9 ms·
Inside a $34 smartphone
- bbrazil 12y agoWhile the phone doesn't meet it's stated spec, it's still pretty amazing that tech that'd have been top of the line a few years back now costs less than a night out.
- zokier 12y agoActually it is bit uncanny how you can basically apply a variation of Moores law. The specs of Huami H3 seem to be somewhat comparable to Nexus One, which was released almost five and half years ago. That puts 3.5 18 month cycles between the two devices. $34*(2^3.5) = $400, which sounds about right for "high-end" no-name Chinese phone.
- vidarh 12y ago$400 on Aliexpress gets you into the range of branded phones from brands like Sony, Xiaomi, Lenovo, Huawei, ZTE, Oppo, Jiayu these days. Almost none of the phones in that range are truly "no-name" (though beware the fakes) - even Oppo and Jiayu are fairly established brands by now, though obviously nowhere near as well known.
- userbinator 12y agoI didn't think of Jiayu as being in that range of the market, but apparently their reputation has been good enough that others have been faking their phones. They have some... interesting models like this one, which is far cheaper than $400: http://www.gizchina.com/2014/06/28/octacore-jiayu-g5s-review/ http://www.gizchina.com/2014/06/28/octacore-jiayu-g5s-review... I have the quadcore (MT6589) version and have gotten quite a few "is that an iPhone running Android?" questions, which somewhat adds to the experience of owning one. It's slightly bigger than an iPhone though.
- digi_owl 12y agoThis falls squarely within Moore's Law in the classic definition of transistor density. This because transistor density allows for two things, but Intel is only pushing one of them. First it allows for more compute power for a certain price. Second, it allows for a set compute power at a lower price. The second comes because you can stack more chips on a single wafer, and so get a bigger yield out of each production run. I suspect Intel avoids that one because it will inevitably lead to a race to the bottom.
- zokier 11y agoIn case you haven't noticed, Intel has been consistently been pushing towards smaller dies for some time now. Atoms are prime example, but it also happening in their Core series. See e.g. this http://www.kitguru.net/components/cpu/anton-shilov/intel-10nm-and-7nm-technologies-have-perfect-economic-feasibility/ http://www.kitguru.net/components/cpu/anton-shilov/intel-10n... article for "Weighted Average Die Size" graph. Or this graphic: http://729675461.r.lightningbase-cdn.com/wp-content/uploads/2015/01/5th-gen-intel-broadwell-u-CPU-improvements.jpg http://729675461.r.lightningbase-cdn.com/wp-content/uploads/...
- bruceb 12y agoWe already have $10 smartphones here (US) though they have 3.5 inch screens are run 4.0 not 4.4. You can get higher spec better screen phones for $75 or less if you send in rebates. In the US we have hit smart phones that are affordable to everyone and can do "most stuff" already.
- acqq 12y agoThe phone from the article fakes 4.4, it's actually 4.0.
- bruceb 12y agoI meant that 4.4 is latest version that most higher end phones use (most people have not upgraded to 5.0) I did read the article and saw the phone in question fakes most of the specs.
- diafygi 12y agoExamples? The cheapest I can find is the ALCATEL onetouch Evolve 2 for $19 at MetroPCS[1]. [1]: https://www.metropcs.com/phones/details/alcatel-onetouch-evolve-2/610214636966.html https://www.metropcs.com/phones/details/alcatel-onetouch-evo...
- pki 12y agoAlcatel C1 was $9.99 (att prepaid; earlier this month), runs 4.4.2 ZTE Whirl 2 is $9-19 and runs 4.3 Moto G is $29 (<!!!, as of last week - probably sold out by now, but max 2 per person on bestbuy.com; boost mobile moto g's standard price is $39 either way though: this is probably the best price:performance ratio in terms of not being a complete POS) ---- I pick up a few oddball phones for android testing/development.
- beagle3 12y agoThese are locked to a specific carrier every time I checked - they are subsidized. I've never seen an unlocked Android for less then $39=~$40 (But I don't look often, so I might have missed some)
- acqq 12y agoWow, only 200 MB RAM built in while Android still mostly working.
- agumonkey 12y agoReminds me when I installed Win XP on a 64MB/Duron box for my mother. The thing was running almost as fast as my Athlon/1024.
- jschwartzi 12y agoThe Galaxy S shipped with only 256 megs and a single core. It was a capable device at the time, although it can barely run any modern apps. I know this because I replaced mine only a month ago. As recently as 6 months ago it would run Spotify and Runkeeper simultaneously, though with recent versions of Spotify I lost the ability to multitask while not on Wifi. On Uber the only things preventing me using it were the custom text fields, which wouldn't allow me to key data in properly. The biggest memory hogs were recent versions of Google Play at 40 megabytes of ram, so I would keep the Google services downgraded unless I needed to install an app. The base Android system will run with surprisingly little RAM.
- vinceyuan 12y ago> This Huami H3 smartphone cost me $34US (210RMB) in January. It’s sold with a 5 inch screen, Bluetooth, WiFi, 4G cell connectivity, Android 4.4 and an 8 core processor. It's very cheap but good. And actually the processor has 2 cores.
- DanBC 12y agoI'm often keen to buy these super cheap phones, but then I see the outright deception involved and it's off putting. I hope Mozilla can encourage interesting but honest budget engineering.
- vidarh 12y agoYeah, the listed specs are more in line with $200 phones. Then too you need to be careful. E.g the first one I had in that range was a (physically) near perfect Samsung SIII replica, complete with the dandelion screen saver, and the place I bought it for hinted strongly that you could get it with the Samsung logo if I asked. I knew what I was buying (a much slower MTK based phone), but I saw plenty of places try to pass it off as a genuine SIII too, which at the time was substantially more expensive. This is often the best way of finding (reasonably) honest sellers: Look for other sellers offering the same phone and assume the worst listed specs are most accurate. The interesting thing is how they've gotten to the point of faking MTK cheap-ish based phones too, rather than just faking more expensive devices.
- pki 12y agoThe little bubble thing is a weird chinese quirk - http://www.businessinsider.com/chinese-use-assistivetouch-on-iphone-2015-5 http://www.businessinsider.com/chinese-use-assistivetouch-on... if you're interested on that
- lordnacho 12y agoAssistive touch is also useful if one of your real buttons gets broken. I borrowed a friend's iPhone to dev on it, but the power/sleep button was broken. AT solves this by providing an on screen version.
- carlob 12y agoMy brother found this because his home button was broken and now my parents have picked up on it even if their home button is perfectly functional.
- joezydeco 12y agoI was using it to bypass a broken lock button. Only catch is that you can't turn it on easily - plugging it in is the only way to restart the phone.
- digi_owl 12y agoReading about what assistive touch does on the iPhone, i find myself thinking about faucet design. These days you find this dual direction (lift to open, left and right to adjust temperature mix) type everywhere. But as best i can tell it was originally designed with handicapped users in mind.
- rimantas 12y agoA lot of tech started with disabled people in mind: telephone, remote control, even typewriter iirc.
- jacobolus 12y agoA faucet with an interface in terms of the two attributes you generally care about (pressure and temperature) is in theory much better for everyone than one in terms of two implementation-detail attributes (amount of hot/cold water flowing into the mixture). Unfortunately many of the one-control faucets have terrible mechanical engineering under the interface, and as a result you often can’t adequately control either pressure or temperature, and the two aren’t actually separated orthogonally (i.e. as you move the control along one axis both attributes change, and to change just one attribute you must adjust the control along both axes)
- digi_owl 12y agoHeh, i recall using compressed ram as swap during the waning days of my N800 usage.
- beagle3 12y agotl;dr: It runs Android 4.0.3/ICS, has 200MB ram, just two cores, possibly only 2G/2.5G, is clunky but works -- despite advertising 4.4/KitKat, 8 cores and 4G.
- historian1066 12y agoThis device is only running EDGE and not being a 3G smartphone is a big distinction. In practice, the low memory also makes it a very difficult sell to consumers, so I’m not entirely surprised by the marketing deception here. Shameless plug, my startup wholesales a 3G Android smartphone with 4GB memory running on a Spreadtrum chip that costs $30: https://www.voxsupplychain.com/shop/users/#/shop/product/android-3G/() https://www.voxsupplychain.com/shop/users/#/shop/product/and... We have found that there are some natural dividing lines on low-end Android specs. If you cut more corners, it really impedes the user experience.
- sauere 12y agoHow are you able to ship this to Germany for $1?
- historian1066 12y agoWe can ship 1,000 smartphones to Frankfurt's airport (FRA) for $1,104 USD, which is about a dollar per phone. Our minimum order is 1,000 smartphones, so that's not the same as being able to ship 1 device for $1. Also, we work directly with carriers and get wholesale rates for air and sea freight to major ports. Delivery to Hamburg by sea is about $0.05 USD per device for 1,000 smartphones.
- sauere 12y agoI missed the Quantity field. My bad.
- janjongboom 12y agoAre you sure that 3G license fees are paid on this phone? From my experience sourcing cheap phones this price is not possible unless you avoid the licensing. Lowest we could go for a SC7715 was about 35$.
- historian1066 12y agoYes, it is all rolled up into the price of the device. This pricing is just for delivery to a port (CIP incoterm), so doesn't include customs clearance, duties, VAT or a retail markup.
- mschuster91 12y agoBit unrelated, but I hope someone here can help me out - couple friends and I want to develop a 3g-connected IoT appliance and we're looking for a chipset with reference design - if possible, a chipset that could power a today's high-end smartphone. Does anyone have an idea? Mediatek didn't reply to us in two weeks :/
- userbinator 12y agoIf you want to use Chinese you're going to have to learn their customs and possibly the language - MTK will just ignore you if you try asking them unless you're already a huge established company. Here's some good background reading on the culture of these ecosystems: http://www.bunniestudios.com/blog/?p=3107 http://www.bunniestudios.com/blog/?p=3107 http://www.bunniestudios.com/blog/?p=4297 http://www.bunniestudios.com/blog/?p=4297
- mschuster91 12y agoActually I don't care much about the exact CPU vendor, all I need is an Android-compatible CPU with 3G support, a datasheet and if possible a basic hardware reference design... too bad none in the team are Chinese :/
- judk 12y agoSounds like a opportunity for someone to launch a Chinese consulting company.
- programmernews3 12y agoHire some Chinese folks?
- gbl08ma 12y agoI think there is a market for honestly low-spec smartphones, as there are some interesting uses for them, for example, a IP camera (plenty of apps for that), a dedicated XMBC/Kodi remote, or a home automation controller. You can think of them as Raspberry Pis but less hacking friendly (usually the source code of these things is not easily available/buildable), that cost more but also get you two cameras, speakers and microphone, a screen and a (sometimes dual-SIM) GSM modem, which if you're lucky can do 3G. By the way, the fact that the author of the blog could not get past 2.5G could be because the phone only supports 3G in one of the SIM slots and the only SIM was inserted in the wrong slot. This is the kind of thing that can be confirmed by looking up the datasheet of that SC6825C SoC, to see if it supports 3G at all. The main problem is, before buying you can never be really sure what SoC it has... The "Timer Switch Machine" is probably a function to turn the phone on and off automatically at given times. Most Mediatek chips support this (as well as ringing alarms when off), so it'd make sense if their competitor's chips also did this.
- JosephRedfern 12y agoRegarding 'rootability', it'll almost certainly be vulnerable to towelroot: https://towelroot.com/ https://towelroot.com/
- milankragujevic 12y agoUnfortunately, my tablet can't be rooted by any method I've tried, including towelroot. DAMN YOU HUAWEI!
- JosephRedfern 12y agoWhat model is it? (and what kernel?)
- userbinator 12y agoRemovable batteries are still the norm in the low-end Chinese Android market. There's a lot of commonality and standard sizes between them too, because these are all based on the same reference designs and the manufacturers don't see much point in changing things like the dimensions of the battery since that requires effort and would make parts sourcing harder - they're not after exclusivity or vendor-lock-in. I remember the time when Mediatek was considered ultra-low-end and relatively unknown, and sellers would be selling MTK phones faked to show Qualcomm and other more "prestigious" brands of SoC. Faking MTK would be unheard of, because there wasn't anything below them (there were still fakes between the different SoCs models from them, and that still continues today.) Now that MTK has grown past that point and others have appeared below them, they've become a lot more desirable. I'd consider the fact that someone wants to fake some other brand as MTK evidence of that. The interesting thing about the MTK platform is that it's "unofficially open" - various people have leaked detailed technical information on the SoCs, which doesn't seem to bother MTK; maybe it's somewhat deliberate. Many devices are also rooted by default, and it's really easy to root one (there's no bootloader locking, and being able to read/write the entire internal storage in raw format via the official SpFlashTool means they're practically unbrickable.) This means they're quite hackable, and the low price also helps. MTK themselves won't provide any support, but a whole community has formed in its place. Perhaps the same might happen to Spreadtrum in the future, but the last time I looked there was not nearly as much information available for SC devices and rooting was not easy. The "Time Switch Machine" is scheduled power on/off. http://en.wikipedia.org/wiki/Time_switch http://en.wikipedia.org/wiki/Time_switch
- stevenjohns 12y agoI wrote an editorial on Mediatek[0] that you might be interested in. I disagree with Mediatek being "open" though, they're so closed source that they basically violate GPL. The rooting is definitely to do with company culture though, the Jiayu S3 I recently played with[1] (and has become my daily driver) actually has a root toggle in the settings menu. Great stuff. [0] http://www.neowin.net/news/the-qualcomm-reign-on-smartphones-and-tablets-is-almost-over-all-hail-mediatek http://www.neowin.net/news/the-qualcomm-reign-on-smartphones... [1] http://www.neowin.net/news/review-of-the-jiayu-s3-hands-down-the-best-smartphone-you-can-get-for-under-200 http://www.neowin.net/news/review-of-the-jiayu-s3-hands-down...
- nickpsecurity 12y agoA hardware engineer told me in discussions on chip subversion that BS like this is common in SOC's, too. He said they're so expensive to develop that vendors often include the functionality of all their chips in one design. Then, they flip a switch on the chip to enable or disable specific functionality. This means they all cost the same to make but they can give you specific features at specific prices. Hard disk makers do it too where you bought a "120GB" drive that uses same eg 1TB platter as the rest but firmware restricts user to 120GB. You can't be sure whats in it unless a company such as Chipworks tears it down piece by piece and wire by wire. Sneaky is the norm in hardware.
- ikeboy 12y ago>Hard disk makers do it too where you bought a "120GB" drive that uses same eg 1TB platter as the rest but firmware restricts user to 120GB. Why isn't some smart hacker buying these in bulk, reverse engineering the firmware to enable the full 1TB, and reselling at a 1tb price point? Would that be a good business?
- eropple 12y agoIt would be a business that requires people to trust their data to voided-warranty drives. I don't think that'd be popular.
- ikeboy 12y agoI'd buy a new 1tb HD that comes from a known manufacturer if it was much cheaper than any others I could get.
- eropple 12y agoIt wouldn't be much cheaper, though. A WD Blue 250GB on Newegg is $47. A WD Blue 1TB is $55.
- DanBC 12y agoBackblaze might be interested. If they're happy to shuck drives from external enclosures they're possibly happy to hack firmware. But I'm guessing the drive manufacturers test the platters and use faulty platters for these firmware restricted drives, like CPU makers test the cores.
- ghoul2 12y agoI have actually done a lot of development on a very similar device, based on the Spreadtrum 6821 (the famed $25 firefox phone). Its a pretty neat device - 128MB RAM, 256 MB Flash, support for upto32GB microsd card, dual SIM (EDGE only), Bluetooth, FM radio, replaceable battery, 320x480 lcd touch screen, a seperate touch "strip" which you can configure as capacitive buttons, three hardware buttons (V+,V-, power). I did a full kernel build, wrote the device driver for the LCD screen, am currently writing the driver for the SIM. I have a debian rootfs running on it - its a nifty little linux gadget. I am currently using a bunch of these as part of a linux kernel hacking tutorial for college kids. I believe there is a lot of potential for these as alternatives to RPi and its brethren for certain applications. If you try to add all the above peripherals to RPi we quickly cross $500 (of course, you would probably not do so in reality). If any one is interested in more info, message me. Shameless Plug: I am also looking for consulting ops on such and similar (I have a LOT of embedded and electronic design experience - from vague user spec to full design).
- fit2rule 12y ago"Eval" boards and systems like this have been available in the era before the raspberry-pi revolution, but rPi got a lot of hype for itself by actually shipping in large numbers. These little systems are quite capable indeed! I remember compiling the Linux kernel on a 1ghz machine with 32Megs of RAM, back in the day .. and here we are with these little machines in our pockets. Fantastic stuff to be teaching kids to use ..
- digi_owl 12y agoPi also aimed at a different market. Most eval boards was either direct order or via B2B distributors. Pi aimed at kids and education, and went into the general consumer market.
- fit2rule 12y agoThere were eval and computing-platforms aimed at kids before rPi. None had the momentum of the nascent crowd-funding movement quite so potently as the rPi.
- digi_owl 12y agoOn a side note, i find myself reminded of a TED talk. Mostly because it held a story about the lady out buying a handbag, and using her detailed knowledge of brands to get the seller to bring out ever better copies of a certain brand from storage. I wonder how much this falls within a culture of haggling. (Now lets see if i can find the right one...)