6 ms·
DIY Raspberry Pi 4 mini server includes UPS and OLED information display
- villgax 5y agoI'd kill for a 2 bay stable RPi NAS design which also includes physical buttons to power down the drives and works with a simple UPS using 20Ah USB power banks
- foxrider 5y agoI think you are describing Odroid HC
- fulafel 5y agoHow is the SW support, can you run a mainstream distribution like Ubuntu and get timely security updates for some years into the future without compromising on the device peripheral support? edit - https://wiki.odroid.com/odroid-c4/software https://wiki.odroid.com/odroid-c4/software sounds like you're going to be running their fork of Ubuntu or Android without the abovementioned guarantees for updates
- foxrider 5y agoEvery time you see a SoC just check if Armbian supports it. This is the case here https://www.armbian.com/odroid-hc4/ https://www.armbian.com/odroid-hc4/, and if there is Armbian for it you can just use the Armbian sources to build the kernel for any other distro with ARM support. Including Archlinux ARM, NixOS and so on. Once you know enough about u-boot it's very easy to run any distro provided you have a kernel for it.
- fulafel 5y agoThanks. But I don't want to build kernels as part of normal operation once it's set up, I want the device to last its expected useful lifetime with just periodic apt updates. This means a LTS distro that ships kernels for the device. Otherwise the setup is fail-open security wise, depending on my constant active tinkering. Maybe Odroid happen to be exceptionally good and the vendor provided Ubuntu fork is good enough for this, but I don't see an easy way to check their track record over a longer timespan and for devices that are several generations behind their latest and greatest.
- villgax 5y agoDamn, I didn't know they came out with that toaster!! Thanks!
- puzzlingcaptcha 5y agoThe problem with RPi is that you would be doing SATA over USB 3.0. It will work, but it's not great. Other SoC typically have just one native SATA link (like A20). SoCs with better connectivity exist - that's what ends up in consumer NAS products after all - but SBCs are sparse and expensive (e.g. MachiattoBIN). You could go for a CM module and do your own expansion board with a SATA controller on PCIe but then you may run up against the x1 bandwidth (if it's PCIe 2.0 then probably fine for two drives). ROCKPro64 has a x4 PCIe slot you could use with an HBA card I guess. But at this point I'd probably go for a Celeron ITX board. Some time ago I would suggest just getting a second-hand NAS and running Debian on it (like QNAP TS-219P) but with Debian 11 dropping support it is less appealing.
- megous 5y agoQuartz64 has native SATA. Other similar rockchip 35xx SoC based SBCs may have up to 3x native SATA port options. So the future is slightly brighter. Someone will probably make 2x - 3x SATA board at the expense of USB 3 port, or use some external PCIe<->SATA controller to add even more. There may even be support for ECC DRAM. https://www.cnx-software.com/2020/12/16/rockchip-rk3566-and-rk3568-datasheets-and-features-comparison/ https://www.cnx-software.com/2020/12/16/rockchip-rk3566-and-...
- ivolimmen 5y agoI would go for a Rock64pro with NASCase: https://pine64.com/product/rockpro64-metal-desktop-nas-casing/ https://pine64.com/product/rockpro64-metal-desktop-nas-casin... Just look on the internet for NAS and pine64.
- qwerty456127 5y agoI wish Raspberry 5 would get a couple of additional USB3 ports facing upward so we could still use the sideways USB ports the way they are meant to and also attach something inside such a chassis.
- tsjq 5y agoWhen is RPi 5 due?
- NortySpock 5y agoI don't think the company has even announced an intention to work on a theoretical RPi 5, and given their shift in direction towards the Pico and RPi 4 CM (compute model) variants, they may not be looking in that direction at all.
- NortySpock 5y agoFollowup with a recent new article: looks like they're working on an RPi 4A, a new touchscreen, with very nebulous plans for an RPi 5. https://www.notebookcheck.net/The-Raspberry-Pi-Foundation-reveals-details-on-its-next-single-board-computers-including-PCIe-support.551607.0.html https://www.notebookcheck.net/The-Raspberry-Pi-Foundation-re...
- sschueller 5y agoThese are quite cool as well https://www.uctronics.com/raspberry-pi-4b-rack-mount-19-inch-1u-with-poe-and-oled-screen.html https://www.uctronics.com/raspberry-pi-4b-rack-mount-19-inch...
- nbernard 5y agoIndeed. Yet, if you go the DIY route, I believe you can get more versatility / density with something like this: https://www.thingiverse.com/thing:1793758 https://www.thingiverse.com/thing:1793758
- deleted 5y ago[deleted]
- hughrr 5y agoThis is neat from a creative perspective. But I have to ask these days: why not just use a laptop? It’s got a flip out console, built in UPS that can last hours, proper storage and power supply. Unless you need some GPIO or something I wouldn’t bother. Edit: my home server is a Lenovo T440 junker which the main battery doesn’t charge any more as the polyfuse popped. Has 12Gb RAM and an i5. The internal battery is still good though. So I stuffed a 1Tb SSD in it, installed Debian and disabled the lid close event and job done.
- bullen 5y agoMainly because the raspberry 4 is the most powerful and cheapest (2Gflops/W CPU for ~$45) device that has less than 10W total consumption and has a GPU that does not clutter that power draw too much (~1W). This means it's the ideal low power server device for home hosting with lead-acid backup if you can get 1Gb/s up+down fiber! Unless you need quality disk, then you should probably look elsewhere too, but a 1TB SanDisc SD card har pretty low power draw; atleast it has got that working for it. But you need better ergonomics than this, sealing it is a sure way to overheating. I'm working on the final design of my raspberry cluster: http://move.rupy.se/file/final_pi_2_4_hybrid.png http://move.rupy.se/file/final_pi_2_4_hybrid.png
- dijit 5y agoI don't buy it. I'm actually a large fan of the Pi but people seem to think it's lower power than it actually is: but the performance trade-off is real. the -peak- power consumption of a Pi is 15W (but it's difficult finding an adapter which will supply that). So if we're talking peak power consumption the Pi would win because most decent quality mobile x86 chips draw something like 15w by themselves at peak, but if you look at something with the m3-8100y[0] then you've got a CPU that draws 5w at peak, and has 10 PCIe lanes instead of just 1. they have boards with this kind of platform: https://www.dfrobot.com/product-1404.html https://www.dfrobot.com/product-1404.html If you're looking to get a super low energy homeserver these absolutely dominate on peak usage. But, a rpi and a laptop are roughly comparable in terms of idle power consumption. Unless it's like a gaming laptop or something. Mine draws 3w during "idle"* from the wall and I have a Xeon E3-1505M v6 (45W TDP). [0]: https://ark.intel.com/content/www/us/en/ark/products/185282/intel-core-m3-8100y-processor-4m-cache-up-to-3-40-ghz.html https://ark.intel.com/content/www/us/en/ark/products/185282/... - "idle" meaning with a few containers, a window manager, the screen turned on and wifi enabled/connected.
- abraae 5y agoGetting into 3d printing has ruined tech porn like this for me. Before I would have seen a high tech shiny case. Now I just see z axis binding artifacts between the port cutouts.
- imtringued 5y ago3D printed parts look great if you have a bad camera. You won't see the layer lines!
- danparsonson 5y agoLooks like a better link would be https://www.the-diy-life.com/mini-raspberry-pi-server-with-built-in-ups/ https://www.the-diy-life.com/mini-raspberry-pi-server-with-b... as this is the actual project article.
- antattack 5y agoIt's a shame that there's no version of rpi with PCIe. Hopefully rpi 5 will have PCIe option.
- mattowen_uk 5y agoThe Raspberry Pi 4 Compute Module can be installed onto several carrier boards that offer PCIe - Check out Jeff Geerlings channel on YouTube.
- Denatonium 5y agoThis looks like a cool setup, but I can't help but think that an OLED display might not have been the best choice for displaying static text for long periods of time. Burn-in seems inevitable.
- agravier 5y agoDo you know of an eink alternative that's easy to set up both hardware and software wise?
- Denatonium 5y agoI never used a screen on my Pi, so I don't know of any specific models. An LCD display with an adjustable backlight could also work; when the power goes out, the UPS could tell the Pi to lower its backlight to save power.
- wang_li 5y agoOne like this seems readymade for the pi. https://www.amazon.com/Resolution-Electronic-Controller-Interface-Raspberry/dp/B07DH6K1VQ https://www.amazon.com/Resolution-Electronic-Controller-Inte...