9 ms·
Ploopy: An Open-Source Trackball
- wildylion 7y agoArgh! The website is DOWN!
- andai 7y agoAaa! You killed it!
- crtlaltdel 7y ago> Everything is there for you to see. What parts did we use? How did we design the case? What kind of swear words did we use in the firmware code? It's all there, including build documentation. I must have missed the swear words...
- throwaway744678 7y agoDidn't look at the code yet, but some Reddit usernames in the testimonials section are spicy!
- illuminati1911 7y agoI'll probably get crucified for this, but does someone actually want to use trackball mouse? Has anyone even seen these after 1990s?
- mistaken 7y agoI never had a trackball, so I'm curious about what benefits a trackball mouse has. Why or why wouldn't you use it over a regular mouse?
- TheDong 7y agoThe main draw is that you don't have to move your entire hand / the mouse along a surface. That means your wrist sees less strain + motion, and you have no need for a mouse-pad, to name two possible benefits. Some people find it to be more precise as well, but I don't know if there's any evidence apart from personal preference. Of course, your wrist still moves some as you manipulate the ball with your fingers, and if you use a trackpad you already don't need a mousepad-like-surface.
- pmarin 7y ago> Some people find it to be more precise as well, but I don't know if there's any evidence apart from personal preference. On CAD applications is very annoying when the mouse unintentionally register a movement while clicking a button which never happens with a trackball.
- dbcurtis 7y ago> Some people find it to be more precise as well, but I don't know if there's any evidence apart from personal preference. Well, for me it is much more precise. Or at least seems more natural. But... ergonomic warning... I switch up between three different trackballs to keep “trackball thumb” from setting in. I get pain in the base joint if I don’t vary the angle, and also spend some time using a finger-positioned trackball.
- 2muchcoffeeman 7y agoIt also takes up much less space and you can use a trackball anywhere because you don't need a surface.
- killjoywashere 7y agoTrackballs date back to the 60s, at least. The original design advantage of a trackball was pursuit and target acquisition. They were developed for military radar operators to quickly move the focus to an inbound bogie, potentially supersonic. If they could acquire and track the target on air search radar, they could mark it twice on two consecutive sweeps of the air search radar, giving the fire control system a course and speed so the fire control radar had a better shot of getting a lock. My first four years out of college I spent a lot of time in that space, so I got quite comfortable with trackballs. Now I use them exclusively on my desktop. My only complaint is they aren't embedded flush in the desktop :)
- _trampeltier 7y agoThe trackball always does stay on the same place. You can have the trackball close to your keyboard, so you can click the "Enter" key from your numpad .. sometimes this is useful. I use mostly a trackball on work and at home.
- toast0 7y agoI have a trackball on my main desktop. They work just fine, and take up less space than a mouse, because you don't need to move them around. I'd actually love a laptop with a trackball instead of a trackpad, but nobody mainstream makes those.
- pkulak 7y agoI only use them. It's just more comfortable and accurate for me. It's like using a track pad, but with real weight and momentum. And I never got into bolting vim bindings on every app I use, so my trackball gets a good amount of use.
- kimburgess 7y agoYep - switched to one last week: https://twitter.com/_______kim/status/1179937109357953025 https://twitter.com/_______kim/status/1179937109357953025. I use a keyboard for most interaction (XMonad, vim shortcuts in most apps) so YMMV, but really enjoying it so far. The weighting is beautiful, there's four map-able buttons, but the nicest element is a ring that sits around the ball. Spinning it in each direction acts as a scroll and is one of nicest feeling inputs I've used.
- tiew9Vii 7y agoI solely use the Kensington SlimBlade on my desktop. It's fantastic especially for general purpose work and browsing, browsing is so much more easier with the SlimBlade, turning the ball to scroll. The only time I find a mouse more efficient is if doing lots of selecting text and copy/pasting or diagram type apps. I have a backup mouse for when a mouse is more useful but almost never use it. I was getting minor RSI which is why I originally thought i'd try a trackball. Glad I got one, it's so much more comfortable and wrists / arms now stay relativity still. It's just a shame the form factor isn't that great for carrying about with a laptop.
- SoapSeller 7y agoAnother Slimblade user here - it's the best pointing device I've ever used. The scrolling with the ball itself is a killer feature. I'm using it for ~2 years now, before I had the expert mouse for about 10 and before some PS2 trackball. The Slimblade is by far the best - both ergonomically and and mechanically. (previous trackballs tend to collect a lot of dirt and required frequent cleaning, this one have a hole beneath the ball that prevents accumulation)
- etatoby 7y agoI've been using the Slimblade for years. I even contributed a small change to Xorg evdev input driver (the Emulate3Button option) to work around the weird internal numbering of the buttons on the device. On my couch / entertainment computer I use a Logitech M570, but for work nothing beats the Slimblade.
- leovander 7y agoI usually get people to start with the Logitech M570[0]. If they like it they usually stick with it and since its small they tend to set it perpendicular to their body in front of their keyboard. So far only one convert has upgraded to a larger Logitech one with a wrist guard. I am rocking CST2545W(GL) BLUE[1] now-a-days. With plenty of other track balls you can see over on r/trackballs[2]. [0] https://www.logitech.com/en-us/product/wireless-trackball-m570?crid=7 https://www.logitech.com/en-us/product/wireless-trackball-m5... [1] https://www.clearlysuperiortech.com/cst2545w-gl-b https://www.clearlysuperiortech.com/cst2545w-gl-b [2] https://www.reddit.com/r/Trackballs/top/?t=all https://www.reddit.com/r/Trackballs/top/?t=all
- tech-no-logical 7y agostill using my original logitech marble fx, bought 17 years ago. it travels with me from job to job :)
- bigjimmyk3 7y agoI still consider this model the apex of trackball design, and I have regretted selling mine for over a decade. The way it allows the use of both thumb and index fingers for pointer control is something I haven't seen replicated elsewhere.
- marceldegraaf 7y agoI've been using a Logitech trackball (where you control the ball with your thumb) for years, since the TrackMan Wheel Optical iteration all the way to the current MX Ergo line. My hands are too big for most normal mice; trackballs are just way more comfortable for me.
- sbr464 7y agoIt’s a good question. I’ve been exploring various dual handed input/UX patterns lately. For GIS/mapping applications, being able to use a mouse with a secondary trackball in the other hand, has shown dramatic results in testing. I can see why 3dConnexion has done well in CAD/3D apps, but I think a resurgence in designing creative combinations of input hardware is long overdue.
- itronitron 7y agoYes, I've used the logitech one (with the blue marble) for probably over 15 years now as I was getting wrist pains from using a mouse. Advantages are that you can just rest your hand in one spot, and even rest the trackball directly on the laptop (bottom right corner) if it is large enough. My only complaint is that the trackball (on the M570) should be 2X it's current diameter, I don't know why they make them so small.
- Krasnol 7y agoI managed to get half of my department to switch to a trackball. Even the secretaries got one (after that the department head stopped buying them because MX Ergo are expansive compared to a cheap mouse that comes with the computer...). I also got my SO and her parents to switch. My SO plays games a lot and had started getting problems around her wrist. She never came back to the mouse. It's fantastic.
- mkl 7y agoI have used them for years, and almost exclusively for the past three or so. I own about 8 (3 in active use, ~2 only useful for parts). Kensington Expert Mouse (USB, not wireless) is my main model - I use three of them daily (2 at home, 1 at work).
- orpheline 7y agoYep! I like that the mouse is always in exactly the same place on my desk (s), so muscle memory always lands on it (especially useful in my home office, because the keyboard tray doesn't have much room to move a traditional mouse. My mice have thumb trackballs: my fingers stay on the mouse buttons while I use my thumb to scroll, so I don't need to lift them to move the mouse pointer.
- hlieberman 7y agoSoooold.
- kstenerud 7y agoYou'd have to buy up an awful lot of $25 Logitech trackmans over the years to match the hefty $200 purchase price of one of these.
- iMarv 7y agoDoing pretty well with Logitechs MX Ergo which also looks more polished than this open source alternative. I am fine with paying for closed source products if they are good and can be used without a hassle.
- rf15 7y agoafaik they still use cheap switches for the main buttons in those, which lead to problems with the previous model of that line. (mostly the left mouse button failing after 2y). I will still use them, but I am definitely looking for a good alternative with better parts.
- Krasnol 7y agoMine must have or reach 2y soon. I got one just as it's been released for work. Doing a lot CAD with it. Doesn't look like it's getting worse.
- Krasnol 7y agoI love the Ergo. Bought two (in case they stop selling them at some point) and forced my employer to get me one (for H&S reasons). I've been using the pointer finger track ball for years but this feels so much better. Also it's good for people with big hands. The only downside is the rubber downside of it. It got unstuck so I had to glue it back onto the metal part. They really didn't think much about that.
- sheeshkebab 7y agoMicrosoft should really do another batch of its Explorer trackball mouse - paying >$500 for a used one makes me cringe, once mine finally bites the dust, after almost 20 years of use.
- mhd 7y agoI used trackballs pretty heavily years ago, but as that was a TrackMan Marble (PS/2, three buttons, no friggin scrollwheel), I got some issues with my thumb after a few years. I used a huge old one for a while (with a serial adapter I think), which probably could've accepted a billard ball as a substitute. After a while, you got pretty intuitive and just "threw" it in the right direction, then made a minor adjustment. Loved it. I also remember when it was all the rage with FPS players…
- SoapSeller 7y agoSomething like this [0]? I have the same model, I try not to pick the(stock) ball and fidget with it too much - as I'm worried about damaging it - it's a fun feature nonetheless. I'm still using trackball for FPS(e.g Battlefield V), not sure if it gain me any advantage. (Beside snipping, where the ability to click eithout causing a move is useful) [0] https://www.trackballmouse.org/kensington-expert-trackball-in-the-movie-oceans-8/ https://www.trackballmouse.org/kensington-expert-trackball-i...
- mhd 7y agoHah, not that modern, although I think I thought about getting that Kensington model. I think it was a version of this: https://i.imgur.com/T4MQsEj.jpg https://i.imgur.com/T4MQsEj.jpg
- xenonite 7y agoActually, I am a huge fan of Logitech's TrackMan Marble Mouse and can recommend it wholeheartedly. I use it since about 20 years, renewing it every couple of years. I am sorry for your thumb, I luckily haven't had problems yet. Before that, I have used various trackballs (Microsoft Trackball Explorer, several Kensington, Logitech Cordless Optical TrackMan) but came to stick with the TrackMan Marble. Especially, I dislike those requiring the pointer finger for clicking - I prefer the pointer finger to move the pointer. It is much more precise. Leaves the strong thumb to thumb the button. And for the question on scrolling: I press one of the small buttons, then scroll using the ball both horizontally and vertically. This can be configured in Windows, macOS, and X.
- gorgoiler 7y agoWhat’s up with all the tiny metallic holes in their circuit board? It looks like they are there waiting for components to be soldered in but the finished product isn’t using them. Do they serve some other purpose?
- frabert 7y agoThose are called "vias", they connect traces on the top copper layer to traces on the bottom.
- gorgoiler 7y agoThanks! It looks like a lot of them have an associated circuit track and they are placed where they are needed and not according to any kind of greater pattern, which makes sense. However, lots of others are placed regularly around the edges of curved surfaces. Are they “via fences”, to block electromagnetic interference? https://en.m.wikipedia.org/wiki/Via_fence https://en.m.wikipedia.org/wiki/Via_fence
- frabert 7y agoCould be! Sorry, I'm not an expert and I have not looked at the schematics... EDIT: On further inspection, they look like they are "stitching" two copper pours together, presumably ground or power, in order to decrease impedance maybe.
- gorgoiler 7y agoIt could be this, mentioned in the schematic: “Spark Gaps - Case: Since the case has gaps in it we expect [electrostatic discharge] to worm it’s way in via creepage and perhaps other ways. To protect the board from this eventuality, we place spark gaps along the edges.” https://github.com/ploopyco/mouse/blob/master/hardware/Electronics/Schematics/Base-R1_003.pdf https://github.com/ploopyco/mouse/blob/master/hardware/Elect... So technically a via fence, but not quite as sophisticated.
- yitchelle 7y ago
- jnellis 7y agoSome of us have been waiting for this trackball. Not just any trackball, this particular and exacting design of trackball. Twenty years ago Microsoft came out with a $35 trackball called the Microsoft Trackball Explorer. The single most awesome input device ever designed. Then for some reason they stopped selling them. The price for used ones and lost inventory has been increasing ever since. Just check out the amazon page for it. Read some of the reviews. https://www.amazon.com/Microsoft-D68-00007-Trackball-Explorer/dp/B00005853Z/ https://www.amazon.com/Microsoft-D68-00007-Trackball-Explore... Over those twenty years I've acquired three of them for parts. Two of the people I've gotten them from asked to buy them back once they spent time without them. The design is simply that amazing and to think it came from Microsoft and was originally $35, often a combo buy with their 'web' keyboard. So it will be interesting to see how much this reverse engineered version will feel like the original.
- sdrothrock 7y agoI just switched to a trackball last week and spent a lot of time looking into these; the Microsoft one came up a LOT, but so did a cheap one from Elecom called the Huge. I ended up getting the Huge (since I live in Japan and it's easy to get here) and I'm liking it a lot. I'm wondering if it hits the same buttons that you like with the Microsoft one.
- jnellis 7y agoI've had that in my wishlist for a couple years now but haven't bought it since my MTE hasn't broken again since my last rebuild. The key difference between all other trackballs on the market is that they are all thumb controlled on the ball. The Elecom is an index finger ball like the MTE, and if you read the reviews has a lot of MTE converts. I've probably bought every trackball style and keep going back. Kensington Expert Mouse was a good contender years ago but their quality dropped sharply once they got semi-popular in the late 2000's. Logitech trackballs are pretty much all garbage. Also on my to-try list is a rollermouse. https://www.contourdesign.com/product/rollermouse-red/ https://www.contourdesign.com/product/rollermouse-red/
- 7y ago
- dmitrygr 7y agoFrom the code repo (https://github.com/ploopyco/mouse/blob/master/firmware/production.ino https://github.com/ploopyco/mouse/blob/master/firmware/produ...): // Startup delay. This sometimes prevents a USB handshake lockup. delay(1000);
- saagarjha 7y agoHey, at least they're open about it. I would be surprised if most of my hardware didn't have something like that in it.
- abledon 7y agofinally some honest code, read a HN thread a while back about the Excel source code, and how some comments in it said "dont touch this" and something about how they didn't really know why it worked, but if that line was removed the whole loop broke.
- yitchelle 7y agoAnother gem at (https://github.com/ploopyco/mouse/blob/master/firmware/SROM_0x04_Arduino.ino https://github.com/ploopyco/mouse/blob/master/firmware/SROM_...) // This is the firmware that is uploaded to the PMW3360 each time the mouse starts up. // Don't mess with this. Just...just trust me. Don't do it.
- SuperPaintMan 7y agoThe irony of that comment is that me and buddy are porting QMK to it right now and had to add to it :)
- deleted 7y ago[deleted]
- stuffbyspencer 7y agoI love open & new hardware stuff like this. Currently using an Ergo Dox keyboard & I firmly believe it has saved me lots of wrist pain to date (plus I look hella cool typing without looking now, and my WPM has gone up rather nicely). Excited to see who this fairs!
- xenonite 7y agoThis leaves room for a trackball that requires the pointer finger to move the pointer. This way of pointing feels much more precise, and leaves the strong thumb to thumb the main button. And for the question on scrolling: let me press an additional button that enables scrolling with the ball, both horizontally and vertically. The Logitech TrackMan Marble would, in my opinion, be a wonderful example for such a trackball. (Here, the described scrolling behavior can be configured with the Logitech driver on Windows, with Karabiner on macOS, and by mapping a scroll modifier button in xorg.conf setting in X, see https://wiki.archlinux.org/index.php/Logitech_Marble_Mouse#Scroll_modifier https://wiki.archlinux.org/index.php/Logitech_Marble_Mouse#S... )
- sdrothrock 7y ago> And for the question on scrolling: let me press an additional button that enables scrolling with the ball, both horizontally and vertically. I mentioned this in another comment, but on macOS, there's a utility called SteerMouse (http://plentycom.jp/en/steermouse/index.html http://plentycom.jp/en/steermouse/index.html) that apparently supports chording for scrolling with the ball and is compatible with a number of different trackballs. Sadly, I've found that that particular feature isn't working properly on Catalina with my Huge, but I contacted the dev and he said he's looking into it. So fingers crossed...
- mkl 7y agoIn my experience, it's even more precise to use multiple fingers at once. I use two or three on symmetrical trackballs like that. Using software for a scroll button like that is often annoyingly flaky and inconsistent in practice, as too much software isn't expecting it or tries to do its own special thing (websites in particular for the latter). I haven't used a trackball that does it in hardware, but that may run into issues too, as a lot of software is built to scroll in whole numbers of lines, and so feels unresponsive to more precise scrolling methods (e.g. scroll button or touch screen).
- Terretta 7y agoKensington Expert Mouse, designed to point with your fingers. The ball has weight and diameter for both speed and accuracy, surrounded by a ring for scrolling. // See mkl’s sibling comment, also elsewhere in this thread.
- titchard 7y agoThis is an interesting project - my first thought would be to flip it, as I am left handed and would benefit from it being oriented that way.
- mkl 7y agoI use trackballs left handed - there are several symmetrical ambidextrous models available. I feel like I'm promoting overly much in this thread, so please just see my other comments for what I use!
- titchard 7y agoI have just found the one you use - will do some research! I do a lot of Fusion 360 work and I always feel like a trackball would help.
- 2muchcoffeeman 7y agoNo minimal kit so I can print the case myself?
- Crono 7y agoAs a owner of a 3D Printer i was asking myself the exact same question. Also: The printed parts on the pictures look ok, but not exactly good. I understand that you have to take print time into consideration while mass production, but this is a device that directly interacts with a users hand. Sanding is needed in this case. Or: Printing it by myself in a decend resolution. Would be nice to have this option and pay a bit less for the kit.
- igetspam 7y agoId probably be in if it were wireless. I miss my old trackman and the Microsoft design was almost as good (for me). I don't have room for yet another USB connected device. I already have two hubs feeding various components and using a standing desk stand thing means I move the position of the keyboard and mouse quite often. Love the design. Will keep watch. Thank for sharing.
- anarcat 7y agoi would love to see one of those in the shape of the Kensington Expert Mouse, the square mouse with the ball in the middle, with the scroll wheel as a ring around the ball. it's the best mouse I've ever used...
- orpheline 7y agoMy personal favorite is an Elecom left-handed model: ELECOM M-XT4DRBK Wireless Trackball mouse for Left-Handed, EX-G series L size 2.4GHz 6 buttons Black https://www.amazon.com/dp/B016QCPRBM/ref=cm_sw_r_cp_apa_i_0jZPDbF7Y3G72 https://www.amazon.com/dp/B016QCPRBM/ref=cm_sw_r_cp_apa_i_0j... I've got one at work, one at home: very comfortable and intuitive to use.