10 ms·
Fire Destroys 300mm Line of Renesas’ Naka Factory
- barbegal 6y agoThis should of course be 300nm not 300mm referring to nominal feature size on the silicon. Edit: I'm wrong 300mm refers to the wafer size and the later reference in the article to 200nm should be 200mm.
- philipkglass 6y ago300 mm is correct. It refers to the wafer size. https://en.wikipedia.org/wiki/Wafer_(electronics)#Standard_wafer_sizes https://en.wikipedia.org/wiki/Wafer_(electronics)#Standard_w...
- rossdavidh 6y agoAre we sure that it's not 300mm, referring to size of the wafer? Although I'm not sure automotive silicon normally takes place in 300mm fabs...
- andrewflnr 6y agoThey use 200nm later in the article, but wikipedia[0] says that 300mm is a standard wafer size, and fabs are classified by the diameter of wafer, so you might be right. I assumed it was the feature size before, too. [0] https://en.wikipedia.org/wiki/Wafer_(electronics) https://en.wikipedia.org/wiki/Wafer_(electronics)
- terramex 6y agoNo, 300mm is correct and refers to physical size of whole silicon wafer[1]. 300mm (commonly known as 12") is currently the biggest class of silicon wafers. Naka factory was producing 300mm wafers using 28nm process [2]. [1] https://en.wikipedia.org/wiki/Wafer_(electronics)#Standard_wafer_sizes https://en.wikipedia.org/wiki/Wafer_(electronics)#Standard_w... [2] https://en.wikipedia.org/wiki/List_of_semiconductor_fabrication_plants https://en.wikipedia.org/wiki/List_of_semiconductor_fabricat...
- skunkworker 6y agoAre you sure? It’s a 300mm wafer fab. Here’s another article that outlines their current fab wafer size. https://www.eetimes.com/renesas-to-expand-300-mm-fab-in-90-65-nm-push/ https://www.eetimes.com/renesas-to-expand-300-mm-fab-in-90-6...
- centimeter 6y agoIt's confusing because they refer to "200nm" in the same article.
- jandrese 6y agoOuch. Automakers were already struggling with chip supply. This is going to shut down production lines.
- deleted 6y ago[deleted]
- centimeter 6y agoIt was really difficult for me to buy a new car last year. Customized orders are totally impossible right now. Whatever they might have in stock (or have arriving soon), that's what you can choose from.
- yabones 6y agoAlready has... I know some people who work IT for a large automotive facility in Ontario that have been laid off for 3-4 weeks already. It really feels like nobody appreciated just how critical to all aspects of our lives semiconductors have become - tiny little chips have caused heavy industry to grind to a halt in some places.
- jacquesm 6y agoNothing like industry heavyweights offloading their mistakes onto the common folk.
- oh_sigh 6y agoSince cars generally have a large physical space for chips and ample power, why don't automakers just use chips from older fabs?
- baybal2 6y agoRedesign, and re-certify a car selling at less than 10% markup. You will be underwater for the car's entire remaining lifetime on the market.
- 6y ago
- waiseristy 6y agoWe as a society are going to have to reckon with how fragile our silicon supply chain is eventually... It seems like every other year we hear about a fab fire here, or a fab flooding there, and then seeing prices rise by 200% for months.
- ISL 6y agoI think that reckoning has already begun. The number of countries requiring that fabs be built locally continues to grow.
- deleted 6y ago[deleted]
- post_break 6y agoThis is horrible. What keeps me up at night is thinking about TSMC. One company. Just needs an earth quake, fire, explosion, something and the whole world is crippled. I know we have samsung, intel, etc other fabs. But if TSMC ever went down it would make the thailand floods for hard drives look like a joke.
- whatshisface 6y agoIt might even be a good investment to build a fab just to clean up in the event of a shortage. Kind of like how if anyone in Texas had the good foresight to winterize they could have made a year of profit in a few days...
- dnautics 6y agoyou mean like how TSMC is building a fab in arizona and samsung in texas?
- pradn 6y agoBut TSMC's Arizona plant will make 5nm chips in 2023, by which time 5nm wont be the leading-edge node - 3nm will be. It's nice to see some geodiversity however. In any case, TSMC is dependent on ASML, which has a monopoly on leading-edge EUV tech. There is a decent amount of competition at older nodes, like > 40nm. So we'll still be able to make some chips if TSMC completely goes out of business, but obviously it wont scale to the demand and will seriously hamper business, science, and government.
- dnautics 6y agoI'm comparing against GP's suggestion "to build a fab". Point is, SMC and TSMC fabs will be online faster than a direct fab investment. > science I believe science has access to more compute than it needs. I could be wrong now, but last I checked, a few years ago, the huge computational clusters (both public and private, e.g. @ pharma companies) were under-utilized, especially on legacy-hardware-that-is-still-pretty-damn-good, and scrambling to find ways to engage with outside clients to fill out capacity.
- raarts 6y agoAs I read elsewhere (don't have the link) this is supposed to be the #2 chip supplier for the automotive industry, and the #1 and #3 closed down because of the Texas Power outage and are still not operational. Anyone know more?
- Kliment 6y agoYou read it here: https://asia.nikkei.com/Business/Tech/Semiconductors/Chip-starved-automakers-shudder-at-Renesas-plant-s-1-month-halt https://asia.nikkei.com/Business/Tech/Semiconductors/Chip-st... Some more details on the NXP texas fuckup: https://outline.com/rfBWzn https://outline.com/rfBWzn
- tlb 6y ago> because the facilities were completely shut down, clean rooms were flooded with particles and every piece of equipment was contaminated Ouch. That suggests that they didn't have backup power for the positive pressure ventilation system. I hope adding that is on someone's todo list for next time.
- deleted 6y ago[deleted]
- meepmorp 6y agoEven if they had backup power for those kinds of systems, the cold in Texas took down utility-grade generation capacity. It wouldn't be a surprise if they had their backups die, too.
- mzs 6y agoI believe this is the same fire reported on two or three days ago. Here are some photos: https://www.autoforum.cz/predstaveni/zly-sen-automobilek-hned-tak-neskonci-nadeji-na-lepsi-casy-pohrbil-mohutny-pozar/ https://www.autoforum.cz/predstaveni/zly-sen-automobilek-hne...
- unwind 6y agoAs someone who has had to endure over a year of very close to the metal (in this case, imagine centuries old, gnarly, rusty random pot metal, maybe) development on a Renesas platform, I'm tempted to think "fewer Renesas products? Awesome!!" but obviously that would be childish. I'm sorry for all the people hurt by this, fire is no joke. Edit: added missing words.
- fra 6y agoI’m with you. Renesas SuperH needs to go.
- kmeisthax 6y agoWhat, you don't like having arithmetic and logical left shifts? I thought orthogonality was a good idea :P
- exmadscientist 6y agoThat is indeed a childish sentiment. And yet I completely agree with you. Probably because I've also experienced their products and their... unique... design-in challenges. My deepest sympathies to all the people impacted by this. My [extremely impolite words redacted] to the company.
- jmiskovic 6y agoI used Renesas with GHS debugger. It required _constant_ access to license server. If I used VPN to access another virtual machine the IDE would throw dialog on top of other windows with a countdown. Using GDB CLI after that felt like living in the future!
- deleted 6y ago[deleted]
- dgrin91 6y agoI'm not super familiar with this space and am a bit confused - why is this big on automakers and not other chip consumers? Also 300mm seems kind of big for chips? What am I missing?
- mzs 6y agoBecause that's where they make the 300mm wafers they use for their engine MCUs: https://www.renesas.com/us/en/products/microcontrollers-microprocessors/other-mcus-mpus/superh-risc-engine-family-mcus https://www.renesas.com/us/en/products/microcontrollers-micr...
- _fizz_buzz_ 6y ago300 mm is the wafer size. The wafers then get cut into chips. The whole production line has to be made so that it can process the wafer size. For a long time 200 mm wafers was the industry standard. That this is a 300 mm wafer fab implies that it is a high volume, fairly new fab that burned down.