7 ms·
Plug and socket types around the world
- pathartl 3y agoI know type L is not great because it's not polarized, but I think it's the best looking socket out of any of the ones listed.
- nrr 3y agoSomewhat paradoxically, it's actually safer from a consumer safety perspective to assume that you don't have a polarized connector. The big reason is that the consumer can see fit to make modifications to meet their circumstances. If the culture here in the US of filing down the wider blade on polarized plugs so they'll mate with an unpolarized receptacle is anything to go by, people just want to use their stuff, safety be damned.
- pathartl 3y agoOf course. Ideally we'd be able to have all appliances be polarizing agnostic and write that into any standards, and then be able to enforce those standards.
- bluGill 3y agoPolarization is only safer in the case of a screw in light plug (ie light bulb) where the design makes it likely you will touch one of the live wires - if that wire is the one connected to ground you can safely touch it.
- pmyteh 3y agoIt's also helpful when dealing with old hot chassis appliances such as antique radios, where the metal case is wired to what is hopefully neutral but can be at line voltage if the plug or socket is wired in reverse.
- ilyt 3y agoOh you funny man, thinking we have polarized ones! Brits do I think, but most of the eu has unpolarized ones. One of the common 2 socket wall sockets for example have just straight bars connecting 2 sockets being 180 degrees rotated, so each socket have line and neutral on different connector. So if you say put a tester in it, one socket will read "correct" while other will read "L/N reversed"
- slategruen 3y agoSaves a lot of space too. One thing that’s bothered me with most popular socket variants is how wide their power strips usually become. I think the Italian one is the most practical variant that unfortunately isn’t as ubiquitous. It (1) occupies less space, (2) reversible, (3) sticks to the wall more firmly unlike the flat-pronged ones in North America.
- wppick 3y agoInterestingly and semi-related: in Japan, the electrical grid is divided into two frequency standards: 50 Hz in the eastern part of the country (including Tokyo), and 60 Hz in the western part (including Osaka). Which was due to influence by German tech in the east and American tech in the west. Electrical appliances have to be labeled to indicate their compatible frequency to warn customers
- RetroTechie 3y agoOn a side note: anyone know equipment that works on 60 Hz but not 50 Hz, or vice versa? I don't mean what's specified on the label, but actual operation. And ignoring efficiency considerations. Just "works" or not. There's clocks that use AC mains frequency as timebase. Anything else?
- jmwilson 3y agoMotors, wall warts with line-frequency transformers, or other things that are an inductive load. Magnetic materials designed for 60 Hz may saturate at 50 Hz, though usually things designed for 50 Hz will at least sort of work at 60 Hz.
- bluGill 3y agoOther than clocks almost everything is designed for 50 or 60hz. it doesn't cost much more to design for either frequency, and typically you don't care about the RPM difference that much. By handling both you can just sell your things around the world. A lot of money has been lost because someone shipped something to a country it wasn't designed for. Making a motor that can handle different frequencies and voltages tends to be easier than the logistics of getting the right thing to the right place (most of the world is 100-120V, 200-240V, or 400-480V - and those variations are easy to handle if you design for it).
- esturk 3y agoAfter the whole lightning to USB-C plug fiasco for the iPhone, I wonder if the EU will ever throw their weight to force certain smaller countries to adopt more popular socket standards. It might even be done in the name of "reducing e-waste". Just looking over the list above, it seems like Type-J (Swiss & Liechtenstein only) and Type-K (Denmark & Greenland only) are prime candidates. I'm only looking at sockets within the EU border btw.
- Svip 3y agoSwitzerland and Liechtenstein are outside the EU. As for the type K, type F sockets are already permissible in Denmark, and are not uncommon in newer installations. The page on type K mentions that the expectation is that type K will be phased out eventually, as newer installations use type F, but I haven't really seen a lot of type F sockets, and there are no mandates to change existing installations.
- deleted 3y ago[deleted]
- Lukas_Skywalker 3y agoYou need to take Type-J from my cold dead hands. The image shows a quite important safety feature (and misses one): The socket is recessed into the wall, and only the frontmost part of the plug is conducting. That means that while you are plugging it in, there is never any metal exposed. Contact can only be made when the plug is already quite far in the socket. The second feature would be to mount the socket upside down, so the center hole (the ground contact) is on the top. Metal objects falling down on the plug are prevented from making contact with the two current-carrying contacts and usually bounce right off the center contact.
- kevincox 3y ago> Type N [...] 100 – 240 V I was surprised to learn this. My Brazilian friend said you just had to know what outlets in the house where 110 and which were 220. If you got it wrong then the magic smoke came out. Nothing wrong with the socket itself but the use for different voltages is terrifying.
- zzo38computer 3y agoI should expect that they ought to mark each one with the voltage label to know what it is, if they do something like that. (Using a different shape might be even better, to avoid plugging it wrong by accident or if it is dark and the label cannot be read or it is faded and cannot be read, etc, and you can more easily tell which device works with which plug because the shape matches the devices being plugged too.)
- RetroTechie 3y agoNo, that still relies on users not being stupid. Multiple AC standards in 1 building is just dumb, period.
- bluGill 3y agoMultiple AC standards is just fine, so long as all the sockets are physically different so you can't screw up. Electricians are expected to know all the weird rules and get things right, but normal people can't make a mistake so it works. Almost all US houses have two voltages, but since the sockets are obviously incompatible it all works. I've seen industrial buildings that have more than one grid connection (and in one case they paid extra to ensure the grid connections went to different sub stations)
- bluGill 3y agoNot pictured, but the US also has a socket that looks like type B, but it is for 220-240v (mostly used for window air conditioners, or tools). It is not compatible with the normal type A/B socket/plugs though because one of the pins is sideways. I once saw a house in the US which had outlets that would accept either type, and you had to know if it was 120V or 240V. IIRC this was a type A socket, but it would accept either voltage.
- Svip 3y agoType E and F's plug are shown in their combined version (the Schuko), which is the standard today. I have two old appliances (an egg cooker from the 1980s and a sauce machine from the early 1990s), which have the type F and type E plugs, respectively, i.e. not the combined form. Living in Denmark, the usual K to Schuko plug is using the E socket (i.e. "French ground"), which makes it hard for me to find a grounded socket for my egg cooker (which I believe is German). (Though, because this converter takes up a bit of space, on some appliances, I have removed the Schuko plug and replaced it with a type K plug to reduce space required. I have been thinking of doing the same for the egg cooker, but there is something quaint about an actual type F plug.)
- beAbU 3y agoWhat on earth is a sauce machine?
- Svip 3y agoThis thing: https://duckduckgo.com/?q=seb+le+saucier&t=ffab&atb=v101-1&iar=images&iax=images&ia=images https://duckduckgo.com/?q=seb+le+saucier&t=ffab&atb=v101-1&i... Like the egg cooker, this is an inherited appliance.
- beAbU 3y agoYou learn something new every day. Thanks. I was not aware that such a machine exists, or that making sauce is so important in some cultures/places that you have a dedicated machine for it. Thanks for adding value to my day today!
- msy 3y agoOne weird quirk I've discovered is 2-pin Swiss plugs appear to have smaller diamater pins than EU ones, which means some EU-compatiable plugs will not fit in CH sockets. Apple's BRA adaptors work in CH sockets, KOR ones do not.
- tristor 3y agoWhile Type F is clearly (mostly) superior to all alternatives, I wish Type K was the winner in Europe because it looks like a smiley face.
- Svip 3y agoIf you like that, you should see the hospital version: https://www.avxperten.dk/stikkontakt/lk-fuga-stikkontakt-jord-1-5-modul-hvid.asp https://www.avxperten.dk/stikkontakt/lk-fuga-stikkontakt-jor...
- tristor 3y agoOoh, I like that. Winky face is definitely even better than smiley face. Also beats hospital plugs in the US, which are identical visually to other plug types, except for a green dot.
- jeltz 3y agoPersonally I prefer type E despite growing up in a country with type F. They are less prone to being annoying when build quality is poor.
- Cockbrand 3y agoFans of the Scream movie franchise may prefer Type I.
- nikau 3y agoType I is probably the best socket, cheap to manufacture, polarized, doesn't become lose like us type sockets.
- ilyt 3y agoI actually prefer E coz I can just connect to ground via alligator clip if I need to
- sq_ 3y agoWhile traveling in Europe recently, I noticed that my adapter from the US plug to the European one didn’t always quite fit into the sockets. I wonder now if I was seeing some small incompatibility between Type E and F…
- dvh 3y agoThis is one of the reasons aliens still didn't land here.
- gizajob 3y ago“The good thing about standards is that there are so many to choose from.” I’ll never get bored of posting this nugget
- bloopernova 3y agoI know people make fun of the UK plug for being too chunky, but I really like its solidity. It feels like it will actually survive a few years in a home. Plus assembling them at school was always fun.
- RetroTechie 3y agoAnd supporting a fuse in the plug! Not to everyone's liking, but there's something to be said for that.
- mixmastamyk 3y agoOk at home... for a fridge? But traveling with them is another story.
- pm215 3y agoThe one on this list that surprised me is type O, because it's specific to Thailand and only standardised in 2006, which means that in the 21st century somebody decided it was better to invent a completely new plug-and-socket spec, rather than adopting any of the pre-existing standards...
- ilyt 3y agoGovernments be like that
- N19PEDL2 3y agoMoreover, the type F plug easily fits into a type O socket, but without ground and contact insulation. It is a big risk if they import appliances with type F plugs, or if, for example, European tourists visit Thailand bringing their own electrical devices. I wonder why Thailand didn't just adopt type F like the neighboring countries.
- jeltz 3y agoF (and E) has partial and unsafe compatibility with G that they fail to mention. I have seen people use that way too often in Malta.
- Macha 3y agoHmm, I wonder if this is the sometimes differing E/F pin size mentioned in this thread. In Ireland we use type G but poorly informed manufacturers sometimes ship devices with europlugs. I couldn't fit them into my type G sockets without physically deforming the socket as the diameter of the round E/F pins are larger than the smaller dimension on the type G pins. (Now granted, some cheaper sockets, particularly on extension leads, you could deform the cheap plastic enough by just ramming it in there..)
- nonethewiser 3y agoI noticed Japan was only associated with one plug (type A). Does this mean they don’t have a grounded plug? Or just an omission?
- mixmastamyk 3y agoYes, no grounded plug that I've seen. Trying to find an adapter to plug your grounded power supply in is a challenge.
- hexmiles 3y agoIn another table they also mention type B that has a grounded plug: https://www.worldstandards.eu/electricity/plug-voltage-by-country/ https://www.worldstandards.eu/electricity/plug-voltage-by-co... https://www.worldstandards.eu/electricity/plugs-and-sockets/ab/ https://www.worldstandards.eu/electricity/plugs-and-sockets/...
- slategruen 3y agoBecause “double insulation” is much more common here and is deemed sufficient enough. A/Cs and fridges are usually the only appliances which needs a ground connection. For those, we have sockets that has a hidden screw-in ground tap. I can still find unsafe/bothersome exceptions though. For example, a lot of rice cookers doesn’t really seem to be “double insulated” but they still have two-pronged plugs. Another is custom-built PCs. You basically need to strategically place your PC near a socket which you usually use for your A/C just to have that ground connection.
- Gabrys1 3y agoNote: type E looks like it could be polarized, but it's not. It's also annoying to use when you have a big plug as it often blocks two outlets.
- dfox 3y agoThe solution for right-angle plugs blocking adjacent sockets are angled sockets. For a correctly designed appliance the polarization should not matter and as today most appliances have CEE E/F plugs which are compatible with inherently not polarized Schuko there is not much space for designing it wrong. Across the EU there is a bunch of various normative and ad-hoc standards about which pin should be the live one in Type E socket. And well, one would expect that there are only three ways how that can be standardized including don't care, but no, there also exist standards that say “always on left, even if the socket is upside down” (the reasoning is something along the lines that if a child sticks a 100mm nail into the socket it is going to be into the right hole)
- MeteorMarc 3y agoNow I become curious how many types of converter plugs between type A-O do actually exist!
- MenhirMike 3y agoMoving from Europe to the US really made me appreciate recessed power sockets - the standard US Power Socket is a crime against engineering (and don't get me started on 120 vs 240V). If I was Emperor of the Universe, I'd make the Type G plug the only standard: Longer ground contact that makes contact first, plastic cover on the plug-facing side of the hot/neutral contacts, polarized because there's only one direction to plug it, built-in fuse. Make it recessed, and it's perfect. And since it's rated for 250V/13A, it's great for any household device that doesn't need three-phase power. Yes, it's chonky, but the more I learn about power plugs and sockets, the more I see how well designed it is. Unless someone from the UK knows if there are actual issues with it :)
- rndmio 3y agoThe biggest issue with the UK plug is when it’s been left unplugged, lying pin up, in the dark. It’s got to be the most painful one to stand on.
- stevekemp 3y agoIt is true they can sting a little, but that aside I have a strong preference for them too - almost certainly because i grew up with them! There's the obligatory Tom Scott video here, which always gets shared, deservedly so, whenever the topic of plugs and sockets comes up: https://www.youtube.com/watch?v=UEfP1OKKz_Q https://www.youtube.com/watch?v=UEfP1OKKz_Q
- ilyt 3y agoThe man haven't seen good plug in his life
- andyjohnson0 3y agoCan confirm. 2.4 times worse than lego.
- gottorf 3y ago> the standard US Power Socket is a crime against engineering (and don't get me started on 120 vs 240V) What's so bad about a NEMA 5-15? I grant you it's not as fancy as the Type G, but I've certainly never been shocked by it, so I'm not sure if it's criminal. US households have access to 240V if they want it (and most homes have at least a clothes dryer outlet wired for this). About the only thing I would really prefer to have 240V for is an electric kettle.
- gizajob 3y agoBest - Type G Worst - Type I
- perilunar 3y agoI live in AU and use type I all the time. It's fine. Easy to tell orientation by feel. All of them apart from A/B, G, and I are way too similar. Must be confusing for travellers.
- gizajob 3y agoI was just throwing a bit of shade as a British person in Australia! I’ve had some frustrating experiences trying to rewire Aussie plugs - they’re a total headache compared to ez-as chunky British ones. I find the prongs bend too easily on Aussie plugs too.
- mixmastamyk 3y agoWhat about DC plugs for the home? Maybe the kitchen appliances are the last that use AC natively?
- bluGill 3y agoAC is strictly better for home use. You can just throw a transformer at AC and you get a different voltage, and then a couple diodes and capacitors give you the DC voltage you want. DC is more complex (generally you turn DC into AC and throw it into a transformer then back to DC - the only advantage of DC is you can turn it into high frequency AC which allows for a tiny transformer). Most things that want DC want very low voltage DC, which doesn't travel long distances well, and there are a number of different DC voltages things that want DC might want.
- ianburrell 3y agoI got the impression there is one place for medium voltage DC in the home. Solar panels have inverters to make AC from DC, and batteries also need to convert DC to AC. It would be more efficient if the solar panels and batteries were connected directly with DC, and if there was a single, efficient inverter. It makes the most sense to use the battery DC voltage, and then solar panels have variable DC converter. It would make sense for off-grid home to distribute DC. DC appliances could be more efficient but they don't exist. Everyone will use inverter and AC wiring.
- danielhep 3y agoAlmost all DC power supplies are switching power supplies these days, which convert AC to DC first, then use DC-DC converters to get to the final voltage. I would think AC transformers are quite rare in homes these days. Maybeeee some microwaves? But the majority of power consumption is happening after rectifiers. Edit: another thought, most chargers and other low power DC power supplies will actually work just fine if you feed them sufficiently high voltage DC rather than AC. The recifier just doesn't do anything! I used to power my laptop charger directly from a lithium battery at about 100 volts DC with no trouble.
- mixmastamyk 3y ago
- LinAGKar 3y agoI'm guessing you read XKCD?
- Titan2189 3y agoWho made this list of just naming them A - O? Why not use the established standard names? Probably a case of https://xkcd.com/927/ https://xkcd.com/927/
- zdimension 3y agoThe lettered naming convention is common and not new ([see](https://en.wikipedia.org/wiki/AC_power_plugs_and_sockets#Types_in_present_use https://en.wikipedia.org/wiki/AC_power_plugs_and_sockets#Typ...)) In France, Switzerland and Germany I've heard the terms "type C/E/F" (sometimes "Schuko"), but never CEE 7/3 or CEE 7/7.
- lmpdev 3y agoAn underappreciated one is Type I Extremely safe and easy to produce and it's finally getting properly adopted by China It can actually take 230V at 32A but these are extremely rare and have a modified keyed ground pin But tbh the biggest benefit across the world would be seeing the US and Japan getting rid of its ~115VAC infrastructure and adopting a safer and more efficient grid standard. The wasted heat alone on the collective sum of all their cables is mind boggling
- RoyalHenOil 3y agoWhat I don't like about the I standard is that the plug can become loose from the socket if there is downward force on the cord. I would strongly prefer it if the socket were recessed. The plug is also very large and round, which makes it hard to run cords through narrow gaps.
- _djo_ 3y agoType N is actually the only one of these that's a global standard, IEC 60906-1. That's the reason why South Africa adopted it when deciding what to use as a replacement for Type M. There was a bit of a push some years ago to encourage countries to adopt IEC 60906-1 but there's obviously huge inertia against that sort of move.
- voxadam 3y agoI wish NEMA 6[0] receptacles and plugs were more common in North American, especially in the kitchen. I would love to have access to 240 V for counter top appliances like my electric kettle and toaster oven. A single receptacle compatible with both 120 and 240 volt plugs would be even better. [0] https://en.wikipedia.org/wiki/NEMA_connector#NEMA_6 https://en.wikipedia.org/wiki/NEMA_connector#NEMA_6
- Kirby64 3y agoThere are single receptacles capable of both 120 and 240V. They're called NEMA 14. NEMA 14-20 technically exists, which would give you multi use 120V or 240V 20 amp outlets. The problem is nobody uses them, as this is non-standard and nothing uses the plug besides industrial stuff. Unless there's a truly useful application, I doubt it'll see wide use in US. Sure, 240V is nice, but there just isn't that magic thing missing from 1800W appliances today. Being able to boil water a little bit faster is not worth rewiring every house and changing standards around the country.
- perilunar 3y agoCylindrical plugs are the best plugs. It's a pity there isn't a mains AC cylindrical plug and socket, like the low-voltage DC barrel connectors [0]. You never have to think about the orientation; they're always the right way up. 0. https://en.wikipedia.org/wiki/Coaxial_power_connector https://en.wikipedia.org/wiki/Coaxial_power_connector
- TT-392 3y agoI kinda hate how in europe (or in the netherlands at least) there are non-grounded outlets that fit grounded plugs, and grounded outlets that don't fit non-grounded plugs. Ideally, grounded outlets would all be type F. And non-grounded outlets should be the compact, recessed type-c in which you can't fit a grounded plug. Though, I think they are very slowly moving to just making everything a grounded type F outlet.
- N19PEDL2 3y agoI'm not getting the reason for having type N (which was standardized quite recently). It's somewhere in between type L, where the ground pin is aligned with the two other pins, and the type J, where the offset between the ground pin and the line between the two other pins is larger.