12 ms·
80/20 Aluminum T-slot Building Systems – Build your Idea
- strken 4y agoI've been looking at aluminium extrusion videos on youtube for the past half-hour trying to work out how the dies have a circular void in the middle. Turns out it's a second die (called a mandrel) that locks into the main die (called a cap), and the hot pressurised aluminium flows around the mandrel then forms back into one piece as it goes through the cap.
- MengerSponge 4y agoIt's the same as pasta, but with different temperatures and tolerances!
- iancmceachern 4y agoThe coolest part (pun intended) is how they cool the semi-melted aluminum after extrusion, in long tanks of water, that have no sides, the sides are made from water pressure made from directing water flow.
- engineer_22 4y agoPlease provide a link, this sounds insane
- iancmceachern 4y agoThis is the best I could find quickly: https://m.alibaba.com/product/1600594223702/Quench-Cooling-Tank-For-Aluminium-Extrusion.html https://m.alibaba.com/product/1600594223702/Quench-Cooling-T...
- raisedbyninjas 4y agoSame as the play-dough tube extruder.
- sacrosancty 4y ago[dead]
- rco8786 4y agoAnybody into sim racing will be intimately familiar with this system. Very strong, very versatile.
- philjohn 4y agoCame here to say the same thing. So many pre-made kits using it, and plenty of people who DIY a sim racing cockpit with it. SimRacingGarage has reviewed some 6DOF rigs which use 8020 at their core.
- pitched 4y agoThe reason I haven’t used these for a few past projects is that they can’t quite hold up under human-scale weights (1). Would be awesome to have something like this but steel! 1: https://us.misumi-ec.com/pdf/fa/2010/p2433.pdf https://us.misumi-ec.com/pdf/fa/2010/p2433.pdf
- MengerSponge 4y agoI've used all kinds of 8020 frames for things much larger and heavier than humans. You just have to use larger cross-section members: https://www.facebook.com/229125947114533/photos/pb.100063454666849.-2207520000./2386016401425466/?type=3 https://www.facebook.com/229125947114533/photos/pb.100063454...
- pitched 4y agoThat’s what the chart I linked says. To stand on a 1m length suspended on both ends, a 2060 might work but a 2080 should be safe. That’s just a bit smaller than a much cheaper wooden 1x4 though.
- toss1 4y agoI've used 80/20 for a number of projrcts, but for a larger project I found this steel square/rectangular tube system from Flex Craft works well. No relation other than satisfied customer. The people are also great to work with. [0] flex-craft.com
- kris_wayton 4y agoThe chart doesn't seem to account for the profiles that only have a slot on 1 or 2 sides versus all 4. I would guess those are quite a bit stronger. Like this one: https://8020.net/media/catalog/product/cache/9208ae76a38c408ac391cef6ce87b454/2/5/25-2504_dimensional_1.png https://8020.net/media/catalog/product/cache/9208ae76a38c408... Edit: Their calculator shows the same exact deflection with the same weight, so maybe not, though that seems odd to me. https://8020.net/deflection-calculator https://8020.net/deflection-calculator
- johnwalkr 4y ago
- viciousvoxel 4y agoGreat to have another T-slot build system. Seems slightly pricier than Makerbeam but a lot more profile sizes and options in general. I wish there were more kits in their catalog.
- 542458 4y ago80/20 has been around since the late 80s, and are kinda the “classic” brand-name in aluminum extrusions. Popular for trade shows and the like. They tend to be on the more expensive side compared to Misumi or other brands, but you can sometimes find them cheap used on Craigslist.
- kris_wayton 4y agoThere's a US anti-dumping embargo on extruded aluminum, which seems to keep the price high.
- neilv 4y agoOne of my startups used 80/20 successfully for the mechanical structure of our networked factory stations (along with industrial PC and sensors). Designed, tested, refined&tuned, and built in Cambridge (USA). Then broken down simply, to fit in a few pieces in boxes for flight, and reassembled at the factory in Asia.
- chiefalchemist 4y agoIntriguing. But the concept is new to me, and I found the site not very n00b friendly. My initial questions are: Can I use it to build a greenhouse? And how much would that cost? I couldn't find anything comparable, and left.
- tinco 4y agoYou could but it would be extremely expensive, and not as strong as a steel construction. If you are building a robot that tends to the plants in your greenhouse however, this is a great material to both build the skeleton of the robot, and the structure that holds your plants. It allows you to quickly prototype in a very precise and lightweight manner.
- chiefalchemist 4y agoThanks. Still intriguing, but now for other ideas / projects. I wish the site was more transparent on their sweet spot.
- sgc 4y agoThe sweet spot for extrusions is usually convenient precision. If you don't need relatively high precision and accuracy, they are often overkill.
- chiefalchemist 4y agoWell, it's a cool tech-y look as well.
- himinlomax 4y agoSimple square aluminium tubing would be cheaper and with similar characteristics for this application. You can assemble them quite easily with a drill and bolts/nuts/washers of the appropriate size. The advantage these profiles have is that they are more precise, are more easily adjusted and allow for a wide range of connections.
- rjohann 4y agoI call it lego for the industry. Many 3d printer frames are made of it. Sim racing rigs are made of it.
- elteto 4y agoI call it legos for adults, with the price tag and everything ;)
- sschueller 4y agoI would argue that LEGO is more expensive, way more expensive.
- leobg 4y agoSo what would be a LEGO for adults without the price tag?
- 111111101101 4y agoPVC pipes and fittings.
- blep_ 4y agoPVC fittings are weirdly expensive, considering how cheap the pipes themselves are.
- BizarroLand 4y agoIt's probably because the manufacturing process is more complicated. I bet the pipe is practically continuously extruded from a machine but the fittings also have to be processed and bent into shape before they harden.
- 111111101101 4y agoI thought it was an Australia thing but yes, $1.50 pipes and $3 fittings are the norm here too. Fortunately, you can 3d print fittings which opens up all sorts of possibilities that don't really make sense for use in plumbing. https://www.thingiverse.com/thing:2956356 https://www.thingiverse.com/thing:2956356
- Quequau 4y agoI wonder how much outfits like Send Cut Send are eating into 80/20's market share. I know I've used laser cut sheet stock for a few projects that probably would have used aluminium extrusions in the past.
- doctorwho42 4y agoProbably not as much as Chinese extrusions have. You can find some pretty cheap and compatible aluminum extrusion on the internet these days. Ebay used to be the best, but now there are dedicated websites and everything. Extrusions have never been cheaper
- fbnlsr 4y agoAre you sure? I've been looking at getting myself a sim racing rig made of aluminium extrusion and prices have skyrocketed in the past couple of years. I'd love to get some links on those cheaper extrusion websites you're talking about.
- ama5322 4y agoI doubt much if we think decades. Sheet stock has always been used in conjunction to modular systems such as these, via manual or CNC machining (slots and holes are trivial to do). The advantage of a modular system such as these is the ability to build a scaffold with only straight cuts and a few off-the-shelf connectors. In most cases you need a sheet metal press to form a scaffold out of _just_ sheet metal. For anything structural (ie: when thickness matters), the price of custom-cut sheet stock is not that competitive anymore. The price of machine-cut metal sheet has dropped quite a bit the last years though. I think it's filling a new niche, not really replacing the space of modular extrusions.
- sschueller 4y agoThese types of aluminum extrusions have been used for many years (at least in Europe) in many industries to build all kinds temporary to more permanent structures [1]. Also the reason they ended up in 3d printers as they have been used in other CNC type setups. Oddly enough the Wikipedia article is very thing and not even available in English [2] [1] https://www.kanya.com/fileadmin/_processed_/3/1/csm_kanya-ag-loesungen-aluprofile_2c7e1205c0.jpg https://www.kanya.com/fileadmin/_processed_/3/1/csm_kanya-ag... [2] https://de.wikipedia.org/wiki/Konstruktionsprofil https://de.wikipedia.org/wiki/Konstruktionsprofil (German)
- phasetransition 4y agoIf 80/20 is new to you, then you might also be unfamiliar with its steel channeled cousin, Unistrut. https://www.unistrut.us/ https://www.unistrut.us/ Unistrut is used extensively in the US to build support structures for electrical switchgear and process equipment. You can get grades suitable for outdoor and corrosives exposure. Unistrut is the Kleenex term, there are a number of work-alike / fit-alike systems. Then for round tube, there is Kee Klamp: https://keesystems.com/ https://keesystems.com/
- zeroping 4y agoGood to keep alternatives in mind. I have found unistrut significantly cheaper when you want to build larger scale or stronger stuff. It's not super versatile, but can still do a lot.
- phasetransition 4y agoI've used Unistrut and adjacent (flex-craft) more than 80/20. They all have good use cases.
- rambambram 4y agoI love the Kee Klamp system (or just 'steigerbuis' as we call it here in NL). I built furniture with it in the past, and also a bicycle caravan (https://www.theredpanther.org https://www.theredpanther.org).
- sitkack 4y agoIf you have a hood welding hood with forced air, EMT is fairly easy to weld with a gas shielded MIG welder. Makes very rigid structures.
- alanbernstein 4y agoFor lighter duty, there is maker pipe: https://makerpipe.com/ https://makerpipe.com/. it's nice because the bulk of the system is electrical conduit, which I think is one of the cheapest type of beam/tube available.
- iancmceachern 4y agoAlso check out Misumi. They will cut it to length, tap, drill holes, etc all just by configuring it woth part numbers. They Lso have pre made assemblies, you can get it in black anodized, and the pricing can't be beat, it's an order of magnitude less than other suppliers when you get the customizations. Also check out Vention, they'll design and build a whole machine for you using the stuff
- lvl102 4y agoMisumi is the only answer if you are building something with precision. Also checkout accu.co.uk.
- joshvm 4y agoAccu are fantastic. They also have European sites and maybe more? Always my goto if we need weird screws and they will also make to order if you need something special. Edit : I would guess McMaster fills this role in the US, so it's nice to have an alternative here. Also they have a lot of non-standard lengths and things like tiny M2s or even smaller. We used them all the time for machine vision products (cameras often use M2 frame mounts, lenses with itty bitty grub screws).
- willis936 4y agoA coworker of mine told me about Misumi last week. They're pretty amazing and the prices are surprisingly great.
- joshvm 4y agoThey're pretty common in the 3D print industry. Also check out IGUS, who also do a lot of custom rails/rods. They're probably most well known for their plastic Drylin bearings. The prices are also reasonable for what you can get. I've been meaning to get some stuff from Makerbeam too, who make 10x10 mm extrusion at a good price (not sure who else makes small width stuff). Oozenest in the UK has a good range.
- sircastor 4y ago
- furazoball 4y agoMore modern equivalent to 8020 - https://vention.io https://vention.io - really great way to get started developing an idea!
- mhb 4y agoWhat does more modern mean?
- waste_monk 4y agoMore modern = the same thing as existing products but the surface is anodised blue, by the look of it.
- sgt 4y agoI recently used aluminium extrusions to build a window. Built a "perfect" frame, stuffed glazing putty into the spaces, then fit a glass in, which I had cut to size. Needed a DIY job as it was just for my garden house. There's more to a proper window than just the glass and frame.
- 14 4y agoLast I checked it was hard or expensive after shipping and duty to get this stuff. I am on Vancouver Island and would love to get some of this stuff. Made me even consider starting a business selling it.
- elkos 4y agoThere's a 80/20 DIY Azimuth/Elevation rotator design by the SatNOGS team: https://wiki.satnogs.org/SatNOGS_Rotator_v3 https://wiki.satnogs.org/SatNOGS_Rotator_v3 If you have access to a 3D printer and want to build a Az/El rotator suitable for LEO satellites it could be a great weekend project. (You don't have to connect it to the SatNOGS network https://network.satnogs.org https://network.satnogs.org of course, and you don't need to build that to participate in the project)
- maineiac 4y agoSigned back in for the first time in... years... to add that a lot of DIY van / overlander builders are using this stuff! I opted for the cheaper but almost-as-good TNutz.com manufacturer for my build. Slightly different alloy but totally valid for my needs. If you're considering building a van, check out Seven-O-Savage on youtube: How to build a van with 80/20 https://www.youtube.com/watch?v=XqiroMdqZ0Y https://www.youtube.com/watch?v=XqiroMdqZ0Y
- harryvederci 4y agoPuts wooden chair in house. How to build a wooden house!
- jorts 4y agoSo weird I for the first time ever was looking at 80/20 for overlanding and this ends up on HN.
- maineiac 4y agoWhat's your project gonna look like?!
- am_lu 4y agoFor small stuff there is also makerbeam, 10x10mm sized, uses M3 fasteners. https://www.makerbeam.com https://www.makerbeam.com
- techdragon 4y agoUnfortunately it’s prohibitively expensive for larger “intricate” work projects. Otherwise it’s good stuff. Just a little more expensive than I’d like per linear meter.
- deleted 4y ago[deleted]
- js2 4y agoAs an example of how you can use this stuff, here's a home-theater screen frame with built-in horizontal masking, and plans on how it could be extended to 4-way masking: https://www.avsforum.com/threads/smx-simple-masking-experience-screen-build-recipe.3128652/ https://www.avsforum.com/threads/smx-simple-masking-experien...
- post_break 4y agoTry tnutz.com. I found them much cheaper for building stuff. They cut it for you as well. Had to build some stuff for my truck and they were the cheapest.
- hsnewman 4y agoThanks! I'm going to build a bike cart and although Wize has a kit, I would rather use my design, this info will help greatly!
- shlubbert 4y agoLove these guys and used them multiple times to build small structures. McMaster-Carr (obviously) also has a ton of handy connectors and fasteners: https://www.mcmaster.com/t-slotted-framing/ https://www.mcmaster.com/t-slotted-framing/
- tguvot 4y agoSpent last couple of weeks browsing this site and other 80/20 sites. There is an online cad program specially made for 80/20 https://item.engineering/AUen/tools/engineeringtool/ https://item.engineering/AUen/tools/engineeringtool/ . And some guy who makes woodworking jigs from extruded aluminum https://www.youtube.com/@jisakukobo/videos https://www.youtube.com/@jisakukobo/videos
- andrewdubinsky 4y agoIs this just an ad?
- ur-whale 4y agoI you're close to the EU, I recommend these guys: https://www.motedis.com/en https://www.motedis.com/en They'll pre-cut everything you need and send it to you. If you're into aluminum extrusions, here's a sample: https://www.motedis.com/en/Slot-profiles https://www.motedis.com/en/Slot-profiles
- techdragon 4y agoWith all the recommendations flying around, I’d like to seek the collective wisdom’s advice, as I’ve been looking for suppliers anywhere in the world that make these kinds of metal construction framing systems that either make locally in my country or state, or have low bulk shipping to it. I’ve been trying for ages to find a way to avoid the significant markup to ship these sorts of heavy metal items to Western Australia. I’ve even been keepin regular tabs on local metal extruders and the few theatres have extruders in state are pretty much entirely making things for the housing/building construction industry and a couple of standard garden/industry forms like tube triangle, square, star picket, etc… Anyone got advice on good suppliers local or global? I’m happy waiting a month or three for stuff to arrive from anywhere on the globe if it means I don’t spend 15-25% on shipping.
- DoingIsLearning 4y agoWhen I was a teenager I used to improvise prototypes at home with those generic Meccano sets (small prototypes where the stifness of extrusion frames wasn't needed). Is there any modern equivalent? If I look for Meccano nowadays it seems to have gone the way of Lego, where you only have prescribed construction sets, haven't found generic parts sets. Is there any modern equivalent of Meccano for such an application?
- shagie 4y agoAre you looking for https://www.fischertechnik.de/en/ https://www.fischertechnik.de/en/ Things like https://www.amazon.com/fischertechnik-Creative-Box-Basic-Plus/dp/B08523F7Y4/ref=sr_1_4 https://www.amazon.com/fischertechnik-Creative-Box-Basic-Plu... And while many of the kits are "you can build this"... the interesting stuff is at https://www.fischertechnik.de/en/simulating https://www.fischertechnik.de/en/simulating - things like Training Factory Industry 4.0 24V with PLC connection board https://www.fischertechnik.de/en/products/simulating/training-models/560841-training-factory-industry-4-0-24v-with-plc-connection-board https://www.fischertechnik.de/en/products/simulating/trainin...
- p_l 4y agoLooks interesting, but uses way more I/O than I expected :O
- sircastor 4y agoI have piles (4 boxes!) of Fischer Technik in my garage that belonged to my father. He always loved it as a prototyping toy, and thought it to be a much better system than LEGO - which it probably was for construction, but not for kids randomly playing with stuff. I'm not really sure what to do with it all these days...
- shagie 4y agoMake your own rail guided marble run and use it as the skeleton. And while they do make their own ( https://www.fischertechnik.de/en/products/playing/profi-dynamic-marble-runs https://www.fischertechnik.de/en/products/playing/profi-dyna... ) you could use it as the structure behind https://youtu.be/kPguktA674w https://youtu.be/kPguktA674w I'll also suggest a "random stuff behind you" for video calls. Rube Goldberg machines.
- jbay808 4y agoIn Japanese hardware stores last year I spotted a new type of aluminum extrusion called "G-fun" by the "SUS" company, which is vastly superior in terms of rigidity and interconnection options: https://g-fun.jp/ https://g-fun.jp/ However, I can't find it anywhere in North America.
- jbay808 4y ago(Addendum: If you're wondering what makes it more rigid than traditional X-shape extrusions, it's partly because the joints are well designed, but mostly because the torsional rigidity of a thin-walled section is proportional to the square of the enclosed loop area): https://ocw.mit.edu/courses/16-20-structural-mechanics-fall-2002/d01996bd6822461f4dcbdc3fbf2ea16f_unit12.pdf https://ocw.mit.edu/courses/16-20-structural-mechanics-fall-...
- joshe 4y agoThis might be the US version: https://leanfactoryamerica.com/brand/green-frame/ https://leanfactoryamerica.com/brand/green-frame/ The site mentioned "green frame" and googling found this, seems to be a licensor, since they have a brochure with "SUS" on it. Looks cool, thanks for mentioning it.
- nl 4y agoThis looks amazing. The range of connectors is fantastic too. I wish I could read Japanese instead of clicking random things though.
- numpad0 4y agoThat cross section looks like an …
- chendii 4y agoThe popular open source option is www.openbuildspartstore.com Availible via many resellers worldwide and even cloned.
- sitkack 4y agoThe extrusion profile is Open Source, so not clones.
- londons_explore 4y agoI want this, but I don't want to pay much more than the raw aluminium cost. The cost of pushing aluminium through an extrusion die is nearly zero. The die cost isn't much anymore in the world of cheap CNC machining. And the R&D costs for coming up with the shape shouldn't be high (and already paid off years ago). So why is that stuff still so expensive??
- jvanderbot 4y agoDemand. It's ubiquitous. I've seen it in every prototype or mockup or early version of every larger-than-a-breadbox system I've worked on. It's used for lighting, sound systems, camera mounts, even shelving in some cases. Whenever two or more engineers get together to design something, 80/20 is there in spirit at least.
- simontheowl 4y agoBy that logic, the lego sets we buy for our kids should also be the cost of plastic ;)
- DoingIsLearning 4y ago> So why is that stuff still so expensive?? Bosch Rexroth. Bosch's extrusion profiles are what people at big co's who need stiffness and don't care about price tag will buy. My guess is that Bosch warps the whole market up and the competion follows.
- acyou 4y agoYou used to be able to buy a basic extrusion die in China for $500 and off to the races at $0.80/lbs extrusion cost with 500kg MOQ. Wonder if there's patent protection on the US sale of that profile? You still have to cut it, ship it, distribute it, sell it. If you were buying 500 kg, you too could probably find a way to get it cheaply made. As a counterexample, I will say: The cost of typing characters on a keyboard is nearly zero. So why is software still so expensive??
- londons_explore 4y agoRemember it isn't quite a basic extrusion die because it has a hollow in the middle. I assume that at least requires some fancy 3d shape.
- hinkley 4y agoThere’s a guy on YouTube who makes conversion vans using this stuff. He has figured out a bunch of tricks with it, but the one thing I feel like he hasn’t figured out is that he’s losing a cubic foot per cabinet by not exploiting the void behind the posts.
- IshKebab 4y agoThe best place I've found in the UK to get aluminium extrusion is KJN aluminium: https://www.aluminium-profile.co.uk/ https://www.aluminium-profile.co.uk/ They do Item and Bosch-Rexroth compatible extrusions for a reasonable price. I'd probably go with Item because the official BR stuff is a rip off and sooner or later you might want to buy "official" parts.
- steaktartaar_ 4y agoI've been building out my sim racing setup with 8020 for the past three years. It's a goodsend if you want to build something durable, fast and cheap but can't work wood.
- LightRailTycoon 4y agoIf you live near a Grainger or other industry supplier that will sell to the public, it’s much cheaper without shipping.
- s1mon 4y agoIf you need to build a CAD model of 8020 frames, Onshape is a collaborative, cloud based system which is a bit like Google docs and Github for mechanical CAD. There's a bunch of tools to create frame systems and they have the 8020 frame profiles built in. https://www.onshape.com/en/features/frames https://www.onshape.com/en/features/frames https://www.onshape.com/en/blog/announcing-onshape-frames https://www.onshape.com/en/blog/announcing-onshape-frames
- sam_goody 4y agoThe wooden GridBeam system was trending a few hours ago, and I assume it reminded someone to post this. But if you missed it, and these things interest you, check that out as well: https://news.ycombinator.com/item?id=34565675 https://news.ycombinator.com/item?id=34565675
- gambiting 4y agoAh, so that's what these are called! My 3D printer(ender 5) is made out of these and I could never find the name of those metal bars!
- mgarfias 4y agoDo what I did: buy a Multiprocess welder
- antoniuschan99 4y agoThere’s also 2020 which are thinner. I used those to build an aluminum enclosure and also as a frame for a 2-axis machine. https://www.instagram.com/stories/highlights/18226753087124117/ https://www.instagram.com/stories/highlights/182267530871241...
- aetherspawn 4y agoDon't ... tempt me. I'm looking for a soft ute canopy (i.e. canvas) that is both strong enough to put ladder racks on top, but lightweight and easy enough to remove. Surprisingly, there are not too many options. Those that are available in Australia for my ute (ISUZU D-MAX), have really low load limits i.e. only 40kgs or so. I think 80/20 could be a good solution, if I was better with my hands. There seem to be quite a few options for locks and quick releases. Would make it very easy to add shelves and sliders.
- dirtyid 4y agoThere needs to be an industrial meccano simulator game to mess around with all these systems, along with bamboo scaffolding.
- anonymous344 4y agoWould love to see something like this in europe (uk not included because of customs) the induvidual beams that is available costs more than 30eur/meter so impossible to diy anything with low budget
- moffkalast 4y agoYeah same, I've tried finding them in local stores a long while ago and all of them basically looked at me like I'm asking for a moon rock or something.
- bitschubser_ 4y agowhere do you live? At least here in germany there are some sites selling B- and I- Type (Bosch/Item) compatible aluminium profiles for ~15eur/m with custom lengths (the heavy duty B-Type 45x45) I personally build most of the stuff out of these profiles, easy, sturdy and reusable
- supermatt 4y agoWhat are the options for similar supplier in the EU?
- supermatt 4y agoim answering my own question here, but it seems https://uk.misumi-ec.com/ https://uk.misumi-ec.com/ is one of the more competitive options
- JRandomHacker42 4y agoI've used 8020 to custom-fab my Perfect Monitor Stand: it holds either three widescreen or two ultra-wide displays, has two attachment points to the desk, and has the minimum possible depth to keep the monitors as far as possible towards the back of the desk. It wasn't cheap, but it's solved basically all of my monitor layout issues.
- Martinlouiss 4y ago[dead]