3 ms·
First chip-based 3D printer is smaller than a coin with no moving parts
- smusamashah 2y agoOriginal linked MIT article[1] has a little better explanation of how this light beam is controlled. The researchers use electrical signals to nonmechanically steer the light beam, causing the resin to solidify wherever the beam strikes it. the researchers used liquid crystal to fashion compact modulators they integrate onto the chip. The material’s unique optical properties enable the modulators to be extremely efficient and only about 20 microns in length. A single waveguide on the chip holds the light from the off-chip laser. Running along the waveguide are tiny taps which tap off a little bit of light to each of the antennas. The researchers actively tune the modulators using an electric field, which reorients the liquid crystal molecules in a certain direction. In this way, they can precisely control the amplitude and phase of light being routed to the antennas. [1] https://news.mit.edu/2024/researchers-demonstrate-first-chip-based-3d-printer-0606 https://news.mit.edu/2024/researchers-demonstrate-first-chip...
- kunalgupta 2y agoperfect thank you
- sandworm101 2y agoSo this is more of a 3d printer head rather than a proper 3d printer? It would still need external moving parts to handle the resin and such.
- neltnerb 2y agoCorrect, the resin is not part of the chip. It controls the phase of the light as well as the intensity, which is novel compared to a galvo. The paper suggested holographic curing, which sounds like a joke but it seems is a real thing where they use three photons to cure and controlling phase lets them do that somehow. But it's only kind of mentioned offhand, so I'm not sure how serious they are about it.
- timschmidt 2y agoSounds similar to what these guys are up to: https://xolo3d.com/ https://xolo3d.com/ They have a novel photoinitiator which requires light from two different wavelengths to initiate polymerization. They currently scan a plane of laser light through a static resin vat while projecting a 2D video through the same vat.
- neltnerb 2y agoLooks very cool, thanks! Yeah, that's the kind of thing I mean, it sounds like there are a few ways to do it. The paper cites https://pubs.acs.org/doi/10.1021/acscentsci.3c01263 https://pubs.acs.org/doi/10.1021/acscentsci.3c01263 which is triplet even, though who knows what the research group would do if they actually implemented it...
- xg15 2y agoFrom what I got, it replaces the printer head plus the entire positioning assembly of the head. It's still not the entire printer, but it would massively simplify the mechanical construction.
- phkahler 2y agoSo it's a non-mechanical galvanometer replacement for steering a laser. Very cool, but that's like one small part of a 3D printer. Also wonder if it can steer in 2 dimensions, or if you need 2 of these, or is that not possible? Can it be used for ILDA laser shows?
- kvemkon 2y agoSubmitted here: https://news.ycombinator.com/item?id=40627113 https://news.ycombinator.com/item?id=40627113.
- ItsABytecode 2y agoI think still need some moving parts for the build plate if you want to cure more than 1 layer of resin Edit: from the MIT article, it sounds like the goal is to eventually use a hologram to cure the entire print at once. Related video: https://youtu.be/Ha0QA7iLGy8?si=wWSqex16ybyUDWxE https://youtu.be/Ha0QA7iLGy8?si=wWSqex16ybyUDWxE
- aftbit 2y agoAIUI, resin 3d printers currently either use a UV laser and a set of galvos to steer it across the build plate, or a bright UV LED and an LCD to selectively admit and block light to various parts of the plate. The laser approach is higher performance but more fiddly and expensive, while the LCD approach is simpler to set up but has a shorter service life (due to UV degradation of the LCD) and produces lower light intensities at the build plate. I have often wondered why nobody uses the DMD approach[1] common to digital laser projectors. This sounds something like that, albeit with the mirrors replaced with this LCD magic. 1: https://en.wikipedia.org/wiki/Digital_micromirror_device https://en.wikipedia.org/wiki/Digital_micromirror_device
- 0_____0 2y agoCarbon3D use micromirror arrays IIRC.
- themoonisachees 2y agoPlenty of brands offer DLP-based printers, like the elegoo mars 4 DLP.
- kragen 2y agoa dmd has thousands or millions of moving parts though; i think this is a phased array instead
- etrautmann 2y agoThis is cool but the miniaturization and integration of the optics doesn’t result in a functioning printer. You still need the bath of resin and the printer. The headline is like saying you’d have a coin sized printer if you only focus on an inkjet head.
- lawlessone 2y agoIt's just a laser diode?
- robust-cactus 2y agoThe form factor here is cool, but as someone whose been resin printing a bunch lately, the pitch to carry it around in your pocket sounds questionable. 1. Where are you going to store the resin? It isn't good to touch it. Are they also expecting people to carry around somewhat toxic resin in their other pocket and then make a little puddle on the ground to print? Resin printing is messy and cleaning is hard. Make sure to carry isopropyl alcohol in your other pocket. 2. It produces toxic fumes while printing that you need to exhaust. So you at least need a mask. 3. It takes hours to print on a large machine: you need a model file, to edit the model to print in resin well and then the actual print can be multiple hours long. Not to mention multiple print failures which is often the case. Everything mentioned about the surgical application sounds possible today, but it's still not fast enough or reliable enough in that scenario. Also... Resin isn't that strong, you want to graft it to a bone, what?
- jvanderbot 2y agoRaw materials aside, a tiny printer can go places a large printer cannot. Space? Deep sea? Inside other machines? Or on the tip of a robotic arm to do print little parts right onto their permanent place like a spider placing silk? Who knows!? 99% sure the "in your pocket" statement is more like "smaller than a breadbox", as in, it's plain-as-day comparisons of size, not use.
- robust-cactus 2y agoThe size of the printing mechanism is an innovation for sure, but I think after you add up all the other components to make a functioning printer you end up at nearly the same size: a resin vat, space to print, various leveling mechanisms, filters, UV light shield etc - the form factor doesn't really change all that much.
- jvanderbot 2y agoIf you think 3D printing is always going to be on a flat bed of the same size using the same amounts of material, then yeah, minimizing the printing mechanism sure seems like a non-necessary improvement. But that's not the intended use case anyway. It can only print small things. Maybe it can add tiny details or structures to large prints though
- kunalgupta 2y agocan’t read article without constantly clicking ads, blocked toms hardware
- jjk166 2y agoOptical phased arrays are a really cool emerging technology, and this is one of the silliest possible applications for them.
- iamleppert 2y agoThinking machines, super computers. Your Scientists Were So Preoccupied With Whether Or Not They Could, They Didn’t Stop To Think If They Should !
- barfbagginus 2y agoWhat is neat is that this could potentially project a configurable hologram! You could partially cure the bottom layer, pull that layer up, then finish curing that layer while forming the next layer. This could significantly accelerate the print speed!
- sitkack 2y agoSilicon-photonics-enabled chip-based 3D printer https://www.nature.com/articles/s41377-024-01478-2 https://www.nature.com/articles/s41377-024-01478-2
- cdaringe 2y agoI thought “surely this title is a typo or clickbait.” Nope, it is correct. Pretty wild, albeit still very much a POC.
- asynchronous 2y agoExcept it is pretty much just a laser, and requires a vat of resin to actually produce anything. Still impressive actually, but it’s no tiny FDM.
- jmholla 2y agoYea. This is more of a printer head. It'd be neat to have a bunch of these in one printer and drastically speed up print speeds.
- criddell 2y agoThe missing punctuation in the HN title had me wondering what coins have moving parts?
- mypalmike 2y agoExcept it really is clickbait. It's a really cool development in 3D print technology, but it's not a tiny printer.
- throawayonthe 2y ago[dead]