3 ms·
The endstop can be designed with springyness. Then the process is "move towards the endstop", then "switch off the motor current, if we are pushing against the
by londons_explore 6y ago
The endstop can be designed with springyness.
Then the process is "move towards the endstop", then "switch off the motor current, if we are pushing against the endstop spring, then we'll be pushed back a step". Repeat this process 40 times.
- amelius 6y agoNice idea. I guess you can also measure from the coil current that the motor is being stopped or pushed back.
- dekhn 6y agoYup, and some modern steppers have this: https://github.com/bdring/Grbl_Esp32/wiki/StallGuard-Setup-and-Tuning https://github.com/bdring/Grbl_Esp32/wiki/StallGuard-Setup-a...