11 ms·
Download speeds: What Do 2G, 3G, 4G and 5G mean?
- natch 5y agoMeantime the broadband industry continues to exploit the confusion between 2G / 5G (cellular technologies) and 2GHz / 5GHz (WiFi technologies) and tell people (specifically my neighbors for example) that they will get faster speeds if they use the “5G” network exposed by their wifi router. If this article addresses that confusion I didn’t see where.
- trangus_1985 5y agoHey, kinda complicated. The reason they're telling people to use the "5G" network on their access point isn't originated in confusion about 2G/5G (although for sure some people ARE confused). The reason they're doing it is that one way people test their internet is go to a download speed tester, and to prevent complaints and confusion, the ISP wants the fastest download possible. The 2.4GHz band is incredibly noisy, and even a microwave running in an adjacent unit can tank your throughput. 5GHz doesn't penetrate walls as well as 2.4GHz, which means less noise in your house. So an excellent, easy way (for average consumers) to test WAN throughput is by using the 5GHz network with line of sight. The intent and origination is not 5G confusion, but rather 5GHz's increased bandwidth due to a lower noise environment in the average user's house. And actually, in a way "get faster speeds if they use the “5G” network exposed by their wifi router" is true: if you live in dense housing, between all of the devices spamming on 2.4 and the fact that walls "quiet" 5GHz reasonably effectively, using 5GHz can actually be a marked improvement for many users!
- Dylan16807 5y agoWhat's really exciting for that sort of conflation is that wifi 6 does not support 6GHz, but wifi 6E does.
- trangus_1985 5y agoYou know, the only thing I actually care about is WPA 3. This stuff is fast enough. I mean yeah, it could be faster, more users, etc. I guess it doesn't realllly matter for home users, sure does for businesses and high usage environments. I'm just being frank though.
- axaxs 5y agoNot just noise..most modern routers allocate more bandwidth to 5ghz. So it is, in a literal sense, faster.
- Dylan16807 5y ago> allocate more bandwidth Do you mean the channel width? Quite possible, but whether that matters depends on whether your internet is faster than your wifi. If you mean allocating portions of your internet bandwidth, that shouldn't happen should it? Any connection method should have access to all of it.
- axaxs 5y agoNot overcomplicating things intentionally. There's other reasons of course...standards, shorter wavelengths, etc. Not referring to priority(second point) but capacity. Tri band routers as I'm sure you're aware dedicate two radios to the 5ghz range, and one to 2.4ghz. If you have say, gigabit internet, your capable bandwidth on 5ghz will be much, much faster, regardless if there's any 2.4ghz interference. If anyone who isn't a radios expert cares... I prefer dongknows when reading about networks. A lot of people for some reason don't seem to like him, but he does a great job of both putting things simply, yet giving enough backing technical specs to not treat the reader like a child. example: https://dongknows.com/home-wi-fi-explained/ https://dongknows.com/home-wi-fi-explained/
- trangus_1985 5y agoWell, there's channel bonding, and wider channels, and a ton of stuff happening in the later standards (AX, 6) that I'm not up to date on, but... I'm pretty sure they get away with cramming more onto 5 largely because of the reduced noise.
- dboreham 5y agoThere is much more spectrum available in 5GHz and that's the overwhelming reason why it can be "faster". Doesn't go through stone walls though...
- 5y ago
- coin 5y ago> The intent and origination is not 5G confusion, but rather 5GHz's increased bandwidth due to a lower noise environment in the average user's house Then why write 5 GHz as “5G”, dropping the unit?
- natch 5y agoI’m talking about cases where the broadband is the bottleneck, obviously. These are people who do not own a microwave or TV (they’re lucky to have a flush toilet) and their nearest neighbor is far enough away that the neighbor’s WiFi is undetectable, so the issues you mention do not apply. Yet they are told by an installer who does a physical visit to the place to put in a dish that choosing the 5GHz WiFi will make a difference. It won’t.
- huachimingo 5y agoThen you have the KB and KiB thingy.
- laumars 5y ago1000^n is only really used by HDD manufacturers to make their storage look larger. Everyone else uses 1024^n. XiB was invented to solve the confusion of everyone using XB but adoption was low and personally I think XiB is more confusing anyways (given people naturally assume XB is 1024^n). I think what confuses consumers more is byte vs bit, or more specifically, that the capitalisation of the ‘B’ matters.
- belgesel 5y agoI do use 1000^n, but I agree that most people tend to use 1024^n. 1000^n kind of makes more sense since "kilo, mega" etc. are the actual SI prefixes for multiples of 1000s. I don't know who or what caused this chaos but 1000^n is definitely more human friendly.
- throwaway2a02 5y ago> 1000^n is definitely more human friendly. It may be more human friendly, but 1024^n is more programmer friendly, especially at the low level.
- varjag 5y agoYes, powers of two match physical reality of binary computer architectures, while powers of ten in computing are a marketing concept.
- laumars 5y ago1000^n might be more human friendly but computers aren’t decimal machines and a byte isn’t 10bits. 1024^n technically makes sense as a unit for binary machines that have 8bits to a byte. Everyone was happy with 1024^n convention in the 80s. The problem was HDD manufacturers got greedy and switched to 1000^n to make their drives sound like they had more storage. Thats what started the confusion.
- NavinF 5y ago> tell people (specifically my neighbors for example) that they will get faster speeds if they use the “5G” network exposed by their wifi router Of course you get higher speeds on 5ghz! How is this controversial? Most people are still on 802.11ac which only works on 5ghz. It's also impossible to find a free channel on 2.4ghz unless you live in the woods so you'd be sharing airtime with the 10 other APs and all their clients on one of the 3 non-overlapping channels in the 2.4ghz band. On 5ghz you can easily run 80mhz channels instead of just barely getting a stable connection on 20mhz.
- chrismorgan 5y agoNear the edge of a signal’s range, its performance and reliability can plummet as signal loss causes trouble. 5GHz has a much lower effective range than 2.4GHz. Thus, there are areas where the 5GHz network will be available, but perform far worse than the 2.4GHz, even with congested 2.4GHz. (Still worse, in some devices it can cause persistent problems until reboot. My last laptop, a Surface Book, had a Realtek chip, and I was using it near the edge of a router’s range for hours a day last year, and every few days it’d get into a broken state where packet loss was >20% and latency a few hundred milliseconds, even if I moved right next to the router. Connecting to different networks wouldn’t fix it; sleeping the laptop wouldn’t fix it; disabling and reenabling the thing in Device Manager would normally but not quite always fix it; rebooting would always fix it.)
- NavinF 5y agoYeah that sucks. Good WiFi performance pretty much requires having an AP every other room. Besides your hardware problems and signal power loss, devices don't cooperate to share spectrum and can't see all the nodes: https://en.m.wikipedia.org/wiki/Hidden_node_problem https://en.m.wikipedia.org/wiki/Hidden_node_problem
- cptskippy 5y agoThey're not exploiting anything, they didn't choose the names for cellular or WiFi technologies. At worst they'll say 5G instead of 5 Gigahertz but they're not attempting to confuse or conflate anything. Think of your internet connection like the water coming into your home. Your 2.4Ghz connection is like the water dispenser on your refrigerator, and 5Ghz is like the hose bib on the outside of your house. If the water authority says the water pressure is enough to fill up a 5 gallon bucket in 1 minute, someone will call up complaining that it takes 20 minutes to fill up a 5 gallon bucket from the water dispenser on their refrigerator. Your ISP telling you to use your 5Ghz Wifi to test, is like the water authority telling you to test with the hose bib on the outside of your house.
- Nextgrid 5y agoHaving separate SSIDs for the two technologies is stupid in itself. In the majority of cases you're better off using the same SSID (and encryption settings) which means the client device can decide which one to use and whether to switch between the two. There are cases where the client device stubbornly clings on to the 5Ghz network despite the signal being so terrible that no packets come through (more specifically, the packets from the access point to the device are still received, but the packets from the device to the access point are lost), but unless you've identified that you're in this case and can't mitigate it any other way you're still better off using a single SSID.
- xaduha 5y agoIt talks about reduced latency, but doesn't describe how it is achieved and why there's such a jump from 50ms to 1ms. https://www.digi.com/blog/post/5g-network-architecture https://www.digi.com/blog/post/5g-network-architecture "Difference between 4G and 5G Network Architecture" section (no id sadly) Basically there should be less tunneling, as far as I understand.
- belgesel 5y agoYou are right. In 5G, data packets goes through less tunneling than it was before. Although there is less tunneling, 1ms latency for "end to end" or from user device to the Internet doesn't sound realistic. I have no real life measurements but if I would have to guess, it should be around 5~10 ms.
- hocuspocus 5y agoMore like 10-15 ms in practice, on sub-6 bands at least.
- unmole 5y agoYou sometimes see the same happen in IPv4 vs IPv6 networks.
- Dylan16807 5y agoThis doesn't have the answer I expected to see, which is that "2G speed" is often used in terms of throttling, and in that case it usually means 128Kbps. (There's no real consensus on what 3G speeds would be in this context, but carriers tend to aim low.)
- daveoc64 5y agoThis article is written about UK networks, where none of the networks advertise data as being available at "2G speed". The only thing I can think of in the UK that's similar is, the "Always On" offering from giffgaff, an MVNO (https://www.giffgaff.com/help/articles/what-does-always-on-mean https://www.giffgaff.com/help/articles/what-does-always-on-m...). It offers 80GB of data per month at full speeds, then unlimited data at 384kbps. The UK networks generally offer either a fixed data limit, or truly unlimited data plans.
- LeoPanthera 5y agoWhat this doesn't address is that networks allocate more bandwidth to newer technologies, which means the older ones get slower over time. The speed you'll get on 3G (and probably even 4G) today is much slower than you used to get when those technologies were new.
- yipbub 5y agoI'd rather someone explain if/why they're wrong than downvote them please.
- LeoPanthera 5y agoAs far as I know there's nothing in this article that is "wrong", it's just that ultimately when networks support multiple technologies they can choose where to allocate the available bandwidth, and where not to allocate it, and they usually favor whatever is newest.
- yipbub 5y agoSomebody had downvoted you, not the article. I wanted to know what they had against your point :)
- LeoPanthera 5y ago...oh. :)
- Dylan16807 5y agoEven assuming everything else is equal infrastructure-wise, that's not true. The allocations on older techs will shrink, but so will the number of users. The speed you get could be slower but it could also be faster.
- hulitu 5y agoIn some countries (DE) this is not true. Here they apply the law of the hole i.e. the new technology is inserted where is a hole in coverage. That has a very good marketing value ( look, we have 5G) and regulatory value (look, we have 98% coverage). For the end user it is a disaster: in a given area only one technology might work. But they say in the future we will all be connected.
- fastball 5y agoOne thing I think missing from this article is a discussion on range. The important thing to note with all EM-based communication tech is that the range decreases as the bandwidth increases, due to the inversely proportional nature of wavelength and frequency. So it's all trade-offs. 5G requires a lot of buildout, as its range is something like 1000 feet, whereas 4g is something like 50,000ft. Said another way, we could've started with 5G before doing 3g/4g etc, it just would not have made economic sense before everyone had a smartphone that they wanted to stream HD videos on which justifies building out a network that needs a tower every 2000ft.
- rhn_mk1 5y ago> 5G requires a lot of buildout, as its range is something like 1000 feet Only part of 5G has the high frequencies with short range. As the article highlights, there are also frequencies similar to 4G, meaning that it's entirely feasible to build a 5G network in the same time frame.
- fastball 5y agoRight but those aren't going to be the high bandwidth 5g highlighted in the article.
- KingOfCoders 5y agoPhones are so different. I've recently had two 5G phones, a Xiaomi Mi 11 Lite 5G and a Realme GT. The Xiaomi could do 20-30mbit/s (slower than my 4G OnePlus 6T at 35mbit/s), while the Realme GT is around 250-280mbit/s. I've kept the Realme.
- sgt101 5y agoThis is meaningless without explaining the contention issue wrt. radio and the different strategies the later standards have for handling that. 5G is a range of tech, most of which has not come to market yet (mmwave, full on MIMO) the network core standards are very helpful for telcos - but the way that modern antenna can be made to behave does change what the tech can do in busy cells, but it doesn't change physics!
- m12k 5y agoLooks like the move from 3G to 4G also meant going from "real speeds are 1/5th of theoretical max" to "real speeds are 1/10th of theoretical max". I wonder if that's due to congestion at the phone-to-tower level, congestion at the tower-to-internet level, or due to newer wireless tech just having higher peak performance at optimal physical conditions (e.g. line of sight) that are becoming increasingly hard to actually accomplish in practice?
- timeinput 5y agoI think the primary driver is higher peak performance. With OFDM on 4G and 5G you can have very wide bandwidths for a given tower, and small, but high QoS allocations for voice, or high bandwidth for video streaming. With 3G you had similar flexibility, but the peak RF bandwidth was ~3.84 MHz compared to ~40 MHz of 4G). This is doubly so with 5G. The maximum allocation is potentially huge from a time and (RF) bandwidth point of view, but an HD video stream is still limited.
- mytailorisrich 5y agoThe aim is also to increase capacity because of the ever increasing number of mobile devices. Increasing capacity means increasing the number of devices that may connect to a single base station (aka "tower") at any given time. This was true when moving from 3G to 4G, and this is also true when moving from 4G to 5G, though with 5G there is an emphasis on a very large number of devices with relatively low data rates (in order to accommodate IOT scenarios).
- cptskippy 5y ago> I wonder if that's due to congestion at the phone-to-tower level, congestion at the tower-to-internet level, or due to newer wireless tech just having higher peak performance at optimal physical conditions (e.g. line of sight) that are becoming increasingly hard to actually accomplish in practice? I believe this is entirely configurable by the carrier. As others have pointed out, the primary driver of each successive generation is to support more clients. Increasing individual client bandwidth is a secondary motivation.
- seszett 5y agoI don't understand where the "typical" speeds come from. For me, typical speed on 4G is 100 Mbit/s in Belgium while it is 30 Mbit/s on 4G+ in France. Same plan and phone, just roaming in Belgium (where I live, but I mostly use my French SIM) and in a city centre both times. So it seems to me to depend a lot on the operator and infrastructure, and I don't see how there is one typical speed to quote.
- ryanmcdonough 5y agoHe is based in the UK and his site almost exclusivly covers UK networks with a UK user base reading the posts - so the "typical" speeds would be for the UK.
- iagovar 5y agoYeah. Your ISP may connect the BTS by a fiber link, or radio link, or it may have X or Y simultaneous users, etc. There's a lot of elements in the chain. What would be interesting is that apparently a 5G BTS can deal with a lot more users simultaneously, so ISPs may connect them with 2.5G links and provide decent speed of all of them, alleviating saturation problems.
- slver 5y agoTypical speeds for "current G + 1" is always high and mysteriously gets significantly lower when "current G + 2" gets introduced. Rinse and repeat. I'm not sure how come everyone is so highly interested in this churn of networking equipment, it's especially bizarre that telecoms are interested in it (it's a major expense for them), but there you go. To me 5G is a bit like IPv6. Technically it's better, technically we need it, but in practice we're good enough already. And this is why still a lot of Internet is on IPv4. But thanks to this constant marketing, 5G doesn't have this issue. I'm neutral about it, but I can't care less if my next phone has 5G or not.
- keithwinstein 5y agoI'm not an expert in UMTS-style cellular networks, but I think the numbers in this article are misguided or incorrect. :-( E.g., the article seems to conflate "Internet-style" measurements of practical round-trip latency over a network path, with "telecom-style" measurements of round-trip latency across a single unloaded radio hop with immediate schedule availability. E.g. it gives a figure of "50ms" for the typical latency of 4G, and "1ms" for the typical latency of 5G. I don't think this is an acceptable comparison. "50ms" is a believable ICMP ping time from a commercial LTE service, including delay to get a resource block, to sojourn queues inside the network, etc. (I just tried on T-Mobile LTE and am getting 21-69 milliseconds RTT, mean 36 ms, to the next hop.) By contrast, "1ms" for 5G sounds like a 3GPP "user plane latency" figure (and even then, only for the "uRLLC" version of 5G that is probably only going to be used for more-exotic purposes). This is a lower-level latency measurement made on a single unloaded radio hop. You cannot compare the two. I think the more-accurate 3GPP user-plane latency figures would be: - LTE: about 5-6 ms (see https://communities.theiet.org/blogs/426/444 https://communities.theiet.org/blogs/426/444 or https://www.techplayon.com/5g-nr-user-plane-latency/ https://www.techplayon.com/5g-nr-user-plane-latency/ or https://www.artizanetworks.com/resources/tutorials/req_lte.html https://www.artizanetworks.com/resources/tutorials/req_lte.h...) - 5G eMBB ("mobile broadband" service ): about 3-4 ms (https://www.techplayon.com/5g-nr-user-plane-latency/ https://www.techplayon.com/5g-nr-user-plane-latency/ , https://www.itu.int/en/ITU-R/Documents/ITU-R-FAQ-IMT.pdf https://www.itu.int/en/ITU-R/Documents/ITU-R-FAQ-IMT.pdf) - 5G uRLLC ("Ultra-reliable low-latency communication"): about 0.2-0.7 ms (see above) The practical IP round-trip time with all of these networks is much larger than the above; e.g. ~21-69 ms for LTE, and 22-76 ms for 5G eMBB services (https://www.lightreading.com/the-edge/how-5g-is-pushing-envelope-on-latency-/d/d-id/766273 https://www.lightreading.com/the-edge/how-5g-is-pushing-enve...). And even those figures are in the absence of load to or from the UE; if traffic has filled up the queue of the uplink (on the baseband chip) or downlink (in the UE-specific queue on the base station/eNodeB/gNodeB), users can experience latencies of 500+ milliseconds. This is called "bufferbloat" and it comes from a refusal by the baseband and eNodeB/gNodeB vendors to deploy queue disciplines that queue on a per-flow basis, or mark or drop packets when queues are large. (I have talked to many vendors about this, and the prevailing attitude is somewhere between "we are the phone company; we're legally obligated to transmit 99.999% of all packets to the endpoint, no matter how delayed everything gets" and "if there were an actual problem with latencies over our networks, companies would be coming to us like Facebook did and paying us a bajillion dollars to deploy custom traffic rules to let their traffic skip the line; nobody else has offered us this kind of money for a custom traffic rule, ergo there is no problem.") Similarly, the article seems to somewhat conflate improvements in theoretical throughputs with improvements in the "typical download speed" a user might experience. The latter is not that strongly related to the air interface standard (e.g. LTE or 5G-NR) because any flow's experience depends heavily on how many other flows are sharing the same constrained resource, which in turn depends on (a) how much spectrum has the carrier licensed in your area, (b) how many base stations has the carrier decided to build/lease in your area, (c) how many other customers does this carrier have, trying to download right now through this base station, on this slice of spectrum, at this moment, and of course (d) is the base station actually close to you [do you have good SNR?] or is it spending all its airtime on slower modulation and coding? Carriers sometimes use improvements in the air interface (which improve throughput-per-Hz) to save money by deploying less spectrum or larger cells. So even if a newer/fancier air interface is x% faster on a per-Hz basis, the benefits may not fully accrue to the users, if the carrier takes advantage of the improvement to deploy bigger cells, or less spectrum per cell, etc. (I once sat in a meeting with AT&T around the time of the 3G-to-4G transition, and in at least this particular setting, they were planning for roughly 1/3 of the improved spectrum efficiency to accrue towards better service for their users, and the remaining 2/3 towards saving resources for themselves. So, yes, improvements in technology do somewhat improve service for users, but... in some cases that may be a minority of the overall benefit.) For more rants on this topic: http://blog.keithw.org/2013/07/3g-and-me.html http://blog.keithw.org/2013/07/3g-and-me.html https://www.marketplace.org/2010/11/05/tech/4g-networks-dont-exist-or-do-they/ https://www.marketplace.org/2010/11/05/tech/4g-networks-dont... And, obligatory plug! In September, the IAB is holding a workshop on Measuring Network Quality for End-Users (https://www.iab.org/activities/workshops/network-quality/ https://www.iab.org/activities/workshops/network-quality/), with submissions due August 2. If you care about this stuff, and maybe you know something or have a perspective that could be helpful to the Internet community, please consider submitting to and participating in the workshop.
- Cthulhu_ 5y agoDespite what they want you to believe, 5G is still very far away; it'll require a full rebuild of some mobile networks and their back-end systems. A term to look for is "5G Core Network", which is basically "5G native". But there's very few providers that have that - simply because there's few hard- and software providers that can deliver the supplies needed. 5G covers a lot: https://www.3gpp.org/dynareport/SpecList.htm?release=Rel-15&tech=4&ts=1&tr=0 https://www.3gpp.org/dynareport/SpecList.htm?release=Rel-15&... Disclaimer: I currently work for a player in the mobile networking space. Our software solution can act as a bridge between older and newer "g" systems and implements various aspects of these mobile networks. For our 5G offering we've just included cURL as a library, apparently (I'm not involved in our core system, just the configuration interface).
- dfox 5y agoIn my understanding the diference between deploying 5G-NR-NSA and SA is mostly an software one. You need to have 5G capable RRU heads anyway. On the other hand from the bussiness and operations side there are two things: (1) 5G-NR-SA does not have any obvious benefits when you still have to support LTE-only UEs (and even GSM-only ones). (2) Many hardware vendors and carriers combine the 5G rollout with bunch of only tangetially related network changes like getting rid of ZTE/Huawei equipment, various "k8s on the edge" initiatives and such.
- discordance 5y agoPerhaps the 5G prophecy hasn't been entirely fulfilled yet, but I am super impressed by what we have so far. Here in Sydney on Telstra in a pretty low density suburb I am getting 400mbps down while indoors (4/5 bars reception). The other day in an area with 5/5 bars reception area I got 1164/89mbps, while indoors, which is incredible. Latency is between 10 - 20ms.
- stavros 5y agoSo are these the basic advantages? Bandwidth and latency? Some TV ads here tout 5G as "comparable to the invention of electricity", which seems to me mind-numbingly ridiculous, but I was wondering if there's some huge benefit that I'm missing.
- teeray 5y agoA big benefit not mentioned is usage in high density environments—think stadiums. The idea there is to stick multiple mmWave antennas over the stands. Those have very short range and high bandwidth (you can kind of think of them like radar that can communicate with you). I am personally excited for this use case since the base of the ski area that I frequent during the winter is serviced by one macro cell for an entire region including that ski area. On a busy day, the network is useless by 11am apart from calling and SMS (which are prioritized differently).
- stavros 5y agoAh, yes, I think I heard of these microcells. That is indeed exciting, as my house gets no reception, it would be great to deploy a cell in the area and have reception again.
- axiosgunnar 5y agoGood intro article, but > For instance, a connected car travelling on the motorway at 70mph (110km/h) would travel almost 2 meters in the amount of time it takes for a 4G mobile network to respond. The lower latency of a 5G connection will allow mobile technology to be used more safely in cars. God please no!
- ViViDboarder 5y agoAll this is further confused by the deceptive marketing from carriers. Frequently calling HSPA+ 4G and now AT&T’s 5Ge branding makes for some very frustrating conversations with folks unfamiliar. “Oh, it looks like I got 5G with a software update!”
- sunstone 5y agoAt each new technology step the data rate increases and so does the number of base stations.
- WanderPanda 5y agoNow I'm wondering if there is something like the "what Andy giveth, Bill taketh away" for mobile communications?
- Nextgrid 5y agoAnd so the number of ads.
- fsiefken 5y agoI'd like to know how the average battery life and power requirements are of the different standards. For example, I've got a 5G phone but to spare power I sometimes switch to 3G or 4G even though I don't really know if it's really more power efficient. I suppose 5G has a lot of power efficiency techniques built in as well which are not in 3G or 4G.
- vessel 5y agoI'd like to know this too. I can tell you anecdotally that 4G (LTE at least) is a major battery drain if you have very weak 1-bar signal. I work in a basement and my phone is dead by 5pm unless I remember to turn on airplane mode.
- teeray 5y agoYou would do well to enable Wi-Fi calling in that circumstance if your provider offers the service. I had a misconception that that service was somehow inferior to getting a “real” connection to the cell network—not so. The cell network does not care how you access it, and more-or-less treats RATs (Radio Access Technolgies) as interchangeable.
- jokoon 5y agoLong range wireless data is subject to a tons of interference and real life troubles, so in reality you never hit those numbers, there will be so many places without proper coverage that those stats are mostly meaningless. Not to mention it requires a lot of antennas, hardware, power and area coverage. Results will also vary depending on the phone modem. Real life wireless latency is also quite problematic. If it's never ideal on optic fiber, I cannot predict it's going to be good on wireless. Not to mention rural, uncrowded areas, mountains, etc.
- coin 5y agoWay too many ads on that webpage
- k__ 5y agoWhat's HNs page size recommendation to be ready in <10sec on typical Edge?
- fsckboy 5y agothose speeds mean that each new generation will be substantially faster than the previous generation, because each generation dramatically underperformed what it promised. so, it works like this: 2G delivered 1G speeds, but it delivered them better than 1G did. then, 3G delivered 2G speeds, which was much faster than the 1G that 2G delivered! and so on. it's called "marketing", it's "aspirational", lather, rinse, repeat
- justshowpost 5y agoThis is misleading, 2G """speed""" was 0.0096 Mbit/s half-duplex. It was possible to do some urgent work at terminal server for the ridiculous price, tho. The further improvements were highly dependent how many time-slots network leases to you, up to ~0.24 Mbit/s. Dumbing things down to that nG naming doesn't work very well... That's it for the TDMA guts, next week – library subscription fees.
- ChrisArchitect 5y ago(2018)