14 ms·
286 vs. 386SX
- h2odragon 5y ago> Cynically, I think there was one more reason. Intel had to license the 286 to other companies. They didn’t license the 386. I think they produced the 386SX to displace those second-source 286s. The Harris 286 chips overclocked handily. The difference between 25Mhz and 40Mhz on a 286 was noticeable, too; except when anything hit the ISA bus which din't push much at all. There were a few systems in that era with SRAM instead of DRAM; I always regretted not catching one. Helped someone track one down for their week long spreadsheet runs.
- xanathar 5y agoI had a 286 12MHz and then upgraded to a 386sx 40Mhz (both manufactured by AMD, btw). It was a HUGE upgrade. First, 12Mhz to 40Mhz was an amazing upgrade, but that was definitely not the reason why I upgraded. The real reason was *compatibilityé. The 286 was compatible with close to nothing by the early 90's. Doom? Sure, runs slow on the 386sx, but on the 286? Does not run at all. And the same goes for all games and programs using one of: 1) 32 bit DOS extenders 2) EMS 3) any amount of XMS more than my 286 could handle 4) >600KB conventional memory, because there's only that much HIMEM.SYS can do 5) Windows 3.0 in 386-enhanced mode
- nsxwolf 5y agoI had the exact upgrade path as you, except that my 286 12mhz was on an accelerator board inside my 4.77 MHz 8088 equipped IBM XT. So I got to be wowed by huge upgrades twice! The 386 40 was my first "homebuilt" before I had ever heard the term.
- fullstop 5y agoMy NEC 286 had a Turbo button to slow things down. I only remember having to use it for a few games which ran too quickly.
- bluedino 5y ago>> The 286 was compatible with close to nothing by the early 90's. Wolf3D came out in 1992, it was the perfect companion for a 286. Same goes for Duke Nukem II in 1993.
- Narishma 5y agoDoom came out much later in 1994. Wolfenstein 3d and a ton of other games worked fine on a high speed 286. EMS also works fine, heck it even works fine on an 8088. What doesn't work are things like EMM386 that emulate EMS using extended memory. The 286 supported up to 16MB of XMS and if you could afford that much RAM, you probably could afford a 386 or 486 CPU..
- patchtopic 5y agoas an unemployed computer science graduate when this came out this CPU was a big deal to me. I had just finished a subject on MINIX and had read Linus original Linux post,and getting a cheap 386sx mobo allowed me to get into Linux for relatively low cost at the time by upgrading my 286.
- pinko 5y agoSame. I ran Linux 0.12 on my 386sx 16mhz in my dorm and it changed my life (literally).
- Turing_Machine 5y agoSame here. The 386SX meant that I could afford to buy one just for screwing around with Linux (which at the time was very much a bare-bones ubergeek thing...).
- hvs 5y agoI (or more accurately, my parents) were one of those that happened to buy a computer in that brief 286 window (specifically an IBM PS/1 Model 2011). My friend bought a 386 shortly after that and I had severe buyer's remorse on behalf of my parents. Still had a lot of fun (and learned to program in Turbo Pascal) on that old 286. https://en.wikipedia.org/wiki/IBM_PS/1 https://en.wikipedia.org/wiki/IBM_PS/1
- luismedel 5y agoI had a model 2121. I still love the design.
- jefflinwood 5y agoThe first computer I built myself was a 386 SX/33 with 4 megs of RAM and VGA (I think). I couldn't afford a hard drive at first because I was a kid, so all i had was a 3.5 inch floppy drive. Had to buy a hard drive later, and if I had to guess, it was an 80 megabyte one. In the mean time, I could use a RAM drive. Computer Shopper was such an amazing magazine to go through, and I would always try and find the best deal from the systems advertised, not that I had any real money. Usually it was from the ads in the back, not the big pretty Gateway ads in the front.
- Scoundreller 5y agoI miss how much money you could save by building yourself.
- ansible 5y agoIn general, you can still save a lot of money, and have a higher quality end result by building your own desktop system, unless you want a really low-end machine. Well, this is not quite true these days, but if the blockchain madness abates, then GPU prices will fall back into reasonable levels.
- aidenn0 5y agoI have not found that to be true at all. It's true if you go with a high-end custom pc builder, but you can often get a very respectable desktop prebuilt for less than the cost of equivalent components.
- ansible 5y agoI guess it also matters what we define as a prebuilt. Some prebuilts are just standard components assembled (hopefully competently). Some prebuilts, especially from Dell, HP, Acer and Lenovo will have custom motherboards, custom power supplies and custom cases that can't be re-used later on. Those usually have the very crappiest cooling solutions too. So they will end up costing you more money down the road, because you can't incrementally upgrade the pieces as much as you could with a self-built PC.
- dghughes 5y ago>Windows ran better on a 386DX or a 486 system, but those were expensive in the very early 1990s I paid $3,500 for a 486DX2 66MHz around 1992/93 I can't imagine what a 486 would have cost in 1991.
- walrus01 5y agoIf I remember the Dell and competitor ads in PC Magazine from 1991 correctly, a decently specced 486 25 MHz was selling for around $4500-5000. With 14" SVGA monitor.
- secabeen 5y agoMy memory is that the computer you wanted always cost 4-5k, but you could get a machine at 2-3k that was okay, but with lower performance.
- walrus01 5y agoDefinitely, at that point in time there was no such thing as a 486SX, and the 486 was very new. The typical economically pried home desktop PC would be something more like a 386SX/20.
- InTheArena 5y agoMy first computer/parents was a 386SX and a 20mb hard disk (almost all of my peers started w/ the Apple IIs, so I was late to this game). I begged by dad over and over to buy a 386DX, not a SX, but no luck on that. There was something weird where windows wouldn't run in 386 protected mode. I was sure it was DX and SX, but this article has the assertion that protected mode worked with SX. I know my dad replaced the system, I assumed he updated the CPU, but maybe it was a bad mobo or something. DIY computing to me will always be RLL/MFM hard disks with insane ribbon cables and IRQ toggles on ISA slots. God, I am old.
- ansible 5y agoOld enough to remember Plug-N-Play ISA cards? More like Plug-N-Pray... har har. It was also a bit of an art back then to stuff as much of the needed TSRs and device drivers into the memory above 640K, to leave as much room as possible for applications.
- gadders 5y agoTweaking EMM386.exe and your config.sys and autoexec.bat..
- ansible 5y agoYes. I remember being confused more than once about extended memory vs. expanded memory. These days I'm dealing with an SoC company that has a dozen variants of the same processor, which have different combinations of four letters in the suffix in various combinations.
- Neil44 5y agoI am strainig my memory but I also think that the 386SX having the narrower memory bus meant less or no changes required from 286 motherboard designs, again making the overall system much cheaper.
- javier10e6 5y agoI worked in the DELL Manufacturing plant in north Austin (Metric Blvd) on the 386->486 heydays. The DELL Optiplex 386SX will run around 800 to 1200 DLLS and came pre-installed with MD DOS 6.1 and Windows 3.1. When the 486 machines started churning out of the factory Windows 95 came to be and the PCs came pre loaded preloaded with a short action snippet of TOP-GUN and MS Encarta Encyclopedia so you could test your optional and expensive Sound Blaster 16 card. Our competition were Compaq and Packard Bell.
- JadeNB 5y ago> When the 486 machines started churning out of the factory Windows 95 came to be and the PCs came pre loaded preloaded with a short action snippet of TOP-GUN and MS Encarta Encyclopedia so you could test your optional and expensive Sound Blaster 16 card. I remember the excitement when the SB meant my computer could play, e.g., human speech in my games—I forget what the games of that day were; one of the early Ultimas?—rather than just the beeps and boops of the PC speaker (although some people could do amazing things with that speaker!).
- guessbest 5y agoIt was Doom. The era of the 386/486 still had a large component of "could it run doom"? And Doom on even an 8bit adlib/sound blaster clone on the ISA bus sounded amazing at the time.
- herodoturtle 5y ago"YOUR SOUND CARD WORKS PERFECTLY" Good memories :-)
- AlisdairO 5y agoThere was a nice easter egg in the installer there that i discovered. Much like how if you repeatedly click on one of your characters in the game they start to get annoyed, the sound card test did the same thing. "IT DOESN'T GET ANY BETTER THAN THIS"
- bityard 5y agoThe 1990 through 2000 stand out to me as the biggest period of innovation and technical acceleration where it comes to PC. While the 80's certainly witnessed the birth and growth of the "personal computer", most of the computers in that decade were still 8086- and 8088-class machines, along with the barely-more-capable 80286 that didn't get popular until the late 80's. But in the 90's we went from 286 and 386 class machines to the scorching-fast 750MHz AMD Athlon. It was very depressing to sink a few thousand dollars into a new mid-range system, only to see it worth about half that a year later. And a doorstop 3 years later. Now we're back to the point where almost any computer you buy will do a good job for common tasks (i.e. not gaming and crypto mining) for at least 5 years or more. My current machine is a 7-year-old laptop and runs all modern software just fine. Unthinkable just a couple decades ago!
- bluedino 5y agoSome people don't realize the 286 came out in 1982, 386 in 1985, and 486 in 1989. The 386 was still being used up until Window 95 came out. It could run on a 4MB 386 but anyone who did probably quickly upgraded to at the very least a 486/66, which still struggled even with 8MB. You really needed a Pentium, or a 100MHz 486 clone.
- midasuni 5y agoWindows 95 really struggled on my 486sx/25 with 4mb. Upgraded to a p100 shortly after and that was fine.
- aksss 5y agoYour 7 year old laptop does not run all modern software just fine. c'mon. It runs the software you feel comfortable asking it to run, but this whole comment board is suffused with people mistaking their stagnant demands for stagnant computing performance/software requirements. A 7-year old processor is somewhere around a haswell or broadwell, right? An i7 of that gen had a passmark score of like 950, whereas an i7 of current gen is about 1700. Even ignoring improvements in mobile graphics, power consumption, displays, and memory capacity, a modern laptop provides a completely different experience and level of capability than a 7-year old laptop. As I said in another comment that got voted down to hell and even flagged (for goodness sake) these comments about the adequacy of very old hardware probably tell us more about the owners' unchanging software tooling and work habits more than they convince us that technical advancement has come to a near standstill. WFH in 2020 required many people to add frequent VC on top of their normal workload. A 7 year old laptop would fully show its age if that normal workload was already pressing the laptop's boundaries. God help you if you wanted to add OBS into the mix. I can play an acceptable form of Assassin's Creed on my Tiger Lake laptop. I couldn't comfortably do that with my Skylake laptop. Examples and scenarios are legion. I'll use any resources I can get in a 13-14" mobile platform and then some.
- 60654 5y ago> That’s why the 386SX had a pretty short shelf life. Once AMD had 386 chips to sell, Intel cut prices on 486s. But for a couple of years it served a purpose. And the chip lived on as a budget option for a couple of more years. TBH that kind of a short shelf life wasn't just a 386 thing. Clocks speeds and architectures were advancing quickly, and all chips had a really short shelf life. For example, in the span of 5 years (say '91-96) you could upgrade from a 386SX 16MHz to a 486DX 50MHz to a Pentium 90MHz, each time paying about the same amount of money but getting a 3x speed-up. And other components like video cards were improving just as quickly. People were upgrading every couple of years because the difference between older and newer models was night and day. Imagine if in 2015 you bought an Intel i3 3GHz and this year you could buy an i7 15GHz with 8x the RAM for the same price.
- brk 5y agoAround that time I was building "high end" PCs for friends and friends-of-friends. I remember the average price stayed around $2500, but the component availability iterated pretty quickly in terms of processor, HDD size/interface, graphics, standard RAM, etc. A 2 year old PC felt woefully underpowered in that era, and a 4 year old PC was almost useless if you wanted to use any "current" software. You'd be out of drive space, unable to run a lot of programs/games, and limping along. Now, my 8 year old Macbook Air is still more or less as functional and useful as it was when I got it.
- farmerstan 5y agoI've been using my 2012 desktop without any discenible issues. The only thing I can't do is edit 4K video and for that I use my 2019 Macbook. I've been toying with the idea of upgrading my desktop but I have no compelling reason, and the idea of reinstalling all my applications (I'm still on Windows 7) makes it really unlikely. To be fair though, I don't play games on it.
- aksss 5y agoTo some degree I imagine there’s also a question of how much demand we put on these modern old computers that reflects changing/diminishing interests as we age. There are certainly workloads available today that would cripple an 8 yo computer (Mac or PC), workloads that a younger version of you may have been more interested in (multiple VMs, gaming, real-time video processing at same time). You probably stressed your 386 to the breaking point within three years of buying it, and you could easily load up an 8yo computer today to its breaking point. My 2016-era laptop is no longer useful to me as, well, anything except an emergency backup. If one can’t discern issues with a four-five yo computer, I would very humbly suggest it also says something about the demands of the owner stultifying to a degree.
- ezconnect 5y agoI remember having this CPU and playing Mortal Kombat and envy my neighbor who had 486DX. If you are a programmer during the transition to 386 it got more interesting because of a lot of new CPU features.
- gtirloni 5y agoThere were also 486SX's. I had a Compaq Presario 433 with a 483SX 33MHz CPU.
- jabl 5y agoIn the 486, the SX was also the low end version, but instead of having a narrower bus interface it lacked a FPU.
- Lio 5y agoAs I remember it, it was the same die for all 486s but the SX had the FPU disabled. I'm sure this was done for marketing in some cases but I think Intel also worked out how to reclaim chips were the FPU was damaged as well. https://en.wikipedia.org/wiki/Intel_80486SX https://en.wikipedia.org/wiki/Intel_80486SX
- whoopdedo 5y agoExcept in the case of the Cyrix 486s which had 80486-like instructions but in a 386 package. (Cyrix's business up until then was selling 387-compatible coprocessors, so perhaps there was some motivation to keep the demand for 386 motherboards up.)
- LargoLasskhyfv 5y agoIntel gave away keychains with that die embedded in clear plastics at a german computer exhibition :-)
- monocasa 5y agoAnd the 487 FPU chip for them was actually a 486DX that just disabled the 486SX.
- pjmlp 5y agoThe first PC that I actually owned was a 386SX running at 20 MHz, 2 MB and a 20 MB hard disk that I would later use DR-DOS and MS-DOS disk compression drivers so that I could fit Windows 3.1 and Borland compilers for MS-DOS and Windows, ARJ/ZIP and Office. Not much was left for documents, so I would "garbage collect" old stuff into floppies. Still was quite useful for about 5 years, however being an SX meant that eventually I could not keep up with my favourite flight sims as they started asking for 386DX as minimum.
- 0x0 5y agoYour hard disk was probably 20 MB, not 20 GB :)
- pjmlp 5y agoFully correct, stupid me, thanks! Was still on time to edit it.
- achairapart 5y agoAround that time my father generously dedicated to me a 7MB partition out of one of those 20MB hard disks. As a kid, I spent days and nights wondering and figuring out what to do or even how to fill that vast amount of disk space.
- fullstop 5y agoWe had STACKER, but not the hardware compression module. There were some legal actions between Stac and Microsoft, which eventually led Microsoft to "upgrade" DOS, but it just removed DoubleSpace. It eventually returned after MS paid out.
- aidenn0 5y agoMy dad had a Toshiba laptop with a tiny ram drive. He ran pklite on all of the dos executables to clear up more space.
- gscott 5y agoIf it was MFM you could get a RLL hard drive controller card and it would format to 40MB then add compression to that!
- klodolph 5y agoArchitecturally the 386 was a massive improvement over the 286. It had an MMU. You could run it in protected mode, run an operating system that would continue running after a program crashed. The 286 technically also protected mode but it really sucked.
- matja 5y agoThe MMU was a sanity-saver even in DOS development using a DOS-extender like DOS4GW or CWSDPMI, where a crash could actually be debugged/output a stacktrace rather than instantly reboot the machine. A fair-few DOS applications (via DPMI) also implemented virtual memory schemes like a "real OS" - I remember POVRay 2.0 officially requiring 2 MB of RAM, but was able to start on my 1MB 386SX machine (albeit with 1-2 mins of HDD-thrashing...).
- 300bps 5y agoI think of my first computer (Commodore 64) very fondly. The Commodore 128 less so and my first 8088 and 286 I mostly think of IRQ and config.sys hell. I worked at a computer consulting company 1990-1991 and started my own company after that. Got very good at puzzling out how to jam as many ISA cards as my customers thought they needed into their computers. But I really think of that as the bad old days. I remember getting computers on a network running SHGEN-1 and SHGEN-1 with Novell Netware 2.15 on 360k floppies on a 286. It took an hour for a single computer! I wouldn’t want to go back to that for anything.
- scns 5y agoUsed our C128 only for its Word equivalent, the rest of the time it ran "downgraded" in C64 mode.
- guerby 5y agoThe first PC I had access to was a "French SMT-Goupil G4" with a 80186 inside: https://en.wikipedia.org/wiki/Intel_80186 https://en.wikipedia.org/wiki/Intel_80186
- 0x0 5y ago286 was limited to 16bit registers, the 386 had 32bit registers and could also enable a 4GB flat memory model. It enabled a completely different architecture and programming model, just like how the first amd64 with new 64bit registers enabled a whole different architecture.
- colejohnson66 5y agoWhat’s interesting about the 286/386 transition is: “Protected Mode” came about with the 286, but was still a 16 bit mode. (Random fact: the only way to return to “Real Mode” on a 286 was through a processor reset). The 386 changed Protected Mode into the 32 bit mode we know today. (And added the “Virtual 8086 Mode” for Real Mode programs) https://en.wikipedia.org/wiki/Protected_mode https://en.wikipedia.org/wiki/Protected_mode
- vlowther 5y ago... and the fastest way to reset the processor was via a triple fault -- arrange for the general protection fault and the double fault handlers to both fail.
- Sharlin 5y agoYeah, from a programmer's perspective the difference is vast. From a regular user's perspective, not so much.
- shortformblog 5y agoI just got a hold of my childhood 386SX (not the exact machine, the same model) and I’m working on slowly, but surely, getting it set up. So it’s fascinating to learn new things about it like this. Great piece.
- _joel 5y agoFond memories of my Dad's Compaq Presario 386sx (25 irrc) big hulking laptop with a top loading 1x CD-ROM. Those were the days!
- scns 5y agoGot an 486 laptop from my grandpa when he didn't need it anymore. It had a 3.5" FDD, a monochrome display that blurred heavily on movement and a builtin trackball.
- _joel 5y agoYea, first lappy I owned (personally) was an inherited 486. Remember having to build slackware disksets for it and spending an age trying to userstand X11 docs to get a DE up.
- helge9210 5y agoSoviet Union had a technology of reverse engineering 286 chips by finely slicing them and looking at the implementation. This didn't work on the 386 and it was the end of the CPU industry in USSR/Russia.
- incanus77 5y agoLast year, right after the pandemic started, I acquired a left-for-years portable 386SX-based computer which I took to restoring to working order. I blogged it up and had a ton of fun, kicking off my retrocomputing hobby (now up to six machines): https://justinmiller.io/series/project-386/ https://justinmiller.io/series/project-386/
- aidenn0 5y ago> and the ability to use more memory, since most 286 boards topped out at 4MB or even 1MB, versus 16MB for a 386sx. Few people ever upgraded their 386SXs that far, but they liked having the option. "Few people ever upgraded their 386SXs that far" is a bit of an understatement. In 1990 2MB of ram cost about the same as a 386DX CPU. By 1992 ram had dropped to about $50/MB, but the Am386DX and the 486SX, both of which blew the i386SX out of the water were generally available at this point and cost less than 4MB of ram. One thing TFA doesn't mention is that the Am386SX (and SXL) had usage in battery powered applications for some time after this (not as common as today) due to their very thrifty power usage (with a fully static core, there was no lower limit on the clock-speed it could run at and it was lower power usage than Intel's SL when running at full speed).
- wazoox 5y agoI remember my Compaq 386SX 16Mhz with 2MB of RAM and 40MB hard drive. I played "UFO enemy unknown" a lot on it; the machine was so slow that at times the "Hidden enemy move" screen could stay up for a couple of minutes :)
- bluedino 5y agoSadly other low-end, crippled options like the Cyrix 486SLC took the 386SX's place.
- rasz 5y agoSurprisingly 486SLC wasnt all that bad https://www.youtube.com/watch?v=xGWjQzge42o https://www.youtube.com/watch?v=xGWjQzge42o Even faster than 386DX at same clock speed https://www.youtube.com/watch?v=ldYQQPYlRAU https://www.youtube.com/watch?v=ldYQQPYlRAU
- _nickwhite 5y agoThe SX was always better. I owned an AMD 286 40MHz and my friend’s 386SX 33MHz outperformed it in every measurable way. My jealousy overflowed!
- Narishma 5y agoThere was no 40MHz 286. It maxed out at 12MHz (Intel), 20MHz (AMD) or 25MHz (Harris).
- _nickwhite 5y agoWhoops, typo, I had an AMD 386/40 and my friend’s 386/33 kicked its ass. I _did_ actually also have an AMD 286, but it was 13MHz & had a whole 1MB of RAM.
- LargoLasskhyfv 5y agoDepending on your mainboard/chipset, CPU, and used ISA-cards, HDD-controller and VGA mostly, you could overclock.
- chungy 5y agoInteresting content, but light gray text on white is a poor choice for a website :(
- cronix 5y ago386sx 16mhz was my first (not family owned) personal computer that I received for college as a high school graduation present for software engineering. This was before having the internet in 1990. One of my favorite things that summer was, once I discovered Fractint, I loved making animated zooming fractal movies. It would take about 5-15 minutes to generate a single frame of julia at 640x480 resolution with my state of the art super cool video card with 512k of ram that could do 256 colors (most computers were still on 16 colors at the time). Then you'd zoom in a level and slightly move the viewport and render a new frame, and repeat for a few days. All manually. It took forever to make a clip even 5 seconds long. I saved up for the math coprocessor, and that thing was a game changer. It cut the processing times by at least half. I can really, really appreciate what a small, modern day cell phone is capable of in terms of compute and graphics power. Even smart watches are more powerful than my first computer.
- tapatio 5y agoYou sure this sweet machine is not going to waste?
- jgowdy 5y agoI had a 386SX 16mhz Packard Bell, so I was able to run Windows 3.1 in 386 Enhanced Mode like a boss.
- yazantapuz 5y agoThis bring me some fond memories from my childhood. My family had a 386SX-33 (an AMD clone). One of my best friend a 286 (Intel). He always told me that my computer feel slugish to him. Decades later at college I finally understood why :D
- zenron 5y agoMy 386SX 33mhz SMT was in a Victor 300SX which is a rebadge of the Tandy 1000 RSX that had the SMT 25mhz SX. Victor was sold by McDuff's, a subsidiary of Radio Shack. It barely ran the Doom demo but it did run. I ran OS/2 2.1 For Windows on it too at one point but eventually I build a home built Cyrix 486 DX40 that ran OS/2 Warp and Dos games like Doom at blistering speed. You couldn't run OS/2 2.1 on a 286 at all back then. I think the biggest issue of the 386SX was the data bus but I enjoyed my time with it. It is a bear to get modern storage to work with my Victor where as I see people with 286s on YT adding all sorts of modern goodies custom made for classic computers. It makes no sense why my Radioshack motherboard has problems with new modern tech and the 286s that I have seen don't but it may be due to bios issues. Atleast I had upgraded my 107mb hard disk in the Victor to a Maxtor 540mb drive and it worked with the software Maxtor had iirc though I lost the ability to play games if I was using MSDos at the time because it took too much HiMem. Those were the days. I really was stretched trying to get things running on that 386SX other than productivity software for Highschool... PS... My Highschool had IBM PS/2 Model 30's and 40's with Microchannel buses. So we couldn't sneak upgrading our PC lab computers with Joystick boards. At least we could learn Turbo Pascal.
- alberth 5y agoI have found memories of my first personal PC. A Packard Bell 486DX2 66Mhz.
- collaborative 5y agoI think that in terms of speed and performance we've hit a plateau but there is still room for improving physical space I imagine that our hand held devices will at some point replace our desktops alltogether, allowing plug and play wireless connections to our monitors, etc and letting us run the most advanced software & games directly on the same devices we currently use to text and make phone calls. But we're not there yet
- hansor 5y agoWoth to know that NetBSD(up to 4.0 ?) and Linux up to kernel 2.4(?) can work on 386SX with 4 MB of RAM. It's intresting that for some reason before ~2002 it was possible to run Linux(up to 2.0?) and NetBSD (for sure 1.6.1) at just 2MB of RAM. For some reason most modern operating systems requires 4MB of ram - even if kernel size is far less (like 700kb), as there is SOMETHING hardcoded in the kernel to prevent boot under 4MB of RAM. I think this could be due the "large memory pages" switch from 4kb to 4MB - but I never found anyone knowledge enough to confirm it :( Anyone? https://news.ycombinator.com/item?id=26979499 https://news.ycombinator.com/item?id=26979499
- anthk 5y agoGraphics buffers and kernel drivers. But NetBSD can be slimmed down in a really hard way. You just build the devices for your hardware and nothing more.
- LeoPanthera 5y agoLiteBSD runs in only 512KB, RetroBSD runs in 128KB. https://github.com/sergev/LiteBSD https://github.com/sergev/LiteBSD http://retrobsd.org/wiki/doku.php http://retrobsd.org/wiki/doku.php
- hansor 5y agoThey do not target x86
- AzzieElbab 5y ago386sx used to cause mountains of grief when compilers started to optimize for coprocessor. Tones of fun figuring out why a vendor's binary would suddenly crash or wouldnt start without any hints
- rasz 5y agothat would be 486sx
- kazinator 5y agoI coded some 3D demos using DJGPP on a 386/SX laptop that had two megs of RAM. :)
- userbinator 5y agoThe 386SX also has a 24-bit address bus, the same as a 286 - which limited it to 16MB of RAM, but that was a huge amount of RAM at the time.
- Turing_Machine 5y agoFor me the big deal was that by 1991 the 386SX motherboards were enough cheaper than the 386DX ones that I could afford to buy one just to screw around with a new OS that some crazy Finnish dude had written, which would not run on the 286.
- LargoLasskhyfv 5y agoDepending on the used software and OS a nice 286=>25Mhz with https://en.wikipedia.org/wiki/Chips_and_Technologies https://en.wikipedia.org/wiki/Chips_and_Technologies and https://en.wikipedia.org/wiki/Tseng_Labs_ET4000 https://en.wikipedia.org/wiki/Tseng_Labs_ET4000 was really fast. For instance Smalltalk/V 286 ran very well on it. Compared to a 386sx@25Mhz with more RAM.