7 ms·
I'm currently in the process of literally tearing down walls in my old house (built in the 40's). I used to fear smashing into walls. Once you do a bit of drywa
by latchkey 4y ago
I'm currently in the process of literally tearing down walls in my old house (built in the 40's). I used to fear smashing into walls. Once you do a bit of drywall and mud yourself, you realize it isn't that big of a deal. Everything I've learned has been off YT videos and there are some excellent channels with all of the professional tips and tricks. It isn't rocket science by a long shot.
- RHSeeger 4y agoWhile it's not rocket science, I always find it to be super annoying to do. Getting things smooth/flat when you're done (generally, I think I wind up doing 4-5 layers of mud) takes a fair amount of time. Plus sanding it down without getting the powder everywhere is difficult; I use a wet sander / sand "sponge", but even then I wind up with some of it spreading around.
- bombcar 4y agoDrywall is one of those things I've found it is highly worth hiring out. Even if you hang the drywall, hiring someone to tape and mud and sand can be entirely worth it - they do it day in, day out, can use five minute mud, and can get done in a few hours what would take you days or even a week. Doing small repairs is easy enough that everyone should at least know the concepts involved.
- lazide 4y agoConcrete finishing is another, IMO. It takes a lot of practice to be smooth enough at doing it to have a nice result over any large area before the concrete sets. It’s not the type of thing that benefits from going ‘hmm, maybe I should do it this way’ after you’ve started. Also, it’s much, much easier to do as a small crew - easily 3-5x more productivity per person. Same as drywall. It’s not easy to do as a solo worker, even if you know the tricks.
- latchkey 4y agoMy house already has the "Santa Fe" texture on the walls... it is supposed to be not perfect. Going with smooth, seems like a mistake to me.
- robocat 4y agoI’m guessing what people are saying is that they have seen plenty of home jobs where the surface is left with an obvious bulge, hollow, or an hideous line. Some people are very sensitive to surface unevenness, and really notice slight surface imperfections, and some people don’t notice gross errors. In my very limited experience, many textures are often harder to make look right than flat surfaces. I think I am sensitive to texture variation, because with textures I notice mistakes and I often notice where alterations have been made. Either way, your Santa Fe look is irrelevant to the topic of fixing problems in walls when they are not textured like yours.
- dekhn 4y agoYep, this was one of my great enlightenments: no matter how good or professional a wall looks, it's really just drywall mounted on wood, some cracks sealed, and then painted over. When the walls are off in the house is the best time to get anything done. Sometimes I don't even want to put the walls back on- for example, an unfinished garage with exposed studs is very convenient.
- bombcar 4y agoI may someday use shiplap instead of drywall in specific rooms, simply because you can make it so you can take it off and put it back on relatively easily.
- NegativeLatency 4y agoI have a couple of large plywood sheets in closets for this purpose. Paint it the same color and nobody knows
- briHass 4y agoOne of the big benefits to drywall, that often gets missed in the typical libel it gets, is its fire resistance. It's basically a water-containing gypsum powder. Some areas where plywood would be preferrable for durability, like a garage, are often prohibited from using something other than sheetrock due to the fire risk. Probably not a big deal unless you have entire walls of it.
- midoridensha 4y agoThey should make some kind of drywall panels with easily-removed fasteners at the corners.
- NegativeLatency 4y agoOh yeah that's a good point. Mine is limited to a couple of areas where there are or will be plumbing and network cables.
- PragmaticPulp 4y agoI’ve done a lot of drywall work and I still avoid it whenever possible. Doing basic drywall and paint isn’t rocket science, but getting a professional level fit and finish actually takes a lot of practice and experience. It’s also a completely different experience when you’re trying to match old specialty paints from a previous homeowner, blending repairs to match the wall texture, and other complexities that don’t show up in those basic YT videos. If you’re in a situation with untextured walls, known paint colors, simple repairs, and a forgiving eye, then it’s really not bad, but the complexities can add up quickly. Even in the best cases, cutting into drywall all across the house to pull wire would be a project I’d try to avoid at all costs in an occupied home. The fast path still requires multiple days to go through all of the drying and re-application cycles to build up all the right layers, not to mention dust control to keep that fine dust out of everything you own.
- latchkey 4y agoI just redid my whole kitchen to the studs. You're making it out to be a bigger deal than it is. Now I'm onto a bedroom where I removed two whole walls that had been weirdly built to cut the room into a smaller room. This is going to require a bunch of repair work, all the way to the ceilings. Certainly, if you're looking for perfectly smooth walls, then you're never going to be happy regardless. My place is Santa Fe, which is perfect... it is supposed to be messy. But this is a place built in the 40's... nothing is perfect. Doing something perfectly would stand out even more. If you want old paints to match, then just paint the whole wall. That's easier and probably the right solution anyway.
- jdgoesmarching 4y agoSure, it’s easy when you have the wall texture that is designed to look like a bad drywall job. If you’re trying to match the wall type found in 90% of American homes, there’s a huge difference in efficiency and quality between a DIYer and a professional mudder. A good feathering job saves a ton of wasted sanding effort and drywall dust. When I ask GCs and tradespeople which job they would would never do themselves, drywall is far and away the most common answer. It’s the only job I regret doing myself.
- akvadrako 4y agoI agree it isn't rocket science, but plastering if one of those things best left to professionals, much more so than plumbing or electrical for instance. They usually make near minimum wage, are just so much faster and produce a better result. I've started plastering a few of my walls and after wasting a couple days doing a few square meters ended up hiring a couple guys to do the rest of the house. There is just no comparison in value.
- latchkey 4y agoI'm sorry, but it isn't that hard, really. Also, awkward to talk about how you pay someone a barely living wage as an excuse to not do it yourself.
- lazide 4y agoIf your time is billed out at a large multiple of x, it’s pretty relevant.
- kortilla 4y ago> Also, awkward to talk about how you pay someone a barely living wage as an excuse to not do it yourself. Guess how much they make if you don’t pay them? It’s better for everyone if someone who can make more money per hour uses that higher earning power to offload lower income tasks to people in those jobs.
- midoridensha 4y agoExactly. This is why it's immoral to cook your own food for dinner, for instance, instead of going to a restaurant or hiring a personal chef.
- latchkey 4y agoNice sarcasm. My thought as well. Where do you draw the line?
- thatfrenchguy 4y agoDrywall, sure, it’s easy enough (although hard to make look perfect) Plaster walls on wood studs is a lot harder, and plaster over brick or concrete is impossible.
- whiddershins 4y agoUnless your walls are plaster on lathe. Hah we took 150 large bags of rubble out of the apartment last week. No, it wasn’t a gut reno, just 2 walls and 2 closets.
- mr_sturd 4y agoWe had our loft converted last year, and after watching the builders construct the partitioning walls, I think I would probably manage that. We also had to have some walls removed and re-built and made the house too dusty for the kids to be around. This house is an old English terraced house, and lots of the non-retaining walls are wooden lath and plaster, with horse hair mixed in for good measure!
- pacaro 4y agoI had a (small) fire in the wall of a house in about 2000. Turned out the rubber insulation had fallen off the wiring, in various places there were just pairs of bare copper wires. An electrician friend helped me rewire, and we layed in cat5 and conduit (between storeys) at the same time. Rewiring a house from the 1840s required pulling up floorboards, but no significant work in the walls. I'm not sure whether older houses are more maintainable by default, or just once you have rocked over some threshold of continuous occupancy, there there are sufficient layers of repair and rework that you just stop worrying about (for example) sawing through a floorboard. While I didn't have to mess with the walls, if I had, I'd just have torn down the existing plaster and redone it, like you say it's not that big of a deal