5 ms·
I seriously don't miss midi/game ports and serial and parallel ports. That said, the inability to draw power through a port that is currently hosting periphera
by Pxtl 12y ago
I seriously don't miss midi/game ports and serial and parallel ports. That said, the inability to draw power through a port that is currently hosting peripherals is a huge flaw that's really hindered smartphone docking stations.
- to3m 12y agoOne nice thing about the PC's parallel port was that it was bidirectional, relatively straightforward to program, could be programmed at a reasonable rate, and supplies/accepts a standard TTL +0V/+5V. This allows interfacing with a reasonable range of devices using a cable that's relatively simple to make up. Doing the same thing over USB is possible, but you need a microcontroller, which means more programming (i.e., more things to go wrong). But this isn't a common problem. I don't rue the passing of all the nonsense that USB replaced.
- MBCook 12y agoThe fact that the parallel port was the only high speed bidirectional port also lead to attempts to daisy chain things that usually didn't work past a device or two. So you may have an external drive or a scanner and your printer and if you were lucky you could leave it all plugged together and it would work. I also remember being short of COM ports between modems, drawing tablets, special game controllers that didn't use the joystick port, etc. Installing a serial card for additional ports was one of my first upgrades.
- tlarkworthy 12y agostill, that occasional use case is catered for with a USB breakout board, or a USB to serial. So it's not like we have really lost anything
- MBCook 12y agoIt doesn't always work. I've seen serial devices that are so picky with timing that they'll work with real serial ports but most USB->Serial adapters cause programming to fail.
- joezydeco 12y agoAnd let's not forget the 80% of USB->Serial adapters that are using counterfeit FTDI chips and barely work at all, if you can get an O/S to recognize it.
- throwketchup 12y agoExcept for the "reasonable rate" bit, which (IMHO) also includes "reasonable latency." Real UARTs can be used for, e.g., pulse-per-second inputs from GPS or atomic clocks to discipline an NTP server. That doesn't work for a USB->serial thingy (because the latency is literally three orders of magnitude worse).
- deleted 12y ago[deleted]
- ja27 12y agoIt's pretty amazing what we managed to attach to the humble parallel port. My first CD burner was a big parallel port device.
- joezydeco 12y agoIt's kind of boggling to read project blogs from people messing with Arduinos and Raspberry Pis and, after all the unpacking and setup and breadboarding and programming, they can finally light up an LED as their hello world. When we had basic PCs and parallel port you could literally take a resistor + LED, twist them together, stick it into the parallel port itself and with a line or two of MS-DOS shell script make it light up.
- DanBC 12y agoand if you replaced the LED for a speaker, and created a resistor ladder, you could squirt data out the parallel port and get sound. The NO$GB emulator used this, for example. And even though it was horrible it was authentically horrible.
- caf 12y agoThose were actually sold commercially, too - as the "Covox Speech Thing". This meant that home-made parallel port resistor ladder DAC was supported in many games.
- tedunangst 12y agoWell, it is for good reason that multi-user operating systems don't permit arbitrary processes to do port IO. That said, if all you want to do is poke the LEDs on an arm board, dd to /dev/mem as root will probably do the trick.
- superuser2 12y agoIs that really the case? You've always been able to simultaneously charge and sync your iDevice with your Mac.
- ygra 12y agoAs far as I know you can get only up to 500 mA if you specifically request it. Ports that support more (e.g. on dedicated chargers) have their data lines shorted and thus you cannot transmit anything. So you can charge your device, it just takes ages. And might even discharge slowly if you still have the screen on.
- LaikaF 12y agoThey're talking about plugging a keyboard to your phone (or tablet) while charging it.
- gambiting 12y agoThat's what the spec says, but that's not what most manufacturers are doing. With many motherboards you also get a driver that overrides the hardware limitations and provides up to 2.1Amp to a USB device, regardless of whatever you are communicating with it or not. And only a very very very small number of devices actually requires the data lines to be shortened together - PS Vita will not charge from a charger which does not have these to lines shortened together. Even the dedicated Apple USB charges don't have the data lines shortened together and pretty much everything charges from them(apart from PS Vita), so very few companies keep to the standard here.
- Pxtl 12y agoNotice the dearth of SoundDock-like devices for Android? That's what I'm referring to. Devices where the android phone/tablet device is (a) being charged, but also (b) hosting a speaker (or wired gamepads or whatever).