etc for small measurements) you end up with a bunch of stuff like "take 1/16th off of 3/4ths" that is less obvious than something like "take a millimeter and a half off of 19mm" when you're dealing with a base-10 number system. (Even before taking into account the conversion to feet that isn't a power-of-two based one, but is instead a factor of 12.) Two just isn't a big enough divisor, ten works much better as a "step change" interval. A measurement system that was uniformly 8 or 12 or 16 could avoid that problem by having equivalent steps to mm, cm, meter, etc. but still runs into the problem of having to change the entire number system too which is rather not the fault of the metric system in the first place.
- timbit42 3y agoDividing by 10 is much more useful because you are using base 10. If you were using base 12, then dividing by 12 would be much more useful.
- mlhpdx 3y agoYep, particularly when counting fingers. That in mind, I wonder why base 5 wasn’t a thing since it would have been easier to keep track of the “digits” up to 25.
- jprete 3y agoDividing by two has one very significant advantage - the brain is equipped to directly compare two lengths, so a division by two is easy to eyeball and get roughly correct. That's probably also why music is almost always spaced using powers of two, with potentially a single three or occasionally a five - the brain can easily track and measure equal divisions.
- majormajor 3y agoI think that makes a lot of sense in music or other "divide this up" tasks that don't require concrete objects but that's not most of what the metric system deals with. And time isn't decimal-based at the larger-than-one-second level, after all. But in the world of concrete objects "eyeball this into two pieces" is much less useful and less common than "ok so we need to account for the extra 3mm of this extra piece so add that to the 44mm base measurement" - which is much more straightforward than something like "add 3/32nds to 1 and 3/4 inches." especially if you don't know that you're gonna end up with a measurement in the 32nds when you make the first measurement. Or larger-scale like "we went six hundred feet already, we needed to go a mile and a half, how much is left?"
- imoverclocked 3y agoBase 10 is an excellent base for exactly one reason: we all know it and use it. All bases have trade-offs but a common language/base beats any slight technical reason that another base should be put into general use. We can celebrate the fact that our notion of numbers is flexible enough that we can easily represent other bases without significant reach. Eg: Imagine trying to express another base with Roman numerals.
- arcastroe 3y agoBase 10 is an excellent base for exactly one reason: we have 10 fingers Is what I thought you were going to say. But I do sometimes wish we had 12
- timbit42 3y agoOnly one gene affects whether you have 10 or 12 fingers and thumbs: https://www.youtube.com/watch?v=DRjmRNsPl1M https://www.youtube.com/watch?v=DRjmRNsPl1M If we can convince everyone to have 12 fingers, maybe we can convince them to switch to dozenal.
- imoverclocked 3y agoIt depends on how you use your fingers to count. Most of us are taught to raise one finger, then raise another … one-by-one until they are all raised in order to count to ten. We can also use our digits as digits and then each finger can be one bit: closed is zero and open is one. This scheme allows for binary counting and even generalizes for people with different numbers of fingers. Lose a finger? You can still count to 511. Gain two fingers through genetic manipulation? Now you can count to 4095! Maybe the binary coded decimal fans can reduce their counting space and count to 99 with two extra bits left over for holding their pencil! Base 12 or maybe “base 10” where 10 - 1 = B could more efficiently be encoded in the same way so that one can still count to BB and have two bits left over! The world is chock full of possibility. In the meantime, we have really cheap calculators available so we can divide 7 by 3 and not have to cut one of our fingers partially off to express the result.
- mechhacker 3y agoIt really seems like the ancients knew quite a bit. Their system for counting and for angles seems to have been really handy. And the measurement system of feet and inches was really close to what everyone had readily available.
- tiffanyh 3y agoBase 60 Sumerians used Base 60. https://en.wikipedia.org/wiki/Sexagesimal https://en.wikipedia.org/wiki/Sexagesimal It’s the most divisional number under 100. Hence why 60 is still used today for so many things (clocks, degrees, etc).
- timbit42 3y ago30 is just as divisional as 60 as it is also divisible by 2, 3, 4, 5 and 6, but 12 x 5 = 60 so I guess that's why they used 60 instead of 30.
- cduzz 3y ago"it is the most divisional number under 100" implies there's some committee of Hammurabi where "they" evaluated all the possibilities and decided "60 is the best". My understanding is that it's "finger bones between knuckles reachable by thumb" and "count of times counted through all knuckles". Meaning you count to 12 with one hand (thumb incrementing through finger bones) and then count 13-60 by incrementing the other. It just so happens that 12 * 5 ends up having a fantastic number of divisors.
- foota 3y agoIf you're deriving a number by repeatedly adding (e.g., 5 12 times), you should be bound to have a greater than average number of divisors. So in some ways it's not entirely coincidental. In fact, 12 is derived the same way, 4 fingers times 3 knuckles, so the only coincidence is that 4 is divisible by 2.
- cduzz 3y agoI'm saying that the base 60 Babylonian system is derived from how many fingers people have on each hand and how many segments per finger, not because it's a fantastic base because it's got lots of whole divisors. If people were Disney cartoon characters (3 fingers + thumb) they'd likely have used base 36 (9 segments, 4 total digits on other hand). And yes -- by having a mixed system like this you'll end up with more divisors than if you only count digits.
- pushedx 3y agoI 100% agree with this. The dozenal system makes mental math easier. The dozenal system makes everyday calculations more precise. 100 in base 12 (144 in base 10) is divisible by 1, 2, 3, 4, 6, 8, 9, 12, 16, 18, 24, 36, 48, 72, 144 (base 10) The mental model of these proportions would be accessible to us relative to quantities of 100 base 12, in full precision, if we used base 12. We could readily divide common quantities into halves, thirds, quarters, sixths, eighths etc. and get results in whole integers. No more errors due to estimations of 1/3 * 100 as 33.333333.. and 1/9 as 11.1111111.., 100 / 3 = 40 in base 12, done. 100 / 4 = 30 100 / 8 = 16 100 / 9 = 14 100 / 12 = 10 Look how nice that is. 100 base 10 is only divisible by 1, 2, 4, 5, 10, 20, 25, 50, 100 (base 10) It's really a tragedy that we use base 10.
- Dylan16807 3y agoIn everyday calculations, I don't find myself using thirds significantly more often than fifths.
- timbit42 3y agoI wouldn't either if I had to use Base10 instead of Base12.
- alexb_ 3y agoAlso relevant: https://www.seximal.net/ https://www.seximal.net/
- abecedarius 3y agoI'd propose balanced ternary, but grouped in digit-pairs (9 possible, each with a one-syllable name, essentially as efficient to speak as decimal).
- odyssey7 3y agoWhat about the children? Rather than presenting a rhetorical device, I’m genuinely wondering what would happen to math literacy rates when switching to something like base 12. It isn’t a question about specialist use cases, because we already apply plenty of specialist systems as needed, such as binary and hexadecimal in computing.
- dempedempe 3y agoI've always wondered this as well. In one case, math literacy among the Inuits actually went up significantly when they allowed them to start using their native base 20 system school[1]. Although, they also designed a new system of iconic numerals, so I think that was what caused the increase in math test scores (since you can do arithmetic visually with an iconic numeral system). 1: https://en.wikipedia.org/wiki/Kaktovik_numerals https://en.wikipedia.org/wiki/Kaktovik_numerals
- TraspSE 3y agoI agree with base 10 being inconvenient, but I'm failing to see what that has to do with the metric system. The principle could be applied to any base; base 10 just happens to be the one that we're (currently) using.
- rhelz 3y ago> I'm failing to see what that has to do with the metric system You are an apprentice house builder. Your boss hands you meter-stick, with 100 lines on it to mark out the centemeters, and asks you to cut him a piece of wood which is 1/3 meter long. This puzzles you, because you can't find a line on that stick which indicates 1/3rd of a meter. So you go back to your boss, and he grumbles, but gives you another meter stick, with 1,000 lines on it. You still can't find a line on the stick which indicates 1/3rd of a meter....
- rhelz 3y agoLooking over the replies to this post, its pretty obvious that some of you have never really actually built anything requiring any amount of measurement. "Why don't I just give my boss a 33mm piece?" -- and leave a 1mm gap in your house, where ants can come in, and heat goes out.... "Why would I ever need a board 1/3rd of a meter long?" -- sigh it could just as easily be a board 10/3 meters long, or 200/3 meters long. Because 3 is a small prime, and by the fundamental theorem of arithmetic, 3 is going to be a factor in a lot of integral lengths. Say you are designing a switch with two buttons on it, "on" and "off". Well, the centers of those two buttons are going to be located at 1/3rd and 2/3rds of the length of the plate they are mounted on. Say you design a crock pot with 3 buttons for the heat, "low", "medium", and "high". You don't want two of those buttons to be 1cm apart and the other 2cms apart! If you look at countries like, say, Japan, or Germany, which really do use the metric system, you'll find that they measure things not in centimeters, but in millimeters. And the lengths they use are numbers like 48, or 120, which have lots of factors of 2 and 3 in them. Because you divide lengths into 2 or 3 parts all the time. Which is to say, if you want to actually use the metric system in industrial design, you don't use a lot of lengths which are powers of 10. You use lengths which are divisible by 12 anyways. There's a reason the U.S. never went off the English system, and why countries like Canada and the U.K., which actually make real efforts to try to go off of the English system still use a lot of English units in everyday measurements. And it's not just because of conservatism, or NIH syndrome.
- temporarely 3y agoSo this guy won an Oscar for writing code. That's pretty wild. We could make the switch to 12 if we wanted. Ten fingers and two hands, so we can make a case that it is 'natural'. Then we have 2 and 3. Time is already on base 12/24. Then someone says hey, we got 5 fingers! And we're now doing base 60. Old school Sumerian. Time still works as well. All we need are glyphs for the digits, somehow reflecting the natural partitions into 12, 5, 3, and 2.
- rjmill 3y agoBase 6 is my ideal base. Divisible by 2 and 3. All primes aside from 2 and 3 are gonna end in 5 or 1. When you count on your hands, you can use one hand for 1-5, and the other for your 10s (6s) so you can count much higher on your fingers.
- gmuslera 3y agoIf we were using a base 12, 24 or 60 from the start, the metric system would had used those bases. It is not about the metric system, is about our numeric system. Metric may be not perfect, but is not in the same category of mess that is the imperial one, specially if he is complaining about proportions between different units of measurements.
- apantel 3y agoBase 10 is dominant because we have ten fingers. The fingers are a register that can count up to 10. Once you fill the register you increment a ‘tens’ counter (in your mind) and clear the register. Base 10 is just an elaboration of that. So the first system of primitive counting was probably base-10, and then base-10 won. Go figure.
- JellyBeanThief 3y agoWe also have 12 phalanges in our fingers.
- drivingmenuts 3y agoSome days, I can't tell if someone is being serious or sarcastic. Might be time to quit the internet.
- more_corn 3y agoBase 16 is a good one. You can count on your fingers if you use the first pad and each crease. I am still tickled that four digits of binary is one digit of hex. You can just plop them down on top of each other and convert four at a time. Compared with the hell of going between binary and dec it’s a joy. I must say though that there’s a certain awe and glory in bouncing a dec number up and down by 10x by moving the decimal. Bases aren’t “good” or “bad” you the user are either good or bad at dealing with them. If you think a base is bad you’re probably not working hard enough to use it well. Or trolling. Maybe you’re just trolling.
- timbit42 3y agoBase12 is better because it's divisible by 2, 3, 4 and 6. Base 30 or 60 are also divisible by 5.
- deleted 3y ago[deleted]
- SPBS 3y agoSo this is an argument for the Imperial system. It's never stated in the post, but if you don't like the Metric system then what are you arguing for? There's only the Imperial system left. Here is why the Imperial system is bad: - It's not consistently base 2 (or base 12), it's more like base random. - Imperial calculations still use base 10 numbers for representation! This is the worst of both worlds. You can argue that base 10 is inefficient but at least the Metric system aligns perfectly with it, as compared to the Imperial system which uses base random and base 10 numbers which cannot perfectly model many Imperial system values. > Metric’s entire foundation is a bad base. You're stuck with base 10 numbers. Don't blame the base, pick a better system.
- deleted 3y ago[deleted]
- DemocracyFTW2 3y ago> Metric’s entire foundation is a bad base Given how this very short rant of a blog post is technically right that 10 is not a very integer-division-friendly base and how it uses imperial measures to illustrate the point—the pain point with imperial measures is not that they don't take base ten, the point is that it takes a plethora of multiplicators between commensurate units and that none of those multiplicators lines up with the way we say and write numbers. The obstacle from switching from colloquial "four in the afternoon" to "16:00" (not e.g. "14:00" which for a learner would be the obvious but wrong answer) is not to blame on the multiplicator, it's the fact that the multiplicator is not the base of our counting. Another obstacle in adding up seconds, minutes and hours and to say the results in terms of days, hours and so on is that several multiplicators—12, 60 and 24—are involved, none of which is a power or at least a multiple of the base that we use for expressing the results. Of course none of this even touches about the great utility of a system where one liter equals a thousand cubic centimeters, with water weighing (OK, "massing") one kilogram (at standard conditions, imagine all the hedges), and where all mass measurements are based on the kilogram, all lengths on the meter and so on. In imperial, the horizontal distance from you to that tower is given in miles, yrds or feet depending on your habits and how far away you are; the height of the tower will most likely be given in feet, the vertical distance to a plane high in the sky curiously in feet, too, but the distance to the ISS in miles. In metric you do something similar in choosing between centimeters, meters, kilometers as you see fit, but crucially the digits remain the same, only the decimal point shifts somewhere else. This is what they wanted when they initially proposed the metric system near the end of the 18th century; SI is building upon this and greatly expands the system.
- Ekaros 3y agoNothing really prevents using metric system in other bases. Quantities of units with prefixes and some numbers would change, but nearly all of it would still all fit together...
- DemocracyFTW2 3y agoOne observation that I'd like to share is that in the olden days, people not only used a plethora of units for things (like in the UK 'pounds' for weight in general but 'stones' when weighing people, &cpp), the also like to use fractions like 1/2 or 2/3 when dividing units. Both observations seem to hold true from ancient Egypt and Babylonia all the way to Europe into the 19th and, in places, the 21st centuries. The opposing view is that we'd be better off using only powers of one single factor—10—for all commensurable units, and prefer decimal fractions for calculations. I've frequently seen people argue in favor of the imperial system arguing that one-third, one-fourth, three-eighths of an inch is so much more natural than, say, 0.5m, 0.33m and so on. I have hardly to point out that this perceived advantage (that I believe in to a degree) breaks down as soon as you want to add and multiply: what's 2 times 3/8ths plus 1/3rd? When calculations increase in complexity, using only fractions of a single base and its power—and using a base that is already the base of the number system that you think and count in—takes a lot of incidental complexity out of the system.
- librasteve 3y agoi only have 8 fingers - maybe i’m an alien
- timbit42 3y agoSome people have 10 fingers: https://www.youtube.com/watch?v=DRjmRNsPl1M https://www.youtube.com/watch?v=DRjmRNsPl1M At least some, perhaps all, of the giants in the Old Testament of the Bible had 6 fingers on each hand: "In another battle at Gath, there was a tall man who had a total of 24 fingers and toes: six fingers on each hand and six toes on each foot. He also was a descendant of Haraphah." - 2 Samuel 21:20