10 ms·

Pine64 Unveils Quartz64 SBC

164 points by stambros 6y ago

api 6y ago
There's quite a few third party boards that are far better than the Raspberry Pi 4. I found the Rpi4 quite disappointing, especially the half-supported GPU and the lack of AES/crypto extensions in the ARM64 chip. Only ARM64 chip I've ever seen that lacks those.
- PragmaticPulp 6y ago
  The target market for the Raspberry Pi foundation is education. They get cheap boards into the hands of people everywhere and provide plenty of documentation to get them started. Raspberry Pi has the biggest community, and therefore it’s the best choice for anyone looking to get started. If you’re the type of person who needs very specific features like AES acceleration, then you don’t want to invest in a board aimed at education markets anyway. The Raspberry Pi 4 is actually very performant due to the Cortex-A72 cores, which are not common on other SBCs at low price points. It’s actually an incredible performance value in the space, even if it doesn’t fit everyone’s exact situational requirements.
  - Funes- 6y ago
    In my opinion, Raspberry Pi's main problem has to do with using SD cards, which are prone to errors and corruption. It's a kind of media storage that works best if it operates more statically--for instance, you read some photos on your camera, remove a few, take some new ones... and that's it for the day. They are not intended to undergo a large number of read/write cycles on a regular basis, and that's what the Raspberry Pi makes them do, using them to run its OS.
    - Mediterraneo10 6y ago
      The problem of reliance on an SD card is somewhat less nowadays with the Raspberry Pi 4. Its faster USB3 support allows you to just use the SD card for the /boot partition to boot the system, while you can maintain everything else (root, userspace) on an attached USB drive that can handle heavy reading and writing.
      - chabes 6y ago
        You can boot entirely from USB on the Pi 4s now. Don’t even need the microSD for the boot partition.
        fn1 6y ago
        Booting from USB was possible for the RPI3 as well.
    - chabes 6y ago
      Pi 4s can boot from USB now, as of the Sept 2020 bootloader update. No need for microSD.
      - Funes- 6y ago
        No, not only Raspberry Pi 4's. I've had this on my bookmarks for a while, which explains how to boot any Pi (some models differ with regards to the procedure, or the need of an SD card, such as the Raspberry Pi Zero, which still needs one): https://www.raspberrypi.org/documentation/hardware/raspberrypi/bootmodes/msd.md https://www.raspberrypi.org/documentation/hardware/raspberry...
      - deleted 6y ago
        [deleted]
    - stambros 6y ago
      Lost 2 SD cards that way. It's a relic that should be phased out in favor of NVME or SATA.
      - CameronNemo 6y ago
        What SD cards did you use? I have seen high endurance ones available.
        tpmx 6y ago
        These have never failed me: https://www.digikey.com/en/product-highlight/a/atp/advancedmlc-amlc-microsd-microsdhc-cards https://www.digikey.com/en/product-highlight/a/atp/advancedm... I even set up a testing rig to do randomized power shut down thousands of times; they didn't fail: https://forums.balena.io/t/raspberry-pi-atp-amlc-microsd-cards-automated-powercycling-tests/4756 https://forums.balena.io/t/raspberry-pi-atp-amlc-microsd-car... Found these via this 2018 HN comment: https://news.ycombinator.com/item?id=16777238 https://news.ycombinator.com/item?id=16777238
    - fl0under 6y ago
      You can use log2ram [0] to reduce the number of writes to the SD card. That's what I'm doing at the moment and haven't had any problems with my SD card, though it has been in use for less than 6 months so far. I agree though that a SD card is not the best storage option for the OS and would like to move mine over to an nvme drive. [0] https://github.com/azlux/log2ram https://github.com/azlux/log2ram
    - bityard 6y ago
      I read this same comment in every single HN post even tangentially related to the Pi. As others have pointed out, the Pi can run just fine off of USB and the newer ones support it out of the box. I ran my version 1 256MB Raspberry Pi for off an external USB drive. I only had to _boot_ from the SD card. There have also been, for a long time now, SD cards with much better durability than the cheapest ones you can buy on Amazon. I personally look for ones labeled "high-endurance" or for use with dashcams because those are much closer to a proper SSD in terms of wear cycles. I wish the RPi foundation would make it clearer in their documentation and blog posts you're going to have a bad time if you use a generic SD card as if it was a general-purpose hard drive.
      - ClumsyPilot 6y ago
        The problem is that getting a good sd card or flash drive is still a roll of the dice - you can't tell if a given device will suit by looking at its specs. eMMCs are made pesirically for this purpose and its a shame there is bo pi model using them
      - Funes- 6y ago
        >As others have pointed out, the Pi can run just fine off of USB and the newer ones support it out of the box. I'm fully aware of that. In fact, and ironically enough, I'm one of those people you are referring to: https://news.ycombinator.com/item?id=26157437 https://news.ycombinator.com/item?id=26157437 >I wish the RPi foundation would make it clearer in their documentation and blog posts you're going to have a bad time if you use a generic SD card as if it was a general-purpose hard drive. Conversely, I wish they would tell all their approved sellers not to include those "generic" SD cards (Raspbian/RPi OS preinstalled and all) with Pi's.
  - tpmx 6y ago
    > The target market for the Raspberry Pi foundation is education. I'd bet 80% of the sales are to hobbyists/companies. It's a weird setup. Have a look at this page: https://www.raspberrypi.org/about/meet-the-team/ https://www.raspberrypi.org/about/meet-the-team/ There are two groups of people: * Raspberry Pi Foundation (100+) * Raspberry Pi Trading (27) My understanding: The people in "Raspberry Pi Trading" do the hardware/software/documentation/product management/sales work, plus publish the monthly MagPi magazine. That's remarkably few people for this, btw. The profit of this operation goes to support the foundation, per the wikipedia page. There sure seems to be a lot of fluff there. I think it would be wise to change that balance (100+ vs 27 full times) a little bit more in advantage of Raspberry Pi Trading part.
    - worik 6y ago
      An interesting thing about that "meet the teem" page is the diversity. Most Linuxish projects are a pale sausage fest!
      - tpmx 6y ago
        I guess that's why they put the Raspberry Pi Foundation people first, then.
    - PragmaticPulp 6y ago
      > I'd bet 80% of the sales are to hobbyists/companies. Hobbyists are part of the educational target. Raspberry Pi has introduced more people to embedded Linux than any other project. We didn’t always live in an era of cheap SBCs. Before Raspberry Pi, the barriers to entry were much higher and much more expensive. As much as people like to criticize the Pi for not having every possible feature or not being completely open source at every level, it doesn’t actually matter for 99% of projects. It gets the job done cheaply, quickly, and with a huge support community behind it. The Raspberry Pi CM4 is now available for anyone who needs more granular access to IO or extra features like eMMC.
      - tpmx 6y ago
        It seems like you didn't reply to I wrote, but rather to what you imagined I could have written. Or you're just pontificating in general.
  - kevin_thibedeau 6y ago
    Cortex-M4s have an optional AES core and hardware RNG. Pretty sad for a higher grade chip to be missing that. It doesn't consume much die space.
- cdumler 6y ago
  The issue has never been that the Raspberry PI hardware is amazing or fully utilized. The issue is that is that what is supported is supported well in software. You can put Raspian on it and expect consistent behavior in software, drivers, video, audio, etc. It will all just work in typical ways.
  - deleted 6y ago
    [deleted]
- ilikeorangutans 6y ago
  What boards would you consider "better" and for what reasons (gpu and crypto extensions, or are there other factors)? I run a few raspberry pis and always looking for new/better toys.
  - CameronNemo 6y ago
    I like rk3399 boards, unless you need deep suspend or video out through the USB type c port.
    - rcoder 6y ago
      RK3399s make great bang-for-the-buck boards, but the idle power consumption is pretty high. I’ve been kicking around one of the Khadas VIM3s which has a newer Amlogic SoC on it and like what I’ve seen so far. It’s a significantly more expensive board, though There are plenty of things that an RK3399 (or the new Rockchip being used in the OP) can handle just fine. I was definitely interested to see that this new chip supports up to 8GB of RAM. I think there are a lot of interesting applications for RAM-rich, Gig-E bearing nodes that can run off a battery. (Examples: Redis at the edge, “Field” PostgreSQL replicated to the cloud when possible, nested VMs protecting trusted “firmware” from remotely-loaded containers and machine images, etc.)
    - eqvinox 6y ago
      The only thing really atrocious on the RK3399 is the internal bus matrix. It's a legacy 32-bit crossconnect, i.e. physical address space is only 4GB. Among other things, this means the PCIe aperture is squeezed down to a very measly 2×16MB — which is not even remotely enough for a lot of PCIe cards. Also, if you install 4GB RAM, you only get to use something like 3.5G. Oh and if I remember correctly, PCI MSI are broken, which again limits the PCIe card selection even more...
      - CameronNemo 6y ago
        Where can I find more information related to these issues?
- asabjorn 6y ago
  What is your favorite alternative?
- StillBored 6y ago
  While this board has a nice selection of features, its likely the pi4 is faster in any number of workloads due to the use of the A72s. A55's are still in the small/energy efficient category (the article notes they are slower than the existing rk3399). Which is fine if your doing traditional micro-controller functions. But the problem with these boards is they end up being application specific rather than general purpose boards. For example they have hardware video decoders/etc but as soon as the user tries to decode something that doesn't have hardware support it falls back to the CPU, and turns into a slideshow. Now if this were the rx3588 with the A76s it would be a different story.
  - ac29 6y ago
    A quad-A55 is a surprisingly performant board - not a desktop replacement, but certainly more than a fancy microcontroller. Keep in mind this SoC is also clocked 20% faster than the RPi4. Not enough to make it faster overall, but enough to substantially close the gap.
    - StillBored 6y ago
      There is a newer SoC revision on the newer rpi's. For example the rpi400 comes at 1.8Ghz base. Even so, it seems the 1.5Ghz is more about running the system without a heatsink. Give one a heatsink and they run at over 2Ghz. The perf bump from 1.5 to 2.2Ghz is not insignificant. https://www.jeffgeerling.com/blog/2020/raspberry-pi-400-can-be-overclocked-22-ghz https://www.jeffgeerling.com/blog/2020/raspberry-pi-400-can-... https://hothardware.com/reviews/hot-clocked-pi-raspberry-pi-4-benchmarked-at-214-ghz https://hothardware.com/reviews/hot-clocked-pi-raspberry-pi-... Also: Arm itself says the A55 is ~18% faster than the a53. So, its still quite slow.
- heavyset_go 6y ago
  I'm unaware of ARM SBCs that have as much support from their vendors as the Raspberry Pi models do, though.
  - ac29 6y ago
    Pine64 is a probably a pretty close second. For example, many of their boards are supported by upstream Debian [0], which isnt true for the RasPi devices. [0] https://d-i.debian.org/daily-images/arm64/daily/netboot/SD-card-images/ https://d-i.debian.org/daily-images/arm64/daily/netboot/SD-c...
- scoopertrooper 6y ago
  If you like poorly documented/supported hardware, try taking a stroll outside of the Raspberry PI ecosystem. I bought myself a rk3399 based compute module a while ago, the support was... sparse. * The small amount of documentation that does exist is vague and incomplete. Many of the links were actually broken, so I had to fall back to using the docs for older models. * The key expired on their apt repo and they never bothered to renew it. * The selection of prebuilt Linux distributions is small and several generations behind. * The community is small, so you can’t rely on things like stackoverflow as much as you might in PI land. Overall, I had a good time with it, but getting started on a PI would have been so much easier.
ed25519FUUU 6y ago
How does the onboard battery charging IC work? Can I hook up a 3s li-ion battery and charge it via the 12v power input? Does the battery kick on if the main PSU is interrupted?
- qchris 6y ago
  I think that this could be an underlooked, but absolutely killer feature for this board. Built-in support for high-capacity li-ion batteries that automatically kick-in for a battery backup would be awesome for homemade NAS set-ups, not to mention a whole host of robotics-y or home automation projects.
  - amelius 6y ago
    Yeah, but you'll have to power your modem too.
    - JustSomeNobody 6y ago
      These work really well for that task. Can power a cable modem and a small edgerouter-x using a y-cable. https://www.ebay.com/itm/Belkin-Residential-Gateway-Battery-Backup-REV-B-w-Battery-BU3DC001-12V/274684107792?epid=1600149188&hash=item3ff472dc10:g:fqAAAOSwuuFgFJzX https://www.ebay.com/itm/Belkin-Residential-Gateway-Battery-...
  - ac29 6y ago
    I dont see how a battery attached to the board would do much good for powering your drives in a NAS situation - they'd still need their own UPS.
  - eqvinox 6y ago
    A killer feature that can be replaced by a 6€ external module? https://www.ebay.com/itm/402641596500 https://www.ebay.com/itm/402641596500 (you can get crappier ones for 2€... this one has a charge controller [MCP73833] from a recognizable brand [Microchip] with datasheets available)
- 6y ago
Funes- 6y ago
Coupled with that 10-inch e-ink panel that they mention will be available when it launches, this could make for a great machine for working (reading, writing, coding...). I hope the price is not very steep.
- ed25519FUUU 6y ago
  I worry more about the price of a 10 inch e-ink panel.
  - Funes- 6y ago
    I was referring to the sum of both--to the price of that particular machine (SBC + e-ink panel) I just described.
  - megous 6y ago
    Yeah, those can easily be in the $200 range.
  - FlyingSnake 6y ago
    Cost of Pine64 SBC: $64 Cost of e-Ink panel: $50 Money paid to patent owner: $300
  - captainmuon 6y ago
    Don't worry about the price - when the e-ink patent overlords learn that they are not being used for blessed purposes (digital signage or ebook readers) but as general purpose display sold to end users (gasp!) they'll probably become mysteriously unavailable. (Source: our company tried to buy e-ink displays to integrate into a product. All I can say is, it is difficult...)
    - CameronNemo 6y ago
      Kobo's Clara HD is 99$, runs post market OS, has a small 1GHz core and 512 MB of RAM. Great low end option IMO.
      - 6y ago
1-6 6y ago
This is the real star of CES (just kidding). Where can I put my preorder?
rbanffy 6y ago
With 8 GB it becomes a viable small desktop box.
- CameronNemo 6y ago
  I tried the rk3328 on my 1080p monitor. Was fairly slow, and video playback was problematic. Otherwise good enough for light usage. Hopefully the Rockchip VPU patches are still making progress.
- PragmaticPulp 6y ago
  With all of the connectors and interfaces, this is more of a dev board. The article notes that CPU performance is similar to the Raspberry Pi 4, which is already available with 8GB of RAM and has better mainstream support.
  - ggm 6y ago
    Lacks the PCI. If you get the compute boards, you can get it, and then use a carrier board to do things e.g. quad-Sata disk stuff. I'm using the Pi4 with the 4 port SATA card through USB, and its just-about ok. I'm happy, but I'd love to try direct PCI access
- pjmlp 6y ago
  Slackware 2.0 ran on 16 MB, with X.
  - rbanffy 6y ago
    If you can fan out enough RS-232 ports out of the USB's, you can probably run an 80's corporation with terminals for everyone out of one such board.
martin__ 6y ago
I've been meaning to buy something from pine64. This might finally be it; especially with that e-ink screen. I just joined the mailing list. Hopefully I can snag one of those.
- linsomniac 6y ago
  One word: Pinecil
holri 6y ago
Will this run on a mainline kernel?
- CameronNemo 6y ago
  Not yet. Hopefully eventually.

164 points by stambros 6y ago

api 6y ago

There's quite a few third party boards that are far better than the Raspberry Pi 4. I found the Rpi4 quite disappointing, especially the half-supported GPU and the lack of AES/crypto extensions in the ARM64 chip. Only ARM64 chip I've ever seen that lacks those.

PragmaticPulp 6y ago
The target market for the Raspberry Pi foundation is education. They get cheap boards into the hands of people everywhere and provide plenty of documentation to get them started. Raspberry Pi has the biggest community, and therefore it’s the best choice for anyone looking to get started. If you’re the type of person who needs very specific features like AES acceleration, then you don’t want to invest in a board aimed at education markets anyway. The Raspberry Pi 4 is actually very performant due to the Cortex-A72 cores, which are not common on other SBCs at low price points. It’s actually an incredible performance value in the space, even if it doesn’t fit everyone’s exact situational requirements.
- Funes- 6y ago
  In my opinion, Raspberry Pi's main problem has to do with using SD cards, which are prone to errors and corruption. It's a kind of media storage that works best if it operates more statically--for instance, you read some photos on your camera, remove a few, take some new ones... and that's it for the day. They are not intended to undergo a large number of read/write cycles on a regular basis, and that's what the Raspberry Pi makes them do, using them to run its OS.
  - Mediterraneo10 6y ago
    The problem of reliance on an SD card is somewhat less nowadays with the Raspberry Pi 4. Its faster USB3 support allows you to just use the SD card for the /boot partition to boot the system, while you can maintain everything else (root, userspace) on an attached USB drive that can handle heavy reading and writing.
    - chabes 6y ago
      You can boot entirely from USB on the Pi 4s now. Don’t even need the microSD for the boot partition.
      - fn1 6y ago
        Booting from USB was possible for the RPI3 as well.
  - chabes 6y ago
    Pi 4s can boot from USB now, as of the Sept 2020 bootloader update. No need for microSD.
    - Funes- 6y ago
      No, not only Raspberry Pi 4's. I've had this on my bookmarks for a while, which explains how to boot any Pi (some models differ with regards to the procedure, or the need of an SD card, such as the Raspberry Pi Zero, which still needs one): https://www.raspberrypi.org/documentation/hardware/raspberrypi/bootmodes/msd.md https://www.raspberrypi.org/documentation/hardware/raspberry...
    - deleted 6y ago
      [deleted]
  - stambros 6y ago
    Lost 2 SD cards that way. It's a relic that should be phased out in favor of NVME or SATA.
    - CameronNemo 6y ago
      What SD cards did you use? I have seen high endurance ones available.
      - tpmx 6y ago
        These have never failed me: https://www.digikey.com/en/product-highlight/a/atp/advancedmlc-amlc-microsd-microsdhc-cards https://www.digikey.com/en/product-highlight/a/atp/advancedm... I even set up a testing rig to do randomized power shut down thousands of times; they didn't fail: https://forums.balena.io/t/raspberry-pi-atp-amlc-microsd-cards-automated-powercycling-tests/4756 https://forums.balena.io/t/raspberry-pi-atp-amlc-microsd-car... Found these via this 2018 HN comment: https://news.ycombinator.com/item?id=16777238 https://news.ycombinator.com/item?id=16777238
  - fl0under 6y ago
    You can use log2ram [0] to reduce the number of writes to the SD card. That's what I'm doing at the moment and haven't had any problems with my SD card, though it has been in use for less than 6 months so far. I agree though that a SD card is not the best storage option for the OS and would like to move mine over to an nvme drive. [0] https://github.com/azlux/log2ram https://github.com/azlux/log2ram
  - bityard 6y ago
    I read this same comment in every single HN post even tangentially related to the Pi. As others have pointed out, the Pi can run just fine off of USB and the newer ones support it out of the box. I ran my version 1 256MB Raspberry Pi for off an external USB drive. I only had to _boot_ from the SD card. There have also been, for a long time now, SD cards with much better durability than the cheapest ones you can buy on Amazon. I personally look for ones labeled "high-endurance" or for use with dashcams because those are much closer to a proper SSD in terms of wear cycles. I wish the RPi foundation would make it clearer in their documentation and blog posts you're going to have a bad time if you use a generic SD card as if it was a general-purpose hard drive.
    - ClumsyPilot 6y ago
      The problem is that getting a good sd card or flash drive is still a roll of the dice - you can't tell if a given device will suit by looking at its specs. eMMCs are made pesirically for this purpose and its a shame there is bo pi model using them
    - Funes- 6y ago
      >As others have pointed out, the Pi can run just fine off of USB and the newer ones support it out of the box. I'm fully aware of that. In fact, and ironically enough, I'm one of those people you are referring to: https://news.ycombinator.com/item?id=26157437 https://news.ycombinator.com/item?id=26157437 >I wish the RPi foundation would make it clearer in their documentation and blog posts you're going to have a bad time if you use a generic SD card as if it was a general-purpose hard drive. Conversely, I wish they would tell all their approved sellers not to include those "generic" SD cards (Raspbian/RPi OS preinstalled and all) with Pi's.
- tpmx 6y ago
  > The target market for the Raspberry Pi foundation is education. I'd bet 80% of the sales are to hobbyists/companies. It's a weird setup. Have a look at this page: https://www.raspberrypi.org/about/meet-the-team/ https://www.raspberrypi.org/about/meet-the-team/ There are two groups of people: * Raspberry Pi Foundation (100+) * Raspberry Pi Trading (27) My understanding: The people in "Raspberry Pi Trading" do the hardware/software/documentation/product management/sales work, plus publish the monthly MagPi magazine. That's remarkably few people for this, btw. The profit of this operation goes to support the foundation, per the wikipedia page. There sure seems to be a lot of fluff there. I think it would be wise to change that balance (100+ vs 27 full times) a little bit more in advantage of Raspberry Pi Trading part.
  - worik 6y ago
    An interesting thing about that "meet the teem" page is the diversity. Most Linuxish projects are a pale sausage fest!
    - tpmx 6y ago
      I guess that's why they put the Raspberry Pi Foundation people first, then.
  - PragmaticPulp 6y ago
    > I'd bet 80% of the sales are to hobbyists/companies. Hobbyists are part of the educational target. Raspberry Pi has introduced more people to embedded Linux than any other project. We didn’t always live in an era of cheap SBCs. Before Raspberry Pi, the barriers to entry were much higher and much more expensive. As much as people like to criticize the Pi for not having every possible feature or not being completely open source at every level, it doesn’t actually matter for 99% of projects. It gets the job done cheaply, quickly, and with a huge support community behind it. The Raspberry Pi CM4 is now available for anyone who needs more granular access to IO or extra features like eMMC.
    - tpmx 6y ago
      It seems like you didn't reply to I wrote, but rather to what you imagined I could have written. Or you're just pontificating in general.
- kevin_thibedeau 6y ago
  Cortex-M4s have an optional AES core and hardware RNG. Pretty sad for a higher grade chip to be missing that. It doesn't consume much die space.
cdumler 6y ago
The issue has never been that the Raspberry PI hardware is amazing or fully utilized. The issue is that is that what is supported is supported well in software. You can put Raspian on it and expect consistent behavior in software, drivers, video, audio, etc. It will all just work in typical ways.
- deleted 6y ago
  [deleted]
ilikeorangutans 6y ago
What boards would you consider "better" and for what reasons (gpu and crypto extensions, or are there other factors)? I run a few raspberry pis and always looking for new/better toys.
- CameronNemo 6y ago
  I like rk3399 boards, unless you need deep suspend or video out through the USB type c port.
  - rcoder 6y ago
    RK3399s make great bang-for-the-buck boards, but the idle power consumption is pretty high. I’ve been kicking around one of the Khadas VIM3s which has a newer Amlogic SoC on it and like what I’ve seen so far. It’s a significantly more expensive board, though There are plenty of things that an RK3399 (or the new Rockchip being used in the OP) can handle just fine. I was definitely interested to see that this new chip supports up to 8GB of RAM. I think there are a lot of interesting applications for RAM-rich, Gig-E bearing nodes that can run off a battery. (Examples: Redis at the edge, “Field” PostgreSQL replicated to the cloud when possible, nested VMs protecting trusted “firmware” from remotely-loaded containers and machine images, etc.)
  - eqvinox 6y ago
    The only thing really atrocious on the RK3399 is the internal bus matrix. It's a legacy 32-bit crossconnect, i.e. physical address space is only 4GB. Among other things, this means the PCIe aperture is squeezed down to a very measly 2×16MB — which is not even remotely enough for a lot of PCIe cards. Also, if you install 4GB RAM, you only get to use something like 3.5G. Oh and if I remember correctly, PCI MSI are broken, which again limits the PCIe card selection even more...
    - CameronNemo 6y ago
      Where can I find more information related to these issues?
asabjorn 6y ago
What is your favorite alternative?
StillBored 6y ago
While this board has a nice selection of features, its likely the pi4 is faster in any number of workloads due to the use of the A72s. A55's are still in the small/energy efficient category (the article notes they are slower than the existing rk3399). Which is fine if your doing traditional micro-controller functions. But the problem with these boards is they end up being application specific rather than general purpose boards. For example they have hardware video decoders/etc but as soon as the user tries to decode something that doesn't have hardware support it falls back to the CPU, and turns into a slideshow. Now if this were the rx3588 with the A76s it would be a different story.
- ac29 6y ago
  A quad-A55 is a surprisingly performant board - not a desktop replacement, but certainly more than a fancy microcontroller. Keep in mind this SoC is also clocked 20% faster than the RPi4. Not enough to make it faster overall, but enough to substantially close the gap.
  - StillBored 6y ago
    There is a newer SoC revision on the newer rpi's. For example the rpi400 comes at 1.8Ghz base. Even so, it seems the 1.5Ghz is more about running the system without a heatsink. Give one a heatsink and they run at over 2Ghz. The perf bump from 1.5 to 2.2Ghz is not insignificant. https://www.jeffgeerling.com/blog/2020/raspberry-pi-400-can-be-overclocked-22-ghz https://www.jeffgeerling.com/blog/2020/raspberry-pi-400-can-... https://hothardware.com/reviews/hot-clocked-pi-raspberry-pi-4-benchmarked-at-214-ghz https://hothardware.com/reviews/hot-clocked-pi-raspberry-pi-... Also: Arm itself says the A55 is ~18% faster than the a53. So, its still quite slow.
heavyset_go 6y ago
I'm unaware of ARM SBCs that have as much support from their vendors as the Raspberry Pi models do, though.
- ac29 6y ago
  Pine64 is a probably a pretty close second. For example, many of their boards are supported by upstream Debian [0], which isnt true for the RasPi devices. [0] https://d-i.debian.org/daily-images/arm64/daily/netboot/SD-card-images/ https://d-i.debian.org/daily-images/arm64/daily/netboot/SD-c...
scoopertrooper 6y ago
If you like poorly documented/supported hardware, try taking a stroll outside of the Raspberry PI ecosystem. I bought myself a rk3399 based compute module a while ago, the support was... sparse. * The small amount of documentation that does exist is vague and incomplete. Many of the links were actually broken, so I had to fall back to using the docs for older models. * The key expired on their apt repo and they never bothered to renew it. * The selection of prebuilt Linux distributions is small and several generations behind. * The community is small, so you can’t rely on things like stackoverflow as much as you might in PI land. Overall, I had a good time with it, but getting started on a PI would have been so much easier.

ed25519FUUU 6y ago

How does the onboard battery charging IC work? Can I hook up a 3s li-ion battery and charge it via the 12v power input? Does the battery kick on if the main PSU is interrupted?

qchris 6y ago
I think that this could be an underlooked, but absolutely killer feature for this board. Built-in support for high-capacity li-ion batteries that automatically kick-in for a battery backup would be awesome for homemade NAS set-ups, not to mention a whole host of robotics-y or home automation projects.
- amelius 6y ago
  Yeah, but you'll have to power your modem too.
  - JustSomeNobody 6y ago
    These work really well for that task. Can power a cable modem and a small edgerouter-x using a y-cable. https://www.ebay.com/itm/Belkin-Residential-Gateway-Battery-Backup-REV-B-w-Battery-BU3DC001-12V/274684107792?epid=1600149188&hash=item3ff472dc10:g:fqAAAOSwuuFgFJzX https://www.ebay.com/itm/Belkin-Residential-Gateway-Battery-...
- ac29 6y ago
  I dont see how a battery attached to the board would do much good for powering your drives in a NAS situation - they'd still need their own UPS.
- eqvinox 6y ago
  A killer feature that can be replaced by a 6€ external module? https://www.ebay.com/itm/402641596500 https://www.ebay.com/itm/402641596500 (you can get crappier ones for 2€... this one has a charge controller [MCP73833] from a recognizable brand [Microchip] with datasheets available)
6y ago

Funes- 6y ago

Coupled with that 10-inch e-ink panel that they mention will be available when it launches, this could make for a great machine for working (reading, writing, coding...). I hope the price is not very steep.

ed25519FUUU 6y ago
I worry more about the price of a 10 inch e-ink panel.
- Funes- 6y ago
  I was referring to the sum of both--to the price of that particular machine (SBC + e-ink panel) I just described.
- megous 6y ago
  Yeah, those can easily be in the $200 range.
- FlyingSnake 6y ago
  Cost of Pine64 SBC: $64 Cost of e-Ink panel: $50 Money paid to patent owner: $300
- captainmuon 6y ago
  Don't worry about the price - when the e-ink patent overlords learn that they are not being used for blessed purposes (digital signage or ebook readers) but as general purpose display sold to end users (gasp!) they'll probably become mysteriously unavailable. (Source: our company tried to buy e-ink displays to integrate into a product. All I can say is, it is difficult...)
  - CameronNemo 6y ago
    Kobo's Clara HD is 99$, runs post market OS, has a small 1GHz core and 512 MB of RAM. Great low end option IMO.
    - 6y ago

1-6 6y ago

This is the real star of CES (just kidding). Where can I put my preorder?

rbanffy 6y ago

With 8 GB it becomes a viable small desktop box.

CameronNemo 6y ago
I tried the rk3328 on my 1080p monitor. Was fairly slow, and video playback was problematic. Otherwise good enough for light usage. Hopefully the Rockchip VPU patches are still making progress.
PragmaticPulp 6y ago
With all of the connectors and interfaces, this is more of a dev board. The article notes that CPU performance is similar to the Raspberry Pi 4, which is already available with 8GB of RAM and has better mainstream support.
- ggm 6y ago
  Lacks the PCI. If you get the compute boards, you can get it, and then use a carrier board to do things e.g. quad-Sata disk stuff. I'm using the Pi4 with the 4 port SATA card through USB, and its just-about ok. I'm happy, but I'd love to try direct PCI access
pjmlp 6y ago
Slackware 2.0 ran on 16 MB, with X.
- rbanffy 6y ago
  If you can fan out enough RS-232 ports out of the USB's, you can probably run an 80's corporation with terminals for everyone out of one such board.

martin__ 6y ago

I've been meaning to buy something from pine64. This might finally be it; especially with that e-ink screen. I just joined the mailing list. Hopefully I can snag one of those.

linsomniac 6y ago
One word: Pinecil

holri 6y ago

Will this run on a mainline kernel?

CameronNemo 6y ago
Not yet. Hopefully eventually.