3 ms·
Now that's an interesting idea. Dig a ring of small holes around the perimeter of the tunnel and use them to build the tunnel liner. Then remove the dirt and ro
by Animats 4y ago
Now that's an interesting idea. Dig a ring of small holes around the perimeter of the tunnel and use them to build the tunnel liner. Then remove the dirt and rock in the middle.
Microtunneling has been around for years. It's done with small tunnel boring machines, to install pipes of various sizes.[1] The drives are usually not that long, because these are pushed from the starting point, not self-propelled like the big TBMs.
That's what they seem to be doing here. There's some hand-waving around the "special borepipes". Those are apparently drilled by existing techniques. Only when all those tubes are in place around the perimeter of the tunnel volume do the robots move in and grout.
Trying to do all that pumped concrete grouting work with those small tubular robot vehicles is a neat trick. The animations show them drilling small crosswise holes longer than the tube diameter, which is a bit suspicious.
All this would seem to be limited by how far you can drive the "special borepipes" using standard drilling techniques. That can be quite a distance, though; the current microtunneling record is 2.2 km.[2] That's more than enough for most urban projects. You're going to want stations and access points along the route, so the drive can be done in sections.
(When watching the original post video, start at 3:30 to skip a long ad.)
[1] https://www.youtube.com/watch?v=teVrJs6CSe0 https://www.youtube.com/watch?v=teVrJs6CSe0
[2] https://www.napipelines.com/building-big-microtunneling-terratest-world-record-project/ https://www.napipelines.com/building-big-microtunneling-terr...
- amelius 4y agoWhat is the advantage? You have to remove the dirt in the middle either way. And with a bigger drill you can get through tougher obstacles.
- Animats 4y agoIn soft ground, you have more protection against the roof caving in and water incursion.
- cma 4y agoFor harder ground/solid rock it seems like you could slice off sections of the inner core material and not have to drill as much total material.
- imtringued 4y agoThis could make blasting the core easier because there is now room for the explosion to expand into (assuming portion of the tunnel liner is removable) and the shape of the tunnel can be optimized to be non circular.
- jaclaz 4y agoA somehow similar approach has been done some 30+ years ago for an underground train station in Milan, Italy: https://www.rocksoil.com/index.php/it/ricerca-e-sviluppo/22-ricerca-e-sviluppo/75-arco-cellulare https://www.rocksoil.com/index.php/it/ricerca-e-sviluppo/22-... The bore pipes in that project were much larger though, and became part of the tunnel supporting structure. Besides the small test they showed in this video, the animations look a lot like "pure theory in ideal terrain", very likely this technique, if it will ever be proved actually viable, will be suited to only a few, and very homogenuous, kinds of geology/terrains.
- Animats 4y agoThat was a nice job in Milan. It's a very common case - a shallow tunnel in soft soil. Usually, those are made by cut and cover. This approach has less disruption to surface activities.