13 ms·
Ploopy: open hardware trackballs and mouse
- ruined 5y agooh, perfect. the nano trackball looks like just the thing to fit between my ergodox. i've never seen another trackball so small! anyone used this? how is it?
- amatecha 5y agoAnother ultra-small trackball would be the one used for the MNT Reform[0] (which also happens to be open hardware). However, I don't know if it's fully ready-to-use with any arbitrary computer, yet. I know it's intended to be possible to be used with any computer but you'd have to check into that yourself. If you're interested and willing to be patient about it just keep an eye on the creator's mastodon account[1] where he posts all the most up-to-the-minute updates about the project. Or, heck, send him a message to ask about it :) [0] https://www.crowdsupply.com/mnt/reform https://www.crowdsupply.com/mnt/reform [1] https://mastodon.social/@mntmn https://mastodon.social/@mntmn
- ruined 5y agovery cute, but the ball on the mnt looks a little undersized for comfortable manipulation, and it's not shipping until december. and i'm impatient so i went ahead and ordered a ploopy :D
- amatecha 5y agoAh yeah the ball itself does look a little small eh? Not sure, I haven't used one in person. One day I shall though, as I intend to order an MNT Reform sometime soon! Hope you enjoy the Ploopy!!
- j-pb 5y agoI have one and I love it. Feels super nice, very accurate. The only thing I'd change is giving it a full body click, so that the entire case/ball functions as a button when pushed down.
- ruined 5y agoyeah, im a little apprehensive of having a clickless pointing device, but i already have occasionally-used mouse buttons mapped on my ergo so it shouldn't be a huge hurdle
- bloopernova 5y agoThank you, this seems like a good option once I get my Keyboardio Model 100 in the new year.
- notorandit 5y agoDied!
- butterisgood 5y agoSite went… ploopy.
- acherion 5y agoShop is quite slow, maybe the hackernews hug of death?
- wwn_se 5y agolooks like a overload
- tyingq 5y agoTheir wordpress engine is starting to falter here and there. Nice products and approach though. Hopefully they get a cache in place while the sales funnel is open.
- robin_reala 5y agohttps://webcache.googleusercontent.com/search?q=cache:https%3A%2F%2Fploopy.co https://webcache.googleusercontent.com/search?q=cache:https%... (!cache bang on DDG with the URL will get you there quickly)
- Fordec 5y agoI'm not sure how "open" I consider a pdf of the schematics (no sign of PCB layouts), compiled hex files and I'm unsure where the mechanical 3D files are. [0] When I think of open hardware I imagine Kicad/Altium files of the electronics (not gerbers), access to the C, C++ or Rust firmware and the STEP files at least or other source modifiable files so they're 3D printable if I was so inclined to modify all three. [0] https://github.com/ploopyco/mouse https://github.com/ploopyco/mouse
- amatecha 5y agoHmmm, I notice there is full source for everything for their Classic Trackball[0], which is super awesome. Maybe they just haven't finalized the Mouse stuff yet? Not sure. I do share your confusion about that one. [0] https://github.com/ploopyco/classic-trackball https://github.com/ploopyco/classic-trackball
- onlydnaq 5y agoI don’t know where the files for the mouse are (or if they’ve been released), but the design files for the trackball can be found here [1]. [1] https://github.com/ploopyco/classic-trackball/tree/master/hardware https://github.com/ploopyco/classic-trackball/tree/master/ha...
- cookiengineer 5y agoI was looking through the repos for the Classic Trackball, too, but found the design files and was kinda impressed that also the PCB files were open [1]. They contain the Altium Designer files in that case. The only thing why I'm probably not going for it is that 1) shipment would be way too much to justify and 2) the STLs seem to be 3d printed instead of injection molded or similar, so the "no cheap shit" argument on their website is kinda different for me if I have to print all files myself anyways. [1] https://github.com/ploopyco/classic-trackball/tree/master/hardware/Electronics/DesignFiles/PCBs https://github.com/ploopyco/classic-trackball/tree/master/ha...
- walrus 5y agoThe trackballs are listed as "completely open-source" on their website, but the mouse is listed as "open-source firmware". This is consistent with what's available on their GitHub page—the Altium and STEP files for the trackballs are available on their GitHub page, and the firmware for all their products (including the mouse) has been upstreamed[1]. [1] https://github.com/qmk/qmk_firmware/tree/master/keyboards/ploopyco https://github.com/qmk/qmk_firmware/tree/master/keyboards/pl...
- onlydnaq 5y agoI have one of the full size Ploopy trackballs, and it feels really good in the hand. It is 3D-printed, and it shows, but the texture of it feels pretty nice when using it. I struggled a bit with accuracy at first, but now I’ve lowered the DPI to around 500 and it’s become much more usable for me since.
- systemvoltage 5y agoI wish they'd invest in proper injection molding tooling and get these made professionally. You can do that very cheaply in Malaysia and Taiwan, and of course China. Total cost for tooling and integration/assembling jigs would be around $50-100k including engineering labor for mold design. It will take solid 2 years of work to get it absolutely perfect and to ramp up production. As much as these are philosophically cool, I am definitely not buying anything that's 3D printed. It's fine for tinkering, otherwise just garbage. Ya'll need a new name - ploopy is too close to poopy.
- thrtythreeforty 5y agoI think you and I have different definitions of "very cheaply." Small scale products like these are brutal on people who try to do small manufacturing runs (say, 1000) because that measly $50k becomes +$50 on each unit. Keyboardio liked to talk about this when they were building their first models.
- systemvoltage 5y agoThey should do fundraising. There is a critical energy needed to go over the hump - stay on the left side and forever keep making low volume goods. Get funds, seriously invest and it can become a solid competitor to high end mice from Logitech - difficult but worthy of pursuit. I've worked on both sides of the asymptote, not trivializing but products like this are in uncanny valley. Folks at WASD keyboards took 3 years to scale their Code-keyboards - it is hard to do but their keyboards are rock solid now.
- elcritch 5y agoTo be fair, you could probably get a basic injection mold for these kind of parts for $3-$6k [1]. Likely you'd still have parts that'd be 3D printed. 1: https://icomold.com/much-injection-molding-cost/ https://icomold.com/much-injection-molding-cost/
- Karliss 5y agoFor very low runs maybe casting appropriate resin or polyurethane in a silicon mold might be suitable. That's doable in DIY setup with biggest investment being time and few hundred dollars worth material at most.
- scbrg 5y agoI've always considered Microsoft's Trackball Explorer the best pointing device I've come across (oh I wish Microsoft could stick to making hardware!). Apparently I'm not alone, since they go for hundreds of dollars on the second hand market. It looks like Ploopy's Classic Trackball comes fairly close to the form factor. Very tempted :-)
- Clewza313 5y agoPer the site, the fully assembled retail price for the Ploopy Classic would be $209.99-$227.49 CAD if it wasn't out of stock. Even the DIY kit runs $139.99-$157.49 CAD depending on options. https://ploopy.co/shop/classic-trackball-full-kit/ https://ploopy.co/shop/classic-trackball-full-kit/
- h2odragon 5y agoI'll pop up and mention that Elecom makes a worthy successor to the MS Trackball; and in small and large sizes, to boot. I kill keyboards and trackballs and my elecom's have been at least as sturdy as the MS Trackballs were. Easier to clean, too. https://forum.trackballs.eu/viewtopic.php?f=17&t=58 https://forum.trackballs.eu/viewtopic.php?f=17&t=58
- john_yaya 5y agoSeconded on the Trackball Explorer, it was an absolute joy. The day I started using one, I immediately went out and purchased a backup. They’re both dead now.
- mimsee 5y agohttps://archive.is/whB5d https://archive.is/whB5d
- tartoran 5y agoAlmost bought one but the server stopped responding. Will definitely bookmark this and try again later
- crazygringo 5y agoJust curious what's behind the name... "ploopy"? I mean, when a name manages to combine "plop" and "poopy" in a way that makes it really hard to think of anything but the toilet... it just makes me wonder why they chose that association?
- Clewza313 5y agoMy first guess would have been that this is from a European company, which often have product names that don't sound quite right to a native English speaker [1], but cursory Googling [2] reveals that Ploopy Corporation appears to be run by a Colin Lam from Mississauga, Ontario, next to Toronto and not even in Quebec. So your guess is as good as mine. [1] https://en.wikipedia.org/wiki/Plopp https://en.wikipedia.org/wiki/Plopp [2] https://www.bizapedia.com/canada/ploopy-corporation.html https://www.bizapedia.com/canada/ploopy-corporation.html
- katmannthree 5y agoI believe he's commented on reddit that he likes how it's a memorable, funny name.
- Clewza313 5y agoInteresting. Although he really should have gone with a serious, enterprisey name like "Google" or "Tiktok".
- i_am_proteus 5y agoDoes anyone know how these compare with the L-Trac? $150, USA made, they don't seem to advertise, but it's handily the best pointing device I've ever used. Seems to get by with an annual cleaning, too, unlike other trackballs I've used.
- riversflow 5y ago+1 for the CST L trac. There was a shortage for a little bit, because the people who were running Clearly Superior Technology retired and had to find new people to manufacture/sell it. Which they did, the old clearlysuperiortech domain now sends you to the Xkeys domain,[1] its a pretty beloved device by people who use them, so they were able to find somebody to pick up the torch really fast and if I remember correctly shipped all the tooling to them. Alas, I can't find an archive of the page that was up announcing the whole thing in detail. Really great product. Anyway I can't vouch 100% for the new Trackballs, but I wouldn't think twice about buying another one if e broke. Two big advantages with the L-Trac, first it has very different ergonomics from a mouse, unlike most other trackballs on the market. (I still use mice for gaming, but too much mousing will give me an RSI in my wrist.) The CST trackballs really promote a fully open hand posture, and for me at least the pinching with my thumb is what gives me problems with mice. The other is the roller bearing that make the ball much smoother to operate than anything I've compared it against. [1]https://ol.reddit.com/r/Trackballs/comments/egcf41/clearly_superior_technologies_closing_sad_to_see/ https://ol.reddit.com/r/Trackballs/comments/egcf41/clearly_s...
- i_am_proteus 5y agoThanks for all of that! I never knew the history, just loved the product.
- __mharrison__ 5y agoI've never cleaned mine after 8? years... maybe I should. It seems to work fine, just roll it around and it cleans. I guess if I open it up I can mod it with a pool ball though
- baybal2 5y agoI really want to get a trackball-mouse for CAD work, but they seem to have completely went extinct in the last decade.
- dang 5y agoOne past thread: Ploopy: An Open-Source Trackball - https://news.ycombinator.com/item?id=21263264 https://news.ycombinator.com/item?id=21263264 - Oct 2019 (84 comments)
- ChrisArchitect 5y agoGreat Unisys' ghost, that red ball
- ChrisArchitect 5y agoReally not new tho. Is there anything new here from 2 or more years ago?
- chrisdinn 5y agoThere are two new trackball models released this year, the nano and mini.
- ChrisArchitect 5y agoah good, thank you
- peterburkimsher 5y agoIs it possible to customise the colours for manufacturing? I'd like to make a brown & green trackball that looks like an avocado.
- askvictor 5y ago3D print your own?
- peterburkimsher 5y agoFor the enclosure, yes! But a 3D printed ball seems like it would be difficult to smooth out.
- askvictor 5y agoOh, right, only just twigged that you'd need a custom ball. Depending what it's made of, it might be possible to dye it?
- tempodox 5y agoIn theory a trackball is nice (I've used one for years). Your wrist can rest while your fingers do the moving, and it keeps rotational momentum after you lift your fingers, making long movements easier. However, your fingers will always be a little sweaty and the ball will deposit that on the wheels inside the device that transmit the movements. Keeping those clean over time can be quite a chore, but if you don't clean them the transmission will become unreliable. If a trackball could be magnetically suspended so it floats without touching anything and still transmit its movements, that would be perfect. You'd only have to clean the ball itself once in a while, and that would be easy enough.
- easygenes 5y agoProbably a ball with a fine black and white grid pattern and a fast imaging sensor could be used to achieve this. So long as it's sending updates at around 100hz, should be pretty performant. Edit: Could also probably be something that's alternating bright and dark in IR so the ball doesn't look weird.
- unnouinceput 5y agoIR and UV, much easier to decode as they are at opposite spectrum of visible light.
- henriks 5y agoThe one I have from Logitech uses an optical sensor for the movement itself. Gunk still builds up in the small balls that ensure the trackball itself rolls smoothly, so those have to be cleaned regularly anyway.
- easygenes 5y agoYeah, OP author mentioned magnetic suspension of the ball so I was kind of assuming that. A challenge with the magnetic suspension would be the "floaty" nature of it. You would have to filter out the noise of the ball itself getting moved around a bit as you rotate it.
- 5y ago
- ThePhysicist 5y agoI have been getting back to using Trackballs again after a 20 year hiatus. Currently I use the MX Ergo, MX 575 and its predecessor the MX 570 from Logitech. The cheapest model (MX 570) is also the best IMHO, as it seems that Logitech changed the sensor and made the ball harder to move in the newer models, which for me feels way more sluggish. But maybe it's just that I used the MX570 for longer already and it wore out a bit more. Anyway, having had trouble with pain in my wrist and mouse-work induced fatigue in my fingers I have to say that switching to trackballs has definitely improved this a lot. I also tried some vertical mice but overall I like the ergonomics of a trackball much more. A big benefit is that you can even use it when sitting on the sofa or the bed with the laptop (I know, bad habit), which is just impossible with a normal mouse. Also, I can't count the times I swept my vertical mouse off the table when reaching for it (as the height of the mouse still seems unexpectedly high to my brain), which just never happens with trackballs, obviously. I even enjoy playing shooters and games with a trackball, for my amateurish skill level the precision is good enough.
- ghaff 5y agoI used trackballs for a longtime until my favorite and discontinued Logitech one eventually gave out. I didn't like any of the current ones on the market and, by that time, there were trackpads on the market, at least the ones for Macs, that I actively liked rather than barely, if that, tolerated.
- yesimahuman 5y agoSame here. After trying every alternative ergo mouse on the market I landed on a trackball and I love it. It has no wrist movement so makes all those ergo mice decisions irrelevant and it quickly becomes second nature and feels faster than using a traditional mouse. Agreed fps games are weird but on the few games I can’t use a controller it actually works pretty well and more than enough for my needs. Also yes the sofa usage is awesome. Didn’t even think about this being an advantage, but I do it all the time
- dsr_ 5y agoI have discovered that switching every few weeks between trackball, mouse and touchpad reduces fatigue for me. Because they feel so different, I don't lose any muscle memory.
- porker 5y agoAny Kensington Slimblade users here? I adopted it a couple of months ago due to wrist pain. My accuracy is fairly good however I cannot reliably double-click, let alone triple-click, something I used a lot in my IDE! Is there a technique, or is this something Trackballs (or this particular trackball) aren't good at?
- serf 5y ago>Is there a technique, or is this something Trackballs (or this particular trackball) aren't good at? no problem like that here -- trackball user for life. I'm left handed, my pinky and ring finger sit on the LMB and my thumb sits on RMB/mouse-wheel, on a kensington. No special technique as far as I am aware.
- mkl 5y agoI'd guess it's that particular model, as none of the trackballs or mice I've tried have been like that. Maybe try a Kensington Expert Mouse? Same form factor as SlimBlade, but the buttons look more like proper buttons. I have several of them, and have never had any clicking problems (it's quite a bit easier than a mouse, in fact, because the pointer stays still). I haven't tried a SlimBlade, and don't plan to (I like a physical scroll ring), but I can recommend the Expert Mouse (though I wish they'd called it an Expert Trackball or something!). I recommend the wired version over the wireless one.
- lycopodiopsida 5y agoYou can just map a combination of two buttons for a triple-click. Also, the trick is to click somewhere near the trackball, the buttons have lower resistance there. This said, I've never found my Slimblade comfortable and have accepted that my Magic trackpad is the most ergonomic device for me. Every time I use a trackball I get hand fatigue due to palm shape and hard buttons. Precision movements are also hard on big and hi-res monitors. I am always re-adjusting the cursor position.
- egypturnash 5y agoYou've got four customizable buttons on it; consider setting two to double- and triple-click.
- trojan13 5y agoDuring my time in university I was researching about computer mice and how the size affects the performance. With how easy it is to design and print your own computer mouse it would be awesome to have an open standardized testing kit to see how the user performance changes with the mouse.
- dgrabla 5y agoI have one of the original right hand Ploopy trackballs. - It comes in a kit and as you need to assemble it, you feel emotionally attached to it - The designer (Colin) probably has big hands. I have a small hand and it doesn't fit right. - The 3d printed texture is great. - The ball doesn't 'flow'. It doesn't keep momentum. You apply a strong movement and it spins dead within the second. - I absolutely love it is open source, but there is not much of a community around it, probably because the barriers of entry are quite high. I never found the time to hack it myself. - It tracks the movement extremely well. Accuracy, precision are awesome. Better than any other trackball I have (and I have MANY). On par with the logitech mx master. - The position of the thumb wheel is not good for my hand. After months of use it started giving me RSI. And now everytime I use it, I notice within the hour that something is not right. My perfect trackball would be the ploopy: - With a smaller body for small hands - With momentum in the scroll wheel ALA logitech mice - With a different position for the scroll wheel
- geniium 5y ago> - With a smaller body for small hands That's actually a nice idea. It would be great to have three sizes, like S, M and L.
- thefunnyman 5y agoEven better, some kind of configuration that accepts a range of values and then generates a model. Dactyl keyboards work this way https://github.com/adereth/dactyl-keyboard https://github.com/adereth/dactyl-keyboard
- geniium 5y agoInteresting! Personally I like the ZSA Moonlander. You can adjust it pretty well.
- 1MachineElf 5y ago>The ball doesn't 'flow'. It doesn't keep momentum. You apply a strong movement and it spins dead within the second. For this issue, some people have modified their Ploopy trackballs with great success using Ball Transfer Units. Here's a long blog post about it: https://www.gbryant.co.uk/posts/2021-02-15_ploopy-trackball/post.html https://www.gbryant.co.uk/posts/2021-02-15_ploopy-trackball/... An example video of BTUs functioning in a Kingston trackball: https://www.reddit.com/r/Trackballs/comments/ddlovq/ladies_and_gentlemen_it_has_been_done_btu/ https://www.reddit.com/r/Trackballs/comments/ddlovq/ladies_a...
- dbeley 5y agoAnother happy user of a left-handed classic trackball here! It feels perfectly right in my hand, the 3d printed texture is fantastic and the qmk firmware allows a level of customization you will never see on more consumer-oriented products. Some drawbacks I can think of are the mouse wheel placement and feeling, the USB type B connector and the included ball that is not perfectly round (there is some sort of tiny nub on top of it that can interfere with the bearings).
- Wronnay 5y agoI wished they had a vertical mouse. Currently use one and prefer it over a normal mouse...
- bloopernova 5y agoOh good lord, the mouse has the buttons just where I want them!!! and it's QMK firmware, which means I can have it send keystrokes not just mouse buttons. Oh Frabjous day!
- 1MachineElf 5y agoI'm the 0.01% of people who aren't happy that it's using QMK. Previously it had it's own mouse firmware, and I wish it was still actively maintained for this and the Ploopy Nano. Due to the new QMK firmware, the Ploopy cannot be used simultaneously with some very expensive KVMs and KMs. That's because they are all built on the assumption that they are connected to one keyboard and one mouse. I have tons of great QMK keyboards and I can't use them with the Ploopy on these switches because of this.
- zorgmonkey 5y agoI don't have a QMK device to with, but from a quick look at the source code it looks like you could build QMK without MOUSE_ENABLE defined and flash that firmware to your keyboard to workaround the problem with your KVM. I would also consider opening an issue I would not be at all suprised if the devs have a better idea for how to deal with your quirky KVM
- OJFord 5y agoInteresting, I would've assumed they (the keyboard/mouse part) were just USB switches. What's the (supposed; not in your case) benefit to them doing any HID-aware stuff? No Windows 'device connected' bongs when you switch (because it's always identifying as the KVM, just not sending anything)? Anything else?
- nonesuchluck 5y agoEDID emulation is great when you have multiple screens, and wish to prevent MS from randomly scattering your Windows all across your other screens every time you click to another input. I don't miss the BONG!s, either.
- 5y ago
- boomboomsubban 5y agoIs there a reason these couldn't offer a PS/2 option? I don't understand a ton about hardware, so there may be an obvious answer to this question. I just remember looking for a decent PS/2 mouse with more than 2-3 buttons after reading too much about USB vulnerabilities and found the market completely lacking. I've assumed there's a technological limitation, but seem to remember owning a such a mouse in the mid 2000's.
- detaro 5y agoNot really a technological limitation (PS/2 interface is a bit weird, but not too bad, and actually not sure if a mouse even needs the weirder parts), just likely almost no demand inside the already tiny niche for this product, so I'm not surprised they didn't bother.
- 1MachineElf 5y ago+1 Such a PS/2 mouse would be very exciting to me. I love everything about the Ploopy except for the firmware - QMK makes things complicated for my expensive KVMs/KMs. A dedicated mouse protocol would be ideal. QMK doesn't provide that, but PS/2 could. WRT PS/2, demand is too low and I don't realistically have the knowledge, time, and resources to make one.
- crazygringo 5y agoCan't you just get a USB to PS/2 adapter? Seems like the obvious solution, and they run about $6. And no USB vulnerabilities are going to make it through the adapter, correct?
- boomboomsubban 5y agoWhen I did my research I was searching for mouse and keyboard, and those adapters could hold keyloggers themselves making it only an improvement not a fix. There may have been more I'm not remembering, this was several years ago and my realization that it was a silly concern for my home PC led me to forget most of what I read.
- pointhi 5y agoYears ago I also started designing an OSH mouse[1] as there was nothing on the market (in comparison to OSH keyboards). The main problem I encountered was mechanical design, as with 3d-printing it is hard to get a good mouse-wheel with vertical scrolling. The same goes with the other mouse buttons, where you also want good tactile feedback. [1] https://hackaday.io/project/7929-ardumouse https://hackaday.io/project/7929-ardumouse
- tim-- 5y agoWhat can I do to support this project?
- protomyth 5y agoIt would be amazing to have an open sourced replacement for the Logitech TrackMan Wheel wired trackball. The price they command shows the interest in trackball controlled with your thumb. It had a better feel than the current model. I kept two running for years but they finally gave up the ghost.
- aviatordongle 5y agoI want one but don't know why. What's the benefit of have open firmware for this?
- foxfluff 5y agoYou can customize it.
- silentclickclub 5y agoAre there any options for silent clicks? A few mice have this option these days but impossible to find for trackballs.
- smallerfish 5y agoI use Logitech Trackman trackballs. Every 2 or 3 years I have to replace them, because a) the varnish on the ball wears out and it becomes stiffer to move and b) (maybe) the bearings on the inside stiffen up. They're only $25 though, and the ergonomics are excellent, so I'd need a $150 trackball to last 12 years to make it worthwhile. Of course economies of scale and all that.
- NoGravitas 5y agoI've been using the thumb operated Logitech trackball, whatever the current release of it is when I buy one, since 2002 or so. I think I've gone through three or four? My current one is the wireless one from 2014 or so, and I don't like it quite as much as the old ones, but it's better than having a mouse.
- reaperducer 5y agoI'd need a $150 trackball to last 12 years to make it worthwhile Only if you choose to exclude social factors from your shopping decisions. I get it, lots of people do. That's why we have WalMart and Amazon.com and Target filled with cheap Chinese junk while the small business down the street can't get shelf space. But if you're someone who values what the company is doing, that 12 years may be closer to five or six years. And if the quality is better than Logitech, it may last that whole time, instead of requiring replacement every 2 years. (I don't use trackballs or mouses, so I have no skin in this game.)
- literallyaduck 5y agoI prefer a symmetrical marble mouse.
- Matrixik 5y agoI'm using one from few years and really like the shape but it starting have double clicks or not registering clicks at all and I would really prefer to have proper scroll wheel. And looks like I will buy GameBall[1] that is completely new (so don't know long term reliability) because there are no other good replacements for Marble. They will be selling limited edition from today and standard edition should be available from September. [1]: https://www.gamingtrackball.com/ https://www.gamingtrackball.com/
- gwbas1c 5y agoOne thing this really points out is how products that's ultra-hackable and ultra-customizable are often more expensive than typical mass-produced, ultra-cost-shaved alternatives. IE, the Ploopy mouse costs $130, but a generic wired mouse costs $13. I'm tempted to buy a Ploopy mouse because it has dedicated copy & paste buttons... (I don't think I'd ever hack it.) But then again, it has a cord! I personally was a holdout and kept using a wired mouse long after everyone cut their cord, but I don't want to go back to a wire. (And I don't want to hack the mouse to be cordless.)
- weego 5y agoIt's a 3d printed shell and some fairly stock bits. How anyone thinks that justifies nearly $200 assembled is beyond me. Also almost all claims that a specific keyboard / mouse design from someone 3d printing their own stuff is ergonomic are dubious at best and more than likely just a sales tagline.
- LeifCarrotson 5y agoAnd this sentiment is why so many hardware startups fail. At small scales, you need sale prices 2x, 4x or more above your BOM costs to have any hope of profitability.
- Cyberdog 5y agoOpposite here. After trying a few, I have no interest in buying cordless mice and will actively go out of my way to make sure any mouse I buy is corded. Even if things have gotten better in the last few years since I've tried them with regards to lag and such, there's still the annoying battery situation. Sometimes there's just no replacing a direct connection. All that said, I agree on the price on these. I'd love to have an open-firmware mouse, but $130 is too steep for a productivity mouse and there's not enough buttons for a gaming mouse (I like using the MMO-style ones which basically have a 10-key pad under your thumb).
- gwbas1c 5y ago> there's still the annoying battery situation That was what kept me away from cordless mice for decades. Now I seem to get about a year on a set of batteries. Do you use your mouse for gaming? Image manipulation? I don't have accuracy issues, but sometimes I notice a very slight lag if I haven't touched the mouse in a few minutes. Personally I'm willing to put up with that compared to the cord getting in the way.
- zabatuvajdka 5y agoI don’t get the naming of said device. Brand identity is important and a Ploopy just doesn’t sound very serious. I mean, ploopy rhymes with poopy. The little mouse plooped a ploppity plop.
- marcus_holmes 5y agoInstantly reminds me of Wee Jock from Blackadder: https://www.youtube.com/watch?v=w5W5PtmNPKg https://www.youtube.com/watch?v=w5W5PtmNPKg
- yellowapple 5y agoIf there was a thumbball option I'd buy it in a heartbeat.
- LibertyBeta 5y agoI was going to buy the Mini Trackball, but.... the bearing structure just isn't it for me. Between using single direction bearings with PLA pins to the possible grinding its just a little to much work ATM. Oh, and direct screwing into PLA always worries me. The big one however has these mods in the community so that's awesome.
- deleted 5y ago[deleted]
- silon42 5y agoI'd want a mouse/trackball with proper Cherry Blue (or brown, maybe) buttons/keys. Is such a thing available?
- rgoulter 5y agoThe micro switches on mice can be customized. https://mouseclub.co/pages/mouse-switch-guide https://mouseclub.co/pages/mouse-switch-guide
- knaik94 5y agoI looked into index finger trackball mice and ended up getting the Elecom deft pro. It's 70usd, can do wired, wireless with a dongle and also bluetooth and you can switch between them with a hardware switch. It has proper buttons and the left and right click uses omron switches. It has proper driver support and pretty decent hardware. I use X-mouse button control along with the original driver which is a native app that hasn't asked to connect to the internet. There's full support to remap the buttons using Xorg config in linux with a relatively new kernel and most buttons remap using an older kernel. Most people, including me have switched out the factory ruby bearings for ZrO2 bearings. It's a simple disassembly and reassembly, a bit more advanced than install ram. It's not a huge difference but is definitely noticeable. I am planning on replacing the microswitches at some point as well, it's relatively straightforward to disassemble and all you'd need is a soldering iron. For me the experience has been really smooth and even though it's not open source, it's well supported and easy to mod. I looked at the ploopy but honestly felt the Elecom Deft Pro was a better value for my money. I also appreciate more buttons and an actual plastic shell and not a 3d printed product. I personally like Xbindkeys for when I use it on Arch. I found X-mouse button control let me map a button to switch the trackball into a giant scroll wheel which is really useful. You can remap buttons to copy, paste, and other gestures. Amazon US link (non-affiliate): https://www.amazon.com/Trackball-M-DPT1MRXBK-Bluetooth-High-Performance-Responsiveness/dp/B07C9T4TTW https://www.amazon.com/Trackball-M-DPT1MRXBK-Bluetooth-High-... Disassembly pics: https://imgur.com/a/XzUOey1 https://imgur.com/a/XzUOey1