15 ms·

Once-great SSD manufacturer OCZ filing for bankruptcy

195 points by shawndumas 13y ago

brownbat 13y ago
Some of this writing had been on the walls: If you're a fan of conference calls, then you probably already know that OCZ isn't in the same rosy position it has been in years past. Fortunately, its enterprise-oriented offerings are really helping the company's bottom line. But the situation is darker on the desktop. It's still in the position of needing to source NAND from the fabs manufacturing it, which means it's paying more for the flash it uses and perhaps unable to ship as many units as it'd like. But again, if you listen to earnings calls, you might already know all of this. http://www.tomshardware.com/reviews/vector-150-ssd-review,3664.html http://www.tomshardware.com/reviews/vector-150-ssd-review,36...
programminggeek 13y ago
The one thing that will kill a hardware company much faster than a software company is managing supply chain and inventory costs. I don't know the full backstory of OCZ other than seeing how the SSD segment of the storage industry has gone and the prices have obviously gone a lot lower and are more competitive. Depending on how OCZ managed their production, it would be very easy to be left holding the bag on millions of dollars of inventory. Unless you have billions in the bank, that's enough to sink a company every time.
- AmVess 13y ago
  They had a high rate of warranty replacements for several years...so much so that it cost the founder and CEO his job. It's pretty hard to make money when you have to provide two products for the price of one. It went on for so long that it was scary.
  - programminggeek 13y ago
    Well that would totally do it. High failure rate on a low margin product is nearly as bad as having too much inventory because the effect is very much the same. Example: Say you make $10 profit on a $100 product. For every replacement product, you need to sell 9 more to make your money back on the 1 failure. So, a 10% failure rate means you are basically selling the other 90% just to break even and try to stay in business. I don't know about OCZ's margins or their failure rate, but with prices squeezing downward, I'd imagine they found themselves in a situation where they maybe had a high enough margin initially that the failure rate wasn't high enough to sink them or the failures didn't occur early enough to burn through the overall margin right away. That's not a sustainable business and the only option is to get people to float you a loan that is maybe big enough to buy time to fix the quality problems if possible. In the event that it's unfixable, no amount of money can save an upside down business model.
- JohnBooty 13y ago
  In addition to OCZ's reliability issues, it must have been tough to compete on price with companies like Samsung and Intel that fab their own flash memory.
volvelle 13y ago
However, a long string of failures across several of its product lines (most notably the high-performance Vertex family) took a lot of the shine off of OCZ's name Although only anecdotal, we ditched OCZ at my last company because of their high failure rate; never risked going back. No such issue with Intel or others
highace 13y ago
I wasn't aware of it before reading into this whole story, but OCZ seemed to have quite a problem with QA. My vertex 2 barely lasted a year before it started going funny, which I put down to bad luck. But now it seems I wasn't the only one.
- fletchowns 13y ago
  They are notorious for pushing out low quality products. You really should be a more informed consumer before you buy stuff, it's not like it takes a long time to research this kind of stuff.
  - vacri 13y ago
    At the consumer level, it is quite difficult to research a lot of this kind of thing. There is so much contradictory information out there on almost every product, and trying to ferret out the right information can be a gruelling task. Go to a few review sites, have the reviews say "OCZ looks fast and good", go away with a good impression. You have to look elsewhere - on forums and the like, all of which are highly variant in quality - to get information about long-term performance. It's compounded when you have a new player or new product lines. Here in this very thread, it has several people saying "OCZ is great".
    - tanzam75 13y ago
      Well, Newegg at least makes it possible to distinguish an OCZ from an Intel/Samsung. When an OCZ drive has 3-stars and 30% of them are 1-star reviews, then you know something is wrong, compared to the Intel drive that has 4.5-stars with only 5% being 1-star. It's in the finer gradations that it gets murky. Is a 4.5-star drive really better than a 4-star drive?
Mithaldu 13y ago
> Once-great They were never great. They lied to their customers by selling hardware under the same name as previously produced hardware with cheaper components and lesser specs. They built hardware that was simply off-spec, an example being drives where the connectors were an entire millimeter shifted, such that when installed in certain machines the connectors literally could not make contact with the corresponding metal. They built drives with extreme speeds while entirely sacrificing longevity and reliability. At best they had a great marketing department that made it possible for them to peddle their crap to the public for so long. I'm glad to see them go. Edit: For those who must have numbers, return statistics: http://translate.googleusercontent.com/translate_c?depth=2&hl=it&ie=UTF8&prev=_t&rurl=translate.google.com&sl=fr&tl=en&u=http://www.hardware.fr/articles/862-7/ssd.html&usg=ALkJrhjYW5hePOLf3fELOQmp2PsCCvVSRg http://translate.googleusercontent.com/translate_c?depth=2&h... http://www.hardware.fr/articles/911-7/ssd.html http://www.hardware.fr/articles/911-7/ssd.html
- jkbyc 13y ago
  I'm not sure it's so bad. I bought my OCZ Vertex 3 Max IOPS 2.5 years ago, it's been great and I'm still happy with it. They also have had many good reviews.
  - uptown 13y ago
    Same here. Swapped out the stock drive in my MPB with a Vertex 3 in April 2011, and its been rock solid ever since with everyday-use.
    - srdev 13y ago
      I'll provide a dissenting data point. After going through 5 RMA's with Vertex 2 drives, I finally convinced them to just upgrade me to a Vertex 3, due to reports of better reliability. The Vertex 3 failed within a week. Considered the drive a lost cause, swapped in a Crucial M4 -- been rock solid ever since.
      - nickff 13y ago
mrbill 13y ago
Not surprised, their installation instructions should have had "update firmware" as a step...
- AmVess 13y ago
  The first three steps were 1)hold breath 2)cross fingers 3)pray. Always not a good thing when dealing with such a vital system component. I hated flashing the things, since there was always a real possibility of turning them into lightweight plastic bricks, and often the firmware was needed to fix show-stopping bugs. so flashing wasn't optional.
kalleboo 13y ago
In the early SSD days, I only heard two adjectives to describe OCZ drives - "fastest" and "unstable". It was inevitable the latter would catch up to them.
- frou_dh 13y ago
  When I bought my SSD, I narrowed in on Intel very quickly. I don't trust "gamer" / benchmark-focused brands at all for this kind of product.
  - eDavis698 13y ago
    Definately, Intel fabs their own NAND devices in the USA! The 320/520 also has Intel's own controller in it. I have a 320 & a 330 striped in my laptop (SATA II). The have been working flawlessly for over a year, nearly two for the 320. After my issues with Western Digital, Asus, OCZ (power supplies) and EVGA (mobo/gfx) I will never trust "gaming" hardware again. Overpriced junk. [OTOH all my Intel, MSI, and AMD hardware is still working after 6+ years in service.]
    - lmz 13y ago
      The 520 is SandForce[1], not Intel's own controller. It looks like Intel has given up on using their own controllers for their consumer SSDs, given that the 330 is also SandForce. Their own next generation controller is in their DC series SSDs marketed towards enterprise & datacenter usage. [1]: http://www.anandtech.com/show/5508/intel-ssd-520-review-cherryville-brings-reliability-to-sandforce http://www.anandtech.com/show/5508/intel-ssd-520-review-cher...
      - eDavis698 13y ago
        Thanks for the clarification, my memory was off. Link to Intel/Micron site: http://imflash.com/ http://imflash.com/
gogeek 13y ago
We had about 40 OCZ drives (Vertex 2/3/3 Max IOPS) and 6 of them failed. Our 8 Vertex 3 Max IOPS were in RAID 5 for a huge calculations which didn't require reliability but wrote a lot of data and therfore we tried to save time with this experimental RAID. The RAID was fine for about a couple of month and seeing almost 3 GB/s throughput was mindblowing. But suddenly we we saw drives randomly failing. But the drives did not completly fail, we were able to rebuild the RAID with the same hard drive. We did that a couple of times until we thought it was too much hassle and used the drives somewhere else. Now we are buying Crucial M4s and they are totally fine. In the first place a hard drive must be reliable.
- danielvinson 13y ago
  This was a firmware bug originating from the Sandforce firmware which the releases were based on - I think this one was completely fixed at least 8 months ago.
- arprocter 13y ago
  We had to replace 50+ Agility 128s as around half of them went bad within weeks of install. A year later and none of the replacement Intels have gone bad...
J_Darnley 13y ago
I remember them being something other than an SSD manufacturer. I've got a few sticks of DDR memory from them. In fact I was surprised to see them producing flash memory products lately (for a very long definition of lately).
kabdib 13y ago
In the "hardware junkies" mailing list at work (Microsoft) the OCZ drives were a periodic source of derision. "My OCZ drive failed..." / "I'm on my fourth RMA, what should I do?" "Real junkies buy Intel." (Or Samsung). And they don't buy TLC flash, either.
- ek 13y ago
  I am pleased that Microsoft has a list called "hardware junkies" :). I'd definitely be on it if I were there. Nice to know they agree with the rest of us that Samsung is the way to go nowadays, too.
  - tanzam75 13y ago
    On Newegg, OCZ SSDs would consistently have a larger number of 1-star reviews than other drives. Whereas Intel and Samsung drives would consistently have a smaller number of 1-star reviews. This was one situation where you actually got what you paid for. Yeah, you do pay more for Intel and Samsung -- but that pays for the QA engineers. If you bought OCZ, then you got to be your own QA engineer.
  - rz2k 13y ago
    The newest model is TLC, but it is likely that they figured out a way to make it last long enough for average consumers.
chrisblackwell 13y ago
This is upsetting as we are moving towards a tech world filled with only a few big brands. Will we only be able to buy SSDs from Intel or Samsung in the future? Time will tell, but I am upset that the small guy can't compete in this space anymore.
- wmf 13y ago
  I would definitely expect the market to vertically integrate so that most SSDs are made by NAND vendors. That would mostly leave us with Samsung, Intel, Micron, and Toshiba. But by the time the SSD market becomes totally boring PCM may arrive...
yeukhon 13y ago
I wonder why Toshiba wants OCZ given Toshiba is already making SSD themselves and been doing fine. As someone has already mentioned down below, OCZ to me was a RAM company before they sold first SSD. Is Toshiba trying to compete in the SSD market too? I thought Samsung and Intel were pretty much the winners in this market. If OCZ exist because of quality, what can Toshiba can get out of the acquisition? The factory? The machines? The top engineers?
- rsynnott 13y ago
  I assume just the branding, really. They did very well with the gamer market.
  - wcfields 13y ago
    /Did/ well. It's virtually known by everyone in the know that OCZ is synonymous for being unreliable.
    - boyaka 13y ago
      Well now that Toshiba runs things that should be less of a problem.
  - yeukhon 13y ago
    Probably not with SSD given the frequent failure. But maybe the RAM and PSU?
- jthol 13y ago
  I'd guess factory, brand, and patents.
brosco45 13y ago
Violin Memory is about to go under as well, less than a year after they IPOed...
- alexkus 13y ago
  Their IPO was two months ago yesterday. September 27th 2013.
  - brosco45 13y ago
    Yup, down 50% already
michaeldausmann 13y ago
I have an OCZ disk.... in the bottom of a drawer, failed.
- yskchu 13y ago
  Same, all it's good for is being a paperweight now. Their firmware is ridiculously buggy. I was using one in my primary laptop, and got hit by the bug where, if you sleep the drive too many times, the whole drive fails. Total unrecoverable data loss. Their forums are full of stories like that. Next drive, went Intel, haven't looked back since.
austinz 13y ago
I have OCZ drives in a couple of my machines, all of which are at least a year old. I'd heard bad things about OCZ, but I didn't realize their reputation was that shot. I'm wondering if I should replace my drives, or if the bathtub curve is in full effect here and I've dodged a bullet... With regards to other brands, I spent some time at the startup where I used to work putting together manufacturing PCs meant for programming serial numbers into devices, assembled from Intel SSDs, cheap Foxconn nettop computers, and the cheapest sticks of RAM we could find. I must have put together around 15 or so of those machines, and although a lot of them failed due to factory conditions/rough handling/power cuts, I don't think any of the Intel drives ever broke down.
- dpark 13y ago
  > I'm wondering if I should replace my drives, or if the bathtub curve is in full effect here\ You should back them up, but you should do that regardless of the drive manufacturer. Replacing working drives won't likely gain you anything except a lighter wallet. As you mentioned, you're "in the bathtub" now, and a newer drive is probably more likely to fail. Maintain good backups and replace the drives if/when they fail.
- TobbenTM 13y ago
  Depends on the model of the SSD. Personally, I have had 3 different Revodrives, all of which have failed. The last one I sent in, and asked to get a more reliable disk back, and I got a Vector. So far so good. Keep away from Revodrives.
bhauer 13y ago
I have avoided them since I started buying SSDs because I associate their brand with Sandforce controllers, and I associate Sandforce controllers with drive failure. Whether these associations are informed by and backed by data or not, they are among the points that steered me into the arms of Intel and Samsung for my SSD needs.
- JohnBooty 13y ago
  I associate their brand with Sandforce controllers, and I associate Sandforce controllers with drive failure. Whether these associations are informed by and backed by data or not, they are among the points that steered me into the arms of Intel and Samsung Intel has been using Sandforce controllers for a while, starting with the 520 early in 2012. I believe all their products since then have used Sandforce controllers - 330 and 335 definitely do. Source: http://www.storagereview.com/intel_ssd_520_review http://www.storagereview.com/intel_ssd_520_review http://www.anandtech.com/show/6388/intel-ssd-335-240gb-review http://www.anandtech.com/show/6388/intel-ssd-335-240gb-revie... etc All other things being equal (quality of NAND, workload, etc) the NAND on Sandforce drives will last longer because of their write compression. Of course, most drives will be replaced or retired before that point anyway. I think Sandforce had a bit of a bad rap for a while because they were the go-to controller for brands like OCZ who competed on price. Their actual silicon is great. In the hands of a manufacturer like Intel (or even OWC - not to be confused with OCZ) who puts quality and stability first, Sandforce controllers really shine.
  - skrause 13y ago
    > All other things being equal (quality of NAND, workload, etc) the NAND on Sandforce drives will last longer because of their write compression. The write compression is the reason why I associate Sandforce with "I'm being punished for using full-disk encryption". I could never convince myself to buy any drive with a controller where one of the main advertised "advantages" was completely useless for my usecase.
- tanzam75 13y ago
  Intel's consumer SSDs use Sandforce controllers. However, Intel seems to have a more thorough QA team than the other companies. They made a lot of changes to the SF-2281 firmware before they accepted it for their drives. And then after it shipped, they discovered an AES-256 bug that every other manufacturer missed for over a year.
jackmaney 13y ago
A few years ago, I went through at least two different sets of faulty OCZ RAM before exchanging for the vastly superior Corsair memory. Good riddance.
broknbottle 13y ago
good. I picked up a 30GB ssd on eBay that was NIB for like 30 bucks and it failed while installing arch linux. I contacted the seller and he happily refunded me. That was my first experience with OCZ as I have always used Intel or Kingston SSD.
anons2011 13y ago
When I got my first SSD over a year ago, I bought a 250gb OCZ Agility 3 drive. Not knowing about the very high drive failure rate. It died last week, completely without warning. Bought a Samsung SSD to replace it.
- gambiting 13y ago
  I don't understand why in the world would you spend more money on a new drive - if you only bought that drive a year ago you could have it replaced under warranty. Even if it only works for another year, it's still infinitely better(in my mind) than spending money on a new drive.
chrismcband 13y ago
I had a OCZ petrol drive that failed recently, it was just over a year old, but have had a vertex drive in another macbook pro that's still alive after 2 years. I just try and back up regularly. I'm surprised at the bankruptcy but they did have huge problems, their forums were inundated with issues.
wil421 13y ago
I'm glad I stuck with Intel ssds even though they eventually switched to SandForce I have drives with both controllers and they are both awesome. I almost bought an OCZ but they were garbage especially now Samsung is a player.
mankypro 13y ago
I own a vertex 3, never had an issue with it going on 2 years. It is used in an osx laptop that is used aggressively for devops work. Guess I got one of the good ones...

195 points by shawndumas 13y ago

Some of this writing had been on the walls: If you're a fan of conference calls, then you probably already know that OCZ isn't in the same rosy position it has been in years past. Fortunately, its enterprise-oriented offerings are really helping the company's bottom line. But the situation is darker on the desktop. It's still in the position of needing to source NAND from the fabs manufacturing it, which means it's paying more for the flash it uses and perhaps unable to ship as many units as it'd like. But again, if you listen to earnings calls, you might already know all of this. http://www.tomshardware.com/reviews/vector-150-ssd-review,3664.html http://www.tomshardware.com/reviews/vector-150-ssd-review,36...

programminggeek 13y ago

The one thing that will kill a hardware company much faster than a software company is managing supply chain and inventory costs. I don't know the full backstory of OCZ other than seeing how the SSD segment of the storage industry has gone and the prices have obviously gone a lot lower and are more competitive. Depending on how OCZ managed their production, it would be very easy to be left holding the bag on millions of dollars of inventory. Unless you have billions in the bank, that's enough to sink a company every time.

AmVess 13y ago
They had a high rate of warranty replacements for several years...so much so that it cost the founder and CEO his job. It's pretty hard to make money when you have to provide two products for the price of one. It went on for so long that it was scary.
- programminggeek 13y ago
  Well that would totally do it. High failure rate on a low margin product is nearly as bad as having too much inventory because the effect is very much the same. Example: Say you make $10 profit on a $100 product. For every replacement product, you need to sell 9 more to make your money back on the 1 failure. So, a 10% failure rate means you are basically selling the other 90% just to break even and try to stay in business. I don't know about OCZ's margins or their failure rate, but with prices squeezing downward, I'd imagine they found themselves in a situation where they maybe had a high enough margin initially that the failure rate wasn't high enough to sink them or the failures didn't occur early enough to burn through the overall margin right away. That's not a sustainable business and the only option is to get people to float you a loan that is maybe big enough to buy time to fix the quality problems if possible. In the event that it's unfixable, no amount of money can save an upside down business model.
JohnBooty 13y ago
In addition to OCZ's reliability issues, it must have been tough to compete on price with companies like Samsung and Intel that fab their own flash memory.

volvelle 13y ago

However, a long string of failures across several of its product lines (most notably the high-performance Vertex family) took a lot of the shine off of OCZ's name Although only anecdotal, we ditched OCZ at my last company because of their high failure rate; never risked going back. No such issue with Intel or others

highace 13y ago

I wasn't aware of it before reading into this whole story, but OCZ seemed to have quite a problem with QA. My vertex 2 barely lasted a year before it started going funny, which I put down to bad luck. But now it seems I wasn't the only one.

fletchowns 13y ago
They are notorious for pushing out low quality products. You really should be a more informed consumer before you buy stuff, it's not like it takes a long time to research this kind of stuff.
- vacri 13y ago
  At the consumer level, it is quite difficult to research a lot of this kind of thing. There is so much contradictory information out there on almost every product, and trying to ferret out the right information can be a gruelling task. Go to a few review sites, have the reviews say "OCZ looks fast and good", go away with a good impression. You have to look elsewhere - on forums and the like, all of which are highly variant in quality - to get information about long-term performance. It's compounded when you have a new player or new product lines. Here in this very thread, it has several people saying "OCZ is great".
  - tanzam75 13y ago
    Well, Newegg at least makes it possible to distinguish an OCZ from an Intel/Samsung. When an OCZ drive has 3-stars and 30% of them are 1-star reviews, then you know something is wrong, compared to the Intel drive that has 4.5-stars with only 5% being 1-star. It's in the finer gradations that it gets murky. Is a 4.5-star drive really better than a 4-star drive?

Mithaldu 13y ago

> Once-great They were never great. They lied to their customers by selling hardware under the same name as previously produced hardware with cheaper components and lesser specs. They built hardware that was simply off-spec, an example being drives where the connectors were an entire millimeter shifted, such that when installed in certain machines the connectors literally could not make contact with the corresponding metal. They built drives with extreme speeds while entirely sacrificing longevity and reliability. At best they had a great marketing department that made it possible for them to peddle their crap to the public for so long. I'm glad to see them go. Edit: For those who must have numbers, return statistics: http://translate.googleusercontent.com/translate_c?depth=2&hl=it&ie=UTF8&prev=_t&rurl=translate.google.com&sl=fr&tl=en&u=http://www.hardware.fr/articles/862-7/ssd.html&usg=ALkJrhjYW5hePOLf3fELOQmp2PsCCvVSRg http://translate.googleusercontent.com/translate_c?depth=2&h... http://www.hardware.fr/articles/911-7/ssd.html http://www.hardware.fr/articles/911-7/ssd.html

jkbyc 13y ago
I'm not sure it's so bad. I bought my OCZ Vertex 3 Max IOPS 2.5 years ago, it's been great and I'm still happy with it. They also have had many good reviews.
- uptown 13y ago
  Same here. Swapped out the stock drive in my MPB with a Vertex 3 in April 2011, and its been rock solid ever since with everyday-use.
  - srdev 13y ago
    I'll provide a dissenting data point. After going through 5 RMA's with Vertex 2 drives, I finally convinced them to just upgrade me to a Vertex 3, due to reports of better reliability. The Vertex 3 failed within a week. Considered the drive a lost cause, swapped in a Crucial M4 -- been rock solid ever since.
    - nickff 13y ago

mrbill 13y ago

Not surprised, their installation instructions should have had "update firmware" as a step...

AmVess 13y ago
The first three steps were 1)hold breath 2)cross fingers 3)pray. Always not a good thing when dealing with such a vital system component. I hated flashing the things, since there was always a real possibility of turning them into lightweight plastic bricks, and often the firmware was needed to fix show-stopping bugs. so flashing wasn't optional.

kalleboo 13y ago

In the early SSD days, I only heard two adjectives to describe OCZ drives - "fastest" and "unstable". It was inevitable the latter would catch up to them.

frou_dh 13y ago
When I bought my SSD, I narrowed in on Intel very quickly. I don't trust "gamer" / benchmark-focused brands at all for this kind of product.
- eDavis698 13y ago
  Definately, Intel fabs their own NAND devices in the USA! The 320/520 also has Intel's own controller in it. I have a 320 & a 330 striped in my laptop (SATA II). The have been working flawlessly for over a year, nearly two for the 320. After my issues with Western Digital, Asus, OCZ (power supplies) and EVGA (mobo/gfx) I will never trust "gaming" hardware again. Overpriced junk. [OTOH all my Intel, MSI, and AMD hardware is still working after 6+ years in service.]
  - lmz 13y ago
    The 520 is SandForce[1], not Intel's own controller. It looks like Intel has given up on using their own controllers for their consumer SSDs, given that the 330 is also SandForce. Their own next generation controller is in their DC series SSDs marketed towards enterprise & datacenter usage. [1]: http://www.anandtech.com/show/5508/intel-ssd-520-review-cherryville-brings-reliability-to-sandforce http://www.anandtech.com/show/5508/intel-ssd-520-review-cher...
    - eDavis698 13y ago
      Thanks for the clarification, my memory was off. Link to Intel/Micron site: http://imflash.com/ http://imflash.com/

gogeek 13y ago

We had about 40 OCZ drives (Vertex 2/3/3 Max IOPS) and 6 of them failed. Our 8 Vertex 3 Max IOPS were in RAID 5 for a huge calculations which didn't require reliability but wrote a lot of data and therfore we tried to save time with this experimental RAID. The RAID was fine for about a couple of month and seeing almost 3 GB/s throughput was mindblowing. But suddenly we we saw drives randomly failing. But the drives did not completly fail, we were able to rebuild the RAID with the same hard drive. We did that a couple of times until we thought it was too much hassle and used the drives somewhere else. Now we are buying Crucial M4s and they are totally fine. In the first place a hard drive must be reliable.

danielvinson 13y ago
This was a firmware bug originating from the Sandforce firmware which the releases were based on - I think this one was completely fixed at least 8 months ago.
arprocter 13y ago
We had to replace 50+ Agility 128s as around half of them went bad within weeks of install. A year later and none of the replacement Intels have gone bad...

J_Darnley 13y ago

I remember them being something other than an SSD manufacturer. I've got a few sticks of DDR memory from them. In fact I was surprised to see them producing flash memory products lately (for a very long definition of lately).

kabdib 13y ago

In the "hardware junkies" mailing list at work (Microsoft) the OCZ drives were a periodic source of derision. "My OCZ drive failed..." / "I'm on my fourth RMA, what should I do?" "Real junkies buy Intel." (Or Samsung). And they don't buy TLC flash, either.

ek 13y ago
I am pleased that Microsoft has a list called "hardware junkies" :). I'd definitely be on it if I were there. Nice to know they agree with the rest of us that Samsung is the way to go nowadays, too.
- tanzam75 13y ago
  On Newegg, OCZ SSDs would consistently have a larger number of 1-star reviews than other drives. Whereas Intel and Samsung drives would consistently have a smaller number of 1-star reviews. This was one situation where you actually got what you paid for. Yeah, you do pay more for Intel and Samsung -- but that pays for the QA engineers. If you bought OCZ, then you got to be your own QA engineer.
- rz2k 13y ago
  The newest model is TLC, but it is likely that they figured out a way to make it last long enough for average consumers.

chrisblackwell 13y ago

This is upsetting as we are moving towards a tech world filled with only a few big brands. Will we only be able to buy SSDs from Intel or Samsung in the future? Time will tell, but I am upset that the small guy can't compete in this space anymore.

wmf 13y ago
I would definitely expect the market to vertically integrate so that most SSDs are made by NAND vendors. That would mostly leave us with Samsung, Intel, Micron, and Toshiba. But by the time the SSD market becomes totally boring PCM may arrive...

yeukhon 13y ago

I wonder why Toshiba wants OCZ given Toshiba is already making SSD themselves and been doing fine. As someone has already mentioned down below, OCZ to me was a RAM company before they sold first SSD. Is Toshiba trying to compete in the SSD market too? I thought Samsung and Intel were pretty much the winners in this market. If OCZ exist because of quality, what can Toshiba can get out of the acquisition? The factory? The machines? The top engineers?

rsynnott 13y ago
I assume just the branding, really. They did very well with the gamer market.
- wcfields 13y ago
  /Did/ well. It's virtually known by everyone in the know that OCZ is synonymous for being unreliable.
  - boyaka 13y ago
    Well now that Toshiba runs things that should be less of a problem.
- yeukhon 13y ago
  Probably not with SSD given the frequent failure. But maybe the RAM and PSU?
jthol 13y ago
I'd guess factory, brand, and patents.

brosco45 13y ago

Violin Memory is about to go under as well, less than a year after they IPOed...

alexkus 13y ago
Their IPO was two months ago yesterday. September 27th 2013.
- brosco45 13y ago
  Yup, down 50% already

michaeldausmann 13y ago

I have an OCZ disk.... in the bottom of a drawer, failed.

yskchu 13y ago
Same, all it's good for is being a paperweight now. Their firmware is ridiculously buggy. I was using one in my primary laptop, and got hit by the bug where, if you sleep the drive too many times, the whole drive fails. Total unrecoverable data loss. Their forums are full of stories like that. Next drive, went Intel, haven't looked back since.

austinz 13y ago

I have OCZ drives in a couple of my machines, all of which are at least a year old. I'd heard bad things about OCZ, but I didn't realize their reputation was that shot. I'm wondering if I should replace my drives, or if the bathtub curve is in full effect here and I've dodged a bullet... With regards to other brands, I spent some time at the startup where I used to work putting together manufacturing PCs meant for programming serial numbers into devices, assembled from Intel SSDs, cheap Foxconn nettop computers, and the cheapest sticks of RAM we could find. I must have put together around 15 or so of those machines, and although a lot of them failed due to factory conditions/rough handling/power cuts, I don't think any of the Intel drives ever broke down.

dpark 13y ago
> I'm wondering if I should replace my drives, or if the bathtub curve is in full effect here\ You should back them up, but you should do that regardless of the drive manufacturer. Replacing working drives won't likely gain you anything except a lighter wallet. As you mentioned, you're "in the bathtub" now, and a newer drive is probably more likely to fail. Maintain good backups and replace the drives if/when they fail.
TobbenTM 13y ago
Depends on the model of the SSD. Personally, I have had 3 different Revodrives, all of which have failed. The last one I sent in, and asked to get a more reliable disk back, and I got a Vector. So far so good. Keep away from Revodrives.

bhauer 13y ago

I have avoided them since I started buying SSDs because I associate their brand with Sandforce controllers, and I associate Sandforce controllers with drive failure. Whether these associations are informed by and backed by data or not, they are among the points that steered me into the arms of Intel and Samsung for my SSD needs.

JohnBooty 13y ago
I associate their brand with Sandforce controllers, and I associate Sandforce controllers with drive failure. Whether these associations are informed by and backed by data or not, they are among the points that steered me into the arms of Intel and Samsung Intel has been using Sandforce controllers for a while, starting with the 520 early in 2012. I believe all their products since then have used Sandforce controllers - 330 and 335 definitely do. Source: http://www.storagereview.com/intel_ssd_520_review http://www.storagereview.com/intel_ssd_520_review http://www.anandtech.com/show/6388/intel-ssd-335-240gb-review http://www.anandtech.com/show/6388/intel-ssd-335-240gb-revie... etc All other things being equal (quality of NAND, workload, etc) the NAND on Sandforce drives will last longer because of their write compression. Of course, most drives will be replaced or retired before that point anyway. I think Sandforce had a bit of a bad rap for a while because they were the go-to controller for brands like OCZ who competed on price. Their actual silicon is great. In the hands of a manufacturer like Intel (or even OWC - not to be confused with OCZ) who puts quality and stability first, Sandforce controllers really shine.
- skrause 13y ago
  > All other things being equal (quality of NAND, workload, etc) the NAND on Sandforce drives will last longer because of their write compression. The write compression is the reason why I associate Sandforce with "I'm being punished for using full-disk encryption". I could never convince myself to buy any drive with a controller where one of the main advertised "advantages" was completely useless for my usecase.
tanzam75 13y ago
Intel's consumer SSDs use Sandforce controllers. However, Intel seems to have a more thorough QA team than the other companies. They made a lot of changes to the SF-2281 firmware before they accepted it for their drives. And then after it shipped, they discovered an AES-256 bug that every other manufacturer missed for over a year.

jackmaney 13y ago

A few years ago, I went through at least two different sets of faulty OCZ RAM before exchanging for the vastly superior Corsair memory. Good riddance.

broknbottle 13y ago

good. I picked up a 30GB ssd on eBay that was NIB for like 30 bucks and it failed while installing arch linux. I contacted the seller and he happily refunded me. That was my first experience with OCZ as I have always used Intel or Kingston SSD.

anons2011 13y ago

When I got my first SSD over a year ago, I bought a 250gb OCZ Agility 3 drive. Not knowing about the very high drive failure rate. It died last week, completely without warning. Bought a Samsung SSD to replace it.

gambiting 13y ago
I don't understand why in the world would you spend more money on a new drive - if you only bought that drive a year ago you could have it replaced under warranty. Even if it only works for another year, it's still infinitely better(in my mind) than spending money on a new drive.

chrismcband 13y ago

I had a OCZ petrol drive that failed recently, it was just over a year old, but have had a vertex drive in another macbook pro that's still alive after 2 years. I just try and back up regularly. I'm surprised at the bankruptcy but they did have huge problems, their forums were inundated with issues.

wil421 13y ago

I'm glad I stuck with Intel ssds even though they eventually switched to SandForce I have drives with both controllers and they are both awesome. I almost bought an OCZ but they were garbage especially now Samsung is a player.

mankypro 13y ago

I own a vertex 3, never had an issue with it going on 2 years. It is used in an osx laptop that is used aggressively for devops work. Guess I got one of the good ones...