9 ms·
Why Do We Call These “DuPont” Connectors?
- phildenhoff 6y agoThe site seems to be fried, but a Wayback Machine archive is available: https://web.archive.org/web/20210322182029/http://www.mattmillman.com/why-do-we-call-these-dupont-connectors/ https://web.archive.org/web/20210322182029/http://www.mattmi...
- deleted 6y ago[deleted]
- nomdep 6y ago> The answer to this question unfortunately lives *a long time in the past*, perhaps 30 years ago TIL that the dawn of time was 30 years ago
- deleted 6y ago[deleted]
- pram 6y agoClose, but the dawn of time is actually 50 years ago! (Jan 1 1970)
- laurent92 6y agoIt always amazes me that NASA engineers had to program the landing on the moon with negative timestamps. And not a single bug for the -0 / +0 year.
- londons_explore 6y agoAre you sure they used Unix time?
- geocrasher 6y agoTL;DR: Berg made connectors like these. Berg was bought by DuPont who put their branding on things. Around this time in the early 90's, clones started showing up and enthusiasts assigned the "DuPont" to apparently differentiate between these new clones and the previous, officially made, "Berg" connectors.
- fireattack 6y agoAppreciated. It is probably just me, but I find the article itself (which I read in full) relatively hard to follow. So is the other related article [1]. I think it's because the author was trying to fit all the nuances in, which is a problem I suffer from myself when I write. [1] https://web.archive.org/web/20210209100324/http://www.mattmillman.com/info/crimpconnectors/dupont-and-dupont-connectors/ https://web.archive.org/web/20210209100324/http://www.mattmi...
- geocrasher 6y agoNo worries. I too found the article a little bit on the hard to read side. I can't say why specifically, but there seemed to be a lot of details that didn't really add to the story. Perhaps that's the "nuance" you were referring to.
- kens 6y agoMy recollection is that these were called Molex connectors in the 1980s. Are DuPont connectors different in some way, or were the names used somewhat interchangeably?
- martijnvds 6y agoI've only heard "Molex" used for the connectors for power on (pre SATA) hard disks.
- jeffbee 6y agoThere is a certain subculture where "a molex connector" is the pre-SATA computer disk power connector, but Molex makes a million connectors and the Molex catalog is an inch thick so it never made much sense to me. Another reason it doesn't make sense is that Amphenol and others make compatible 2-piece connectors. If you want to sound like an informed person, don't use "molex connector" that way.
- olyjohn 6y agoI don't think it makes you sound uninformed... Most places you go into for PC components will know exactly what a "molex connector" is in relation to PC hardware. When building a PC, knowledge of Molex brand connectors isn't all that relevant. It's like asking for a Kleenex instead of a tissue. Or back in the day, when you needed to make a copy of something, using the Xerox machine was quite a common term, even though Xerox made more than one machine, and most machines probably weren't made by Xerox.
- serf 6y ago>It's like asking for a Kleenex instead of a tissue. that'd be the case if Kleenex made hundreds of variations, and the variations had no cross-compatibility with one another. People that want a 'molex connector' want, usually, an AMP style press-lock 4 pin connector... unless they don't -- they're looking for a molex MiniFit extension to reach their GPU... unless they don't -- they want a vintage Molex asymmetric 4 pin for an old legacy device. 'Molex' is more ambiguous, imo, than you give it credit for.
- layoutIfNeeded 6y agoUgh, I absolutely hate these. They're always super hard to separate due to the slippery plastic they're made of.
- terramex 6y agoThey are both super hard to separate and yet they separate on their own when not observed.
- aidenn0 6y agoThe square-knot of the connector world!
- bschwindHN 6y agoThey're also quite unreliable compared to solid core wire. I've had a few confusing debugging sessions where one of these wires ended up being the reason the circuit didn't work - either no connection or a sporadic one.
- aidenn0 6y agoAren't all connectors unreliable compared to solid core wire? I mean one has moving parts and the other does not.
- bschwindHN 6y agoYep, and that's pretty much my point. People often use these connectors for breadboarding circuits. So many different vendors sell "DuPont" connectors of varying qualities. To save myself from any trouble with these connectors, I simply don't use them and opt for 22 gauge solid core wire directly. Ben Eater has a good video on the way he creates breadboard circuits, though his organization is a bit extreme for when you're prototyping. But in either case, you can use solid core wire directly and save yourself a lot of trouble. https://www.youtube.com/watch?v=PE-_rJqvDhQ https://www.youtube.com/watch?v=PE-_rJqvDhQ
- sigstoat 6y agothese are a PITA to crimp. :(
- amelius 6y agoCould be the tool. How many pliers have you tried so far?
- sigstoat 6y agozero.
- amelius 6y agoYou can buy cheap crimping pliers on banggood, but check the reviews first (e.g. youtube).
- sigstoat 6y agohmm, i thought you were implying that i was using pliers to crimp them, instead of actual crimpers. (which would've made you a jerk, which is why i didn't elaborate much further.) instead it looks like you call them "crimping pliers" instead of "crimpers" (or perhaps "crimping tool") like most american english speakers. fair enough. looking very quickly at some youtube videos, i appear to have something similar to the cheap ratcheting chinese crimpers, not the (apparently) popular and non-ratcheting japanese crimpers. i'll pick up the different tool and see how it goes. ...i've still got hundreds yet to go, so it'll have plenty of time to pay for itself.
- bonzini 6y agoThose crimping tools are usually good enough for male pins, but they make a mess out of female pins. They just don't come out square enough.
- sschueller 6y agoYou have to be careful not to damage the square part when crimping. Some have a little tab that give a guide how far you can push it in to the tool without damaging it.
- interestica 6y agoInterestingly enough, 'du pont' would basically translate to "from the bridge". And these do connect (bridge) two sources. Sometimes history works backwards?
- deleted 6y ago[deleted]
- tachyonbeam 6y agoDupont is also simply a French last name. https://en.wikipedia.org/wiki/Dupont_(surname)#:~:text=Dupont%2C%20variously%20styled%20as%20DuPont,26th%20most%20popular%20in%20France https://en.wikipedia.org/wiki/Dupont_(surname)#:~:text=Dupon....
- amelius 6y agoDuPont is a chemical company. https://en.wikipedia.org/wiki/DuPont https://en.wikipedia.org/wiki/DuPont
- interestica 6y agoThey re-split out the chemical part to Dow.
- glandium 6y agoThe company name comes from the family name (Dupont de Nemours).
- oakwhiz 6y agoI've never heard anybody call them "DuPont" connectors outside of Chinese e-commerce and electronics websites. (e.g. "dupont line") Usually I've heard them referred to as 0.1" headers or header pins instead.
- jrockway 6y agoI've always heard them called DuPont connectors. Might be a hobbyist vs. professional thing; I use them in hobby projects, so am probably exposed to the questionable vendors more than a professional would be. I was looking for crimping tools relatively recently and was surprised to find that reputable vendors don't call them DuPont connectors, even in passing. As far as I can tell, they have no name that everyone would recognize and that lets manufacturers steer clear of naming other companies, despite being so ubiquitous. (I suppose this is a common problem with connectors. Someone could tell me "it's a Molex connector", and I'd know what they mean -- the one that supplies power to pre-SATA hard drives -- but of course Molex makes thousands of different connectors, so it's really a terrible name for that one specifically.)
- xnyan 6y agoAs someone who came into electronics in a pretty indirect manner (started designing software for electronics testing, hard to be good at it without at least a decent understanding of how it works), connecter names/terminology/nomenclature proved to be one of the most annoying parts. I ended up doing a lot of reverse engineering to understand how things worked, and I hope that when a prospective EE is going through their ABET accredited program that they have some class that breaks it all down for them, but I had no such luck so just sort of brute forced my way into learning all connector types I encountered. For anyone who wants to know - turns out, there a surprisingly limited number of types of connectors that are commonly used in most electronics today. You can go to any decent electronics supply outfit (mouser, digikey and many others) and in the space of a few hours familiarize yourself with most of what you need to know just by clicking through the connectors category and sorting by number of parts in stock.
- 6y ago
- anonymousiam 6y agoI still call them Berg connectors, but I am an old fart.
- amelius 6y agoSomewhat related question: what is your favorite way to mount PCBs vertically and connect them? IDC ribbon cable seems popular, but there should be a simpler way? Simple pin headers are somewhat ok, but proper alignment is sometimes difficult (getting pin 1 into socket 1, and not pin 2 into socket 1). Edit: I mean vertical mounting (stacking), so the boards are not under an angle.
- varjag 6y agoThere's a multitude of indexed connectors on the market. Repurposing DDR memory connectors is rather popular.
- tyingq 6y agoFor low-density, old school edge connectors with a key cut are nice. That way, the connector is part of the board itself. Sometimes called "Sullins" connectors.
- amelius 6y agoYes, but in my case it makes more sense to stack in the direction of the motherboard, rather than perpendicular to it.
- auxym 6y agoI have some experience with interfacing with AMC PCB-mount boards in this fashion: https://www.a-m-c.com/products/?_form_factor=pcb-mount https://www.a-m-c.com/products/?_form_factor=pcb-mount I don't hate the style of pin headers they're using. Probably considered laughably low density by modern standards, but for industrial stuff they're robust. Never had issue with alignment, but they are not keyed, so it could happen I guess. For modern, high-speed, high-density you could look into Samtec board-to-board offerings: https://www.samtec.com/connectors/high-speed-board-to-board https://www.samtec.com/connectors/high-speed-board-to-board though the big names (Molex, TE, etc) probably have equivalent stuff.
- smilekzs 6y ago
- Kirr 6y agoBerg Electronics was founded in 1950. It blows my mind that we still use this connector after 70 years. https://www.connectortips.com/breakthrough-contact-design-spawned-500m-connector-company/ https://www.connectortips.com/breakthrough-contact-design-sp...
- techrat 6y agoDefinitely a case of "If it ain't broke, don't fix it." The pin works well for motherboard headers in several ways. It's compact, robust and straightforward. Even if someone doesn't get the orientation right of, say, a 2x5 USB Header Block, they still understand that like size means like size and you push the black part down on the shiny golden pins.
- jareklupinski 6y agoI have always called these "rectangular headers" but I still refer to their surface-mount counterparts as JST connectors :X