5 ms·

And this is why I'm using Zed today. I'm deadly serious. I was a huge proponent of VSCode at first but I've soured on it, and now I don't want my workflow to de

And this is why I'm using Zed today. I'm deadly serious. I was a huge proponent of VSCode at first but I've soured on it, and now I don't want my workflow to depend on it in any way. Awesome software, but I don't trust the upstream org further than I must.

lysace 2y ago
Still using VSCode, but you kind of know that's it's going to go sour eventually. It is Microsoft. :/ I figure e.g. emacs will always be there when that happens. All I need is a Github Copilot clone and a good code search feature. Oh and automatic reloads of open but unchanged buffers when switching between git branches. Oh and the ssh remote extension.
- znpy 2y ago
  Emacs user here, have used vscode in the past. Yep, vscode is more intuitive. However emacs is mostly the kind of thing you dedicate a couple of months of discomfort and enjoy for the rest of your life. Quite literally. Spending some money on the “mastering emacs” book (https://www.masteringemacs.org/ https://www.masteringemacs.org/) is worth imho. Bonus point: little by little you start enjoying doing more stuff in emacs. It’s a meme, but it’s true.
  - lysace 2y ago
    I spent 25 years using emacs before vscode (1997 to 2022-ish). I didn't go deep, I mostly just enjoyed the core parts of emacs + ccmode. I don't enjoy LISP but I still enjoy emacs, if that makes any sense. MS made some very real and very usable innovations. Emacs hackers/maintainers would be wise to copy them, like I'm sure Microsoft copied things from emacs. It's a bit like the UI aspect of the browser wars. Everyone wins when good things are cloned and then iteratively improved upon.
    - datadrivenangel 2y ago
      What are the ways that VScode is better than Emacs?
      - lysace 2y ago
        I listed my favorites above. Generalizing it: Having smart people who really understand UX helps a lot with minimizing those months of pain before the payoff.
      - baq 2y ago
        vscode does three things extremely well: defaults, defaults and defaults. The most important ‘you just need M-x do-whatever after installing the whatever-doer package’ is supported out of the box (no details on purpose, try running emacs or vim without any config and compare to a clean fresh install of vscode).
        znpy 2y ago
        Re: defaults. Sometimes i wonder if it’s worth giving those new emacs distributions a shot. I’m thinking about spacemacs or doom emacs. They look cool but so far i’ve been okay with stock emacs.
        qubitcoder 2y ago
        I used Spacemacs for years and recommend it to others. It was fantastic in the early days, but the stability seems to have diminished. I encountered more bugs over time that I'd have to troubleshoot and fix myself. I switched to Doom Emacs a couple of years ago. It's well-maintained with regular updates, fantastic language support, and lightning fast. The CLI tooling is also nice (i.e., you can run 'doom upgrade' to update everything, or 'doom doctor' if you encounter an issue). It's the closest equivalent to VS Code in terms of working out of the box. Not to mention the advantages of Emacs with Vim keybindings. There is a learning curve, but the GitHub documentation is excellent. Adding support for Ruby on Rails development, for example, is as simple as uncommenting '(ruby +rails +lsp)' line in the '~/.config/init.el' file, and then running 'doom sync'. There's a long list of supported languages and tooling [0]. [0] https://github.com/doomemacs/doomemacs/blob/master/static/init.example.el https://github.com/doomemacs/doomemacs/blob/master/static/in...
  - kstrauser 2y ago
    I second all this. I'm using Zed today, but I was using Emacs for 20 years, then Sublime/VSCode/etc. for a few, and now Zed. If it disappears, I'm going right back to Emacs without a moment's hesitation. And "Mastering Emacs" is brilliant.
  - rurban 2y ago
    And with copilot.el you get access to all models, not just some. I'm using Claude
  - pjmlp 2y ago
    I dedicated my time between 1995 and 2005 as my main UNIX editor, and don't miss installing Emacs.
    - kstrauser 2y ago
      It’s gotten way more ergonomic, BTW. Even if you treat it as a toolkit to build your own editor, the building blocks are much nicer than they were back then.
      - pjmlp 2y ago
        Thing is, I don't want to build my editor, I want to live the dream of Xerox PARC workstations, and that is what IDEs are for. I had to make Emacs my go to editor in UNIX, because in those days there were hardly any alternatives, IDEs only started to be taken seriously on UNIX around 2000. Even James Gosling, one of influencial people in the Emacs history says its time is now passed and he rather use Netbeans, https://www.youtube.com/watch?v=Mv5Q39MuTvk https://www.youtube.com/watch?v=Mv5Q39MuTvk
        DonHopkins 2y ago
        Speaking of old obsolete versions of Gosling Emacs, Lars Brinkhoff just posted this source code for UniPress Emacs 2.20 he got from from Hans Hübner! That's the version we called NeMACS, with support for NeWS (Gosling's PostScript based window system), tabbed windows and pie menus, etc: https://github.com/larsbrinkhoff/emacs-history/tree/sources/Hans%20H%C3%BCbner https://github.com/larsbrinkhoff/emacs-history/tree/sources/... So the answer to DVRC's ("Adopter of orphaned technologies") question on June 3, 2023, is yes, finally! HCIL Demo - HyperTIES Authoring with UniPress Emacs on NeWS https://www.youtube.com/watch?v=hhmU2B79EDU https://www.youtube.com/watch?v=hhmU2B79EDU https://news.ycombinator.com/item?id=36166642 https://news.ycombinator.com/item?id=36166642 DonHopkins on June 2, 2023 | parent | context | favorite | on: Brave Browser introduces vertical tabs UniPress Emacs for NeWS in 1988: Scriptable GUI, tabbed windows, pie menus, hypermedia authoring tool for HyperTIES browser. Emacs served as an IDE with tabbed window and pie menus, for interactively editing, viewing, and navigating HyperTIES markup language documents, graphics, and interactive PostScript "applets". HyperTIES browser and Gosling Emacs authoring tool with pie menus on the NeWS window system https://en.wikipedia.org/wiki/Tab_(interface)#/media/File:HyperTIESAuthoring.jpg https://en.wikipedia.org/wiki/Tab_(interface)#/media/File:Hy... >HyperTIES is an early hypermedia browser developed under the direction of Dr. Ben Shneiderman at the University of Maryland Human Computer Interaction Lab. This screen snapshot shows the HyperTIES authoring tool (built with UniPress's Gosling Emacs text editor, written in MockLisp) and browser (built with the NeWS window system, written in PostScript, C and Forth). The tabbed windows and pie menu reusable components were developed by Don Hopkins, who also developed the NeWS Emacs (NeMACS) and HyperTIES user interfaces. (Sorry about the quality -- this is a scan of an old screen dump printed by a laser printer.) Emacs provides the pie menus you see popped up in the illustration (Articulate, Edit, New (Storyboard, Link, Picture, Target), Define) that control the HyperTIES browser from the custom text editing mode of HyperTIES storyboards (like web pages), which the HyperTIES browser (in the background, which emacs controls in a sub-process) formats and displays. HyperTIES also uses pie menus for navigation and in interactive "applets" programmed in PostScript. DVRC on June 3, 2023 [–] Do any version of UniPress Emacs (that support the NeWS driver) or NeMacs survive? https://news.ycombinator.com/item?id=31989423 https://news.ycombinator.com/item?id=31989423 I wrote the following description of how NeWS relates to modern web browsers and "AJAX" in the NeWS article on Wikipedia, and I also worked on TNT (The NeWS Toolkit) at Sun: https://en.wikipedia.org/wiki/NeWS https://en.wikipedia.org/wiki/NeWS >NeWS was architecturally similar to what is now called AJAX, except that NeWS coherently: >- used PostScript code instead of JavaScript for programming. >- used PostScript graphics instead of DHTML and CSS for rendering. >- used PostScript data instead of XML and JSON for data representation. [...] HyperTIES Emacs Authoring Tool MockLisp code (Yet Another HyperTIES Implementation, This Time In Emacs): http://donhopkins.com/home/ties/yahtittie.ml http://donhopkins.com/home/ties/yahtittie.ml https://donhopkins.com/home/ties/ https://donhopkins.com/home/ties/ HyperTIES Discussions from Hacker News: https://donhopkins.medium.com/hyperties-discussions-from-hacker-news-937d156f0330 https://donhopkins.medium.com/hyperties-discussions-from-hac...
- kstrauser 2y ago
  > All I need is a Github Copilot clone I'm using https://github.com/copilot-emacs/copilot.el https://github.com/copilot-emacs/copilot.el > good code search feature. project-find-regexp is a nice start. > Oh and automatic reloads of open but unchanged buffers when switching between git branches. (global-auto-revert-mode t) > Oh and the ssh remote extension. I haven't compared it to Tramp.
- bryanlarsen 2y ago
  > All I need is a Github Copilot clone or you could just use copilot through copilot.el > and a good code search feature. Like through helm or ivy? > Oh and automatic reloads of open but unchanged buffers when switching between git branches. My emacs does that, and I don't think I did anything special to get it. > Oh and the ssh remote extension. like tramp?
- dharmab 2y ago
  You're almost describing Zed to a T.
  - lysace 2y ago
    Just played with it. You're right. Thanks!
- baq 2y ago
  vscode find in files is literally ripgrep FYI.
- pjmlp 2y ago
  Many of us are perfectly fine with commercial software, we have been into the other side and got tired of the religion.
  - mschild 2y ago
    I think a lot of people don't have a problem with commercial software, but rather with the disingenuous behavior that some companies display. VSCode was/is often touted as open source and Microsoft are using it to present themselves as community loving until MS sees an opportunity to extract some money/hinder the competition. In comparison, Jetbrains is transparent with their offerings and what you get. There is in my opinion a clear difference in how they operate and how they are perceived.
    - pjmlp 2y ago
      You mean transparent like the way they added AI to their products?
      - mschild 2y ago
        I'm unaware of how they added it. Was there controversy around it?
        pjmlp 2y ago
        Yes, initially it was a pain to disable, a big no-no for many customers. https://devclass.com/2024/03/11/jetbrains-bows-to-user-pressure-and-unbundles-ai-assistant-in-new-intellij-idea-beta/ https://devclass.com/2024/03/11/jetbrains-bows-to-user-press...
        mschild 2y ago
        Thanks for linking it. Obviously not a great approach. I'd still look at Jetbrains more favorably than most other tech companies. Clearly not perfect by any means. To be fair to them, they seemed to listen to the feedback and provided it as a separate plugin.
- globular-toast 2y ago
  Warning, though: the older you get, the harder it will be to learn emacs. The best time to learn it is yesterday. The second best is today.
rs186 2y ago
So how do you get intellisense and debug C++ in Zed?
- LoganDark 2y ago
  Zed uses open-source language servers. It just doesn't rely on proprietary extensions. I actually worked a bunch on the language server logic in Zed trying to get a bunch of it to work on Windows. All I have to say about that is: ugh.
- yoyohello13 2y ago
  clangd is an LSP. You can use it in any editor with LSP support https://clangd.llvm.org/ https://clangd.llvm.org/
  - hu3 2y ago
    Why isn't Cursor using this by default then?
    - dharmab 2y ago
      I don't think MSVC provides an LSP, so the VSC C++ extension uses proprietary Intellisense features instead. LLVM provides their own extension to use the clangd LSP: https://marketplace.visualstudio.com/items?itemName=llvm-vs-code-extensions.vscode-clangd https://marketplace.visualstudio.com/items?itemName=llvm-vs-... In short: Corporate politics and the Cursor team taking the path of least resistance.
- dharmab 2y ago
  There's a great doc on exactly how Zed handles syntax and intellisense-style completions: https://zed.dev/docs/configuring-languages https://zed.dev/docs/configuring-languages Debugging isn't in yet, but is actively being worked on and planned for public release before 1.0: https://github.com/zed-industries/zed/issues/5065 https://github.com/zed-industries/zed/issues/5065, there's an active channel in their Discord discussing the development of the feature.
hobs 2y ago
Reminds when I excited to see Azure Data Studio adding Postgres support, but it was actually a binary extension with no ability to fix or change anything and no way for other useful databases to extend and use the functionality; they had spent all the time and effort to make sure nobody could do something like it but them. Weird, ADS is dead and nobody spent any time on it, I wonder why.
notnmeyer 2y ago
zed is veerrrry good. i really appreciate the clean ui compared to vscode and its ilk. don’t love the pricing they just announced though. i don’t mind paying for my tools, but it not being unlimited scares me off slightly.
- kstrauser 2y ago
  Agreed, but at least that's an optional feature you can choose to pay for if you want to. And if that changes, I'll drop it and head back to a Free editor.
- dharmab 2y ago
  I think it's totally fair for them to charge for an optional feature that requires a cloud service. And if you don't like their pricing you can use a different provider, including self-hosted ones.
  - notnmeyer 2y ago
    absolutely agree
- 3eb7988a1663 2y ago
  Just installed it, but it put a terrible taste in my mouth where the IDE has a hamburger menu instead of showing the file menu. This is meant to be a professional, technical application used on a desktop. Glad some designer made 150 pixels look clean instead of busy, but now I am reduced to an extra click any time I need to do something. Minor grievance, sure, but it it not an encouraging sign for their priorities.
eviks 2y ago
Does Zed have a comparable C++ extension?
- dharmab 2y ago
  Zed uses tree-sitter and LSP; most popular languages do not require extensions, and extensions for niche languages are shockingly easy to write. Literally 100-300 lines of Rust boilerplate and around 300 lines of config boilerplate, with minimal maintenance/upkeep. https://zed.dev/docs/languages/cpp https://zed.dev/docs/languages/cpp
  - wolvesechoes 2y ago
    Many words to state that it doesn't.
    - dharmab 2y ago
      Many words to explain that it doesn't need one, as you can see by clicking that link.
    - mort96 2y ago
      No idea why they worded it the way they did. But the answer is: yes, Zed has something comparable, using clangd as a C and C++ LSP server.
hnlmorg 2y ago
I’ve just installed Zed based on your recommendation and I’m already impressed. It’s fast, the interface is distraction free and it already has support for all the languages I use regularly. Even Terraform support, which is notoriously hard to get right, is better than the current “best” in VSCode. Thanks for the recommendation
- kstrauser 2y ago
  Glad you like it! It’s a proper native app (no Electron) and super responsive. I truly enjoy using it. And yes, the language support (via Treesitter and LSPs) is fantastic.
int_19h 2y ago
I actually worked on VSCode (Python support specifically) at Microsoft in the past, and seeing this kind of thing frustrates me to no end. The worst part is all the VSCode is still promoted to developers as open source, even though official extensions increasingly aren't, with bits and pieces gradually replaced with closed code. It's not that closed source is necessarily bad, but when F/OSS popularity is milked for marketing purposes while stuff like this happens, it just feels very wrong. If you want to be closed source for reasons, fine, but be honest and upfront about it.
- VyseofArcadia 2y ago
  There's a special place in hell for orgs that do this. Google has been doing the same thing with Android. IIRC Apple at least has always been fairly clear and consistent with what bits of its software are open and what bits aren't. To my knowledge they haven't been breaking off chunks of Darwin and closing them. (Although if I'm wrong do correct me.)
exceptione 2y ago
Even better: Theia. It supports most vscode extensions right out of the box. https://theia-ide.org/ https://theia-ide.org/
- deleted 2y ago
  [deleted]
- 0rzech 2y ago
  Supports without auto updating them and along with other annoyances: https://news.ycombinator.com/item?id=43793016 https://news.ycombinator.com/item?id=43793016 . VSCodium [1] has much better UX than Theia IDE, IMHO. [1] https://vscodium.com/ https://vscodium.com/
  - bobajeff 2y ago
    Yeah I've just tried Theia. Vscodium is still the way to go. I just wish they had answers for issues like running extensions that depend on cpptools. I managed to work around it by installing an old version of cpptools from before the nag prompt that checks you're running it in vscode was added. Zed is almost a good solution but like most they are missing most of vscodes markdown editing features*. Also, right now there's no way to hide the sign in and ai buttons from the UI. * https://code.visualstudio.com/Docs/languages/markdown https://code.visualstudio.com/Docs/languages/markdown
sureglymop 2y ago
Zed is nice but I still prefer vs codes configuration scheme. Was working on a web/frontend project a while ago and had honestly a very hard time to set up Zed to do everything from formatting to linting and syntax highlighting correctly. Meanwhile in vscode I had to install 3 extensions, enable them for the workspace and they were already aware of each other and seamlessly worked together. I also think it's a mixed opportunity not to allow for something like Lua or a Lisp to configure Zed in. It's very promising but I'm not willing to switch just yet.
bitbasher 2y ago
So, you hopped from one walled garden to another? I don't mean that in a mean way, but have you considered another editor that is more open?
sitkack 2y ago
Zed is a for profit company, aren't they just going to go down the same route?

lysace 2y ago

Still using VSCode, but you kind of know that's it's going to go sour eventually. It is Microsoft. :/ I figure e.g. emacs will always be there when that happens. All I need is a Github Copilot clone and a good code search feature. Oh and automatic reloads of open but unchanged buffers when switching between git branches. Oh and the ssh remote extension.

znpy 2y ago
Emacs user here, have used vscode in the past. Yep, vscode is more intuitive. However emacs is mostly the kind of thing you dedicate a couple of months of discomfort and enjoy for the rest of your life. Quite literally. Spending some money on the “mastering emacs” book (https://www.masteringemacs.org/ https://www.masteringemacs.org/) is worth imho. Bonus point: little by little you start enjoying doing more stuff in emacs. It’s a meme, but it’s true.
- lysace 2y ago
  I spent 25 years using emacs before vscode (1997 to 2022-ish). I didn't go deep, I mostly just enjoyed the core parts of emacs + ccmode. I don't enjoy LISP but I still enjoy emacs, if that makes any sense. MS made some very real and very usable innovations. Emacs hackers/maintainers would be wise to copy them, like I'm sure Microsoft copied things from emacs. It's a bit like the UI aspect of the browser wars. Everyone wins when good things are cloned and then iteratively improved upon.
  - datadrivenangel 2y ago
    What are the ways that VScode is better than Emacs?
    - lysace 2y ago
      I listed my favorites above. Generalizing it: Having smart people who really understand UX helps a lot with minimizing those months of pain before the payoff.
    - baq 2y ago
      vscode does three things extremely well: defaults, defaults and defaults. The most important ‘you just need M-x do-whatever after installing the whatever-doer package’ is supported out of the box (no details on purpose, try running emacs or vim without any config and compare to a clean fresh install of vscode).
      - znpy 2y ago
        Re: defaults. Sometimes i wonder if it’s worth giving those new emacs distributions a shot. I’m thinking about spacemacs or doom emacs. They look cool but so far i’ve been okay with stock emacs.
        qubitcoder 2y ago
        I used Spacemacs for years and recommend it to others. It was fantastic in the early days, but the stability seems to have diminished. I encountered more bugs over time that I'd have to troubleshoot and fix myself. I switched to Doom Emacs a couple of years ago. It's well-maintained with regular updates, fantastic language support, and lightning fast. The CLI tooling is also nice (i.e., you can run 'doom upgrade' to update everything, or 'doom doctor' if you encounter an issue). It's the closest equivalent to VS Code in terms of working out of the box. Not to mention the advantages of Emacs with Vim keybindings. There is a learning curve, but the GitHub documentation is excellent. Adding support for Ruby on Rails development, for example, is as simple as uncommenting '(ruby +rails +lsp)' line in the '~/.config/init.el' file, and then running 'doom sync'. There's a long list of supported languages and tooling [0]. [0] https://github.com/doomemacs/doomemacs/blob/master/static/init.example.el https://github.com/doomemacs/doomemacs/blob/master/static/in...
- kstrauser 2y ago
  I second all this. I'm using Zed today, but I was using Emacs for 20 years, then Sublime/VSCode/etc. for a few, and now Zed. If it disappears, I'm going right back to Emacs without a moment's hesitation. And "Mastering Emacs" is brilliant.
- rurban 2y ago
  And with copilot.el you get access to all models, not just some. I'm using Claude
- pjmlp 2y ago
  I dedicated my time between 1995 and 2005 as my main UNIX editor, and don't miss installing Emacs.
  - kstrauser 2y ago
    It’s gotten way more ergonomic, BTW. Even if you treat it as a toolkit to build your own editor, the building blocks are much nicer than they were back then.
    - pjmlp 2y ago
      Thing is, I don't want to build my editor, I want to live the dream of Xerox PARC workstations, and that is what IDEs are for. I had to make Emacs my go to editor in UNIX, because in those days there were hardly any alternatives, IDEs only started to be taken seriously on UNIX around 2000. Even James Gosling, one of influencial people in the Emacs history says its time is now passed and he rather use Netbeans, https://www.youtube.com/watch?v=Mv5Q39MuTvk https://www.youtube.com/watch?v=Mv5Q39MuTvk
      - DonHopkins 2y ago
        Speaking of old obsolete versions of Gosling Emacs, Lars Brinkhoff just posted this source code for UniPress Emacs 2.20 he got from from Hans Hübner! That's the version we called NeMACS, with support for NeWS (Gosling's PostScript based window system), tabbed windows and pie menus, etc: https://github.com/larsbrinkhoff/emacs-history/tree/sources/Hans%20H%C3%BCbner https://github.com/larsbrinkhoff/emacs-history/tree/sources/... So the answer to DVRC's ("Adopter of orphaned technologies") question on June 3, 2023, is yes, finally! HCIL Demo - HyperTIES Authoring with UniPress Emacs on NeWS https://www.youtube.com/watch?v=hhmU2B79EDU https://www.youtube.com/watch?v=hhmU2B79EDU https://news.ycombinator.com/item?id=36166642 https://news.ycombinator.com/item?id=36166642 DonHopkins on June 2, 2023 | parent | context | favorite | on: Brave Browser introduces vertical tabs UniPress Emacs for NeWS in 1988: Scriptable GUI, tabbed windows, pie menus, hypermedia authoring tool for HyperTIES browser. Emacs served as an IDE with tabbed window and pie menus, for interactively editing, viewing, and navigating HyperTIES markup language documents, graphics, and interactive PostScript "applets". HyperTIES browser and Gosling Emacs authoring tool with pie menus on the NeWS window system https://en.wikipedia.org/wiki/Tab_(interface)#/media/File:HyperTIESAuthoring.jpg https://en.wikipedia.org/wiki/Tab_(interface)#/media/File:Hy... >HyperTIES is an early hypermedia browser developed under the direction of Dr. Ben Shneiderman at the University of Maryland Human Computer Interaction Lab. This screen snapshot shows the HyperTIES authoring tool (built with UniPress's Gosling Emacs text editor, written in MockLisp) and browser (built with the NeWS window system, written in PostScript, C and Forth). The tabbed windows and pie menu reusable components were developed by Don Hopkins, who also developed the NeWS Emacs (NeMACS) and HyperTIES user interfaces. (Sorry about the quality -- this is a scan of an old screen dump printed by a laser printer.) Emacs provides the pie menus you see popped up in the illustration (Articulate, Edit, New (Storyboard, Link, Picture, Target), Define) that control the HyperTIES browser from the custom text editing mode of HyperTIES storyboards (like web pages), which the HyperTIES browser (in the background, which emacs controls in a sub-process) formats and displays. HyperTIES also uses pie menus for navigation and in interactive "applets" programmed in PostScript. DVRC on June 3, 2023 [–] Do any version of UniPress Emacs (that support the NeWS driver) or NeMacs survive? https://news.ycombinator.com/item?id=31989423 https://news.ycombinator.com/item?id=31989423 I wrote the following description of how NeWS relates to modern web browsers and "AJAX" in the NeWS article on Wikipedia, and I also worked on TNT (The NeWS Toolkit) at Sun: https://en.wikipedia.org/wiki/NeWS https://en.wikipedia.org/wiki/NeWS >NeWS was architecturally similar to what is now called AJAX, except that NeWS coherently: >- used PostScript code instead of JavaScript for programming. >- used PostScript graphics instead of DHTML and CSS for rendering. >- used PostScript data instead of XML and JSON for data representation. [...] HyperTIES Emacs Authoring Tool MockLisp code (Yet Another HyperTIES Implementation, This Time In Emacs): http://donhopkins.com/home/ties/yahtittie.ml http://donhopkins.com/home/ties/yahtittie.ml https://donhopkins.com/home/ties/ https://donhopkins.com/home/ties/ HyperTIES Discussions from Hacker News: https://donhopkins.medium.com/hyperties-discussions-from-hacker-news-937d156f0330 https://donhopkins.medium.com/hyperties-discussions-from-hac...
kstrauser 2y ago
> All I need is a Github Copilot clone I'm using https://github.com/copilot-emacs/copilot.el https://github.com/copilot-emacs/copilot.el > good code search feature. project-find-regexp is a nice start. > Oh and automatic reloads of open but unchanged buffers when switching between git branches. (global-auto-revert-mode t) > Oh and the ssh remote extension. I haven't compared it to Tramp.
bryanlarsen 2y ago
> All I need is a Github Copilot clone or you could just use copilot through copilot.el > and a good code search feature. Like through helm or ivy? > Oh and automatic reloads of open but unchanged buffers when switching between git branches. My emacs does that, and I don't think I did anything special to get it. > Oh and the ssh remote extension. like tramp?
dharmab 2y ago
You're almost describing Zed to a T.
- lysace 2y ago
  Just played with it. You're right. Thanks!
baq 2y ago
vscode find in files is literally ripgrep FYI.
pjmlp 2y ago
Many of us are perfectly fine with commercial software, we have been into the other side and got tired of the religion.
- mschild 2y ago
  I think a lot of people don't have a problem with commercial software, but rather with the disingenuous behavior that some companies display. VSCode was/is often touted as open source and Microsoft are using it to present themselves as community loving until MS sees an opportunity to extract some money/hinder the competition. In comparison, Jetbrains is transparent with their offerings and what you get. There is in my opinion a clear difference in how they operate and how they are perceived.
  - pjmlp 2y ago
    You mean transparent like the way they added AI to their products?
    - mschild 2y ago
      I'm unaware of how they added it. Was there controversy around it?
      - pjmlp 2y ago
        Yes, initially it was a pain to disable, a big no-no for many customers. https://devclass.com/2024/03/11/jetbrains-bows-to-user-pressure-and-unbundles-ai-assistant-in-new-intellij-idea-beta/ https://devclass.com/2024/03/11/jetbrains-bows-to-user-press...
        mschild 2y ago
        Thanks for linking it. Obviously not a great approach. I'd still look at Jetbrains more favorably than most other tech companies. Clearly not perfect by any means. To be fair to them, they seemed to listen to the feedback and provided it as a separate plugin.
globular-toast 2y ago
Warning, though: the older you get, the harder it will be to learn emacs. The best time to learn it is yesterday. The second best is today.

rs186 2y ago

So how do you get intellisense and debug C++ in Zed?

LoganDark 2y ago
Zed uses open-source language servers. It just doesn't rely on proprietary extensions. I actually worked a bunch on the language server logic in Zed trying to get a bunch of it to work on Windows. All I have to say about that is: ugh.
yoyohello13 2y ago
clangd is an LSP. You can use it in any editor with LSP support https://clangd.llvm.org/ https://clangd.llvm.org/
- hu3 2y ago
  Why isn't Cursor using this by default then?
  - dharmab 2y ago
    I don't think MSVC provides an LSP, so the VSC C++ extension uses proprietary Intellisense features instead. LLVM provides their own extension to use the clangd LSP: https://marketplace.visualstudio.com/items?itemName=llvm-vs-code-extensions.vscode-clangd https://marketplace.visualstudio.com/items?itemName=llvm-vs-... In short: Corporate politics and the Cursor team taking the path of least resistance.
dharmab 2y ago
There's a great doc on exactly how Zed handles syntax and intellisense-style completions: https://zed.dev/docs/configuring-languages https://zed.dev/docs/configuring-languages Debugging isn't in yet, but is actively being worked on and planned for public release before 1.0: https://github.com/zed-industries/zed/issues/5065 https://github.com/zed-industries/zed/issues/5065, there's an active channel in their Discord discussing the development of the feature.

hobs 2y ago

Reminds when I excited to see Azure Data Studio adding Postgres support, but it was actually a binary extension with no ability to fix or change anything and no way for other useful databases to extend and use the functionality; they had spent all the time and effort to make sure nobody could do something like it but them. Weird, ADS is dead and nobody spent any time on it, I wonder why.

notnmeyer 2y ago

zed is veerrrry good. i really appreciate the clean ui compared to vscode and its ilk. don’t love the pricing they just announced though. i don’t mind paying for my tools, but it not being unlimited scares me off slightly.

kstrauser 2y ago
Agreed, but at least that's an optional feature you can choose to pay for if you want to. And if that changes, I'll drop it and head back to a Free editor.
dharmab 2y ago
I think it's totally fair for them to charge for an optional feature that requires a cloud service. And if you don't like their pricing you can use a different provider, including self-hosted ones.
- notnmeyer 2y ago
  absolutely agree
3eb7988a1663 2y ago
Just installed it, but it put a terrible taste in my mouth where the IDE has a hamburger menu instead of showing the file menu. This is meant to be a professional, technical application used on a desktop. Glad some designer made 150 pixels look clean instead of busy, but now I am reduced to an extra click any time I need to do something. Minor grievance, sure, but it it not an encouraging sign for their priorities.

eviks 2y ago

Does Zed have a comparable C++ extension?

dharmab 2y ago
Zed uses tree-sitter and LSP; most popular languages do not require extensions, and extensions for niche languages are shockingly easy to write. Literally 100-300 lines of Rust boilerplate and around 300 lines of config boilerplate, with minimal maintenance/upkeep. https://zed.dev/docs/languages/cpp https://zed.dev/docs/languages/cpp
- wolvesechoes 2y ago
  Many words to state that it doesn't.
  - dharmab 2y ago
    Many words to explain that it doesn't need one, as you can see by clicking that link.
  - mort96 2y ago
    No idea why they worded it the way they did. But the answer is: yes, Zed has something comparable, using clangd as a C and C++ LSP server.

hnlmorg 2y ago

I’ve just installed Zed based on your recommendation and I’m already impressed. It’s fast, the interface is distraction free and it already has support for all the languages I use regularly. Even Terraform support, which is notoriously hard to get right, is better than the current “best” in VSCode. Thanks for the recommendation

kstrauser 2y ago
Glad you like it! It’s a proper native app (no Electron) and super responsive. I truly enjoy using it. And yes, the language support (via Treesitter and LSPs) is fantastic.

int_19h 2y ago

I actually worked on VSCode (Python support specifically) at Microsoft in the past, and seeing this kind of thing frustrates me to no end. The worst part is all the VSCode is still promoted to developers as open source, even though official extensions increasingly aren't, with bits and pieces gradually replaced with closed code. It's not that closed source is necessarily bad, but when F/OSS popularity is milked for marketing purposes while stuff like this happens, it just feels very wrong. If you want to be closed source for reasons, fine, but be honest and upfront about it.

VyseofArcadia 2y ago
There's a special place in hell for orgs that do this. Google has been doing the same thing with Android. IIRC Apple at least has always been fairly clear and consistent with what bits of its software are open and what bits aren't. To my knowledge they haven't been breaking off chunks of Darwin and closing them. (Although if I'm wrong do correct me.)

exceptione 2y ago

Even better: Theia. It supports most vscode extensions right out of the box. https://theia-ide.org/ https://theia-ide.org/

deleted 2y ago
[deleted]
0rzech 2y ago
Supports without auto updating them and along with other annoyances: https://news.ycombinator.com/item?id=43793016 https://news.ycombinator.com/item?id=43793016 . VSCodium [1] has much better UX than Theia IDE, IMHO. [1] https://vscodium.com/ https://vscodium.com/
- bobajeff 2y ago
  Yeah I've just tried Theia. Vscodium is still the way to go. I just wish they had answers for issues like running extensions that depend on cpptools. I managed to work around it by installing an old version of cpptools from before the nag prompt that checks you're running it in vscode was added. Zed is almost a good solution but like most they are missing most of vscodes markdown editing features*. Also, right now there's no way to hide the sign in and ai buttons from the UI. * https://code.visualstudio.com/Docs/languages/markdown https://code.visualstudio.com/Docs/languages/markdown

sureglymop 2y ago

Zed is nice but I still prefer vs codes configuration scheme. Was working on a web/frontend project a while ago and had honestly a very hard time to set up Zed to do everything from formatting to linting and syntax highlighting correctly. Meanwhile in vscode I had to install 3 extensions, enable them for the workspace and they were already aware of each other and seamlessly worked together. I also think it's a mixed opportunity not to allow for something like Lua or a Lisp to configure Zed in. It's very promising but I'm not willing to switch just yet.

bitbasher 2y ago

So, you hopped from one walled garden to another? I don't mean that in a mean way, but have you considered another editor that is more open?

sitkack 2y ago

Zed is a for profit company, aren't they just going to go down the same route?