4 ms·
The Vacuum Tube’s Many Modern-Day Uses
- sehugg 8y agoIn 2002, you could buy a PC motherboard with a sound section amplified by a dual-triode vacuum tube. You can still find them on eBay: http://ixbtlabs.com/articles2/aopentube/ http://ixbtlabs.com/articles2/aopentube/
- dharmab 8y agoThere's still a market for tube amps, although most are external for both aesthetic and practicality purposes.
- rolltack 8y agoGuitar amps too!
- SmellyGeekBoy 8y agoReminds me of the people who hook their Raspberry Pi up to a tube amp just to listen to Spotify.
- dustycat 8y agoPeople who are interested in vacuum tube technology might enjoy the following youtube channel: https://www.youtube.com/user/MrCarlsonsLab https://www.youtube.com/user/MrCarlsonsLab
- jhallenworld 8y agoA counter channel (hilarious guy revives old TVs sitting out in the desert for 50 years). He's the voice of LA: https://www.youtube.com/user/shango066/videos https://www.youtube.com/user/shango066/videos Also, make your own tubes (in Texas while wearing a dress): https://www.youtube.com/user/glasslinger/videos https://www.youtube.com/user/glasslinger/videos
- burfog 8y agoI didn't see too many uses listed. Here is one: https://en.wikipedia.org/wiki/Active_Denial_System https://en.wikipedia.org/wiki/Active_Denial_System https://en.wikipedia.org/wiki/Gyrotron https://en.wikipedia.org/wiki/Gyrotron https://www.sciencedirect.com/science/article/abs/pii/S0042207X13001516 https://www.sciencedirect.com/science/article/abs/pii/S00422...
- madengr 8y agoIf you search for “The Tube Guys”, the front cover of that book shows a 94 GHz, 1 MW tube used for an airborne active denial system. Traveling Wave tubes are still widely used for SATCOM.
- CamperBob2 8y agoOther than ADS systems, and the audio and microwave ovens mentioned in the article: - Huge-ass klystrons used to drive particle accelerators (which themselves can be thought of as the largest vacuum tubes ever made) - High-power transmitting tubes used in radio and TV broadcasting - TWTs are still used for some satellite communication work, both on the ground and onboard the space vehicles - There's still no solid-state substitute for X-ray tubes. Hard to find a semiconductor with a 50,000-volt band gap - Cesium-beam tubes used for timekeeping (as well as masers used for the same purpose, for that matter), although entire atoms are emitted in those sorts of tubes rather than just electrons If you don't count fluorescent lamps as "vacuum tubes," those are about all the remaining applications I can think of.
- Aloha 8y agoHigh power RF transmitters are still a notable realm of tubes.
- jhallenworld 8y agoTrue, but apparently not any more in the broadcast industry. To make a 50 KW AM station these days, you use 50 1 KW solid state amplifiers and combine their outputs. https://www.youtube.com/watch?v=GXh23qrPniM https://www.youtube.com/watch?v=GXh23qrPniM
- planteen 8y agoIn the microwave frequency range for TWTAs but not so much at lower frequencies. I worked with MRI amplifiers for a while (64 MHz or 128 MHz, depending on 1.5 T or 3 T) and things have gone solid state there. Broadcast seems to have followed the same path.
- walxor 8y agoThe article briefly mentions magnetrons and X-ray tubes, the former of which is made in massive quantities today for consumer appliances. Other vacuum tubes in current use include the vacuum fluorescent display, the photomultiplier tube and the electron multiplier tube. I believe old school vacuum tubes also still have application in high-wattage class-C RF power amps. Vacuum tubes for audio receive a lot of lip service, but they really are botique, lunatic fringe stuff in that application. Magnetron tubes are the only practical choice for microwave ovens; in contrast, power output tubes for audio amplifiers are inferior to semiconductors in every way.
- mmmBacon 8y agoI think you mean traveling wave tubes for high power RF amplifiers https://en.m.wikipedia.org/wiki/Traveling-wave_tube https://en.m.wikipedia.org/wiki/Traveling-wave_tube There are also klystrons, which are oscillators, used for high power radar generation, particle accelerators, etc... https://en.m.wikipedia.org/wiki/Klystron https://en.m.wikipedia.org/wiki/Klystron
- CaliforniaKarl 8y agoAnd of course, there's the Nixie tube. https://www.youtube.com/watch?v=wxL4ElboiuA https://www.youtube.com/watch?v=wxL4ElboiuA (Previously posted in https://news.ycombinator.com/item?id=12623738 https://news.ycombinator.com/item?id=12623738, the maker's web site via https://news.ycombinator.com/item?id=12308974 https://news.ycombinator.com/item?id=12308974, and covered in an IEEE article via https://news.ycombinator.com/item?id=17397133 https://news.ycombinator.com/item?id=17397133)
- i_am_proteus 8y agoWhat this article doesn't mention is why vacuum tubes are still used in guitar amplifiers: The "distorted guitar" sound common in rock music is a direct result of nonlinear characteristics of tube amps (both the tubes themselves and the coupling transformers necessary to connect an output tube to a speaker). Tubes exhibit "soft clipping" when pushed to their limits, which has the effect of producing the harmonic content associated with distorted electric guitar. Rock and roll pioneers got their sound principally from driving tube amps past their limits. "Overdrive" pedals are usually just voltage boosters that make the amp's input signal louder, but this pushes the amplifier past its clean linear section into the nonlinear crunchy overdrive that guitar players want. Modern tube guitar amplifiers, even "new" designs, generally follow one a handful of basic circuit topologies, all derived from a few classic designs. Even the iconic Marshall "Plexi" amp was a close copy of an earlier Fender. These circuits are extremely simple; a handful of tubes, transformers, and passive components, often less complicated than the internals of a single LM741. Here's an example: https://www.thetubestore.com/lib/thetubestore/schematics/Fender/Fender-Deluxe-5A3-Schematic.pdf https://www.thetubestore.com/lib/thetubestore/schematics/Fen... It's possible to mostly recreate this sound with digital signal processing or carefully-tuned solid-state analog circuitry, but players like the sound of tube amps and are willing to pay for them, and so the market exists as it does.
- jhallenworld 8y agoCapacitors are also important: http://www.gibson.com/News-Lifestyle/Features/en-us/3-Classic-Capacitors.aspx http://www.gibson.com/News-Lifestyle/Features/en-us/3-Classi... Some old leaky "bumblebee" capacitor is worth $75 if it happens to be the .022 uF value found in certain guitar tone control circuits.
- dangerbird2 8y agoOne of the main source of innovation in guitar amps (aside from bells and whistles like alternate channels and effect loops) are typically the "tone stack", i.e. the capacitance of the tone control caps and their position relative to the power and pre-amp tubes in the circuit. The amplifier circuits themselves are mostly taken from RCA radio amps dating to the 1930s and licensed by Fender in the 50s.
- raintrees 8y agoGlad I have not jettisoned the two or three boxes of tubes stored up in our water tank tower that I inherited from my father in law - Time to go exploring again!
- hamiltonkibbe 8y agoPhotomultiplier tubes, still pretty much the only solution for photon-counting applications.
- WalterBright 8y agoVacuum tubes can't be that hard to make.
- exabrial 8y agoI recently designed and built my own guitar amp. I highly recommended the book "Designing Preamps for guitar and bass". Absolutely fascinating read and software engineers could learn a lot from the writing style! It's very approachable.