16 ms·
Lead time for new Intel NIC orders is quoted around 52 weeks
- formerly_proven 5y agoCurrently working on a new design for a client, it's quite a pain. Lots of things, even mundane things like connectors and such are out of stock / low stock and usually quite a bit more expensive.
- lbriner 5y agoHow are non-ICs in short-supply? Did I miss a whole story about supply chain problems or is it literally that overall demand has maxed out overall supply and most people don't have the means to increase production?
- rasz 5y agoWe had parts shortages for a couple years now. https://www.arrow.com/en/research-and-events/articles/capacitor-shortage-going-into-2019 https://www.arrow.com/en/research-and-events/articles/capaci... covid exacerbated the problem
- X-Istence 5y agoIf you look at the various ports, the ships are waiting to enter so that they can offload. There's a lack of shipping options available to get items to the US in the first place, that means that various bits and bobs necessary to manufacture a widget aren't available because they are stuck in a shipping container somewhere around the world and there is no available space to put it on a ship.
- cactus2093 5y agoYep outside of a few industries that have specific supply constraints (like semiconductors) the broad shortages are mostly due to the ports. They have zero room to absorb the additional demand thanks to the longshoreman unions having blocked all opportunities for automation and efficiency improvements over the past couple decades, so a record number of ships are waiting at anchor for many days if not weeks outside of major US ports.
- unglaublich 5y agoBlaming failures on unions and employees' rights is a traditional excuse for US companies it seems.
- qiqitori 5y agoI was looking to buy parallel EEPROMs (DIP) a couple days ago and found they were pretty expensive and mostly unavailable. I was wondering if that's because this type of IC is rather niche these days, or whether it's due to what's called the "chip shortage". If anyone knows or has an educated opinion, please let me know...
- mschuster91 5y agoProbably because such ICs are rather niche indeed. Any way of re-architecting your system to use an SPI flash chip? If anything else fails, you could go the extreme route and get a microcontroller to "translate"...
- AdrianB1 5y agoPrice gouging in most cases, supported by difficulties in transportation and customs. I work in manufacturing (not IT products) and this is what we see. Chip shortage is real, but not every single type of chip.
- joezydeco 5y agoIt's a niche part and you shouldn't be surprised if it's discontinued soon. Think about migrating your design. I'm starting to see end-of-life notices for a lot of parts that I wouldn't normally see at their age, but if they're low runners that would totally make sense. If you see lead times longer than a year, that's your early warning.
- Qub3d 5y agoI imagine one end result of this supply squeeze is that a lot of bespoke or legacy parts will be finally removed from designs that have up until now been "good enough". To cite the most common example, vehicle manufacturers' most common supply pain-point is ICs built on a ~200nm process, which was state of the art between 1996-2000. I understand it makes sense to move slower for chips embedded in long-life devices, and they need additional validation; however, at some point if lead times are long enough and prices stay high it becomes reasonable to start that extended validation process on newer chips. This would hopefully mean consumers start seeing infotainment with much better performance in the second half of 2022, and this lines up with industry expectations of when the squeeze will lift.
- baybal2 5y agoHad few surplus STM32 reels. Ebayed them for a few thousand bucks. I can only imagined how much money did the people who envisaged the shortage early enough got from hoarding chips.
- Aissen 5y agoYes, you design for what you can order instead of ordering what's in your design.
- camtarn 5y agoYep, similarly. We work with PLCs where the manufacturer normally has fairly deep stocks of all the PLC CPUs, expansion cards, etc - guaranteed part availability is one of the big selling points of using PLCs. Some things are still available but others are completely out, to the point where we're considering completely redesigning some of our smaller experimental projects around e.g. Raspberry Pis. What we do when RPis stop being available is yet to be seen...
- chakspak 5y agoI think that's already started to happen. I had to buy the Essentials kit this week because a standalone Pi was not available from any distributor, with lead times of up to a year.
- vanattab 5y agohttps://www.theregister.com/2021/08/20/raspberry_pi_supply_eben_upton_interview/ https://www.theregister.com/2021/08/20/raspberry_pi_supply_e... rpi4 are already getting hard to find.
- stragies 5y agoRepurposeable QuadCore ARM SOCs are fairly easy to find in the form of previous-gen Android TV Boxes, for fractions of the price of the RPI4. Some are weaker, some are slightly stronger, but in many embedded situation these do well enough.
- scardycat 5y agoJust in time manufacturing contributes a lot to this shortage. We rely so much on integrated supply chain logistics, the pandemic clearly brought in to focus the "optimizations" of JIT manufacturing. The lack of local supply pools as buffer is so short sighted.
- mrtksn 5y agoI keep seeing that argument every single time and keep wondering, isn’t there reason to implement JIT? Something like cost benefits outweigh the resilience risks? It’s not like people start dying on the streets, simply things are getting expensive and hard to get during disturbances. Are there calculations demonstrating that JIT the risks of optimization are more harmful than helpful in the long run?
- lisper 5y agoIt's a value judgement. You can optimize for the normal case at the cost of disruptions when the unusual happens, or you can optimize for the unusual case at the cost of inefficiency when things are normal. But you can't do both.
- unilynx 5y agoWell only a decade ago Moore's law ensured that keeping any amount of stock on CPUs/GPU/memory would cost you a lot of money, as that would depreciate fast. JIT was a good idea until it wasn't
- whatshisface 5y agoThe Moore's law argument does not apply to low performance embedded chips which are whatever the engineers want them to be, but must be exactly what the engineers wanted them to be. The chips themselves were often the same between different models of the product, but even though demand for them was a very predictable function of the number of products made, and stable over time (pursuant to the stability of demand for the product), everyone's inventory consisted of whatever was in the box that was being carried from the loading dock to the pick and place machine.
- rwmj 5y agoWork laptop was quoted today as delivery in "up to" 24 weeks (with well-informed people saying it might well take that long). And I cannot find anyone with Raspberry Pi CM3+ compute modules with delivery before April 2022.
- lbriner 5y agoHonest question: How can everyone be short of chips? I understand that e.g. car makers reduced their orders and their capacity was given to other manufacturers so they are kind of screwed but surely since the overall capacity got increased (albeit by a relatively small amount) then some manufacturers should have stuff. As far as I can see, pretty much everyone who uses electronics seems to be not just "a bit short" but royally screwed at the moment.
- aseipp 5y agoIn the abstract, it's sort of like asking "How can there still be traffic jams on road XYZ, when there's an open lane that was added recently?" The problem isn't the number of lanes, it's that fundamentally that mode of traffic (mass individiual transit) has capacity limitations, which when exceeded cause it to go into a "bad" state, after which recovery is difficult and arduous. Furthermore, just because you stop letting cars on the specific road doesn't mean the jam resolves instantly; you actually have to significantly reduce pressure over time before that can happen. And that jam causes cars to overflow into other roads, causing other problems. Just removing the "trigger" (too many oncoming cars) that caused the problem is not enough to recover from either the initial problems, or the side effects. People here are using all kinds of networking/hardware analogies and while generally I'm loathe to use those (they often reek of "All I have is a hammer"-syndrome), you do see these problems a lot in such designs. A good example is when something like a database goes down due to having too much load. Recovering from this failure often isn't just a matter of going from "too much load" to "enough load to handle", you actually have to shed significantly more load than that to recover the system, because that initial failure might cause a cascade of failures that prevents that. This often manifests as a kind of ritual where a system admin pulls a big number of levers in the engine room all labeled "Do Not Touch" in just the right order to shed load and reboot things correctly. Real world supply chains are doing the same thing, but their actions are priced in and done months in advance. Logistics is a hell of a thing. I realize this is not a concrete answer about electronic supply chains (someone else can handle that) but rather a more abstract classification, but I think the general idea applies here.
- brink 5y agoWhatever your opinion is about the lockdowns, there is one thing everyone should be able to agree on; they destabilize just about everything. I'm worried about people going hungry or not being able to heat their home this winter from the ripple effects.
- barney54 5y agoThe energy situation in Europe and Asia is already ugly. The Indians only have about 4 days of coal at their powerplants, China has already had blackouts, and in Europe the price of natural gas is the equivalent of oil at $200 a barrel.
- lettergram 5y agoFrom the beginning it was known this would push 130 million people nearly to starvation https://edition.cnn.com/2020/04/22/africa/coronavirus-famine-un-warning-intl/index.html https://edition.cnn.com/2020/04/22/africa/coronavirus-famine...
- the-dude 5y agoManufacturers were anticipating lower demand due to COVID effects, not lockdowns per se. It is not like life would have continued uninterrupted without lockdowns.
- goalieca 5y agoEvery economic forecast I read in April 2020 assumed things would be open by q3/q4 last year.
- nicoburns 5y agoWhich was pretty stupid given that public health professionals (and indeed people here on HN) were forecasting the pandemic lasting a minimum of 18 months from around that time when it became clear that it wasn't going to be contained to China.
- 5y ago
- jeffbee 5y agoWhat was the old lead time? I guess it was less than a year but the article doesn’t mention it.
- deleted 5y ago[deleted]
- stagger87 5y agoParts have been going from no lead time to simply not available. The large lead times are probably a guess, as many parts are going on hard allocation and you have no idea who is going to squeeze in before you. Some IC manufacturers are saying things like "consider other parts for your design" due to these circumstances.
- jacob019 5y agoI bought one last year. They had hundreds in stock of several models. It shipped in a day or two.
- swader999 5y agoAny truth to the rumour that semi truck drive train linkages are unavailable North America wide right now? That could exasperate things quickly.
- MisterTea 5y agoDo you mean U-joints? Or the major components themselves such as transmission, driveshaft, axle, differential, brake chambers, etc?
- brk 5y agoI think he means general availability of trucks and drivers. Not drivetrain components specifically.
- X-Istence 5y agoNo drivetrain components are becoming unavailable. https://www.jittruckparts.com/blog/post/3-takeaways-from-the-current-parts-shortage https://www.jittruckparts.com/blog/post/3-takeaways-from-the... https://www.ccjdigital.com/maintenance/article/15066337/truck-parts-among-supply-chain-casualties https://www.ccjdigital.com/maintenance/article/15066337/truc...
- swader999 5y agoYeah u joints
- deleted 5y ago[deleted]
- newbamboo 5y agoNo.
- jhickok 5y agoFor what it's worth, my brother in law who drives semis had not heard of that. I think it might be a tall-tale.
- 5y ago
- whatshisface 5y agoSmart business people will take this as a lesson about the dangers of zero-inventory manufacturing. Unscrupulous business people will continue running the business at high risk, knowing that they will probably be gone by the time a problem arises. Very smart leaders will use this as an opportunity to think about how to stop their companies from forgetting someone's involvement with a project or process during internal transfers or promotions; the leading route through which unscrupulous business people escape responsibility from secret risk.
- unixhero 5y agoThis is also driven by investor expectations. Not "business people".
- whatshisface 5y agoA lot of this goes on inside departments where investors don't have any substantial insight.
- unixhero 5y agoThey do once a company gets additional funding and or when a company is bought. Investors tend to sit on the boards and yield significant power. You're not wrong, but I don't agree :)
- whatshisface 5y agoI could be wrong but I don't imagine most of the manufacturing economy as being operated by companies that have due diligence done on them very often. Acquisitions happen but once a decade would be considered very often. Depending on the size of the company boards are often completely clueless about ground level details; I can hardly imagine someone on the board of P&G knowing a single thing about the supply chain risk of an individual SKU.
- tablespoon 5y ago> Unscrupulous business people will continue running the business at high risk, knowing that they will probably be gone by the time a problem arises. Or they can just price gouge. Heads I win, tails you lose.
- stragies 5y agoSome people I talk to have started repurposing cheap previous-gen Android TV QuadCore ARM SBCs for the embedded (mostly headless) projects they previously used NUCs and PIs in. They are available at moderate quantity with short delay at under 25€ a pop.
- silksowed 5y agohow much of this is due to the monopolization of manufacturing to a the few most efficient players? concentrated efficiency and concentrated risk?
- nimbius 5y agosomewhat related, but can anyone tell me why PCEngines specifically use Intel nics in their ALIX systems? surely realtek and other players have caught up to them by now for the performance envelope of the board.
- detaro 5y agoDriver support and stability.
- dannyw 5y agoTry using a realtek NIC on a BSD system and see how many days before your networking softlocks. Also some distros just don't include the drivers. I had to build the realtek 2.5gbe drivers from source, on an unnetworked system, last month! Latest ubuntu distro.
- stragies 5y agoAfaik, the Intel Network cards are more like dedicated CPUs, that can run various "programs", one of which is "standard, fully-transparent network card". If signed with the right key, some can run entire stacks, such as iSCSI, FCoE and others. The Multiport ones can do switching, filtering, and some basic routing in hardware. The "other" operating system is totally unencumbered by this. This is routinely used by e.g. Intel AMT/ME, which programs the network card to reroute some destination ports to (in this case internal) recipients (the ME-processor). That feature is what makes out-of-band management possible for people having added the right keys to ME, or knowing one of the preinstalled ones. And as a HW-Vendor you never know; maybe your client might one day want to use these "offloading" features. Maybe he just doesn't know it yet... So when the good offer from Intel comes in, you go for it.