10 ms·
Technical Details Behind a 400Gbps NTP Amplification DDoS Attack
- rahimnathwani 13y agoIs the response to MONLIST also sent as UDP? If so, why does CloudFlare even accept those packets to IP addresses used for web hosting? Shouldn't all legitimate traffic be TCP on ports 80 and 443?
- omh 13y agoBy the time they get the chance to reject the packet it's too late. At that point it's already on their network and it's consumed their bandwidth.
- mnw21cam 13y agoThe packets have to actually reach you in order for you to filter them out. If you have a 300Gbps incoming pipe, and you're getting 300Gbps of attack traffic, then there isn't any space left in the pipe for your legitimate traffic. It doesn't matter that your router is throwing away the packets as soon as it receives them. Also, web servers might want to consult NTP servers now and again.
- alex1 13y ago> Also, web servers might want to consult NTP servers now and again. CloudFlare doesn't host web servers for their customers. They forward HTTP/HTTPS requests to origin servers outside of their network (or serve from their cache). I don't think the DDoS traffic actually hit any of their customers' origin servers (assuming origin server IPs are not known by the attackers). But yeah, it still means CloudFlare's incoming pipes being hit with 400Gbps of traffic before they're able to filter anything.
- andyjohnson0 13y agoUDP allows source and destination ports to be specified separately [1], so the attacker could just spoof the source port by setting it to 80 or 443. Unless the NTP server was specifically configured to not reply to well-known port numbers [2], this would result in the reply going to the spoofed port. [1] http://en.wikipedia.org/wiki/User_Datagram_Protocol#Packet_structure http://en.wikipedia.org/wiki/User_Datagram_Protocol#Packet_s... [2] Not sure if this is even possible
- noselasd 13y agoSure. That's what they do. The problem is you have UDP packets on port 123 coming from all over the world hammering at your door. They're politely getting dropped by firewalls, but they consume all the bandwidth in to the edge of your network, so the legitimate traffic cant get through.
- yread 13y agoDetails on the SNMP amplification http://www.nothink.org/misc/snmp_reflected.php http://www.nothink.org/misc/snmp_reflected.php
- poobrains 13y agoHow do you test a server for this attack? I want to make sure my servers don't participate.
- jadc 13y agohttp://openntpproject.org/ http://openntpproject.org/
- m-arnold 13y agoYou can use ntp client: ntpdc -c monlist 1.2.3.4 For more info see my blog post (it is related to VMware ESXi but instructions are useful for any ntpd): http://ar0.me/blog/en/posts/2014/01/howto-prevent-malicious-usage-of-vmware-esxi-in-ntp-reflection-attacks.html http://ar0.me/blog/en/posts/2014/01/howto-prevent-malicious-...
- biot 13y agoThe fine article states: You can check whether there are open NTP servers that support the MONLIST command running on your network by visiting the Open NTP Project[0]. Even if you don't think you're running an NTP server, you should check your network because you may be running one inadvertently. [0] links to http://openntpproject.org/ http://openntpproject.org/
- e12e 13y agoAs I happen to have openntpd installed on a box I attempted to test this from (in Debian that package conflicts with ntp -- which includes the ntpdc client) -- I also found this: https://github.com/sensepost/ntp_monlist https://github.com/sensepost/ntp_monlist It at least correctly identifies ntp0.ovh.net as responding -- and seems to match up with what openntpproject.org thinks... [edit: apparently this (partly) also illustrates why more people should heed the advice to "run only what you need, listen only where you must" -- or in other words, make sure that: netstat -lnutp # listening, numerical, udp, tcp, program gives essentially no output, at the very least not a lot of 0.0.0.0:x (listening on all interfaces). I'm always a little sad when people don't check that, and just throw up some complicated iptables-rules -- before checking if they're actually running some daemons that should be removed, or pointed at less public interfaces.]
- tinco 13y agoThis is offtopic, but this post was deleted some time ago, and now it's back, it was submitted by jgrahamc then also. What happened to it? Did the algorithm snip it, but did jgrahamc undelete it somehow, or a mod? Just curious about the way those things work, not complaining.
- jgrahamc 13y agoI deleted it and resubmitted it later.
- spindritf 13y agoSomewhat ironically, the large French hosting provider OVH was one of the largest sources of our attack and also a victim of a large scale NTP amplification attack around the same time. And their own semi-official ntp server supports monlist with a hefty response $ ntpdc -c monlist ntp0.ovh.net remote address port local address count m ver rstr avgint lstint =============================================================================== 10.x.x.246 123 213.251.128.249 515 3 2 0 12 0 10.x.x.248 123 213.251.128.249 396 3 2 0 7 0 10.x.x.245 123 213.251.128.249 104 3 2 0 10 0 212-x-x-101.rev.pon 123 213.251.128.249 178326 3 4 0 0 0 sw.178.x.x.248-n5.f 123 213.251.128.249 12 3 2 0 12 0 proxy.ovh.net 46863 213.251.128.249 252113 3 3 0 0 0 v1.ovh.net 50733 213.251.128.249 2443 3 3 0 0 0 a2.ovh.net 44965 213.251.128.249 3394192 3 3 0 0 0 cross.rfid.ovh.net 33352 213.251.128.249 11823 3 3 0 0 0 10.x.x.176 123 213.251.128.249 1865 3 2 0 4 0 gw6.ovh.net 123 213.251.128.249 1476 3 4 0 3 0 sw.5.x.x.248-n5.fr 123 213.251.128.249 361 3 2 0 2 0 b6.ovh.net 40862 213.251.128.249 1095 3 3 0 4 0 10.x.x.245 123 213.251.128.249 164 3 2 0 6 0 10.x.x.211 123 213.251.128.249 314567 3 2 0 4 0 . . .
- wjoe 13y agoI have a server hosted with OVH, they actually sent me a message a week or so ago advising me my server running a vulnerable version of NTP so that I could update it. I think they were even going to update it for me, but I went ahead and updated it myself anyway. This was at least a week before the news of the big DDoS attack this week, so I'm surprised their own servers still had the vulnerable config/versions.
- vidarh 13y agoI have a server with OVH, but frankly I'm considering moving elsewhere after we've now been repeatedly hit by DOS from servers at OVH. It's fairly low grade, primitive SYN-flood attack that we easily knock back within minutes each time the attacker moves elsewhere (clearly he does not have access to many server resources, or he might have actually managed to muster enough simultaneous resources to do some damage; he's right this minutes wasting resources getting a SYN-flood from some no-name Russian hosting provider dropped by our firewall at a low enough rate that I can keep an eye on it live with tcpdump). But while our colo provider was extremely responsive and started calling OVH and the other providers right away, and I also emailed evidence to OVH repeatedly, we were met with total silence. The other providers used reacted quickly. OVH let the servers continue to hammer us for days. I'm seriously considering just dropping all their net blocks in our firewalls. We have next to no legitimate traffic originating there anyway.
- powertower 13y ago> it returns a list of up to the last 600 IP addresses that last accessed the NTP server It just gives up that data to anyone that asks? Seems like a huge privacy issue. Imaging Apache or Nginx giving up the last 600 IPs it served and maybe the URLs they went to. edit: there is always the occasionally open Apache /server-status handler that leaks this type of data.
- buzzkills 13y agoWhat like this one? https://www.apache.org/server-status https://www.apache.org/server-status
- Karunamon 13y ago>It just gives up that data to anyone that asks? Seems like a huge privacy issue. I could do a nmap on the public internet and probably get a similar amount of addresses. An IP is about as "private information" as a phone number nowadays (You know, those things that get sent out en masse in yellow and white books for public consumption with real-life names next to them).
- devicenull 13y agoHuh? Those are completely different issues. So you synced your time with a server. Why would anyone else care about that? Why does it matter if someone else knows you're syncing time? This is a very different service then a web browser.
- voltagex_ 13y agoSigh. https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=733940 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=733940 FWIW, if you install the ntp package and do ntpdc -n -c monlist localhost you'll get a response but I haven't checked if it's configured by default to reject non-LAN requests.
- shawabawa3 13y agoJust tried it on my server. Works for localhost but times out remotely
- devicenull 13y agoDebian's something I checked when I first started seeing this, and their default config is not vulnerable. Being able tod this via localhost is not a problem, it's when it's open to the internet.
- alex1 13y agoFWIW, here's what I got on an Ubuntu 12.04.3 server running on my LAN. It looks like we should be fine with the defaults on Ubuntu at least. (Obviously always a good idea to use ufw/iptables to block everything you don't need exposed so you don't have to worry about stuff like this). Before installing ntp (from another host on my LAN): $ ntpdc -n -c monlist 192.168.1.50 ntpdc: read: Connection refused After installing ntp (from another host on my LAN): $ ntpdc -n -c monlist 192.168.1.50 192.168.1.50: timed out, nothing received ***Request timed out After installing ntp (from the server itself): $ ntpdc -n -c monlist localhost remote address port local address count m ver rstr avgint lstint =============================================================================== 91.189.94.4 123 192.168.1.50 1 4 4 1d0 54 54 ...
- voltagex_ 13y agoThanks, I should have checked this.
- aidos 13y agoAs far as I can tell these attacks always rely on amplification using IP Spoofing. I take it there's no way of mitigating that in a lower layer without adding some leaky abstraction or general overhead to the network? So, for example, (speaking as someone who knows nothing about these things) you could add some sort of handshake along the lines of: ntp server sees request from 1.1.1.1 (spoofed by attacker) ntp server goes to 1.1.1.1 to check that they really sent the request (sort of ack type thing) 1.1.1.1 comes back to say that it's an uninitiated request ntp server discards similar future requests for some time Obviously that would require more toing and froing, along with more white / black list tracking etc. Then again, can't all machines have sensible defaults in their firewalls to stop them from participating in such attacks? Is this not an issue for TCP? EDIT: I'm assuming it's because UDP doesn't do any checking / acknowledge stuff by default?
- devicenull 13y agoYes. And that's exactly what's been implemented in modern versions of ntpd (> 4.2.7p26, 2010/04/24... yes, 2010). The problem is: 1) No one has upgraded NTPD (and often can't, for embedded devices like IPMI controllers) 2) This can be fixed by basic configuration in older NTPD versions, but up until recently many linux distributions were shipping vulnerable configs. This particular command (monlist) is a management query, it's in no way related to serving up accurate time.
- michaelmior 13y agoAs far as I can tell, the default Ubuntu ntpd config still allows monlist. (That is, /etc/ntp.conf in saucy doesn't have disable monitor.)
- deleted 13y ago[deleted]
- dfc 13y agoWhat are the default restrictions? Is noquery enabled?
- 13y ago
- junto 13y agoI'm not much of a network guy, but is it possible for Cloudflare to just redirect that DDOS traffic back to the NTP server that sent it? This would have two benefits. Firstly the owner of the insecure NTP server is going to get a nasty message to fix their damn server, and secondly, the insecure NTP server gets taken out of the attack and becomes useless to the attacker. As a visual reference, it would be a bit like in Star Wars when Mace Windu fights Palpatine on Coruscant [1]: http://www.youtube.com/watch?v=Pk4AiCnMqpg#t=2m35s http://www.youtube.com/watch?v=Pk4AiCnMqpg#t=2m35s Eventually these server provider who have left their servers wide open will get the message when there NTP servers no longer respond? 1. http://starwars.wikia.com/wiki/Showdown_on_Coruscant http://starwars.wikia.com/wiki/Showdown_on_Coruscant
- jgrahamc 13y agoNo, we are not going to do that. Two reasons: it's a bad idea and it wouldn't help very much. Each individual NTP server is only generating a modest amount of traffic and such a response might well go unnoticed by the NTP server. Also, it would mean we'd have to generate 400Gbps back to the NTP servers creating an enormous amount of traffic.
- Florin_Andrei 13y agoFor tons of historical precedents explaining why this is a bad idea and never ends well, look up the concept of vendetta. http://en.wikipedia.org/wiki/Feud http://en.wikipedia.org/wiki/Feud
- MichaelGG 13y agoAs someone who unwittingly participated in such attacks, that's a terrible idea. I had DNS/NTP servers setup on a helper box and didn't lock it down and forgot about it. It has has multiple 1Gbps uplinks and was sending a couple hundred Mbps of traffic out. If someone started sending a couple hundred Mbps of traffic back, first, I wouldn't notice until I got a bill later on. Second, if for some reason I happened to look at that machine and saw a huge amount of incoming traffic from a single source, I'd probably just ask for it to be null-routed. I might incidentally notice that I was sending out a lot of packets, maybe. To actually get the benefits you're suggesting, CloudFlare would have to actually DDoS (spoof data from multiple IPs to the point of overwhelming the target) every participating NTP server. So on a 100Gbps attack, they'd need to send out, I dunno, 1Tbps of spoofed traffic? Not probably a wise idea. The correct way is to just contact the network abuse team. That way I get an email telling me to fix my server. And it's taken care of as quickly as possible. And the real correct way is for all ISPs to implement source filtering, but last I checked, that was laughably far from being implemented. Lots of ISPs would even take sources of private IPs and merrily forward them on.
- bhauer 13y agoGreat write-up and very helpful for those of us who, despite doing so for years, remain amateurs at running our own servers. I am among those who think the Internet would be better as a whole if more people did in fact run servers—server software would gradually become easier for us amateurs to install and run without leaving it in a state that is open to nefarious exploits. But for the time being, I appreciate it when experts take the time to explain simple counter-measures as you have done. Thank you! As far as I am aware, I am not responsible for any Internet-facing NTP servers (I certainly never set one up willingly), but it's good to have this in the back of my mind now in the off-chance that I ever do set one up. I did have one of my Windows machines used for DNS amplification. I wrote about the incident [1] at my blog because I had been a bit surprised that it was not sufficient to simply disable recursion. That much had seemed like common sense, and I thought I had been so clever and thorough in turning it off. But later I found attackers were leveraging my server's willingness to provide a list of root DNS servers in response, even with recursion disabled. I ended up deleting the list of root servers and the problem went away. (Though, to be clear, I never ran the incident by any DNS experts, so I may have misdiagnosed the whole thing.) I don't know what else I don't know about amplification attacks, so reports such as yours are helpful for people like myself who find it fun to run our own servers, but don't consider it an area of expertise. [1] http://tiamat.tsotech.com/dns-amplification http://tiamat.tsotech.com/dns-amplification
- rhizome 13y agoNot knowing about this particular vulnerability doesn't make one a pejorative amateur.
- bhauer 13y agoI am part of the group I was referring to as amateurs, and I was not using the word in a pejorative manner. I mean it literally. We, the amateurs I am speaking of, are not experts at server administration and do it either out of necessity, for fun, or out of principal. For me, it's a bit of fun and principle—I feel it's a good thing for me to more or less know how to manage a server even as I acknowledge that experts know much more about it than I. I would like to see servers demystified in general, and that's why I applaud articles such as this one that make the necessary counter-measures/workarounds plain and clear for those like myself.
- petermonsson 13y agoThis is probably a stupid question, why can't tier 1 providers (whom I suppose there are relatively few of and who I would expect to incorporate best practices) just decide to kill any NTP monlist UDP that ever crosses any of their NPUs? Why would that not solve a large part of the problem? Thank you in advance.
- erichocean 13y agoThat seems like a great idea, although it could become a slippery slope.
- kamkazemoose 13y agoI'm not sure at what layer it would be visible that the packets are ntp monlists? The basic answer is probably that the providers just aren't filtering at that level, like if you need layer7 visibility, they don't want to do dpi on any packet that crosses their boundary. Even if you don't need L7 visibility, it would still require another element of processing and filtering that they might not be interested in doing since it will almost always result in some extra cost to run.
- vidarh 13y agoCost. At typical backbone speeds there are problems enough dealing with basic routing at sufficient throughput already. "Nobody" at that level wants to also have to pattern match packets. Cisco, Juniper etc. who manufacture high end routers would certainly love it. A better alternative is to stop or limit source ip spoofing, because you can filter it on the interfaces connecting smaller providers and customers rather than the most resource-constrained routes to other backbone providers. And that's slowly happening (I'm saying, while looking at tcpdump output from a SYN attack that might very well use spoofed IPs). It's simpler because you "only" need a single lookup against a few bytes per packet per interface instead of potentially having a long list of patterns to check against the whole packet. > and who I would expect to incorporate best practices Don't bet on it. They will when it makes a big difference to them. But for many of these types of attack you'll see purely reactive reactions because it's often far cheaper (for them) vs. the costs of routing hardware etc. that can do enough processing per packet to be viable.
- 13y ago
- deleted 13y ago[deleted]
- mturmon 13y agoOT, but: Tasteful choice of album cover art for the pic at the top.
- JulianMorrison 13y agoI wonder, is QUIC vulnerable? UDP? [✓] Amplification? [✓] Spoofable? [?]
- oasisbob 13y agoQUIC datagrams should be as spoofable as anything else using UDP. The _QUIC Crypto_ design doc contains a section that covers spoofing [1], and seems to push responsibility for DDoS mitigation to the server implementation: "[...] servers may decide to relax source address restrictions dynamically. One can imagine a server that tracks the number of requests coming from different IP addresses and only demands source-address tokens when the count of “unrequited” connections exceeds a limit globally, or for a certain IP range. This may well be effective but it’s unclear whether this is globally stable. If a large number of QUIC servers implemented this strategy then a substantial mirror DDoS attack may be split across them such that the attack threshold wasn’t reached by any one server." [1] https://docs.google.com/document/d/1g5nIXAIkN_Y-7XJW5K45IblHd_L2f5LTaDUDwvZ5L6g/edit# https://docs.google.com/document/d/1g5nIXAIkN_Y-7XJW5K45IblH...
- TA-bye 13y agoAll NTP seriousness aside, this new "record-breaking" DDoS attack was only possible because CloudFlare -- after the Spamhaus attack -- upgraded and expanded their network endpoints all over the world. When the next attack hits and they have again upgraded their connections with 100Gb/s combined, they'll be able to say that there was again a new record, this time it was 500Gb/s.
- unethical_ban 13y agoWhat about a mesh network? How would they implement BCP38? If a bunch of computers are hooked together in a mesh relaying traffic in all directions, how can one do ingress filtering?
- peterwwillis 13y agoSo again we find the problem is protocols that are designed for convenience and not security. Sure, network providers could filter out bogus routes, but that's a band-aid more than a fix; the protocol is still broken from a security perspective. Nobody would stand for using rsh with host-based authentication in today's age, but for other protocols it's fine? And public services for the internet at large are great, until they become tools for the public to abuse other people. These protocols either need to be fixed to prevent abuse, or switch to using tcp (which nobody wants - so fix the protocols!)
- NelsonMinar 13y agoSome historical context on NTP monlist: it's an old debugging interface from the days of the Friendly Internet, when services were more open and people were much less worried about this kind of security. NTP daemons give up a whole lot of information if you ask them; see also the "peers" and "sysinfo" commands, for instance. Back in 1999 I used these monitoring commands to spider the NTP network, surveying some 175,000 hosts from a desktop workstation. Lots of fun! This kind of survey is much harder to do now because so many systems are locked down. http://alumni.media.mit.edu/~nelson/research/ntp-survey99/ http://alumni.media.mit.edu/~nelson/research/ntp-survey99/