8 ms·

A year ago, my titanium fork broke (while driving rather slowly on good tarmac, photo here https://twitter.com/dothebart/status/1486765955254530051 https://twit

by max_k 4y ago

A year ago, my titanium fork broke (while driving rather slowly on good tarmac, photo here https://twitter.com/dothebart/status/1486765955254530051 https://twitter.com/dothebart/status/1486765955254530051), and the titanium frame got a few cracks as well. My motto "the last bike I'll ever buy" collided with reality. Fortunately, I got away with just a few scratches - just a minute later, I would have been at 60+ kph downhill. My new bike has a steel frame. I love it, but titanium was more flexible and more comfortable. And of course titanium is nerdier! :-)

jupp0r 4y ago
Glad you're ok. I wish the anti helmet crowd from the Netherlands from a different thread 2 weeks ago would read this.
- Xylakant 4y ago
  The “anti helmet crowd” wouldn’t have any issue reading be this. Wearing helmets when you’re on a sports bike is very common in the Netherlands. It’s just not common on Dutch commuters cycles, but then again, these do not have this failure mode. Sports bikes in general have much less margin for failure, and thus fail more often and catastrophic than a solid steel bike.
  - jupp0r 4y ago
    Right, all commuter bikes are made of solid steel and steel bikes never break. Got it.
    - Xylakant 4y ago
      Typical Dutch commuter bikes are made of steel. And yes, steel breaks, but the failure mode of a solid steel fork is much much different from a titanium, aluminum or carbon fork. They bend, crack and at some point break, but they’ll typically not snap like this because steel is much less brittle than any of those materials. Also, speed matters. Going 15 or 50 when the thing breaks makes a difference.
      - digitalscribe 4y ago
        > Also, speed matters. Going 15 or 50 when the thing breaks makes a difference. Isnt this an argument that helmets are more important for passenger vehicles? After all, car accidents cause about 10x more head trauma in the usa.
        toast0 4y ago
        Passenger vehicles from this century come with airbags that significantly reduce head trauma. Three point seatbelts have been mandatory in all seating positions for longer, IIRC, and significantly reduce the likelyhood of head vs pavement collisions. But, if absolute safety is paramount, you do want a five point harness, flameresistant coveralls, neck support, and a helmet, sure.
    - prmoustache 4y ago
      You are very unlikely to crash at 15-20kph and even less likely to hit your head at such speed in a very upright position. In fact the odds aren't bigger than when running. Do you think runners should wear helmets? I chose to wear or not my helmet depending on the conditions. Running errands nearby on my girlfriend's lady bike? I don't use it. Riding on mostly separated bicycle paths at my girlfriend's slow pace, same. Riding 3h on the roads or trails on my road and mountain bikes, I wear it.
    - ajuc 4y ago
      When you're driving 15 km/h on a flat road accelerating and decelerating at 0.1 g (and almost always only in the horizontal direction) - you don't have the structural requirements for the bike that sport cycling has, yes.
- kqr 4y ago
  I don't think any "anti helmet crowd" would claim that helmets never ever help. Just that it's rare enough that it may not be worth the inconvenience. After all, are you strapping on a helmet while you're out walking, or driving a car? Sometimes, very rarely, that could be what saves your life.
  - midoridensha 4y ago
    I don't know about you, but I can't walk at 15kph+, so the amount of crash energy my head would experience while walking is quite low.
    - SECProto 4y ago
      15-20 km/h is a fairly common pace in running races (2:05 to 2:50 marathon pace), no helmets are worn there.
      - midoridensha 4y ago
        When you fall while running, you don't have a mechanical contraption limiting your movement. The nature of riding a bicycle (or motorcycle) makes it much more likely you'll hit your head. People also don't fall as much while running as they do when riding: it's easy to hit a crack in the pavement and lose control on a bike.
        haspok 4y ago
        > People also don't fall as much while running as they do when riding Says who? Just a couple of days ago I had a runner get past me while I was walking on the street, 2 seconds later she hit a bump on the pavement with her foot and fell down hard (she even made a loud splash sound as she hit the ground). No, she didn't have a helmet. Should she have? At the end of the day, people should be walking around in full steel plate armour, for protection and safety. Or even better, not walking around at all. Bicycles should be banned! > it's easy to hit a crack in the pavement and lose control on a bike. No, its not. The person who says this probably hadn't ridden a bicycle in their life, or if they have, not often and not recently. Bicycle wheels are EXCELLENT at getting over cracks, bumps, ditches, holes, whatever - as long as the attack angle is as close to 90 degrees as possible. It is the riders responsibility to make sure that is the case. Wider tires also help, lower pressures too... and high speeds, counterintuitively. Of course, if you are afraid of falling or uncertain of your skills on the bike, wear a helmet by all means. Just don't think that it is "normal" and all riders are like that.
- max_k 4y ago
  Oh, bike helmets. I missed that thread, and I don't want to start yet another endless internet discussion about helmets, but let me point out one thing: the helmet I did wear likely wouldn't have saved my life, had the fork breakage happened one minute later.
- edejong 4y ago
  I’m 100% Dutch. I ride road bikes and commuter bikes. I’ve never in my life seen a steel commuter bike break like that. They rust, they bent and they scratch, but they won’t break. Or maybe if you buy a very iffy brand? As a road cyclist I go 30-50 km/h with a helmet. And as a commuter I’ll keep a moderate 20 km/h without a helmet. Big difference in terms of kinetic energy.
  - fsckboy 4y ago
    I'm pretty sure the primary kinetic energy you need to worry about in a fall is the vertical drop.
    - discreteevent 4y ago
      In the worst case the speed your head would hit the ground at would be about 15 km/h.
      - fsckboy 4y ago
        it's not really a theoretical problem, people actually die or experience brain damage from falling over while standing still; we know a fall of that distance is dangerous. Helmets reduce the impact and save lives and brains. The only real question is the frequency of the falls taking place from bicycles.
    - newaccount74 4y ago
      You are much more likely to catch your fall with your hands when you have an accident with your city bike vs a road bike. Biking at less than 25km/h just isn't that dangerous (unless a car hits you)
      - fsckboy 4y ago
        being more likely to catch your fall needs to be computed against how likely the falling is, and how likely injury is. This just confuses things, much easier to look at how many injuries occur.
ralfd 4y ago
I thought titan would keep good for a life time?
- max_k 4y ago
  ... yes, that's what they say about titanium, why I decided to pay the price, but turns out it's not true.
- speed_spread 4y ago
  The metal, yes. What's at stake here seems to be the welding, which is the tricky part with titanium.
kasey_junk 4y ago
Did the manufacturer provide an explanation? A sheer (which that looks like) should be near impossible on any properly manufactured bicycle under normal usage.
- max_k 4y ago
  No. I got a full refund, though. Most importantly, I'm so extremely happy I'm still alive, I don't care about anything else.
  - kasey_junk 4y ago
    I wouldn’t view that as an indictment of a particular material. That’s like first generation carbon failure and those went away 20 years ago. I’d blame the manufacturer specifically in that case because it’s both catastrophic & unexpected.
    - robin_reala 4y ago
      Sudden memories of early http://www.bustedcarbon.com/ http://www.bustedcarbon.com/
giuliomagnifico 4y ago
Woaa horror story, what a luck that you didn’t get hurt! Anyway it’s weird because it doesn’t look broken on a weld, very rare situation, titanium should last forever.
- 70rd 4y ago
  Yeah, I'm kind of flabbergasted to be honest, total failures like that are rare for metal tubing.
steelframe 4y ago
> my titanium fork broke Yikes! Fork failure is the stuff of nightmares. I'm glad you're okay. Among the participants of a local riding club in my area, I've met two people with custom titanium frame builds who told me that their frames cracked within a few years of use.
- liotier 4y ago
  > Yikes! Fork failure is the stuff of nightmares Still have nightmares about a fork that, during a mountain bike descent 30 years ago, started oscillating increasingly until it bent and locked the wheel perpendicular to my vector - and my buddy still has dreams of me acting Superman along his ride, for a few short instants...
- galangalalgol 4y ago
  Titanium can have problems with oils I've been told. Seeping into crystal defects and propagating. Typically I've been told they use polymer coatings to prevent the ingress. But with scratches and lubricants I think this would be much more common if it was a real thing. I've always thought a spring bronze/brass frame would be fun. Even better modulus of elasticity, but the strength to weight is much worse. Also keep waiting to see flash bainite frames.
xcskier56 4y ago
One of my coaches in college raced for a pro/semi-pro team. Their first race of the season was on new/pre-production bikes straight from one of the major manufacturers. 3, I repeat, 3 steer tubes broke in that 1 race. It was a really rugged race, but needless to say the manufacturer had to scramble to fix the forks before going to production. One guy was going over railroad tracks and his handlebars just came off. Not what you want in the middle of a cat-1/pro peloton.
- WalterBright 4y ago
  That's what happens when one tries to shave grams off of the weight.
analog31 4y ago
I had one of the fork ends break off a steel fork. Fortunately I was going at less than a walking pace, navigating out of a store parking lot. I was 2 miles from home, and just walked the bike while planning its replacement. It was a break that I would have noticed much sooner, had I regularly inspected it, because the other side was half broken off. The funny thing is, I play in a band, and when I told my story that night, 3 guys in the band offered to weld it.
- kazinator 4y ago
  I'd get the drummer to put together the rig which holds the parts in place, bass player to make the crucial spot welds and then the lead guitarist to go ape shit with the rest, while the singer goes whoo yeah!
deleted 4y ago
[deleted]
bambax 4y ago
OMG the image is terrifying! Glad you were ok...

by max_k 4y ago

jupp0r 4y ago

Glad you're ok. I wish the anti helmet crowd from the Netherlands from a different thread 2 weeks ago would read this.

Xylakant 4y ago
The “anti helmet crowd” wouldn’t have any issue reading be this. Wearing helmets when you’re on a sports bike is very common in the Netherlands. It’s just not common on Dutch commuters cycles, but then again, these do not have this failure mode. Sports bikes in general have much less margin for failure, and thus fail more often and catastrophic than a solid steel bike.
- jupp0r 4y ago
  Right, all commuter bikes are made of solid steel and steel bikes never break. Got it.
  - Xylakant 4y ago
    Typical Dutch commuter bikes are made of steel. And yes, steel breaks, but the failure mode of a solid steel fork is much much different from a titanium, aluminum or carbon fork. They bend, crack and at some point break, but they’ll typically not snap like this because steel is much less brittle than any of those materials. Also, speed matters. Going 15 or 50 when the thing breaks makes a difference.
    - digitalscribe 4y ago
      > Also, speed matters. Going 15 or 50 when the thing breaks makes a difference. Isnt this an argument that helmets are more important for passenger vehicles? After all, car accidents cause about 10x more head trauma in the usa.
      - toast0 4y ago
        Passenger vehicles from this century come with airbags that significantly reduce head trauma. Three point seatbelts have been mandatory in all seating positions for longer, IIRC, and significantly reduce the likelyhood of head vs pavement collisions. But, if absolute safety is paramount, you do want a five point harness, flameresistant coveralls, neck support, and a helmet, sure.
  - prmoustache 4y ago
    You are very unlikely to crash at 15-20kph and even less likely to hit your head at such speed in a very upright position. In fact the odds aren't bigger than when running. Do you think runners should wear helmets? I chose to wear or not my helmet depending on the conditions. Running errands nearby on my girlfriend's lady bike? I don't use it. Riding on mostly separated bicycle paths at my girlfriend's slow pace, same. Riding 3h on the roads or trails on my road and mountain bikes, I wear it.
  - ajuc 4y ago
    When you're driving 15 km/h on a flat road accelerating and decelerating at 0.1 g (and almost always only in the horizontal direction) - you don't have the structural requirements for the bike that sport cycling has, yes.
kqr 4y ago
I don't think any "anti helmet crowd" would claim that helmets never ever help. Just that it's rare enough that it may not be worth the inconvenience. After all, are you strapping on a helmet while you're out walking, or driving a car? Sometimes, very rarely, that could be what saves your life.
- midoridensha 4y ago
  I don't know about you, but I can't walk at 15kph+, so the amount of crash energy my head would experience while walking is quite low.
  - SECProto 4y ago
    15-20 km/h is a fairly common pace in running races (2:05 to 2:50 marathon pace), no helmets are worn there.
    - midoridensha 4y ago
      When you fall while running, you don't have a mechanical contraption limiting your movement. The nature of riding a bicycle (or motorcycle) makes it much more likely you'll hit your head. People also don't fall as much while running as they do when riding: it's easy to hit a crack in the pavement and lose control on a bike.
      - haspok 4y ago
        > People also don't fall as much while running as they do when riding Says who? Just a couple of days ago I had a runner get past me while I was walking on the street, 2 seconds later she hit a bump on the pavement with her foot and fell down hard (she even made a loud splash sound as she hit the ground). No, she didn't have a helmet. Should she have? At the end of the day, people should be walking around in full steel plate armour, for protection and safety. Or even better, not walking around at all. Bicycles should be banned! > it's easy to hit a crack in the pavement and lose control on a bike. No, its not. The person who says this probably hadn't ridden a bicycle in their life, or if they have, not often and not recently. Bicycle wheels are EXCELLENT at getting over cracks, bumps, ditches, holes, whatever - as long as the attack angle is as close to 90 degrees as possible. It is the riders responsibility to make sure that is the case. Wider tires also help, lower pressures too... and high speeds, counterintuitively. Of course, if you are afraid of falling or uncertain of your skills on the bike, wear a helmet by all means. Just don't think that it is "normal" and all riders are like that.
max_k 4y ago
Oh, bike helmets. I missed that thread, and I don't want to start yet another endless internet discussion about helmets, but let me point out one thing: the helmet I did wear likely wouldn't have saved my life, had the fork breakage happened one minute later.
edejong 4y ago
I’m 100% Dutch. I ride road bikes and commuter bikes. I’ve never in my life seen a steel commuter bike break like that. They rust, they bent and they scratch, but they won’t break. Or maybe if you buy a very iffy brand? As a road cyclist I go 30-50 km/h with a helmet. And as a commuter I’ll keep a moderate 20 km/h without a helmet. Big difference in terms of kinetic energy.
- fsckboy 4y ago
  I'm pretty sure the primary kinetic energy you need to worry about in a fall is the vertical drop.
  - discreteevent 4y ago
    In the worst case the speed your head would hit the ground at would be about 15 km/h.
    - fsckboy 4y ago
      it's not really a theoretical problem, people actually die or experience brain damage from falling over while standing still; we know a fall of that distance is dangerous. Helmets reduce the impact and save lives and brains. The only real question is the frequency of the falls taking place from bicycles.
  - newaccount74 4y ago
    You are much more likely to catch your fall with your hands when you have an accident with your city bike vs a road bike. Biking at less than 25km/h just isn't that dangerous (unless a car hits you)
    - fsckboy 4y ago
      being more likely to catch your fall needs to be computed against how likely the falling is, and how likely injury is. This just confuses things, much easier to look at how many injuries occur.

ralfd 4y ago

I thought titan would keep good for a life time?

max_k 4y ago
... yes, that's what they say about titanium, why I decided to pay the price, but turns out it's not true.
speed_spread 4y ago
The metal, yes. What's at stake here seems to be the welding, which is the tricky part with titanium.

kasey_junk 4y ago

Did the manufacturer provide an explanation? A sheer (which that looks like) should be near impossible on any properly manufactured bicycle under normal usage.

max_k 4y ago
No. I got a full refund, though. Most importantly, I'm so extremely happy I'm still alive, I don't care about anything else.
- kasey_junk 4y ago
  I wouldn’t view that as an indictment of a particular material. That’s like first generation carbon failure and those went away 20 years ago. I’d blame the manufacturer specifically in that case because it’s both catastrophic & unexpected.
  - robin_reala 4y ago
    Sudden memories of early http://www.bustedcarbon.com/ http://www.bustedcarbon.com/

giuliomagnifico 4y ago

Woaa horror story, what a luck that you didn’t get hurt! Anyway it’s weird because it doesn’t look broken on a weld, very rare situation, titanium should last forever.

70rd 4y ago
Yeah, I'm kind of flabbergasted to be honest, total failures like that are rare for metal tubing.

steelframe 4y ago

> my titanium fork broke Yikes! Fork failure is the stuff of nightmares. I'm glad you're okay. Among the participants of a local riding club in my area, I've met two people with custom titanium frame builds who told me that their frames cracked within a few years of use.

liotier 4y ago
> Yikes! Fork failure is the stuff of nightmares Still have nightmares about a fork that, during a mountain bike descent 30 years ago, started oscillating increasingly until it bent and locked the wheel perpendicular to my vector - and my buddy still has dreams of me acting Superman along his ride, for a few short instants...
galangalalgol 4y ago
Titanium can have problems with oils I've been told. Seeping into crystal defects and propagating. Typically I've been told they use polymer coatings to prevent the ingress. But with scratches and lubricants I think this would be much more common if it was a real thing. I've always thought a spring bronze/brass frame would be fun. Even better modulus of elasticity, but the strength to weight is much worse. Also keep waiting to see flash bainite frames.

xcskier56 4y ago

One of my coaches in college raced for a pro/semi-pro team. Their first race of the season was on new/pre-production bikes straight from one of the major manufacturers. 3, I repeat, 3 steer tubes broke in that 1 race. It was a really rugged race, but needless to say the manufacturer had to scramble to fix the forks before going to production. One guy was going over railroad tracks and his handlebars just came off. Not what you want in the middle of a cat-1/pro peloton.

WalterBright 4y ago
That's what happens when one tries to shave grams off of the weight.

analog31 4y ago

I had one of the fork ends break off a steel fork. Fortunately I was going at less than a walking pace, navigating out of a store parking lot. I was 2 miles from home, and just walked the bike while planning its replacement. It was a break that I would have noticed much sooner, had I regularly inspected it, because the other side was half broken off. The funny thing is, I play in a band, and when I told my story that night, 3 guys in the band offered to weld it.

kazinator 4y ago
I'd get the drummer to put together the rig which holds the parts in place, bass player to make the crucial spot welds and then the lead guitarist to go ape shit with the rest, while the singer goes whoo yeah!

deleted 4y ago

[deleted]

bambax 4y ago

OMG the image is terrifying! Glad you were ok...