8 ms·
3M Glass Cloth Tape 361
- DemeterFarm 4y agoAnyone have any examples of what they use this for? I don't have much that needs to be taped AND fireproof.
- jcims 4y agoHad the same question. I always have a roll of that aluminum tape around and find uses for it in hot spots. This seems like it could be better in cases where there’s some flex. It’s probably got a lot higher tensile strength than most tapes, too.
- CamperBob2 4y agoIf, say, you had a crystal oscillator or voltage reference that is temperature-compensated or oven-stabilized, but also vulnerable to short-term instability due to convection currents or other airflow-related issues, you might wrap it in this type of tape, or use the tape to secure an aluminized heat wrap material that doesn't adhere well enough on its own. Or if you're out of https://www.grainger.com/product/3M-Duct-Tape-Nuclear-Grade-52ND50 https://www.grainger.com/product/3M-Duct-Tape-Nuclear-Grade-...? and need something in a pinch. Obscure thing to see here, for sure.
- waiwai933 4y agoThe recommended applications seem like they make sense? > * Permanent sealing of high temperature ducts or chambers > * Applications requiring heat treatment followed by clean removal of the tape with little or no stain > * Protect surfaces against abrasion > * High temperature masking > * Bundling, holding and wire harnessing
- deleted 4y ago[deleted]
- exmadscientist 4y agoIt is expensive enough that you only want to use it when necessary, but they [1] built this place [0] with it. The hot water drill they used to bore into the Antarctic ice cycled between +100 degrees C and -40 degrees C daily, which caused it to develop leaks. This tape is one of the few materials that can survive in those conditions and hold the thing together. Nothing else they tried could do it. [0]: https://icecube.wisc.edu/ https://icecube.wisc.edu/ [1]: http://www.psl.wisc.edu/projects/large/icecube http://www.psl.wisc.edu/projects/large/icecube
- twawaaay 4y agoThese specialty tapes seem expensive but when you need them you need them and nothing else will help. And then the price does not matter that much.
- joshvm 4y agoWinterover '20-21 here (there are other WOs on HN). We call it "driller tape" because it's was used all the time when the strings were installed (i.e. during drilling). Generally useful stuff for sticking things outdoors, though you do need to be quick with it. We also have a lot of teflon coated cable on station because everything else goes rock solid within a few minutes in winter. I rewired a bunch of people's heated goggles with that stuff (with an adapter for an off-head battery) because the factory cabling would break. However it's not made by 3M, the stuff we have at Pole now is Nitto P-212 [0][1]. It's possible we or other experiments used 3M in the past - given it's been a decade since we broke the ice - but the stuff on station definitely has that blue/white branding on the inside of the roll. Just to give an idea of how oddly stringent we are down there, and how experimental a lot of this is - regular things break all the time even in relatively controlled environments. Simple solutions like that tape are preferred where possible. The year before I wintered, the IceCube summer crew had to replace over 100 PSU fans in the cluster with equivalent Noctuas because the OEM ones would fail weekly. We did the same with DOM power supplies - I think we use exclusively Meanwell now. Never had any issues with those in my deployment, so it made quite a big difference. It's a harsh continent :) [0]: https://www.nitto.com/eu/en/products/e_parts/heat_resistant020/ https://www.nitto.com/eu/en/products/e_parts/heat_resistant0... [1]: https://www.cambridge.org/core/journals/annals-of-glaciology/article/icecube-enhanced-hot-water-drill-functional-description/F2A93B250A9FDB4E8A94101787BA3A68 https://www.cambridge.org/core/journals/annals-of-glaciology...
- dtgriscom 4y agoMyself, I often use it as a back-up strip for submerged arc welding. (Well, I would if I did any submerged arc welding...)
- code_duck 4y agoI recall running into glass cloth tape, and it having some savvy use in glassblowing… but I can’t remember what.
- sc970 4y agocivil aircraft engineers will carry this and 3M 425 aluminium ‘speed tape’ with them which covers most jobs. This is for sealing the cargo hold wall panels to ensure they are completely covered in flam proof materials. Normally a visual inspection is carried out each week to look for any damage in the holds.
- sc970 4y agoFor reference. MEA A320 weekly check https://masco.com.lb/wp-content/plugins/documents/A320%20WEEKLY%20NEW.pdf https://masco.com.lb/wp-content/plugins/documents/A320%20WEE...
- bragr 4y agoTangent but this caught my eye: >Cleaning of vacuum waste lines with chemical cleaning agent and crushed ice Is there like a special ice cleaning slurry they use? Or do they just dump a bucket of ice and some chemicals in the lavatory and flush?
- sc970 4y agoJust some ice and chemical then flush. Skychem or Honeybee 76 is the chemical
- galangalalgol 4y agoSome people use ice to clean RV tanks too. Flush a bunch of it then drive a while and let it bang around as it melts then drain it. Probably would work on a boat too.
- hellotomyrars 4y agoYeah. Used to do this in my years of traveling in a fifth-wheel. Works great.
- js2 4y agoWorks well for garbage disposals. Also a good way to get rid of freezer ice that's bern through too many defrost cycles.
- woah 4y agoHow much does this stuff cost?
- mrb 4y ago4 USD per yard: https://www.amazon.com/dp/B00LN84Q2G https://www.amazon.com/dp/B00LN84Q2G
- norvvryo 4y agoOr $105 for 60yd https://www.digikey.com/en/products/detail/3m/361-3-4-X60YD-BOX/1818758 https://www.digikey.com/en/products/detail/3m/361-3-4-X60YD-...
- chrisseaton 4y agoAre aerospace engineers really working in 'yards'?
- mike_d 4y agoThere is no metric on the moon.
- walrus01 4y agoFlight itself is certainly done in feet and knots and such. But I would hope that fasteners on aircraft are all metric these days.
- serf 4y agoabsolutely. if you need a single simple example nearly any cloth-composite is commonly sold in yard lengths.
- swayvil 4y agoI need this tape. For my collection. Here it is at Amazon https://a.co/d/g6NchR8 https://a.co/d/g6NchR8
- genericone 4y agoDefinitely one more tape to add to my bin of tapes: various widths of kapton, various vhb mounting tapes, anisotropic electrically conductive 9703, and ultra-slippery rulon tape... all of which I never use of course.
- capnahab 4y agoand the helicopter leading edge tape, I have a 50m roll I have used 3 iches of.
- loxias 4y agoBi-directional filament tape (aka "hexayurt tape") is a good one. Bonds quickly to most things, has absurdly great tensile strength as well. I also have an "exotic tapes" bin. :)
- amelius 4y agoHere's a list of other types of adhesive tape: https://en.wikipedia.org/wiki/List_of_adhesive_tapes https://en.wikipedia.org/wiki/List_of_adhesive_tapes For example, do you already have a toupee tape in your collection? :)
- doctorhandshake 4y agoVHB has gotten me out of mounting jail free many many times.
- FPGAhacker 4y agoThis the kind of thing I wouldn't buy at amazon. It's small, expensive and mechanically simple. A good recipe for counterfeiting.
- rowanG077 4y agoFor all the grief 3M has put on humanity they still make some pretty neat stuff.
- bragr 4y agoSometimes I just bump around their site looking at all the neat stuff they offer and especially the oddball niche application stuff. They really have a glue or tape for just about any scenario!
- jasonhansel 4y agoThe best places for that are websites like Grainger and Fastenal. They sell all the things you see all the time in commercial businesses, but never realized you could actually buy. (Of course, they tend to be surprisingly expensive.)
- hedora 4y agoAlso, check out U Line. They are more packaging / facilities focused.
- xeromal 4y agoI remember 3d printing a pokeball that I wanted to swing open automatically when a latch was opened. Struggled finding anything useful until I hopped on Grainger where, lo and behold, they had a little spring that was perfect for it. The guy on the phone was really helpful too and held it for pickup.
- anoother 4y agoGenuinely serious and ignorant question: What grief?
- bragr 4y agoAs a huge chemical conglomerate with a long history, they've been involved in their fair share of pollution incidents and other controversies. https://www.bloomberg.com/graphics/2022-3m-pfas-toxic-forever-chemicals-europe/ https://www.bloomberg.com/graphics/2022-3m-pfas-toxic-foreve... https://www.reuters.com/business/3m-agrees-pay-98-mln-resolve-suits-over-forever-chemicals-2021-10-19/ https://www.reuters.com/business/3m-agrees-pay-98-mln-resolv...
- wackget 4y agoI've got a propane pizza oven which has some hot spots on the base. Could I use this tape to cover up some of the holes in the bottom gas pipe to reduce the amount of heat which hits the base?
- userbinator 4y agoAre you referring to the burner? That's far hotter than this tape can withstand: Withstands temperatures from -65°F/-54°C to 450°F/232°C and intermittent temperatures up to 550°F/288°C or higher, depending on the type and duration of the heat source
- amelius 4y agoAny tape that can do it?
- murderfs 4y agoBasalt tape might be an option: it's commonly used for car exhaust insulation.
- userbinator 4y agoAs hot as exhaust pipes get, I doubt it would compare to being directly next to an open flame.
- londons_explore 4y agoA gas flame (ie. The blue ones when air is premixed) don't give off a lot of radiant heat, so anything below them ought to be okay.
- dreamcompiler 4y agoSounds like a job for kaowool.
- elil17 4y ago
- duxup 4y ago>Silicone adhesive provides good holding power and clean removal across a wide range of temperatures Adhesives are amazing... I wish I understood them better.
- busyant 4y agoagree. materials science in general is far more interesting than i would have guessed when i was a student.
- marmetio 4y agoThis resource covers every level from pop sci to pro https://www.stevenabbott.co.uk/practical-adhesion/ https://www.stevenabbott.co.uk/practical-adhesion/
- lotsofpulp 4y agoWhat a great link, thanks!
- adolph 4y agoThis video about the Lotus Elise was pretty interesting in its description of how Lotus used adhesives to save weight. https://youtu.be/h0jXhOmL7Xg?t=334 https://youtu.be/h0jXhOmL7Xg?t=334
- SV_BubbleTime 4y ago
- tromp 4y agoGlass cloth 361 sounds like a good name for a cloth to wipe Go (the game) stones.
- benj111 4y agoSounds like a prog rock band to me.
- deleted 4y ago[deleted]
- stevespang 4y ago
- rektide 4y agoYowza. 2.25" roll, 60 yards long is $280 on $bigsite. 33.75 sq ft. I guess $1.55/linear-foot of pretty wide (2.25") very awesome tape aint that bad but this is definitely a bit more than I was expecting. Sounds rad though, keeps planes flying, so I get it. Comments also mention 425 aluminum "speed tape", which seems to be between half to third the price.
- matgessel 4y agoMy favorite tape for attenuating bright or annoying LEDs is ruby litho tape (3M Lithographers Tape 616). It passes deep red light and dims bright green and blue LEDs to a faint red. It's perfect for green/amber status lights; the green "OK" is mostly blocked and the amber "Problem" shines through. Removes easily without leaving a mark. https://www.3m.com/3M/en_US/p/d/b40068069/ https://www.3m.com/3M/en_US/p/d/b40068069/ https://www.amazon.com/3M-Lithographers-0-375-width-length/dp/B007Y7GL8W/ https://www.amazon.com/3M-Lithographers-0-375-width-length/d...
- tartoran 4y agoGood to know. I wasn’t even aware such a tape existed when I covered some powerful blue leds that were interfering with my sleep. Sometimes I wonder if the correct leds are used for status leds. The blue LEDs Im talking about were lighting up a whole wall at night and from somewhat useful they turned to a nuisance of sorts.
- Sharlin 4y agoBlue leds are an obviously incorrect choice; they are only used because are novel and trendy (well, I guess they used to be novel and trendy, anyway). Human color vision is the least sensitive to blue light – but human low-light vision is the most sensitive to it!
- exhuma 4y agoAs someone who is red/green colour blind, I disagree that they are an incorrect choice. Annoying at night yes. But wherever they are used I can finally make out the difference between an ok/nok status.
- Sharlin 4y agoAh, I’m red/green blind too but most blue leds in electronics don’t seem to have a status function beyond "on/off", they’re there just to look futuristic.
- andirk 4y agoMy grow room needs absolute darkness for 12 hours to be optimal. Even 1 tiny LED light on a device eventually illuminates the entire room to my eye after some minutes. So I put a super thin bit on my drill and break the light.
- superdug 4y agoWhy don't you just illuminate the room 24x7 with green overhead lights? And by green, I mean the color itself. I've found that you can operate in the room and with the complete absence of both red and blue all photosynthesis should be halted.