5 ms·
SiFive to release source code to initialize HiFive Unleashed RISC-V board
- rwmj 8y agoPrevious discussion around the closed source DDR initialization block: https://news.ycombinator.com/item?id=17392461 https://news.ycombinator.com/item?id=17392461
- Iolaum 8y agoCongratulations to SiFive for managing to do this !!
- obl 8y agoAs RISC-V moves into "high end" embedded (linux capable, raspy like), I suspect that a big obstacle to openness is going to be GPU IP. HW video decoding, display protocol driving, 3D, ... Is there any open hw initiative on that front that I'm not aware of ?
- sanxiyn 8y agoThe only thing I know about is http://nyuzi.org/ http://nyuzi.org/
- phkahler 8y agoFor video we can hope for free AV1 decode hardware possibly from Google. As for normal GPU functionality, I think the way Esperanto is going will be an option. They want to use thousands of RISC-V cores with vector instructions to do graphics. For general desktop compositing and simpler 3D this should be possible with fewer cores. However well that works or not, even that will be a while. In the mean time I think getting LLVM-pipe or the equivalent working well with RISC-V is important and may be the only viable open-source graphics solution at first.
- zokier 8y agoIsn't that all getting bit ahead of ourselves? Wouldn't the first order of business be creating framebuffer graphics and all the requisite HW needed to drive displays (HDMI/(e)DP/LVDS transceivers etc), and then maybe some basic 2D acceleration (bitblt etc)?
- snops 8y agoFor HDMI/DVI, there are a number of external transmitter ICs that take in 24 bit parallel video/I2S audio and spit out HDMI, e.g. http://www.analog.com/en/products/audio-video/hdmidvi-transmitters/adv7513.html http://www.analog.com/en/products/audio-video/hdmidvi-transm...
- Conan_Kudo 8y agoWoohoo! Congratulations SiFive! Now we actually _do_ have an open platform!
- dtx1 8y agoThis ist great i Wish i could afford one of their boards
- fithisux 8y agoCongratulations.
- amelius 8y agoIs this the next Raspberry Pi? And does it have real-time support?
- detaro 8y ago> Is this the next Raspberry Pi? It's a 999$ development board, so no. Hopefully RISC-V based hardware will get to mass production at some point, but that's in the future.
- sitkack 8y ago> Is this the next Raspberry Pi? http://www.lowrisc.org/ http://www.lowrisc.org/ https://github.com/lowrisc https://github.com/lowrisc lowRISC was founded by: Robert Mullins - Computer Laboratory, University of Cambridge, co-founder of Raspberry Pi Gavin Ferris - Dreamworks, Radioscape (co-founder), Aspect Capital (former CIO) Alex Bradbury - Computer Laboratory, University of Cambridge and Raspberry Pi
- rwmj 8y agoI'd really love lowRISC to produce a cheap board, unfortunately they've been promising something "next year" for about 3 years now. To be fair they do have a reasonable development environment that you can download and write to a cheap-ish FPGA. They are promising a completely open design. But to achieve that without proprietary IP blocks involves using so-called "minion cores" to handle I/O, where a minion core is a cut down RV32 core hanging off the side of the main RV64 application cores. The minion cores would essentially handle I/O by bitbanging, which sounds OK for slow devices like serial lines and perhaps even fast ethernet, but I'm not sure how well that's going to work for SATA, gigabit ethernet or DDR4 RAM.
- sitkack 8y agoYeah it is a hard problem. But given a small amount of FPGA fabric to be used by each minion core, they could probably achieve agnostic IO. Both Green Arrays [1] and Xmos [2] have a similar arch when it comes to IO. [1] http://www.greenarraychips.com/home/products/index.html http://www.greenarraychips.com/home/products/index.html [2] http://www.xmos.com/ http://www.xmos.com/