7 ms·
There's a whole community of "CRT enthusiasts" who search these out on Craigslist now, and buy them for retro video gaming setups. A big Trinitron CRT 27 to 36
by walrus01 7y ago
There's a whole community of "CRT enthusiasts" who search these out on Craigslist now, and buy them for retro video gaming setups. A big Trinitron CRT 27 to 36 inches in size, in good condition, is actually appreciating in market value now due to how many of them have been trashed.
Sony PVMs (professional video monitors), such as used in a tv production studio have been increasing in market value. Similar tubes but with more advanced electronics.
To the best of my knowledge there are zero remaining manufacturers of CRTs in the world.
- phkahler 7y agoI wonder if it's possible to wind a new yoke and make a vector monitor out of a Trinitron. That would be the ultimate gaming experience.
- mark-r 7y agoThe Vectrex was a video game that came with its own vector monitor built in. It was only black and white and relied on plastic screen overlays to get color in different parts of the screen. https://en.wikipedia.org/wiki/Vectrex https://en.wikipedia.org/wiki/Vectrex
- pryelluw 7y agoI dont own a trinitron, but own a huge and heavy crt for my snes gaming needs. It was free at a garage sale.
- flylikeabanana 7y agoFor Super Smash Bros Melee (released 2001), it's an existential issue. Many high-level interactions in the game move so quickly that issues playing on modern LCD TV's a non-starter. 1000 entrant tournaments need enough CRT TV's to support them. Tournament organizers often will keep a cache of CRTs specifically to host melee tournaments.
- aeyes 7y agoThe problem is the significant input lag most modern TVs have.
- Grazester 7y agoNot on modern TV's and monitors. They have less than 2ms latency now.
- p1necone 7y agoThe vast majority don't, you can get one that does but you have to do your research. The "response time" listed in monitor/tv specs is not the same as the input lag. TVs are especially bad, in the default mode some of them have ~200ms input lag. "Game Mode" usually brings it down to more like 20ms though. Edit: did a google, don't know how accurate these are: https://www.rtings.com/tv/tests/inputs/input-lag https://www.rtings.com/tv/tests/inputs/input-lag
- OnlineGladiator 7y agohttps://www.rtings.com/tv/tests/inputs/input-lag https://www.rtings.com/tv/tests/inputs/input-lag It seems most get under 20ms lag when put into game mode, which I'd think is what matters to most people. At that point, when it isn't daisy-chained with any other lag (so a wireless controller delay will make a difference), it's imperceptible to me. I am not a professional gamer though, and from what I understand the higher refresh rates that pro gamers use (such as a 240 Hz monitor) have measurable improvements in their performance as gamers.
- p1necone 7y agoHaha looks like we googled the same thing at the same time. This seems to just be TVs too - monitors get much better numbers. I find higher input lag to be much less of an issue when using analog sticks vs a mouse. For me at least the difference between ~2ms and ~10ms input lag is very noticeable when aiming with a mouse, but basically imperceptible with say a wired 360 controller (I'm assuming the 360 controller isn't adding significant input lag itself though).
- leecb 7y ago> To the best of my knowledge there are zero remaining manufacturers of CRTs in the world. I have seen plenty of stores selling (small) CRTs in stores in Asia. They are usually quite small, and I bet they are quickly disappearing, but they are still around.
- philg_jr 7y agoUgh my grandparents gave me a modern 36in Trinitron when I was in college. I ended up leaving it with one of my old roommates when I moved out, mostly because I didn't want to move it again. It felt like it was made out of solid glass, it had to be near 200 pounds (probably exaggerating, but it was heavy and extremely awkward to hold while moving with two people). I'm kinda wishing I still had it now.
- OnlineGladiator 7y agoNot sure about which model, but 200 pounds is actually a bit light for a 36" CRT. https://www.cnet.com/products/sony-kv-36fs12-wega-36-crt-tv/ https://www.cnet.com/products/sony-kv-36fs12-wega-36-crt-tv/ (It's 222 pounds for those who don't want to click the link). I used to lug around a 27" CRT by myself every time I moved, and it was a giant pain in the ass. It was worth it though for the picture quality.
- Symbiote 7y ago→ 101kg (I suspect the figure in pounds, 222.66lb, has been converted from this.) And for that matter, 36" ≅ 91cm, 27" ≅ 69cm, although strangely TVs are still advertised in inches in many otherwise-metric countries.
- OnlineGladiator 7y agoAt first I wasn't sure why you were making this comment, then I realized many HN readers might not be familiar with US-centric measurements. I guess I'm Americentric. https://en.wikipedia.org/wiki/Americentrism https://en.wikipedia.org/wiki/Americentrism
- walrus01 7y agoIf you think that's heavy I've seen people selling 40" CRTs, which I think weigh around 315 lbs
- bearcobra 7y ago> it had to be near 200 pounds (probably exaggerating You are probably pretty close based on the details here: https://en.wikipedia.org/wiki/FD_Trinitron/WEGA https://en.wikipedia.org/wiki/FD_Trinitron/WEGA
- bsder 7y ago> A big Trinitron CRT 27 to 36 inches in size, in good condition, is actually appreciating in market value now due to how many of them have been trashed. Yeah, not for very much. And certainly not for an amount worth dealing with the "You should take money off that because it doesn't have HDMI. Hurr-durr." crowd on fleabay. When I see my Sony GDM-FW900 boat anchor actually selling for more than $1000, then I'll believe you.
- walrus01 7y agoThat specific model of Sony, I have literally seen sell for more than $800 in the enthusiast market. Search for sold items on ebay.
- SamReidHughes 7y agoYes, it's up to $999 now. I bought mine in 2013 or 2014 for $900, in excellent condition, and the seller's next one got listed for $1K, so there's not much of an increase.
- jotm 7y agoThat's... Insane. I've got 3 Samsung CRTs and a Benq collecting dust for more than a decade. No one gives a flying fuck about them here, could probably get a dozen more for like 10 dollars each...
- SamReidHughes 7y agoOh yeah, almost anything besides that one is way cheaper, even a big 1600x1200 model. For what it's worth, doing the Pantone Color IQ test on that screen was a triviality compared to the same on the Dell U2410, which is pretty easy compared to performing the task on a cheap temporal dithering office LCD in 2014.
- busterarm 7y agoThere's a huge amount of variance in CRTs and the last Trinitrons made are the holy grail in terms of features and display quality. Specifically the BVM-D24E1WU & BVM-D32E1WU. They usually go for a few thousand dollars un-calibrated, with tube issues, and without the required addon cards (broadcast trinitrons have add-on cards giving different features like PCs) and master broadcast remote control receiver. The RGB module for these specific models is practically un-obtainium, with less than 150 produced globally, and everyone looking for these monitors now needs one. They sold for over $20k when they were new twenty years ago. If you're looking to get one fully-loaded and in proper shape, expect to drop 6-8k. And there's only one guy still doing routine service of these who has adequate spare parts & knowledge, he's in Southern California and he won't ship the best models because of the huge risk of damage.
- Scoundreller 7y agoAlso, Duck Hunt only works on CRTs.
- mark-r 7y agoThe gun relied on the phosphor fade to detect where it was aimed. Since the electron gun was scanning, the timing of the peak light detection would tell you what point was in the gun's focus.
- lightedman 7y agoThe gun used a photodiode which waited for the inserted frame signal after a shot to see if a valid target was what you were aiming at (you can see this emulating Duck Hunt and slowing down the game framerate, there's a bright flash of light over the ducks which the lightgun, if aimed properly, will detect, sending the signal back to the console and basically telling it where in the in-progress frame it hit.) You could easily defeat this by pointing the gun at a regular incandescent light bulb - the game would always register a hit at the first valid target in order of how the screen is drawn. If you got both ducks at once, whichever one was closest to the upper left bounds was the first to down, and the remaining one would be the second to down. Its the only way I've gotten to the kill levels in Duck Hunt when I was a child. https://youtu.be/DzIPGpKo3Ag https://youtu.be/DzIPGpKo3Ag - video of actual modification of zapper to LCD compatibility, with demo of how the Zapper actually works.
- pkorzeniewski 7y agoBelieve it or not our only TV set is from 1985 (Blaupunkt Scout T8 [1]) and we use it daily :-) We didn't have a TV by choice for the last several years and just used laptop when we wanted to watch a movie, but as I got more and more interested in stuff from the 80s, I started looking for an old TV as a fun project to try connect HDMI to it, play NES and so on. Long story short (because I could talk a lot about it) the TV somehow stayed with us for 2 years now and we don't plan to get rid of it anytime soon. It has a beautiful form factor, the image and sound quality is surprisingly good and we simply don't feel the need to change it for a modern one. [1] http://www.hifi-archiv.info/Blaupunkt/1984-85/17.jpg http://www.hifi-archiv.info/Blaupunkt/1984-85/17.jpg
- ikeboy 7y agoA casual search turns up https://www.thomasnet.com/products/cathode-ray-tubes-crt-88571427-1.html https://www.thomasnet.com/products/cathode-ray-tubes-crt-885..., with 23 CRT manufacturers as of now. Are the products they sell different in some important way?
- userbinator 7y agoThose look like military/aerospace suppliers, i.e. astronomical prices and very specialised designs. Also, picture tubes are CRTs, but not all CRTs are picture tubes.
- ikeboy 7y agoSome are specialized, but e.g. https://dotronix.com/ https://dotronix.com/ looks like they offer CRT monitors to businesses and would presumably not be insanely expensive.
- bluedino 7y agoI've been picking up Sony Vegas that I see on the curb and can usually sell them for $100. My back is going to make me pay as they are about 160-180lbs for the 32" models
- mattkrause 7y agoVisual neuroscientists too! CRTs update in a nice, predictable order, can have crazy-high refresh rates, and don't do anything clever (or slow) with their inputs. This makes them perfect for experiments that require showing stimuli precisely and promptly. More recent displays do all kinds of weird trickery that either changes what's actually shown (e.g., motion blur) or presents it at some hard-to-determine time.
- takeda 7y agoIt's probably just limitation of LCD. I remeber using laptop in 90s and refresh rate was so bad that if you moved a mouse it was not visible (the motion blur special effect for the mouse pointer in early Windows helped a bit with this, I was also wondering if maybe that was the reason it existed). Since then LCD studios made huge progress, but maybe still can't compare with CRT. OLED magnitude faster than LCD, I'm wondering how these compare.
- SmellyGeekBoy 7y agoSounds like a DSTN screen, as used on early ThinkPads: https://en.wikipedia.org/wiki/Dual_Scan https://en.wikipedia.org/wiki/Dual_Scan
- takeda 7y agoI don't remember much, but it might be a thinkpad, it had the nub instead of touch pad or track pad.
- walrus01 7y agoSounds like the difference between passive and active matrix LCDs. Passive vs. Active screen was a big differentiator in cost and screen quality in early to mid 1990s laptops. https://en.wikipedia.org/wiki/Passive_matrix_addressing https://en.wikipedia.org/wiki/Passive_matrix_addressing
- mattkrause 7y agoNah, our displays aren't that old. Many models now include "smart" features that do things like motion blur, contrast adjustment, etc that probably do make the picture look better (i.e., "more cinematic") when used normally. These features just clash with niche uses, like vision research and competitive gaming, that would prefer pixel-accurate, predictable updates. It's surprisingly hard to figure which consumer monitors have what features. There are "research" displays that don't have these features, are calibrated, update in a predictable way, etc, but they're eye-wateringly expensive. In some sense, we were spoiled with CRTs, which were too dumb to do anything but sweep from top to bottom, left to right, over and over. Of course, it was much harder to generate dynamic stimuli back then too, so it's a mixed bag.
- snvzz 7y ago>retro gaming setups Do consider the OSSC (Open Source Scan Converter). It works line by line, so it adds virtually no latency to the chain. It is OSHW and FPGA based, getting regular updates. It doesn't do s-video or composite, but otherwise it is imho much better than the closedhw framemeister, which buffers entire frames and is less flexible.
- SmellyGeekBoy 7y agoHook it up to a RetroTINK-2X in passthrough mode and you'll get lag-free composite and s-video too!
- snvzz 7y agoWhile retrotink's likely about the better option for composite and s-video, it's unfortunately not OSHW. There's hope they'll add support for composite/s-video/rgbi to OSSC at some point, be it a new revision or a daughterboard. I'll survive until then... so far I haven't needed those inputs fortunately. If I can mod the source to output rgb I'll always do that.