4 ms·

Handgun manufacturers are strictly controlled by the state: you'll need a licence at the very least. If you produced handguns in the garage and one accidentally

Handgun manufacturers are strictly controlled by the state: you'll need a licence at the very least. If you produced handguns in the garage and one accidentally got out, you probably wouldn't be so surprised to see the FBI at your doorstep.

caf 10y ago
Right, so it's more like if someone buys an axe and uses it to rob a liquor store.
- probably_wrong 10y ago
  I have to disagree. An axe is a multipurpose tool, and I think we agree that its main purpose is chopping wood (and/or wild wood, also known as trees), not robbing liquor stores. The question here would be: what was the tools' main purpose? Is it closer to a gun, which are mainly designed to make living things less alive[1], or closer to an axe, which people use all the time in law-abiding ways? Because the first one has tons of restrictions (and penalties) that the second one doesn't. Of course he'll say "I manufactured and sold tools", the prosecution will say "he manufactured and sold guns", and the courts will decide. While I'm not saying he's definitely guilty, I think the case is nuanced enough to warrant a trial. [1] Yes, I know most gun owners go to shooting ranges instead of robbing liquor stores. That doesn't change what guns were designed for.
  - willvarfar 10y ago
    RATs are also commonly used for IT support and law enforcement.
    - mindcrime 10y ago
      RATs are also commonly used for IT support and law enforcement. That's a damn good point. I bet if his defense team looked hard enough, they could find an RFP/RFQ out there somewhere, where the FBI themselves were seeking to purchase something like NanoCore. Hell, I'd go one further and suggest that in discovery they ask the FBI for a list of any RAT tools they use, including NanoCore! Proving that the FBI themselves are a customer for tools like (and possibly including) NanoCore should be enough for any half-intelligent judge to throw the case out without further discussion.
  - caf 10y ago
    The point I was responding to was relying on the status of firearms as items whose manufacture is already severely restricted by law; on the other hand, as with axes, you don't need a license to make software.
- ryanlol 10y ago
  Buys an axe from the liquor store robbing section of the liquor store robbery forum, and then proceeds to rob a liquor store with it?
- jerf 10y ago
  I call metaphor fight. We don't need a metaphor to understand this news story. A guy made a convenient remote access program. He released it into a lightweight "hacker" forum. He tried to prevent people from using it in ways he didn't like which includes criminal ways. The FBI wants to nail him more because they can reach him than because they truly believe he did anything wrong. There are grounds for debate depending on how you weight the facts we've been given, to say nothing of facts we don't have. Etc. These metaphors are not accomplishing anything.
rtkwe 10y ago
You actually can manufacture guns in your own home for your own use completely legally in the US. Just for your own use though you can't ever sell or gift them. There's a whole market that sells 80% complete billets with most of the more difficult parts complete such that all someone needs is a drill press to complete the firearm.
- metasean 10y ago
  What happens to the weapon when the maker/owner passes away?
  - rtkwe 10y ago
    That I'm not entirely sure on and a cursory search doesn't bring up anything helpful. It probably gets passed down like other effects? But that's just a guess.
  - wl 10y ago
    Under federal law, they can be bought and sold like any other gun. The issue is that you need a federal firearms manufacturing license to be in the business of manufacturing firearms. The occasional sale of homemade firearms you no longer want is legal as long as it's infrequent and you're not manufacturing the weapons to make money.
- Neliquat 10y ago
  You actually can transfer them, but not for profit, or with any regularity. It cannot be a business.
- fuzzybeard 10y ago
  What you're referring to are called "80% lowers" and they're the part of an AR-15 rifle that contain the serial number. AR-15s come in a lot of parts, so the "lower" is considered the actual gun that has a serial number and requires a license. So manufacturers are selling machined lowers that are 80% complete, considering this as just a piece of metal, not a gun. The ATF has already raided at least one maker of these parts and taken their customer list. Personally I think it's a grey area. At what point do you go from "it's a bunch of metal, screws, and springs" to "firearm". It's the sand hill paradox. And if you want to stay out of jail, stay away from these. All it takes is a zealous DA who decides it's a violation of federal fireams law and suddenly your life is hell.

caf 10y ago

Right, so it's more like if someone buys an axe and uses it to rob a liquor store.

probably_wrong 10y ago
I have to disagree. An axe is a multipurpose tool, and I think we agree that its main purpose is chopping wood (and/or wild wood, also known as trees), not robbing liquor stores. The question here would be: what was the tools' main purpose? Is it closer to a gun, which are mainly designed to make living things less alive[1], or closer to an axe, which people use all the time in law-abiding ways? Because the first one has tons of restrictions (and penalties) that the second one doesn't. Of course he'll say "I manufactured and sold tools", the prosecution will say "he manufactured and sold guns", and the courts will decide. While I'm not saying he's definitely guilty, I think the case is nuanced enough to warrant a trial. [1] Yes, I know most gun owners go to shooting ranges instead of robbing liquor stores. That doesn't change what guns were designed for.
- willvarfar 10y ago
  RATs are also commonly used for IT support and law enforcement.
  - mindcrime 10y ago
    RATs are also commonly used for IT support and law enforcement. That's a damn good point. I bet if his defense team looked hard enough, they could find an RFP/RFQ out there somewhere, where the FBI themselves were seeking to purchase something like NanoCore. Hell, I'd go one further and suggest that in discovery they ask the FBI for a list of any RAT tools they use, including NanoCore! Proving that the FBI themselves are a customer for tools like (and possibly including) NanoCore should be enough for any half-intelligent judge to throw the case out without further discussion.
- caf 10y ago
  The point I was responding to was relying on the status of firearms as items whose manufacture is already severely restricted by law; on the other hand, as with axes, you don't need a license to make software.
ryanlol 10y ago
Buys an axe from the liquor store robbing section of the liquor store robbery forum, and then proceeds to rob a liquor store with it?
jerf 10y ago
I call metaphor fight. We don't need a metaphor to understand this news story. A guy made a convenient remote access program. He released it into a lightweight "hacker" forum. He tried to prevent people from using it in ways he didn't like which includes criminal ways. The FBI wants to nail him more because they can reach him than because they truly believe he did anything wrong. There are grounds for debate depending on how you weight the facts we've been given, to say nothing of facts we don't have. Etc. These metaphors are not accomplishing anything.

rtkwe 10y ago

You actually can manufacture guns in your own home for your own use completely legally in the US. Just for your own use though you can't ever sell or gift them. There's a whole market that sells 80% complete billets with most of the more difficult parts complete such that all someone needs is a drill press to complete the firearm.

metasean 10y ago
What happens to the weapon when the maker/owner passes away?
- rtkwe 10y ago
  That I'm not entirely sure on and a cursory search doesn't bring up anything helpful. It probably gets passed down like other effects? But that's just a guess.
- wl 10y ago
  Under federal law, they can be bought and sold like any other gun. The issue is that you need a federal firearms manufacturing license to be in the business of manufacturing firearms. The occasional sale of homemade firearms you no longer want is legal as long as it's infrequent and you're not manufacturing the weapons to make money.
Neliquat 10y ago
You actually can transfer them, but not for profit, or with any regularity. It cannot be a business.
fuzzybeard 10y ago
What you're referring to are called "80% lowers" and they're the part of an AR-15 rifle that contain the serial number. AR-15s come in a lot of parts, so the "lower" is considered the actual gun that has a serial number and requires a license. So manufacturers are selling machined lowers that are 80% complete, considering this as just a piece of metal, not a gun. The ATF has already raided at least one maker of these parts and taken their customer list. Personally I think it's a grey area. At what point do you go from "it's a bunch of metal, screws, and springs" to "firearm". It's the sand hill paradox. And if you want to stay out of jail, stay away from these. All it takes is a zealous DA who decides it's a violation of federal fireams law and suddenly your life is hell.