14 ms·
The San Franciso Fire Department makes its own wooden ladders by hand
- legitster 8y agoIf you get a chance to visit a Smokejumper base, I highly recommend it. One of the things you learn is that everyone on the team is required to make all of their own equipment by hand. So all of these highly trained, ex-military guys spend days on end doing nothing but sewing clothes and packing parachutes. The reasons described: - Cheaper than contracting out everything - They have a better idea of the exact specifications they need for everything - It instills a strong culture of self-reliance and trust (anyone has to be able to pack your parachute) - It fills a lot of offseason downtime My takeaway is that it makes a lot of sense to in-house your own tools - a lesson from outside of the software industry.
- Retric 8y agoThe San Franciso Fire Department is using wooden ladders due to an abundance of overhead power lines. Which I think is the core issue, use other peoples tools unless you have some critical and unique requirement.
- heartbreak 8y agoThey could buy wooden ladders, so I don't think that paints the whole picture.
- icegreentea2 8y agoArticle says they are one of two wooden manufacturers in California.
- Retric 8y ago> They could buy wooden ladders Can you point me to someplace selling 50' wooden ladders appropriate for firefighting?
- jdietrich 8y agohttp://alacoladder.com/fire-ladders/ http://alacoladder.com/fire-ladders/
- mkhalil 8y agoFor the right money, you can find the right ladder. It's not going to be cheap though, because you have to age the wood. I wonder if there is a way to age the wood to SF humidity/climate faster than real time. Just feels like there has to be.
- garmaine 8y agoPressure? But it’s going to be mighty expensive to build a pressure chamber that big.
- pbhjpbhj 8y agoWhat pressure do they need, a length of pipe might do?
- jaggederest 8y agoNegative pressure might be more useful. Boil out the water under half an atmosphere, and replace the atmosphere with dried nitrogen and a chunk of desiccant. You'll probably damage the wood if you do that though. Now I want to try it in my vacuum chamber, but I'm not sure it'll hold vacuum for weeks/months at a time.
- madengr 8y agoSo I wonder why fiberglass ladders are not used?
- deleted 8y ago[deleted]
- noer 8y agoHeat deteriorates fiberglass
- mdorazio 8y agoDo you have any data to detail this? Fiberglass is glass fibers + resin. Decent resin doesn't melt or become weak with normal heat, it just thermally stresses at some point (we're talking > 180C at which point a wood ladder would be on fire). Wood also has issues with heat - it expands, which can cause buckling and cracks. I'm trying to find fiberglass temperature-strength data to figure out why it's not used in fire ladders and am coming up short.
- mmagin 8y agoAs far as I can tell after some brief googling when I saw this article earlier today: 1. Fiberglass ladders tend to use polyester resin. 2. polyesters tend to have a glass transition temperature (i.e. where the polymer starts to become soft and lose its shape) in the 75 to 125C range. Wood combustion temperatures are typically about twice that. Also, incidental heat contact can char the surface of the wood and leave it mostly structurally intact.
- namibj 8y agoThe choice of resin can be accomodated, using polyamides as a matrix with suitable glass (some low-temperature types might not work), or with carbon fibers, should allow ~400°C/ 670K as a usage-limit. If it were to be coated with e.g. CVD SiO2 or something similar, it could have a pretty high reflectivity in the higher-temeperature thermal radiation range of light (where most of the radiation heat from a fire is in). The mentioned charring is a very important property in buildings, as solid (hard-)wood pillars have astonishing endurance in a full-scale fire, due to them smoldering slowly from the outside in, compared to e.g. steel framing that quickly softens throughout. One additional factor is evaporative cooling/associated covering with mostly inert water vapor due to the water contained in the wood and the water released from the cellulose fibers upon thermal decompositon.
- hinkley 8y agoI think the low yield strength of aluminum also plays a role here, as one guy mentions. But I’m surprised thermal conductivity didn’t rate a mention. There was a time when aluminum bikes were new but before the parts likely to bend were replaceable where many a bike owner had to buy a new frame due to misadventure. You can only bend aluminum once, then you’re done. When they started making cogsets with more than six gears they went with axles about half a centimeter wider, and you had a similar conversation. You can have the longer axles but you can’t change your mind after. They have to bend the stays slightly and there is no going back after that (and let me tell you, the mechanic got really quiet when they did the bend. You want to get it just right and every bike and every frame size is different. You pull until you feel the metal just start to give and just after that is your 5mm) Steel frames could often be rebent. But they’re heavier and they don’t like moisture. And their strength to weight ratio is only about the same as wood. Probably also bad options for firefighters.
- sleepydog 8y agoThere is actually a company that manufactures very high-performance bicycles out of hardwood: https://renovobikes.com/pages/why-wood https://renovobikes.com/pages/why-wood They cost a pretty penny, such that I would be afraid of losing or damaging them.
- sjg007 8y agoAlso bamboo bikes: https://booomers.com/ https://booomers.com/
- ghaff 8y agoThe other property of aluminum that is relevant for some uses (but likely not ladders for most uses) is that, unlike steel, it doesn't have a well-defined fatigue limit. Therefore, it can eventually fail after a large number of even relatively small loads that don't visibly deform the material. That's one of the main service limits on airframes.
- lsiebert 8y ago
- kwhitefoot 8y ago- a lesson from outside of the software industry. Not really, just a forgotten one. Fred Brooks described his ideal development team in The Mythical Man Month and it included a toolmaker.
- mathattack 8y agoThat was also written before there were many commercially available tools. (Still a great book!) Perhaps tool specialist is more important today?
- was_boring 8y agoI believe a toolmaker on a team is still critically important. I have yet to see a team or organization that doesn't have a suite of (often poorly maintained) custom tooling that automates things together or provides functionality critical to the business.
- hrktb 8y agoInterestingly the more critical these tools are, the less maintained they will be. They often fall in the middle of everything, and there is no set team to handle them (“everyone’s responsible”). Then as they’re critical, someone can’t just take half an hour to do a quick fix, it must be reviewed (and no one actively wants to review it, as it’s not trivial and not their job —- cf “everyone’s responsible —-). Plus anyone succesfully fixing them will be flagged as a potential maintainer when everyone else is running away. Internal tooling in software companies is a beast in its own.
- shitgoose 8y agothe toolmaking, that is being discussed here, is not generic, but very specific to the business. tool specialists today are probably even more important, because "we" (collective IT industry) became carried away with frameworks and lost ability to solve simplest problems by hand (the infamous 'leftpad' comes to mind; or was it rightpad?). writing small, targeted, fast code that solves specific business problem is the lost art now.
- BurningFrog 8y agoIt makes sense for a job where 95% of the time is spent waiting for an emergency to react to.
- deleted 8y ago[deleted]
- enriquto 8y ago> a job where 95% of the time is spent waiting for an emergency to react to. this describes quite accurately the work of many people maintaining computer systems
- craftyguy 8y agoI must be maintaining the wrong systems, because over here 95% of the time is reacting to emergencies (some technical, but most fabricated by management)
- qop 8y agoFirst thing that came to my mind too! I've had two "Please call me, it's broke" calls just this morning!
- WJW 8y agoWhy does your manager know this before you do though?
- rurp 8y agoIt could be the case that nothing is actually broken. I have unfortunately received a number of similar calls on systems that were working exactly as specified. Random nonsense "disasters" can happen a lot in dysfunctional companies.
- sli 8y agoI would never in a million years, as a developer, give my personal phone number to a client. That's probably why. I get the same issue where I work. The client states that "everything is broken," but it often turns out that their own servers are down (or sometimes our API guys made a breaking change and I wasn't informed, but that's not common anymore). I find this stuff out when I get to work in the morning, because they certainly aren't calling me directly.
- PakG1 8y agoI remember reading in a Navy Seal's memoirs that when training to be a sniper, they were all responsible for making their own camouflage suits. The point being that when you're out in the open, you have to know how to make use of what's around you to camouflage yourself.
- JackFr 8y agohttps://en.wikipedia.org/wiki/Ghillie_suit https://en.wikipedia.org/wiki/Ghillie_suit
- _bxg1 8y agoMy takeaway is that there are benefits to in-housing your own tools, not that everybody should. There's also a middle-ground available in the software industry: reading the code of the open-source tools you use. You can understand how your tools work without rebuilding them from scratch. Also, if you're using open-source (which most people do these days), the "cheaper" argument doesn't apply.
- hinkley 8y agoThose smoke jumpers aren’t making their own nuts and bolts, ropes, cloth, or felling their own trees. They’re making tools by assembly. Many of us work the same way. From what I understand every master craftsman has a small quantity of tools they either made themselves or at least modified to purpose. Tools with bits added on or ground off (eg, wrenches ground thin for tight spots, or magnetized). I class jigs as a separate category but I have no handy parallel for software.
- mike12345 8y agoA software equivalent to jigs, might be something like specialized project templates available in IDEs and the like.
- jmiserez 8y agoUtility functions and small self-contained libraries. Nice thing about software jigs is that copying them is free, so often they’re open-sourced.
- matwood 8y ago> From what I understand every master craftsman has a small quantity of tools they either made themselves or at least modified to purpose. I could argue editors we all use for coding are tools that we 'made' by assembly. My set of plugins and settings is different from the next person.
- ssdd 8y agoSituation here is of real world which is different from software world. Real world equipment can degrade/develop faults after use so its important to inspect them before each job(especially when risk associated are very high) which is possible only when person is familiar with equipment construction and building things yourself is the best way to get familiar with its mechanics.Whereas in software world, things don't degrade with use and we have option to automate inspection cheaply.
- igivanov 8y agoThere is one extremely good reason for packing your own parachute yourself.
- analog31 8y agoA related anecdote: There was for a long time, a history of students in certain disciplines such as physics and some areas of chemistry, making their own tools and equipment. My dad had to build an NMR as part of an analytical chemistry course. I built an exceptional amount of gear for my graduate research project. Of course there's the bit about using cheap labor. But a side result is that you have a chance of actually understanding how your tools work, which is beneficial when developing new tools or when the tools stop working.
- zrobotics 8y agoThat might have more to do with 1)students being cheap & 2)researchers often needing custom equipment that is unavaliable commercially. I know the justification given for undergrad chemists learning glassworking was the expectation that as professionals it would be a required skill.
- analog31 8y agoIt was for my dad. He was doing vacuum line work, so he pretty much had to do his own glasswork, because his requirements would change from one experiment to the next. Same as why a lot of scientists do their own programming. In my own case it was because instrumentation was the thing that I was ultimately interested in, and the expertise that I developed in grad school got me going in my career. The stuff that I built was on top of the roughly half million dollars worth of commercial equipment that I used.
- Bluestrike2 8y agoIt's called scientific glass blowing, and is a pretty interesting field that highlights some of what has to go on in the background for scientific research to progress. Some other reading: 0. https://blogs.scientificamerican.com/symbiartic/httpblogsscientificamericancomsymbiartic20110802we-blew-a-bubble-for-a-man-named-edison/ https://blogs.scientificamerican.com/symbiartic/httpblogssci... 1. http://www.latimes.com/local/education/la-me-caltech-glassblower-20160613-snap-story.html http://www.latimes.com/local/education/la-me-caltech-glassbl... 2. https://news.usc.edu/114014/uscs-scientific-glassblower-lets-chemists-dreams-become-reality/ https://news.usc.edu/114014/uscs-scientific-glassblower-lets...
- krschultz 8y agoI do question this a little bit. One of my hobbies is racing sailboats, which doesn't have quite as exacting requirements as fighting wild fires, but it still requires specialized gear. I could not for the life of me make the splice required for a particular component on my last boat. It always looked good, but it inevitably failed after a few days of racing. When I bought one from an expert it would last for years. Craftsmanship matters and you just won't become an expert building exactly the number that you need for yourself.
- jaggederest 8y agoFor what it's worth, every rated parachutist packs their own parachute. For the reserve chute, it's always packed or repacked by an FAA certified rigger, which is an incredibly high bar by comparison. They must be repacked every 6 months. The estimate is that on average a parachute will fail one in a thousand times, mostly due to packing error, seldom due to equipment failure. Maybe 90/10 ratio. For a reserve, the expectation is that they would fail less than one in 10,000 times they are deployed. Which means that, collectively, avoidable errors should only happen one in every million or so rides on a parachute. This is less often than the real observed rate (1 per 75k or so), but errors other than packing or equipment failure are often the root cause.
- theoh 8y agoAccording to Wikipedia, it varies. Some organizations don't require the jumper to pack their own parachute. What does seem to be a common principle is that "All riggers are jumpers and can be asked at any time to jump with a parachute they have packed." or in the US military, that any rigger has packed, without knowing who. http://en.wikipedia.org/wiki/Parachute_rigger http://en.wikipedia.org/wiki/Parachute_rigger
- jaggederest 8y agoYep. It's not really that you have to pack your own parachute, more that it's cost and convenience to do so, so it's pretty universal as far as I am aware. I'm not certified or anything but I've jumped a few times and that's what the 10k+ jumpers said at the time.
- maroonmed 8y agoNo wonder living in the Bay Area is so expensive...even their ladders are artisanal /s
- mylons 8y agoartisanal ladders
- dsfyu404ed 8y agox2. This seems like a case where there probably exists better options but the cost and friction of switching is too high. As long as the money's still coming there's no reason to look for alternatives though, especially when looking for alternatives would involve doing battle with a union over the jobs the alternatives would eliminate. Does SF really have that many more overhead power lines than other cities to warrant the extra expense? Firefighters elsewhere don't exactly get fried on the daily. Are there other types of cheaper (in terms of cost per ladder per year) ladders that can be used? Is there a high temp fiberglass? Does someone make aluminum ladders coated in rubber? Edit: per jdietrich's comment NFPA 1931 compliant fiberglass fire ladders do exist
- Retric 8y agoFiberglass is a terrible choice for these ladders. Most places use Aluminum or steel but that has conductivity issues with the amount of overhead powerlines in SF. They can be coated to reduce conductivity but that has other issues. http://lacountyfirefighters.org/items/Ground_Ladders_by_John_Mittendorf.pdf http://lacountyfirefighters.org/items/Ground_Ladders_by_John... 3. May chip and crack with impact forces. 4. May suddenly crack and fail when overloaded. 5. Can burn when exposed to flame.
- dsfyu404ed 8y agoAll those downsides apply to wood and aluminum to varying extents. It's a typical case of engineering trade-offs. Wood chips and cracks (well, splits but it's basically the same thing) dents in any metal structure cause stress rises that do basically the same thing for strength as chips and cracks in fiberglass. Wood and metal assemblies will all "fail suddenly" when overloaded because a huge part of their strength comes from their shape, they deform from overloading and that reduces strength (positive feedback loop). Regarding heat, a quick google search turned up [1] which is good to just shy of 400f, about same temp at which the strength of 6061 falls off a cliff. I also found this[2] which to me indicates that the underlying chemical science is at a point where a fiberglass should be able to replicate the heat resistance of aluminum. https://www.fibreglast.com/product/high-temp-epoxy-resin-3000/Epoxy_Resins https://www.fibreglast.com/product/high-temp-epoxy-resin-300... https://chemistry.stackexchange.com/questions/22198/are-there-two-compound-resins-that-tolerate-over-1000c-for-glass-carbon-fiber https://chemistry.stackexchange.com/questions/22198/are-ther...
- BarkMore 8y agoPrevious post on the topic: https://news.ycombinator.com/item?id=1852400 https://news.ycombinator.com/item?id=1852400
- petee 8y agoGreat read, but loved the end - ""Pete has collected all these different donuts over the years. They're all real, and covered with lacquer so they won't go bad. Some of these are ten years old.""
- sparrish 8y agoImpressive collection but I only see a waste of a good donut!
- mindcrime 8y agoThere's an old saying among firefighters: "The fire service is 200+ years of tradition, unimpeded by progress". Now obviously that isn't strictly true, and SF does have some good reasons for sticking with their wooden ladders... but one can't help but suspect that sheer tradition is a somewhat significant factor. Of course some departments adopt change faster than others, and some kinds of change are adopted more readily, so it's hard to make any sweeping generalizations.
- rconti 8y agoIt's interesting, and I wonder to what extent sticking to tradition like this also helps them stick to tradition with regards to values. I mean, obviously, not all values from 200 years ago are worth hanging on to, but I see the firehouse as a place of mutual respect and trust and understanding. I wonder how much of that culture would fade if they just threw everything away and replaced it, had a purchasing department, etc. (for example).
- core-questions 8y agoThis is where some of the real value of tradition lies. It's in the art of handing something down from mentor to protege, the time spent learning the craft, learning respect for what was done before, true appreciation for labour and effort.
- lisper 8y ago> one can't help but suspect that sheer tradition is a somewhat significant factor Only if you didn't read the article. "There's a city-specific reason why San Francisco has stuck with wood rather than swap over to metals, and the answer lies in looking up. The high-voltage cables and wires that guide the city's (oft-maligned) public transport system Muni, and trolley cars crisscross above nearly every street, mean that ladders made of conductive elements are generally just too dangerous to use."
- Naritai 8y agoIt doesn't explain why they couldn't just buy wooden or fiberglass ladders though. I'm sure there are many vendors who would be happy to fill such a contract.
- chrisseaton 8y agoAmericans seem to take a lot of pride in their fire brigades - their fire engines are still shiny and polished with more traditional signage and the fire fighters still wear helmets with their traditional shape. In the United Kingdom they wear more simple uniforms and the engines are just a box shape with no bells any more - seems a shame. Usually it's UK the has more ceremony in these kind of things.
- jakelarkin 8y agoguessing this also has to do with the fact that most American homes are single-family wood framed structures, so the relative importance to people is perhaps higher.
- davio 8y agoYou should see the fire engines in mountain towns. They look like monster trucks.
- chrisseaton 8y agoDoes each town fund and buy their own? Maybe that leads to more pride and respect for the equipment.
- cascom 8y agoyes - in many American small towns there is a what's often called a fire district that levies a small tax (often a property tax)that funds the fire department (which typically a volunteer force)
- jay-anderson 8y agoI'm not sure about local funding (I think there's a certain amount of state and county funding as well). I'm sure that differs for each one. They also often staff the fire department with local volunteers. I have a couple uncles that did this for years in a very small town (~600 people). The fire department was mostly used for preventing/stopping wildfires in the surrounding area (which occur fairly often). When I've visited in the past they would give us tours. They had mostly military vehicles which could make it over the terrain (the gama goat was pretty interesting) and a regular engine (which I believe was a hand-me-down from another city). They were proud of what they were doing there to help protect the community.
- exabrial 8y agoI'm surprised they don't use an ablative coating
- xixi77 8y agoBut, are these approved by the American Ladder Institute? https://www.americanladderinstitute.org https://www.americanladderinstitute.org
- SllX 8y agoI think the better question is: do they do the job the SFFD requires them to do? Given one of the ladders talked about in the article was over 60 years old and still in service, I think the safe answer is: yeah, they do the job.
- cesarb 8y ago> There's a city-specific reason why San Francisco has stuck with wood rather than swap over to metals, and the answer lies in looking up. The high-voltage cables and wires that guide the city's (oft-maligned) public transport system Muni, and trolley cars crisscross above nearly every street, mean that ladders made of conductive elements are generally just too dangerous to use. I wonder how it's done in European cities with their trams (the ones which don't use APS).
- xienze 8y agoFiberglass, probably. Which is what SF should be doing.
- ra1n85 8y agoMost ladders are fiber glass - which makes me wonder why any off the shelf ladder wouldn't suffice.
- maxerickson 8y agoIn my experience aluminum is more common than fiberglass.
- 52-6F-62 8y agoThe film industry uses almost exclusively fiberglass as well. There's no shortage. They're swimming in those things. I would bet their lifespan is shorter than the wooden ladders, however. At least from what I've seen.
- throwaway5752 8y agoFiberglass is reinforced plastic, though, so that might explain why it isn't used in FDs even if it's heavily used in other domains. How well does it hold up to heat? How does that exposure effect it structural properties? I honestly don't know and don't have time to look it up, but I could see thermal plastic deformation over such a long run as potentially hazardous.
- buchanae 8y agoGreat article, ruined by Gizmodo's disrespect for its readers by including animated junk on the page.
- AdieuToLogic 8y agoThe Discovery Channel's "Dirty Jobs"[0] show made a segment involving the SFFD's ladder construction/maintenance crew. In it, they explained that wooden ladders are cheaper to maintain than aluminum ones and I think also discount fiberglass ladders as well. It's worth a watch if one is interested in this topic. 0 - http://www.discovery.com/tv-shows/dirty-jobs/about-this-show/dirty-jobs-about/ http://www.discovery.com/tv-shows/dirty-jobs/about-this-show...
- deleted 8y ago[deleted]
- curun1r 8y agoLOL at SFFD giving any shits about costs. This is the same department that power grabbed emergency medical response away from dedicated paramedics in ambulances. Responding in full ladder trucks to take care of drunk homeless people...yeah, they do that, costing millions every year in added expenses and road repairs. But good for them for saving a few bucks on ladders, that must make a huge difference.
- AndrewUnmuted 8y agoComing from NYC, it is somewhat surprising to see such anger directed at fire departments. Here, the FDNY seems universally loved.
- snowwrestler 8y agoConsider the impact of 9/11. Prior to that, FDNY was of course well-liked, but not to the incredible degree it is today. The role they played in the response, and the heavy losses they suffered when the towers fell, resulting in a huge outpouring of grief, support, thanks, etc. It's still going today. Other fire departments perhaps benefit a little from that, but not to same degree as FDNY.
- gshulegaard 8y agoTBH I am from the Bay Area, work in SF, and I have never seen ire like that directed at SFFD before. I wouldn't take this example as representative or common.
- larrik 8y ago[2014] Dirty Jobs did an episode there in 2012 (which is probably where Gizmodo got their inspiration from) http://www.tv.com/shows/dirty-jobs/onion-processor-2392294/ http://www.tv.com/shows/dirty-jobs/onion-processor-2392294/
- deleted 8y ago[deleted]
- DannyBee 8y agoI can't think of any reason to acclimatize them this way instead of kiln drying/vaporizing them (depending) to roughly the right moisture content and waiting for 1% change (instead of kiln drying them to 0, or waiting forever for completely green wood) There are studies going back to the 70's by the forestry service (and others) showing there is no change in mechanical properties of pine/fir from these drying schedules. (This is not true of a lot of hardwoods, but is true of these softwoods) Waiting years seems like a pointless waste of time.
- maxerickson 8y agoThe stockpile is "tiny" so I guess it doesn't really matter unless they are running low on material.
- jeromenerf 8y ago> Waiting years seems like a pointless waste of time. They have a long running stock. They are not wasting time anymore, they may be wasting storage though. Something could be said about the stock fire risk exposure, but hey, they are the firemen after all.
- exDM69 8y ago
- jonknee 8y agoThis site has an interesting detail: https://sf-fire.org/wooden-ladders https://sf-fire.org/wooden-ladders > The largest ladder made by the artisans is 50 feet, weighs 350 pounds and takes six firefighters to lift.
- icey 8y agoI live near a fire station in SF, and see them practicing raising a huge 20+ foot ladder monthly out front of the station. They're pretty impressive ladders, and it looks like it takes quite a lot of coordination to raise them up.
- hfdgiutdryg 8y agoI would love to read about that big ladder with the multi-part, triangulated side rails.
- ddingus 8y agoI love this. Fire is a mutual threat. I will very gladly pay for great, capable people taking pride in what is so often tough, dangerous work. They can and should own as much as they think makes sense. Economically, the potential cost is trivial. Not a concern to me at all.
- jack_quack 8y agoThis is super cool but I'm positive this is also super wasteful
- ericzawo 8y agoI say the same thing about crypto!
- TimTheTinker 8y agocryptography != blockchain services
- BanazirGalbasi 8y agoYou should try reading the article. They specifically state that they re-use components whenever possible, and they regularly service their ladders to keep them in good condition. Aluminum ladders only have a 7-8 year lifespan vs some of the ladders they use going on 60 years before being taken out of commission.
- jack_quack 8y agoI don't just mean wasteful in terms of materials, but also in terms of man-hours, equipment needing to be owned and maintained. Once all factors for the total cost of ownership are taken in to account I highly doesn't it's efficient. It's like everyone growing their own vegetables.
- wpdev_63 8y agoGuess you would too if you were paid for all that overtime.
- qiqing 8y agoFavorite excerpt: "We had one ladder here that was fully involved in a fire for 25 minutes, and the whole tip of it—six feet—was crispy. It looked like a log you pull out of a campfire," Braun says. "That can't go back in service but we were curious, so we put a new halyard [rope used to hoist ladders] on it for a load test. Even in that condition, it passed."
- Doxin 8y agoWood is a surprisingly good building material for surviving fires. A nice thick wooden beam can take days to burn through in a house fire where e.g. a metal support would yield as soon as it gets hot enough.
- deleted 8y ago[deleted]
- threatofrain 8y agoReminds me of the supposedly dying art of scientific glasswork.
- packeted 8y agoLoved reading this! I just finished restored a 1912 house in Oakland made out of the same old growth west coast douglas fir - from the framing to the copious clear vertical grain and quarter sawn wainscoting, all stripped, sanded and refinished in a natural varnish. Great to see this kind of craftsmanship alive and well!
- ksherlock 8y agoYep, just like a Jedi warrior should build his own light saber and a programmer should build her own editor and a Tesla driver should build his own car, a firefighter should build her own ladder.
- robbrown451 8y agoIn related news, San Francisco is now the most expensive place to live in the whole world.
- chadwilken 8y agoOf course they do, that is the hipster capital of the world and hipsters need everything to be retro.
- butterfi 8y agoI would pay money to watch you tell a SFFD firefighter they were a hipster.
- TimTheTinker 8y agoThat was really funny. Thanks & kudos.
- TimTheTinker 8y agoRetro is not automatically bad because hipsters like it. Also, "hipsters" did not exist prior to 10 years ago. They've been doing this for a whole lot longer than that.
- emodendroket 8y agoI never knew we had so many experts on firefighting among us to tell us why this makes no sense.
- wenbert 8y agoIs there a good supply of bamboo in SF? If there is, they make really good ladders. Very light and very strong.
- bullosB 8y agoBut would they withstand fire ?
- duxup 8y agoI'd really like to learn some woodworking and make some stuff some day. I recently found myself admiring the grain on the wooden train track my kids were playing with...
- fuball63 8y agoI started with this book, which is a furniture book that uses a technique involving cutting slots in plywood. It's good practices measuring, cutting, sanding, and finishing. https://www.amazon.com/Fast-Furniture-Forgotten-Building-Beautiful/dp/0894710281/ref=sr_1_9?s=books&ie=UTF8&qid=1531342036&sr=1-9&keywords=fast+furniture https://www.amazon.com/Fast-Furniture-Forgotten-Building-Bea...
- Havoc 8y agoI like the mindset but... Wooden ladders are heavy as hell compared to alu ladders. Really not what I'd want to be schlepping across the place under pressure.
- dasil003 8y agoThey also conduct heat, electricity and lose their structural integrity faster.
- ladders 8y agoive spent most of my last 10 years on a ladder due to my job. This is absurd. Aluminum ladders require practically no maintenance and are far far lighter. Weight of a ladder being a significant factor in set up speed, required manpower for set up, and ease of handling. A wood ladder is completely impractical. Fiberglass however is another great option.
- hosh 8y agoFrom the article: > Wood is resilient in ways which aluminum—now standard for fire department ladders—can't even compare. "You know if you take an empty coke can and bend it three or four times and it tears really easy? That's what aluminum ladders will do," Braun says. "They have a seven to eight year lifespan, after which they need to be replaced." > Wooden ladders, on the other hand, can last indefinitely. "You can stress wood right up to its failure point a million times; as long as you don't go beyond that, it will come right back to where it was. They can be involved in a fire for a pretty long time; after that, it's just a matter of sanding off the top coat of material then inspecting the wood. If it's good we'll re-oil it, revarnish it, and put it back in service."
- djacobs 8y agoInteresting to see that this headline typo (copied from the Gizmodo article) has lasted on the front page of HN for 9+ hours! Chalk it up to only reading the beginnings and endings of words?
- sasaf5 8y agoHipster ladders :)
- kugestu 8y agoL
- kugestu 8y agoLpbvbkjjnlllmmnknbobjjnlp llpl
- dalbasal 8y agotrue