9 ms·
Why software engineers like woodworking (2021)
- michaelbarton 3y agoI’d also recommend trying ceramics too! It scratches a similar itch
- fuzztester 3y agoAfter reading this thread for the second (only some of it each time), I was just about to comment: "I wonder how many software engineers like pottery and other such hand crafts", but then I saw your comment above :)
- michaelbarton 3y agoYes! Having done both I like how short the feedback loop is for ceramics, and how much oppourtunity there is for optimisation!
- testfrequency 3y agoIt’s true. Most of the common hobbies I know of my SWE friends in California: - Woodworking - Diving - Restoration
- Terr_ 3y agoThat reminds me of a satire going around, about what it would be like if carpenters were hired like software engineers. (In particular, requiring an arbitrary number of years of "walnut" experience.)
- Gigachad 3y agoI guess the difference is that woodworking stuff you can show pictures and videos of stuff you've made. While software engineering is often sensitive internal information or team work where the stuff you did is very mixed with what others did.
- jpgvm 3y agoI would agree if I didn't have a reasonable body of work of either OSS software I have written or large OSS projects I have contributed to. The two together demonstrate I can make whatever I want from scratch and that I can work well enough with others to be part of something bigger. The fact I still get ridiculous coding "exams" etc or pointless take-homes makes me think that most of our industry still doesn't take attracting and hiring actually good talent very seriously.
- fatbird 3y agoYou offer "years of walnut experience" as if it's patently silly to do so, but woods vary quite a lot by many relevant characteristics, and if someone showed up for a walnut job having worked exclusively with maple, I'd be sceptical just because I've been learning the difference first-hand between the two. Walnut is brittle and open-grained and presents a different set of challenges than a forgiving close-grained wood like maple or birch. It's like someone interviewing for a Python position saying "I've got zero Python experience but a lot of JavaScript experience, but how different can they be? They're both interpreted languages used for scripting and web dev, right?" I might not reject them out of hand, but I'm going to prefer a comparable candidate whose direct experience is with Python.
- Terr_ 3y agoIIRC in that particular example--found an HN entry but the link is dead--the applicant affirmed that they'd worked with walnut, but couldn't put a year-number to it.
- convolvatron 3y agoI do metal, but it's largely the same. maybe more tool building. the main thing that's missing here is that you _actually get to finish something_ without getting bogged down in politics and bikeshedding. you can actually talk to your users and find out what's important to them. no one is going to show up in your shop with a 30 in 1 multitool and say 'you have to use this' instead of the plane you know is going to do the right job.
- data-ottawa 3y agoMy brother works in a machine shop and they get rush orders, there’s politics with the engineers providing the plans, and the boss fights any needed tools or upgrades. I think once you transition into a production environment both jobs lose their lustre.
- readingnews 3y agoI did woodworking long before programming of any kind. There are some subtle but critical differences... Mess up bad in programming, you may loose your job. Mess up bad on the {table,band,radial arm}saw or jointer,planer,lathe and you may loose a {finger,limb,LIFE} Cleaning up in woodworking is pretty much required, where as in software, some one typically has to yell at you to do it. If you do not clean the table saw, or dust collector, it will stop functioning. This happens a lot sooner in woodworking than the "technical debt" of software. Personally, I prefer woodworking to software, but I think a lot of people romanticize woodworking or trade types of hobbies after doing software for a while. The truth is that it will take you a long time to be able to bang out one of those picture perfect awesome furniture items... and that piano level, three feet deep finish you see other people do... Yeah, tell me how easy that was to get. It is just like software in that respect. Good clean code takes time. Good looking woodworking takes a lot of experience.
- derekp7 3y agoWith woodworking, you can say you are going for that country charm rustic look. Then each defect is "character". End the end you can still have a functional useful piece.
- mauvehaus 3y agoIf you really want some stress in the shop, teaching is hard to beat. I'm not a naturally graceful or coordinated person, but I am at least pretty aware of where my body is relative to the sharp things. It's my experience that not everyone has that.
- avemg 3y agoThe things I like about woodworking: * It's tangible. I can put in a couple of hours of work and then step back and see exactly what's been accomplished. * The techniques are hundreds/thousands of years old. New tools come along (not as quickly as they do in software), but at the end of the day, we've pretty much decided on a handful of best ways to do things. There's always new stuff to learn, but you're very rarely inventing something from whole cloth. * And my personal favorite: Every project has a definite end. That jewelry box or coffee table is FINISHED. Sure, after a time I might put a new coat of finish on something, but once a piece leaves my shop it's done. I'm not forever tweaking this or that about it, trying to make it something it was never meant to be or tearing pieces of it apart to redo the joinery or whatever.
- haroldp 3y agoCovered in sawdust right now from building a pull-out drawer for a kitchen cabinet. It came out square and the joints were tight enough to hold it together for the dry fit. Very satisfying. I am still mostly terrible at this. > It's tangible. This is the best part for me. Programming often reminds me of the "I sell air"[1] scene from City Slickers. The down side of this is that there's no undo. You have 300 operations to step through and if you mess one up you probably need to start over. > The techniques are hundreds/thousands of years old. Watching Clickspring recreate the Antikythera mechanism[2] has made it obvious to me that loads of secret knowledge was trapped in guilds and missing from the historical record as a result. You can do so much with basic hand tools. The down side is that there's so much temptation to buy expensive shit. Or worse, think you can't build anything because you don't have $15,000 worth of pro tools. I really needed a thickness planer on this project. > Every project has a definite end. So much. Fuck maintenance. No down side 1. https://www.youtube.com/watch?v=77xaqFyFET0 https://www.youtube.com/watch?v=77xaqFyFET0 2. https://www.youtube.com/playlist?list=PLZioPDnFPNsHnyxfygxA0to4RXv4_jDU2 https://www.youtube.com/playlist?list=PLZioPDnFPNsHnyxfygxA0...
- tharkun__ 3y ago>> It's tangible. > You have 300 operations to step through and if you mess one up you probably need to start over. This, but ;) I really like that you don't have undo but you still don't have to start over. You have to learn how to build things and what to do when you inevitably eff up and how to cover it up! And then you go around the house and check how the builders/tradespeople covered up their mistakes or how they were simply never as perfect to begin with as you think you need to be. The difference being that unfortunately you will know forever where you effed up and even if you cover it up so that nobody will ever notice unless you tell them, you will be able to see it. I can still see the tile in the bathroom being siliconed in instead of grouted where we opened it up to allow access when re-piping the house vs. the regular grout even though objectively it's exactly the same color and even the texture is close enough. I siliconed it just in case because this was the second to last extra tile, so if we ever need to open it up again, I want to be able to just cut the silicone vs. destroying the tile like the contractor did to gain access the first time. Same when I do woodworking. I will always remember/see the gap that was too wide after I cut it incorrectly and filled it in with sawdust and glue from the exact same wood. I keep a bunch of containers w/ the different wood types' sawdust for just these cases.
- 082349872349872 3y agoFor ancient greeks, wood was considered like we consider bits: as arbitrarily malleable stuff; eg https://en.wikipedia.org/wiki/Hylomorphism https://en.wikipedia.org/wiki/Hylomorphism
- refset 3y ago"Programming with hand tools" (Tim Ewald, Clojure Conj 2013) is a very memorable talk on this theme: https://youtu.be/ShEez0JkOFw https://youtu.be/ShEez0JkOFw
- Gigachad 3y agoI live in an apartment so I've found some things I can make inside. Currently doing sewing and machine embroidery. Making mostly kigurumis/furry related cosplay stuff/plushies and props. It's a lot of fun and something you can do away from a computer. Though the machine embroidery does still require using a computer.
- hammond 3y agoI've often told people that programming is like woodworking: - jigs are like functions - stops are like constants - experience teaches you the order of operations, how things fit together - woodworkers build a lot of their own tools - custom tools are usually made by same stuff the products are - both spend time optimizing their workflow - wood is quite soft, like software!
- tharkun__ 3y agojigs are like functions Jigs (and power tools that use them) are like co-pilot! I love my hand-tools. I know inevitably it's all on the way out, but I like the hand tools more! experience teaches you the order of operations, how things fit together This is how we can still "beat" co-pilot enabled juniors! You can actually understand the whole system and direct an army of juniors! woodworkers build a lot of their own tools Only if you consider jigs your tool(s). I find that this is not actually the fun part of woodworking. Building a workbench from 2x4s from nothing (well, an old ikea table - or sawhorses w/ a sheet of plywood on top), glue to laminate and some 50+ year old plane from Ebay that took a week+ to de-rust and sharpen and handsaws that needed re-sharpening and de-rusting was very satisfying! custom tools are usually made by same stuff the products are Yesssssir! both spend time optimizing their workflow Absolutely! wood is quite soft, like software! It's amazing how hard it can be to work those cheap 2x4s when you're learning. You kinda don't want to use proper hardwood (-ware) for fear of destroying (bricking) something not so cheap!
- latency-guy2 3y ago> the best parts of woodworking aren't actually that different from software engineering What parts of woodworking actually aren't that different from <your favorite profession, probably your own as of the time you are reading this>? Which professions could I NOT relate these items to? Full honesty, looking for professions where these generics do not apply. And this is from the perspective from the actual practitioners in that profession, not outsiders looking in. I.E I don't really want a SWE thinking of using the example of a mechanic, financial advisor, nurse, land surveyor, etc. Woodworking is an old profession turned into very niche hobby for bored people, is that not enough? What is the point to likening X to Y? I would even bet the overlap of woodworkers to the general population is equivalent if not smaller than the overlap for woodworkers to SWEs.
- NoPicklez 3y agoI agree with the above I think we all just enjoy building things and seeing some sort of output and it doesn't really matter where you come from or your profession. It's no surprise that one profession that builds things that people uses enjoys another profession where you build things that people use.
- PaulDavisThe1st 3y agoThere are two implicit claims in TFA: 1. a larger percentage of software folk also enjoy woodworking than in the general population. 2. there is something specific and interesting about the reasons why the software folk who enjoy woodworking enjoy both Unfortunately, we would need to do some significant social science research to determine if either of these are true, and I suspect neither of us have done so (I know I have not).
- bradly 3y agoI left my dream job at Apple to pursue woodworking. If anyone is interested in dipping their toe in, I help out at a 2.5 day weekend workshop on the central coast of California where you come and make a piece a furniture with a master woodworker. We get a lot of software engineers from both the bay area and Seattle.
- johncessna 3y agoI was just looking at Esty wondering if it's time to start making some smalls to see if I could make a living off of them.
- mauvehaus 3y agoFort Bragg? Is that the central coast? I'd love to get out there; I build furniture professionally, and my training is very much in the period American tradition, but my tastes run a lot more contemporary.
- bradly 3y agoPaso Robles!
- davidcuddeback 3y agoJory Brigham? Edit: Nevermind. Answered down thread. Lucky you. Beautiful area and Jory's work is phenomenal.
- bradly 3y agoThank you. I do feel lucky. I cold-emailed him two years ago asking if I can come sand or sweep and he invited me up. He and his family have been great and I’ve met amazing people there. His workshops are my favorite weekends of the year, and I’m working during them, so I highly recommend it if you can swing it.
- davidcuddeback 3y ago
- jerriep 3y agoI do baking and make confectionary, and I think it is for much the same reason that programmers also like woodworking - the fact that it is something physical that you can touch and feel (and taste, in the case of baking). Then there's the smell as well, which may be relevant for woodworking too.
- felbane 3y agoI have never felt more at peace than when I took a weekend course for hand tool woodworking and spent the better part of an afternoon using hand planes to square and flatten stock in prep for the next day. The sounds and smells melted away everything else.
- hnick 3y agoI appreciate baking since it's very algorithmic. It's typically a lot more precise than general cooking, and I love that about it. Just follow the steps, like my brain has been trained to do, except this time I am the runtime. Don't talk to me about cake decorating or any of that side of things - couldn't care less and will make a mess with a piping bag.
- Jensson 3y agoX is like Y since you work with tools, have to learn things, have to plan things and people have opinions about the results.
- chasd00 3y agoNot sure why youre downvoted. The same article can be written on why software engineers like fishing or anything else.
- nakovet 3y agoI would downvote because the person is being reductive, in such a way that you can destroy most joy in life.
- Jensson 3y agoSaying software engineering is like woodworking is overly reductive in the same way, point is that humans tend to see too many patterns and similarities even though they aren't really more similar than other things.
- aaronbrethorst 3y agoI built a window cornice, a four sided box covered in fabric, and actually just finished installing it a couple hours ago in my toddler's room. His room has southern and western exposure and I've been tearing my hair out trying to figure out how to make it acceptably dark in there for nap time[1]. I have essentially zero experience with woodworking, but I was drawn to it due to the practical effects of being able to solve problems I see in my home in ways that exactly fit my needs, instead of having to go with a 'good enough' off the shelf solution. Building even something as simple as the cornice had a steep learning curve, and I think my wife probably rolled her eyes behind my back more than once when I said I had to go to Home Depot yet again for another thing I hadn't expected I'd need for it, but I'm glad I persevered. The next thing I build will undoubtedly be easier to make, better constructed, and will continue to be the exact right thing I need to solve a problem in my home. [1] The complete answer here is blackout curtains with curtain rods that wrap around, the window cornice, chip bag clips to get an acceptable seal in between the two curtains. It sounds straightforward, but it was a process to get there, as I kept taking half steps that proved ineffectual as the season progressed and the room kept getting more and more sunlight.
- nathantotten 3y agoThe last time I went to Woodcraft, the guy there was raving about the CNC and recommended I get one. Hard pass. Woodworking is my escape from computers. I’m sure if you do woodworking for a living a CNC is amazing, but I’ll take the slow path on this.
- ehnto 3y agoI actually quite enjoy the intersection of computing and woodworking that CNC provides. It's nice to be able to use my skills to make tangible things, but admittedly the CNC also intersects several hobbies I had always wanted to try: woodworking, robotics, electronics and metal machining. There are definitely times where I just want to work with my hands in the workshop but I have plenty to do there too, so a detour to the CNC doesn't feel like it detracts from that.
- SmokeyHamster 3y agoTo an extent, I agree, but it depends on what you're doing. A CNC can get accuracies and scale that's hard to reproduce by hand. Also, a lot of hand tools can be very hard on your joints. Once that slippery layer on your bones between the joints is rubbed down, it never comes back and then you have painful arthritis for the rest of your life, so anything you can do to avoid grinding your hands down, you should do.
- gedy 3y agoCNCs are great if you are doing creative work like carved panels, I'd never have the skill, time, or patience to do work like that. I really love my Shapeoko
- 65 3y agoI loved using my CNC when I had one. Having one is the perfect encapsulation of a programmer: too lazy to doing anything tedious, automate everything.
- jstanley 3y agoI find CNC is very much like programming: I'm too lazy to spend an hour making something by hand, but perfectly enthusiastic to spend a day getting a machine to make it.
- luigi23 3y agoSome of my friends just started getting into it, but their reasons are a bit different. They're moving to new places and saw how pricey furniture can be, so they thought, "Why not make it ourselves?" Plus, it's a nice break from the usual desk job stuff. It's hands-on and feels like you're really making something useful, not just another software project , its all about getting physical.
- ChatGTP 3y agoSoftware Engineer and I absolutely love woodworking, I'm going to rebuild the roof on a barn this year and cover it in solar panels, I'm ridiculously excited about this project. So much so that I secretly don't really want to get back on the computer anymore. I have a feeling a lot of people feel the same and just do it for the money. I love coding personally, but I like being outdoors or in my workshop better.
- dkarras 3y agoI personally don't really enjoy any process that produces a more or less static object. The dynamic nature of the produced artifacts is the allure of software for me, though I get the point of the parallels the author is making. Not saying you can't make dynamic art with woodworking but that is not traditional nor expected.
- __MatrixMan__ 3y agoI was once asked: "Are you a rock climbing mathematician or a cat mathematician?". It was a joke designed to break the ice, but it turns out that 3/5 of that class were climbers, the others were enthusiastic cat owners. No outliers. I'll add software engineering and woodworking to the list. I wonder what other surprising relationships there are out there.
- mauvehaus 3y agoThe reverse holds too: I know more people with PhD's through climbing than any other area of my life that's intuitively nerdier.
- urthor 3y agoBecause it's the complete opposite of being a PhD student I'd imagine.
- mauvehaus 3y agoA good route is a puzzle you solve with your mind and body; I'm not sure it's all that different, except for not having an advisor. N.B. Never aspired to an advanced degree, but I know a lot of people with them.
- aleph_minus_one 3y ago> Because it's the complete opposite of being a PhD student I'd imagine. I'd rather guess the following relationship: IQ is positively correlated with "openness to experience" in the five-factor model: https://en.wikipedia.org/wiki/Big_Five_personality_traits https://en.wikipedia.org/wiki/Big_Five_personality_traits Concerning this particular trait: https://en.wikipedia.org/wiki/Big_Five_personality_traits#Openness_to_experience https://en.wikipedia.org/wiki/Big_Five_personality_traits#Op... "Open [to expererience] people can be perceived as unpredictable or lacking focus, and more likely to engage in risky behaviour or drug-taking. Moreover, individuals with high openness are said to pursue self-actualisation specifically by seeking out intense, euphoric experiences."
- bmitc 3y agoAre software engineers actually driven more often to woodworking? Software engineers aren't a special class of people seeking hobby ideals.
- dboreham 3y agoEarthmoving works too.
- Prcmaker 3y agoWoodworking is one of my many non-technical hobbies, used to switch off from the world. In particular, I will set out to make a 'thing' of non-critical nature, and abandon all measurement equipment. I'll still use a marking gauge without index markings, allowing me to mark a straight line, or a half way point, but that's it. Removing numbers from the process, for me, is a fantastic way to switch from an engineering mindset, to a purely creative one.
- heikkilevanto 3y agoReminds me of a traditional harpsichord builder I heard of. When starting a new instrument, he defines the "inch" for that instrument which is the width of the key. He sets his calibers for that, measures 8 inches for the width of an octave. And so on, everything is done geometrically, like they used to do in the "good old days" before this fixation of numeric methods. His instruments are of very good quality.
- hprotagonist 3y agoSubtractive work gives me job paralysis. Malleable materials are great though.
- cmrdporcupine 3y agoI cannot do "work" without Ctrl-Z and/or git reset --hard
- hprotagonist 3y agopretty much. And as far as woodworking goes, you can’t undo cuts.
- hasmanean 3y ago“Those who work with their minds must rest with their hands.” Japanese woodworkers would spend the first half of the day sharpening their tools. The secret of Japanese woodworking is the steel they used…and their insistence on air dried straight grained softwoods. It helps make their precision joinery possible. It was also a technique designed for longevity so you could remove a piece from a hundreds year old temple, exactly replicate it and put a new one in. No metal fasteners meant no hidden weak spots due to rust which would fail in an earthquake.
- hasmanean 3y agoI sometimes think about how good software quality would be if we all wrote test cases in the morning and coded in the afternoon. Motorola used to have a processes something like this…write and review tests at the same time as requirements are being approved, well before any coding starts. The number of defects we’d find in final system test was very small.
- throwawaaarrgh 3y agoThey did use metal fasteners, just sparingly, because iron was expensive and often of poor quality. Later on even when quality and availability improved, laws were introduced to limit the use of metal fasteners, largely for political and economic reasons. One of the big factors in wood selection in Japan is rot and insect resistance. Japan has very high humidity and buildings were open much of the time, demanding resistance to mold, termites, etc. Another big factor was time. Fast growing species allowed quicker processing, which was helpful considering Japanese buildings have historically not been built to last. Some do last a long time, but most famous Japanese buildings have actually burned down many times, sometimes dozens. Edo (Tokyo) was well known for basically the whole city catching on fire fairly often. They did use hardwoods, too, but where hard wood was necessary or useful, like in certain beams or components that needed hard wearing.
- dang 3y agoRelated: Why software engineers like woodworking - https://news.ycombinator.com/item?id=31687378 https://news.ycombinator.com/item?id=31687378 - June 2022 (247 comments)
- dhab 3y agoI've completed a vocational course in Australia recently on woodworking - enough to land you an intern position at an actual shop. Here's a few comparisons off the top (WW=WoodWorking, Soft=Software Dev/Engr): * WW: must plan well. If you're working on a provided plank of wood, you can't "uncut" if you cut something shorter than should for example, Soft: iterative - and figure things out after some or none initial planning, and easily fix things later * WW: higher risk of fatality/injury, Soft: relatively very low risk. Low liability for artifacts produced - but could serious affect users (e.g. cybersec). * WW: expensive, non-scalable, Soft: scalable, non-expensive (unless u want expensive hardware) * WW: visceral/earthy experience almost always - even on failed pieces, Soft: depends on what you produce * WW: Tangible, Soft: Intangible * WW: Can be repetitive - planing, jointing, routing, Soft: less repetitive * WW: Creative, Soft: Creative
- DustinBrett 3y agoSoftware engineering is my woodworking
- paulcole 3y agoTons of expensive little tools to obsess over and endlessly debate online.
- chrismcb 3y agoI'm sure you can rewrite the headline to "why software engineers like x" there are a lot of software engineers and I'm sure some like woodworking and in sure a lot don't. I find it interesting, but I find a lot of things interesting. I also own a saw and some clamps, but that is about the extent of my woodworking
- adityaathalye 3y agoTime Ewald makes a case for "Programming with Hand Tools" in this talk he gave at Clojure/conj 2013. He too makes a connection with wood working. https://www.youtube.com/watch?v=ShEez0JkOFw https://www.youtube.com/watch?v=ShEez0JkOFw Summary: For most of human history, furniture was built by hand using a small set of simple tools. This approach connects you in a profoundly direct way to the work, your effort to the result. This changed with the rise of machine tools, which made production more efficient but also altered what's made and how we think about making it in in a profound way. This talk explores the effects of automation on our work, which is as relevant to software as it is to furniture, especially now that once again, with Clojure, we are building things using a small set of simple tools.
- arethuza 3y agoI met a guy once who had actually done programming with a hand drill. He was working on an old mainframe that controlled a steel plant and originally this beast booted from paper tape but that had long since been worn away and replaced by a thick leather strap with holes bored in it. He had to modify the boot process so had to get a hand drill out! I heard this around '94 from a guy in his 40s so it probably happened in the 1970s.
- adityaathalye 3y agoThat is such a steampunk image right there; a vast steel behemoth, smoke and steam, an ancient computer, leather and metal. Awesome story!
- fuzztester 3y agoI really miss programming by toggling switches on the front panel of the machine, to set bits in memory words, like they used to do in some of the earliest computers, like in the book Hackers: Heroes of the Computer Revolution, by Stephen Levy ;)
- Jean-Papoulos 3y agoI feel like woodworking is almost an exact opposite of programming. I can run the code to see if it works and it costs me nothing. In woodworking however, "let's cut that off to see how it looks" is not an option most of the time. In general, trial and error is quite limited (notably due to budget and time reasons) in woodworking while the opposite is true in programming and that fundamentally changes the way you work.
- eternityforest 3y agoIn coding the implementation is done by computers, devops, and business people, your job is pretty much like detailed planning, aka writing code. In woodworking the plan is basically trivial compared to how hard the implementation is, and does not exactly define the finished product, because there's made-to-fit steps.
- data-ottawa 3y agoTo me the planning phase of woodworking is a lot like coding. You come up with an overall idea, then break it down into a skeleton and plan what structures you need (do I use pocket holes, or a mortise and tenon?). Once that’s done you fill in the details much like writing your functions and methods.
- erellsworth 3y agoA lot of woodworkers build their projects in something like Sketchup before they even make the first cut, so you can basically see what the end product will look like without wasting any material. I think woodworking is similar to programming because they both involve similar problem solving skills. You have to figure out how to build a thing to serve a use case using the tools and resources you have available.
- globalise83 3y agoIf you are a software engineer interested in trying out woodworking, but don't want to invest in a lot of bulky and expensive machinery, I can heartily recommend balsa glider development as fun and small-scale evening hobby. I learned how to do this in pandemic lockdown, and it is a really relaxing but also intellectually demanding form of woodwork. Basically all you need to start are two large sheets of balsa wood (2mm and 10mm), a box-cutter type knife with a very sharp blade, a cutting mat, hot glue gun with glue, and a box of A3 size laminating sheets as used for laminating paper notices etc. Total cost less than GBP or USD 100, with ongoing costs being only the cost of new balsa sheets, glue sticks and spare blades for the knife. Then you need to learn a bit about aerodynamics, where the centre of gravity of a glide should be, optimal dimensions of wings to body, etc. Then you can start to design and test your own designs, starting with something easy, and graduating up to designs with 1 metre plus wingspans. Last summer I managed to get one of my designs to fly over 150 metres from the top of a 25metre hill. Best part is that if you have a hill nearby, you can spend a nice summer evening flying it until it breaks.
- aivisol 3y agoCan you recommend some resources for glider designs to a beginner?
- globalise83 3y agoHere's a couple of pages that helped me start thinking about it: https://www.faa.gov/sites/faa.gov/files/regulations_policies/handbooks_manuals/aviation/glider_handbook/gfh_ch03.pdf https://www.faa.gov/sites/faa.gov/files/regulations_policies... http://www.ericbrasseur.org/glider_physics.html http://www.ericbrasseur.org/glider_physics.html
- reacharavindh 3y agoIn addition to all the tangible results, the thing that draws me the most to my woodworking time is the lack of abstractions. It is me, lumber and simple application of tools to get the result I imagined. No layers of abstractions to work through - everything is right there in front of your eyes.
- evilhackerdude 3y agoi thought i could enjoy woodworking, but i was wrong. i attended two 1-day woodworking courses: hand tools and machine tools. i made a nice bench/stool thingy that i still enjoy daily. however, every time i work with wood, my mind immediately goes to CAD, 3d printing and wishing i had a CNC. i look at my soft baby hands (i can’t go bouldering for shit) and walk to the keyboard, create a parametric model in a notebook (build123d is great!), slice it and send it off to one of my printers… sigh
- hardlianotion 3y agoI can't help thinking that this title would be improved by adding "some".
- OliveMate 3y agoOne day I'd like to get into wood carving, making little decorative figures and the like, but the lack of space + storage is currently a major roadblock for me. There's a little part of my mind pining (heh) over getting a hobby that's more physical and scratches a technical itch, but unfortunately I don't have an adequate workspace.
- data-ottawa 3y agoYou can buy a simple woodworking kit with one or two knives and some basswood blocks, which all fit inside a cookie tin. To get into it I think I spent ~$100 CAD on knives, a block for honing, a couple books, and a big bag of wood blocks.
- cfn 3y agoI don't know if anyone mentionned it yet, but a big thing is that, while woodworking, you spend most of the time standing up AND moving around.
- TrackerFF 3y agoI build guitars in my spare time. Definitely not a luthier, more a hobbyist mainly because guitar is also my main hobby. I like the woodworking because the results are immediate. Nothing is ever the same, either. Different woods have different properties. Different batches of the same wood can be different. Lots of surprises. No project has ever been smooth sailing from start to finish, so you always learn something new. Making your own tools - jigs, templates, modifying tools, etc. - is a huge part of the process. And there are so many parts to the process...in professional setting, you have workers that only work on small number of tasks, since they're experts on said tasks. But as a hobbyist, you just have to learn a bit of everything. Though some parts can be really tedious (sanding being the worst), it is very rewarding to start seeing results. I absolutely loathe the finishing/painting process, but getting a mirror-like sheen is very rewarding, after spending all that time wet-sanding a surface.
- lkdfjlkdfjlg 3y agoCan't be bothered to go and find it, but this reminded me of another title that I've seen: "why bankers like long distance running".
- Paul_S 3y agoI got into woodworking so I could renovate my house. Ended up building a workshop in my garden and furniture for our house. Can't wait to retire from SWEngineering. Stereotypes reflect statistical reality pretty well - I did bouldering for a long time before I gave up due to fears of injuries (met so many older people there who kept doing it despite acquiring permanent injuries!). Speaking of memes: get Japanese chisels and hand-saws, just trust me on that one, it's a meme for a good reason. A less known Japanese set of tools that is worth getting is measuring tools instead of ones made by woodpeckers - the monster cable of woodworking world. Their average measuring tools are basically the same standard as our premium brands.
- anonymous344 3y agoI'm not good at woodworking, but with fusion360 designing stuff + 3D printing them, aaawwwyeahh! (yes, i am a programmer)
- oliwarner 3y agoFT dev and I've been woodworking for a while. There are plenty of people singing the very real joys of woodworking, but it's not all roses. What I've come to loathe about woodworking is the environment. Endless cleaning and running out of space and needing to find better ways to hide tools yet still be able to find them. And then something goes out of alignment and nothing seems to cut square and you ruin an expensive bit of wood. It's all so permanent. You can't just `rm -rf node_modules`. I'm telling myself I'll enjoy it more if I build a large insulated shop with storage, dust-collection and air filtration designed-in, but I've just been through a house reno and I'd like to just turn a few things on a lathe I've not seen in two years for all the dust.
- RickJWagner 3y agoFor those ready to take the plunge, I'd like to suggest a 'Shopsmith'. It's a multi-purpose machine that can be a drill, lathe, table saw, sanding disk, etc. etc. You reconfigure the machine for the task at hand, using peripheral devices. You can find them on Facebook marketplace for under a thousand dollars.
- poulpy123 3y agoI can somewhat be categorized at software engineer and the only thing that prevent my fingers to be cut by a table saw is that I live in an apartment.
- lostruinsofraku 3y agoI don't know why a lot of software devs like physical hobbies. I had always heard like on HN about people liking woodworking and plumbing, and I was like okay whatever its a meme for the site. Then the mechanical keyboard stuff took off, and that's when I noticed really. The people that like making the keyboards and touching the keycaps are like a separate group of people from the ones that like the layers and keyboard layouts. A lot of the youtube keyboard reviewers are not even really good at typing. And then I would see my friends soldering shit all the time like its fun. I did not try it until 2020 when a lot of stuff was shut down and I had the time. Then I was like oh soldering is just adult legos. I don't like legos at all, that's why I never liked soldering or was really into electronics kits growing up. I feel like peoples hobbies will let you know their preferences for how much abstract thinking they like to do and how they like to process information. Knowing this now, it makes more sense as to why they could not figure out where to put the CS department. I had come across articles before, but I never really understood what they were talking about. 65-70% are like lego people, people who like playing with legos in their spare time. The rest are humanities people who like math, linguistics, English, music etc. You have to try and figure out the type of person who you are getting information from, because people, at least in this industry, tend to think in very particular ways and it is a lot easier to tell when you start looking at their hobbies and preferences for doing things.
- maximus-decimus 3y ago> I feel like peoples hobbies will let you know their preferences for how much abstract thinking they like to do To a point, but I think it's also we do a lot of abstract thinking and want to stretch those other muscles we don't use at work.
- throwawaaarrgh 3y agoCode is a craft, woodwork is a craft. Woodwork is more logical than other crafts, and practical. You can easily spend all your time just futzing with tools without ever getting anything done, or you can churn out easy stuff that isn't interesting. Woodwork is actually a large variety of subcrafts and specialties, so many different people can find something they like about it.