3 ms·
Nice. Similar to the Liteplacer.[1] That project seems to have stagnated, but the hardware still seems to be for sale as a kit. The software is still available.
by Animats 5y ago
Nice. Similar to the Liteplacer.[1] That project seems to have stagnated, but the hardware still seems to be for sale as a kit. The software is still available.
The Liteplacer is unusual in that it doesn't use feeders. You just put the parts in little trays or tape down tapes of them, tell the software approximately where they are, and it locks on with its vision system and picks up the parts. This makes it useful for assembling prototypes.
Last site update in 2018, which isn't good.
One problem with the Liteplacer is that it comes as a kit, and you have to build a baseplate for it. They don't sell a baseplate with pre-drilled holes, which means getting precision alignment isn't easy. They should have had aluminum plates cut on a water jet to make a solid baseplate.
[1] https://liteplacer.com/ https://liteplacer.com/
- sitkack 5y agoI like the vision system in liteplacer, combine that with Index and you have a system that can do runs of 1-n. I have lots of parts that would take more time to setup in the feeder than it would take to do the board by hand. A 1" MDF board should make a fine base, aluminum is nice but not necessary.
- Animats 5y agoThe Liteplacer had a nice vision system. All open source, so you can reuse it with different mechanics. Someone wrote an application for it which reads part numbers and sorts parts.
- amelius 5y agoCan't a calibration step solve the precision alignment problem?
- sbierwagen 5y ago>Last site update in 2018, which isn't good. Looks like the software is still being updated: https://liteplacer.com/software-release-history-and-previous-versions/ https://liteplacer.com/software-release-history-and-previous... The owner seems to be active on the forum: https://liteplacer.com/phpBB/viewtopic.php?f=10&p=10292&sid=830407a17e1133c35ac03b233dba3e4e#p10292 https://liteplacer.com/phpBB/viewtopic.php?f=10&p=10292&sid=...