27 ms·
Roll-to-roll fabricated perovskite solar cells under ambient room conditions
- tgsovlerkhgsel 3y ago70 USD for 100 W seems pretty bad? Especially given the low efficiency.
- f_devd 3y agoI would expect the price to decrease over time given perovskite solar cells are currently not yet mass produced and still actively being researched.
- pfdietz 3y agoOr, the degradation problems keep them from ever taking off. If they do, they may only do so as part of tandem cells with a silicon PV bottom layer.
- aredox 3y agoA quick look around gives me a current figure of ~1 USD/W in Australia (dunno if that evolved a lot in a short time with the current inflation and currency rates). Money quote: "The cost for [production] Seq[ence]. B is likely to be lower than 1 USD W−1, and Seq. C could be lower than 0.5 USD W−1. These represent a significant reduction to the cost estimate from previous works of around 1.5 USD W−147. This results from a similar or lower cost in $ m−2, and a higher recorded efficiency. However, the technology is still not able to compete with mass-produced silicon solar cells, for which module spot prices have been lower than 0.30 USD W−148. Despite this, opportunities may exist in niche markets that value the lightweight and flexible nature of these modules, as discussed in our previous work47. The next step for the technology would be exploring high-value PV markets at the predicted manufacturing costs while addressing the remaining high-cost components to sustainably advance the technology towards commercialisation. Supplementary Fig. 12, with about 5 USD m−2 module cost (excluding encapsulation), shows the potential for the further cost reduction by eliminating the remaining high-cost components."
- deleted 3y ago[deleted]
- hackerlight 3y agoThe cost model is based on high labor cost assumptions of $25-36 USD/hr. See page 14 below. I wonder how much lower China's industrial capacity could reduce the costs. https://static-content.springer.com/esm/art%3A10.1038%2Fs41467-024-46016-1/MediaObjects/41467_2024_46016_MOESM1_ESM.pdf https://static-content.springer.com/esm/art%3A10.1038%2Fs414...
- londons_explore 3y agoThe market need for cheaper solar cells seems to have evaporated, since the vast majority of the cost of solar projects these days is always in labour/land/wiring/inverters/grid connection/maintenance contracts. That means saving a bit of money on the panels in return for lower efficiency is never a good deal.
- hackerlight 3y agoSome are trying to combine perovskite with silicon solar cells because they specialize at capturing different wavelengths. So-called tandem solar cells.
- selimthegrim 3y agoI wonder what happened to singlet fission cells and other things trying to get around the SQ limit
- pfdietz 3y agoStill being worked on. https://interestingengineering.com/energy/paderborns-new-solar-cell-design-with-tetracene-boosts-efficiency https://interestingengineering.com/energy/paderborns-new-sol...
- selimthegrim 3y agoThanks for the link - I used to be peripherally involved in this field and last I heard MIT (Baldo et al.) had resorted to some hafnium oxynitride layer, which is really not gonna drive costs down at all.
- ElevenLathe 3y agoIf the materials are cheap enough, we might be able to build them into other stuff that was going to use labor anyway (shingles, asphalt, siding, etc). No idea what the economics of this look like though, and electricians (a pretty expensive form of labor) will need to be involved no matter what, but at least theoretically cheaper cells can also deal with labor costs.
- yareal 3y agoAs an outsider, what's the appeal of PeSC? The paper says they are less efficient and harder to manufacture, but also that they are the "next generation". I would have thought the next generation would be more efficient or easier to manufacture or both.
- SquareWheel 3y agoAs I understand it, silicon cells have largely been optimized to near their peak potential. There's not much room left for improvements at this point. Organic and perovskite cells have a higher potential efficiency. Just like was the case with silicon, it will take years of development and incremental improvements to see higher efficiencies in these technologies. Silicon cells were also not very good at the start of their development. In that sense perovskite has the potential to be the next generation of solar cell. New developments, such as the one demonstrated in the linked paper, are just a step towards that ultimate goal of more efficient solar. I'm not an expert in this field, so please feel free to correct any mistakes I've made.
- thimkerbell 3y agoWhich ones don't have heavy metals?
- deleted 3y ago[deleted]
- pjc50 3y ago"Harder to manufacture" is relative. The hope is that they would be easier, because they're not monocrystalline and don't require the high energy https://en.wikipedia.org/wiki/Czochralski_method https://en.wikipedia.org/wiki/Czochralski_method to produce a semiconductor substrate. The paper (and the general "pitch" of perovskites) plans to use roll-to-roll printing on flexible substrates.
- mchannon 3y agoa-Si has been at or beyond this level of efficiency since the 90's and also does not require a Cz or FZ process. It's encouraging to see progress but where perovskite thin films show potential is in an integrated mechanical stack application with silicon, where they can supplement each other's barely-double-digit efficiencies focusing on different parts of the spectrum to combine to reach something on par with traditional crystalline silicon, but thinner and with lower production costs. Seeing thin film beat crystalline silicon is like seeing nuclear fusion become cost-effective. It's perpetually 10 years away, and has been since the 70's.
- myself248 3y agoOvonics was doing roll-to-roll solar cells in the 1980s, were they not? This is exciting if the technology scales better or something, but I can't help feeling that we've stagnated a bit.
- durkie 3y agoWhat material though? Nanosolar was also doing CIGS roll-to-roll cells, and that didn't work out too well for them.
- chrisbrandow 3y agocosts of solar panels of all sorts have dropped 100 fold in that time. I'm not sure I'd call that stagnation.
- pfdietz 3y agoPV cells on thin flexible substrates are interesting for space applications, where they could have very high power/mass.
- denton-scratch 3y agoWhat is "roll-to-roll", in this context?
- pjc50 3y agohttps://www.ronaldindia.com/all-you-need-to-know-roll-to-roll-printing/ https://www.ronaldindia.com/all-you-need-to-know-roll-to-rol...
- bionhoward 3y agoIt means, to print long sheets on rollers like a newspaper might.
- dr_dshiv 3y agoHere is the graph of exponential installed solar capacity [1]. Like Moore’s law, continuous technological innovation and investment will be required to keep the pace. We just hit 1 terawatt— and doubling time seems to be about every 3 years. So… 1,2,4,8,16,32,64,128,512,1028, 2056 terawatts in 30 years? With 20% capacity, that’s equivalent to >300,000 Million Tons of Oil (MToE) per year. Current global energy consumption is 14,000 MToE [2]. [1] https://ourworldindata.org/grapher/installed-solar-pv-capacity https://ourworldindata.org/grapher/installed-solar-pv-capaci... [2] https://en.wikipedia.org/wiki/World_energy_supply_and_consumption https://en.wikipedia.org/wiki/World_energy_supply_and_consum...
- sp332 3y agoThat chart ends at 2022, but 2023 was an even bigger year than you would expect from that curve, with over 500GW of new solar installed. https://www.iea.org/reports/renewables-2023/executive-summary https://www.iea.org/reports/renewables-2023/executive-summar...
- dr_dshiv 3y agoAlso: “ In 2023, an estimated 96% of newly installed, utility-scale solar PV and onshore wind capacity had lower generation costs than new coal and natural gas plants. In addition, three-quarters of new wind and solar PV plants offered cheaper power than existing fossil fuel facilities.”
- jandrese 3y agoAhh, the classic case of seeing the bottom half of an S curve and projecting it out to infinite exponential growth. The number of times things have experienced infinite exponential growth in all of history starting from the Big Bang: 0.
- ncr100 3y ago/jk just wait long enough and that zero will go to Infinity
- 3y ago
- beanjuice 3y agoMy two cents having formerly worked in perovskites trying to upscale the process: Perovskites are exciting (or were exciting) because they have a high theoretical efficiency, are relatively simple to prepare, and the "worst" component in them is lead (an incredibly abundant material). The big problem with them is that they are famously horrifically unstable in ambient conditions. Roll-to-roll processing means that you can fabricate them in mass scale. Ambient means that they claim to have solved issues like working in glovebox conditions. Even if the price of solar panels has come down below labor, the fact that they are produced from rare earth minerals goes (in my opinion) underreported. Consider the relationship between perovskites and multi-junction solar cells similar to the comparison between sodium and lithium ion batteries. Lithium will always have a higher capacity, but sodium is so abundant that for many applications it just doesn't matter anymore.
- hinkley 3y agoDo we not have lead free perovskites now?
- philipkglass 3y agoTin based perovskites have been studied for almost as long as the lead based ones but they have been less efficient and much less stable. Work continues to increase their efficiency and stability, e.g.: "Efficient tin-based perovskite solar cells with trans-isomeric fulleropyrrolidine additives" (2024-01-29) https://www.nature.com/articles/s41566-024-01381-7 https://www.nature.com/articles/s41566-024-01381-7
- KennyBlanken 3y agoSolar panels "produced from rare earth minerals" is "under-reported" because they are not made from rare earth minerals, and further: the minor metals they are dependent upon are byproducts of refining base metals, ie there isn't much additional impact from using them; we already make them. I'm not really sure how someone who supposedly worked in solar panel research would think rare earth metals are used in solar panel construction. Solar panels have decades-long lifespans (their rated lifespan is based on when they drop below 80% efficiency, not when they become useless), there's a growing recycling chain to sell complete aged panels to other markets (typically underdeveloped nations where daily equivalent hours of solar are very high and land is plentiful so efficiency doesn't matter), and the panels themselves are highly recyclable for the materials to make new panels. Ever notice how the people 'concerned' about the environmental impact of mining rare earth minerals, which go into durable goods that are highly recyclable/recoverable, don't seem to have a problem with oil drilling, fracking, coal strip mining, etc - for something that is usable once, maybe twice?
- sholladay 3y agoLet’s make sure they use little to no lead first before we deploy them to homes all around the world. https://www.ncbi.nlm.nih.gov/pmc/articles/PMC9860350/ https://www.ncbi.nlm.nih.gov/pmc/articles/PMC9860350/
- fbdab103 3y agoWondering if anyone could help shore up my understanding or point out a resource to get me a better handle on this. Using the solar maps from here[0], you can find the kWh/day/m2 for the US. If I am in a say 5.7 kWh/day/m2 region and I have 1 m2 of a 20% solar efficiency panel, does that mean I would get 1.14 kWh usable out the other end? Or is it 20% * X% horribly lossy conversion factor? If I want to math out 11kWh/day in the 5.7 region, back calculating would put me at requiring 9.6 m2 of panels (11 / (5.7 * 0.2). Again, if there is a horrible lossy conversion factor, that would just go into my denominator, correct? Or am I missing something entirely? I tried to use this calculator[1], but I could not recapitulate the numbers they were generating. [0] https://www.nrel.gov/gis/solar-resource-maps.html https://www.nrel.gov/gis/solar-resource-maps.html [1] https://pvwatts.nrel.gov/ https://pvwatts.nrel.gov/
- flavius29663 3y agoThe map shows solar resource, irrespective of the technology you're using. For example, you could be using heat collectors that would capture closer to 100%. To keep things simple, for back of the envelope calculations, you can imagine 1kW per square meter. Subtract cloud coverage, night hours and then multiply with 0.2 for PV panels efficiency. If you want 11kWh/day, you need: (5.7 * 0.2) * Y = 11, so Y = 10 square meters. You can double check this: 10 sqm should have about 10KW of solar potential energy, but with PV efficiency you're getting about 2KW, so to reach 11kWh, you need 5 good hours of sunshine on average.
- philipkglass 3y agoYou'd be able to generate 1.14 kWh at the panel level if you kept the panel pointed directly at the sun throughout the day [1]. This is called "2 axis tracking" and it was sometimes used for solar farms when solar panels were much more expensive. Now that panels are much cheaper, 2 axis tracking has practically vanished from the market. The added expense and mechanical complexity isn't worth it. Single axis tracking, where the panels just rotate to track the sun from east to west, is still popular in large solar farms. It captures more sun than leaving the panels stationary but has less complexity than 2 axis tracking. For a rooftop solar panel, you're not going to have any sort of sun tracking. The lack of tracking will reduce your output at the panel level. You will also lose more output if dust, debris, and bird droppings don't get cleaned away regularly. You also lose some energy when the direct current electricity from your panels gets converted to alternating current in the inverter. How much loss depends on the inverter and how heavily loaded it is. The NREL tool you linked says it's designed for "homeowners, small building owners, installers and manufacturers", which implies that it's for rooftop systems. It includes estimates for those loss factors I mentioned above, which is why I expect that it falls short of the number you calculated. [1] EDIT: I forgot another significant factor: temperature coefficient of performance. A panel gets its efficiency measured at "standard test conditions" which include a moderate (near room temperature) panel temperature. Panels lose some efficiency as they heat up, which means that they don't perform as well as you might naively expect in the middle of the summer. The loss varies by panel technology. The very best conditions for panel output -- where they actually surpass reported efficiency -- is "bright sun but cold air," like noon on a freezing cold day with clear skies.
- Animats 3y agoRoll to roll amorphous silicon solar panels go back to the mid-2000s.[1] Those were commercial products, and, at the time, not much more expensive than rigid cells. [1] https://en.wikipedia.org/wiki/Energy_Conversion_Devices https://en.wikipedia.org/wiki/Energy_Conversion_Devices