19 ms·
Transparent ceramics made with aluminum
- deleted 9y ago[deleted]
- John_KZ 9y agoSaying this is transparent Aluminum is the same as saying Glass is transparent Silicon. It's not, it's just a ceramic.
- pwg 9y agoThe title is a reference to a line in the movie "Star Trek IV: The Voyage Home" where Scotty trades the formula for "transparent aluminum" (from the future) in a barter transaction for plexiglass sheets (in the present) that the cast need to achieve their goal in the movie. https://en.wikipedia.org/wiki/Star_Trek_IV:_The_Voyage_Home https://en.wikipedia.org/wiki/Star_Trek_IV:_The_Voyage_Home https://en.wikipedia.org/wiki/Transparent_aluminum#Transparent_aluminum https://en.wikipedia.org/wiki/Transparent_aluminum#Transpare...
- dvh 9y agoMetal will never be transparent. Metal means metal bonds which means free electrons. Free electrons are opaque to visible light.
- tedsanders 9y agoJust to add on for others reading your comment: Although metals are opaque, conductors can still be transparent. A few techniques: - Very thin layers (like graphene) such that absorption is on the order of a percent - Narrow bandwidth materials that are opaque to infrared but transparent to visible - Bad metals and non-band conductors that have correlated electron hopping from site to site Transparent conductors like ITO are critical materials for displays and solar cells, since light needs to enter/exit one side of the device.
- ajuc 9y agoSee this experiment for a real transparent metal. Admitedly, the conditions are kinda extreme :) https://www.youtube.com/watch?v=BIGMfai_ICg https://www.youtube.com/watch?v=BIGMfai_ICg Don't mind the intro, the interesting part starts at around 2:00
- pjc50 9y agoI'd never realised the two were connected. What's a good learning reference for bandgap physics? It's something I've never quite understood properly.
- castle-bravo 9y agoYou don't need bandgaps to understand why conductors (other than thin films of ITO) don't transmit light. You derive it from Maxwell's equations and the fact that in a conductor, current density = conductivity * electric field. Griffiths' Introduction to Electrodynamics is the standard undergraduate textbook on electromagnetism, and explains this reasonably well. For bandgaps, Ashcroft and Mermin's Introduction to Solid State Physics is what I'm reading from right now, but you don't need it to understand why metals (conductors) don't transmit light.
- Confusion 9y agoAshcroft and Mermin is only an 'introduction' in the graduate student sense of 'introduction'. I don't think you can make sense of it without previous grounding in both quantum mechanics and solid state physics.
- castle-bravo 9y agoWell, he did ask about band gaps. Is there a way to understand band gaps without quantum mechanics? I think you only need a little Fourier analysis to get the basics of band gaps. Anyway, that text and along with Kittel's are the references for an undergraduate solid state course that I'm taking. No prior exposure to solid state physics for me and only introductory quantum mechanics (first half of Griffiths' QM); I find the text totally approachable.
- silman 9y agoSemiconductor Device Fundamentals by Robert F. Pierret was my go-to for undergraduate text. The diagrams speak a thousand words and Pierret is a funny dude. Builds everything up from basic quantum. Don't mistake it with his graduate text, Advanced Semiconductor Fundamentals, though. That's also a great text, but very short and focuses almost exclusively on the quantum aspect without getting too much into the higher level meat of putting it together to form devices. For a comprehensive guide, though, Physics of Semiconductor Devices by Simon M. Sze was my reference bible. It's big and bulky, very heavy on the first principles math and physics, and has everything from quantum to devices and variants on devices.
- dbsvsv 9y agoI don't think in quite understand. You mean they don't let photons to pass through? In which case do electrons in orbit? Or nuclei for example? Or does this need advanced physics knowledge?
- tim333 9y agoRoughly light is electromagnetic radiation and puts force on electrons it comes in contact with. If the electrons are fixed in a non conductor they don't move much and so don't absorb the energy. If they can move as in most metals the force accelerates them and they absorb energy from the radiation, stoping of reducing it.
- dbsvsv 9y agoMy physics is only high school level so as I see, in the case of fixed - does the photon not get scattered/reflected or does it pass through the electron? And why no orbital transition?
- ger_in_no 9y agoReflection on the surface of polished metals occurs because of the collective movement of electrons at the surface, caused by the incoming photons. Light of most wavelengths, especially low-energetic infrared doesn't have enough energy to cause orbital transitions in most elements.
- agumonkey 9y agoWhat about partial ? or only to some wavelengths ?
- mannykannot 9y agoX-rays penetrate metal to some extent, though they also scatter off the atoms. Radiography of high value/risk metal components (such as the stressed parts of gas turbine engines) is a mainstream non-destructive testing technique.
- 9y ago
- jacquesm 9y agoIf the film is thin enough metal is transparent. See for instance 50/50 mirrors and gold plated windows. Of course you can now argue that if the photons hit the metal they will not pass through, but that's not how it works: the photons will excite an electron to a higher orbit and it may drop back to a lower orbit on the other side of the film making the metal appear transparent or it may reflect. edit: saiya-jin I can't reply to your comment but yes, the direction is preserved. The same happens with a mirror, the photons ejected will be ejected at the correct angle even though the photoelectric effect has absorbed the photons. That's why metals reflect the way they do! https://www.scientificamerican.com/article/how-do-mirrors-reflect-ph/ https://www.scientificamerican.com/article/how-do-mirrors-re... The small fraction of photons that is absorbed will heat up the mirror.
- saiya-jin 9y agothat doesn't make sense - if that would be the case, the back-emitted photon would have a random vector, not pertaining the same one as original one (thus preserving the picture beyond the sheet of metal). you are stating somehow the direction of photon is preserved when absorbed by electron - absurd idea even for layman physics (not claiming I know how this works, but this can't be the way)
- archgoon 9y ago> you are stating somehow the direction of photon is preserved when absorbed by electron Well, that is how lasers work :) https://en.wikipedia.org/wiki/Stimulated_emission https://en.wikipedia.org/wiki/Stimulated_emission
- didgeoridoo 9y agoI barely understand even layman-level physics, but it would seem to me that this “absurd” idea is just a natural implication of the conservation of momentum? edit: to all the downvoters of saiya-jin — let the one who has never defended their incorrect intuitions in physics cast the first downvote!
- 9y ago
- wolfi1 9y agoI'm not so sure about that, ever hard of plasmonics?
- Lramseyer 9y agoThis definitely looks like something that has the potential to be really useful, and gives the example of replacing gorilla glass. While I get that this is a very tough glass, I did not see anything about it's hardness in relation to gorilla glass, as hardness is the property that provides the scratch resistance that is so highly sought after in smartphone screens. Toughness is how much energy a material can absorb, whereas hardness is the resistance to deformation. Think a rubber band vs. glass.
- masklinn 9y agoAccording to wikipedia's AlON page it has a knoop hardness of ~1800 which from my understanding of things (I may have misread sources or be mistaken, I'm not a material scientist or even amateur) looks to be about equivalent to sapphire glass and much higher than gorilla glass (~600). edit: in fact while I skipped the intro it states specifically that AlON has ~85% the hardness of sapphire, which more or less checks out. Suffice to say it has excellent hardness, way beyond gorilla glass. I could find no data on relative permittivity though, and I assume that would be a factor for touchscreens.
- kdumont 9y agoI believe hardness is actually a bad thing in terms of replacing gorilla glass in phones. It increases the likelihood of shattering when dropped, and is the main reason for sapphire not being adopted.
- masklinn 9y ago> It increases the likelihood of shattering when dropped AlON seems significantly tougher than glass as well as being way harder. So it looks to be both more scratch-resistant and more shatter-resistant. > is the main reason for sapphire not being adopted. Do you have sources (actual sources, not Corning fearing for their business) for that?
- kdumont 9y ago
- deleted 9y ago[deleted]
- tim333 9y agotl;dr the substance is probably a ceramic, aluminum oxynitride. Which seems a bit of a cop out like calling regular glass transparent sodium because it contains some. It seems quite cool stuff though.
- Sharlin 9y agoOther examples of "transparent aluminum": ruby and sapphire, both of them varieties of the mineral corundum, or Al2O3.
- no_identd 9y agoSlashdot, 2004: https://slashdot.org/story/04/08/23/1141217/transparent-aluminum-is-here/informative-comments#comments https://slashdot.org/story/04/08/23/1141217/transparent-alum... tl;dr: Transparent alumin_a_, not transparent alumin_um_.
- coldcode 9y agoWhile it isn't a metal its still amazing stuff. Sometimes I wish I had stuck with my PhD in Chemistry which would have been working for someone who made equally wild materials.
- talltimtom 9y agoThe deal is that it isn’t aluminium. Seriusly, what’s with the clickbate headline? If you consider everything that contains aluminium atoms in the structure to be actual aluminium, then Saffire is also transparent aluminium. The authors are diliberatly misleading their readers in order to cincrease interest. That’s a shitty thing to do in science even if do have a cool materiale on It’s own merits.
- beeforpork 9y agoAt last, the whales can be saved!
- a_t 9y agoThe mental imagery of denting, bending and crushing a transparent glass-like material and having it react the same way aluminium would is immensely satisfying for some reason
- jackhack 9y agoAm I the only one to recoil at the thought of someone chewing transparent aluminum foil? The potential is tremendous in aviation. Imagine transparent aircraft skins -- the superstructure and internals (fuel tanks, hydraulics, etc.) could be inspected without disassembly (which itself adds stress to the structure). Though I'm not sure passengers would take kindly to aircraft with transparent skins. Sometimes it's best that things are hidden under a bonnet.
- lainga 9y agoYou could wrap the cabin interior with OLED panels that are normally active and opaque during flight. Then, when you're on a longhaul and it's time to wake the passengers up - turn them off in midair. Good morning!
- jackhack 9y agoBrilliant. If the sudden increase in luminosity didn't wake you, the screams of fellow passengers looking through the invisible floor at the ground/Ocean 30,000 feet below would surely do the trick!
- pvarangot 9y agoYup, but it won't happen with "transparent aluminum", it behaves more like a ceramic does, so don't expect to indulge your bending and denting urges on it.
- jboy55 9y agoOn a completely separate note, what was the deal with the need for transparent aluminum in Star Trek IV? Looking at the footage, they easily could have made the tank bigger if they just used all of the space available and didn't need to be able to "see" them from outside their tank. All they would have needed the aluminum for is to keep water out of where water shouldn't go and regular aluminum (or other material) would have worked just as well.
- melling 9y agohttps://www.reddit.com/r/startrek/comments/3luo7c/in_star_trek_iv_why_did_scotty_have_to_invent/?sort=confidence https://www.reddit.com/r/startrek/comments/3luo7c/in_star_tr...
- JoeAltmaier 9y agoMaybe its stronger than regular
- s0rce 9y agoAluminum corrodes a bit in sea water although it didn't need to last that long.
- mohaine 9y agoI don't think they used transparent aluminum in Star Trek IV. I thought they paid for whatever they used (plexiglass?) with the recipe for transparent aluminum. Although it could just be that I'm forgiving the poor writing.
- ASalazarMX 9y agoThis. They didn't have money, so they bartered with information.
- emaginniss 9y agoWouldn't that mean that nobody ever invented it?
- 9y ago
- kaennar 9y agoDoes the fact that there is aluminum inside of the ceramic mean that it has a higher conductance? I couldn't find a reference online (there seems to be a few papers over the conductance of two very thin plates of AL203, but no characterization)
- rpledge 9y agoI think transparent aluminum foil would be awesome - I could tell if my potatoes are cooked on the BBQ without opening the packet.
- antibland 9y agoJerry Seinfeld's new material has become super arcane.
- georgeecollins 9y agoI believe the first Apple Newton had transparent aluminium for the screen. I can't find confirmation of that but I remember going to a sales training session for it (long story) and they told people to say the screen was transparent aluminium, like they talked about in one of Star Trek movies.
- equalunique 9y agoThis is about the same material which transparent circuit boards are fabricated with: http://www.dk-ceramics.com/transparent-pcb/ http://www.dk-ceramics.com/transparent-pcb/
- deleted 9y ago[deleted]
- Tomminn 9y agoSynthetic sapphire is a trivial example of a transparent ceramic made with aluminium. Its formula is something very close to Al_2 O_3.
- kristianp 9y agoThis isn't new, I've read articles on AlON before. Synthetic Sapphire is more interesting in that its use is growing quickly due to demand for LED and laser substrates. Large single crystals are grown and sliced into wafers: https://en.wikipedia.org/wiki/Kyropoulos_process https://en.wikipedia.org/wiki/Kyropoulos_process New producers of the High purity Alumina (HPA) needed to produce sapphire are coming online, perhaps prices will come down enough that phone screens are an application, but I suspect that this is marketing speculation from the HPA makers to attract investors. For example this presentation from a HPA company speculated in 2015 that the iphone 7 would use a sapphire screen, which turned out to be wrong: https://www.altechchemicals.com/sites/altechchemicals.com/files/asx-announcements/6738553.pdf https://www.altechchemicals.com/sites/altechchemicals.com/fi...