36 ms·
Seagate will bring a 16TB hard drive to market within 18 months
- velodrome 10y agoToo bad the $/TB isn't dropping as much as before. $30-40 / TB seems to be the floor... http://www.theregister.co.uk/2014/11/10/kryders_law_of_ever_cheaper_storage_disproven/ http://www.theregister.co.uk/2014/11/10/kryders_law_of_ever_...
- js2 10y agoI paid $1000 for my first HD. It was 40 MB.
- deleted 10y ago[deleted]
- velodrome 10y agoI had one of a similar capacity. It weighed as much as a brick (perhaps more). https://en.wikipedia.org/wiki/Hard_disk_drive#/media/File:5.25_inch_MFM_hard_disk_drive.JPG https://en.wikipedia.org/wiki/Hard_disk_drive#/media/File:5....
- deleted 10y ago[deleted]
- DougWebb 10y agoAbout 15 years ago, the company I worked for paid $1,000,000 for a 1TB disk array. Today I have several times that capacity laying around my apartment; I haven't even bothered to hook some of it up.
- mistermann 10y agoSame, I have 11 TB from boxing day sales sitting on a shelf.
- evgen 10y agoAs someone who installed a lot of NetApp filers back in the day that had 1T of storage each I would also point out that it took up the whole rack :) Yeah, back when the move from 9G to 18G drives in the array was a big deal...
- peter303 10y agoMy lab paid 35,000 for PDP 10mB disk in 1976. It was the size of a washing machine. But it did allow us to increase our research.
- DrScump 10y agoI paid something like $360 for a full-height 5.25" 30MB Seagate for my first HD (to add to my dual-floppy Zenith AT).
- ue_ 10y agoI wonder if this will have such high failure rates as other high-capacity hard drives. It's less cost effective to buy many smaller HDDs, but it's probably better for long-term data retention. I wish there were a cheap and easy way to buy magnetic storage and the associated drive. I have no idea where to start, as I just want to back things up on tape.
- gcp 10y agoIt's less cost effective to buy many smaller HDDs, but it's probably better for long-term data retention How so? Is the MTBF for a size 2*x drive more than twice as high as that of a size x drive?
- alex_anglin 10y agoRAID?
- CyberDildonics 10y agoRAID what? You trade redundancy for less space.
- problems 10y agoIf your concern is space, use RAID5 or RAID6, which offer single or dual disk recovery. There's been some concern raised, particularly about errors on RAID5 recovery - the large disk sizes may make a failure during recovery more likely, but in my experience drives more often than not fail completely and totally, all at once or close to it. If you're extra worried about recovery though, my friend has a good setup where he keeps 1 TB RAID1 across all of his 4x8TB drives for personal files and uses the rest in RAID5 for media storage.
- snuxoll 10y agoWhen you are looking at the potential of losing TB's of data it's money well spent. I ponied up some extra money to set my FreeNAS box at home up with a pool of mirrored devices because I care about my data - if you don't then feel free to save the money. (One of these days I'm going to pony up for a LTO drive to do a monthly backup and drop it in a safe deposit box, one ~$115 LTO-7 tape is enough to backup my entire storage array).
- 0xcde4c3db 10y agoWill this be SMR? That seems like an important variable.
- IgorPartola 10y agoRandom: I had a professor in college who had a bunch of industry experience. He said once that working on computer equipment was really annoying because of Moore's law. You bust your ass for a year-year and a half, make the computer literally twice as fast, and in the end the execs just sort of say "well of course you did. Moore's law said you would." Not sure if true but definitely a little funny.
- 13of40 10y agoThe corollary to that is that in (a lot of) software your application's performance can plummet over time and nobody notices, because it appears to be holding steady. "But AcmePro Enterprise Plus is faster than it's ever been," you counter. Try running it on a 486DX4 with 32 megs of RAM like you did with version one. We'll wait.
- gpderetta 10y agoAKA Gate's Law
- discodave 10y ago* Gates' law
- chimeracoder 10y ago> * Gates' law Actually, it's Gates's law. The "s'" construct is for plural possessives (e.g. "the three organizers' books") In most style guides, when the name ends in "s", you still use an extra "'s" - the exception is for names in antiquity, when you don't (e.g. "Achilles' Heel"). Though this is becoming less prevalent on the Internet.
- CardenB 10y agoI was under the impression that both "s'" and "s's" were correct in this context with the caveat that "s'" could also be used for plural possessives.
- shmerl 10y agoWhen will prices of SSD catch up to rotational disks?
- zoren 10y agoWill they?
- al_biglan 10y agocaveat: I'm in the storage/file system industry. Everyone in the industry is looking at this. There is a great graph out there by one drive manufacturer that overlays $/GB for different HDDs and SSD technologies. For example, 15K and 10K RPM drives no longer are cost effective to produce. You are better going with SSDs. 7.2K will be next and some of the "lower end SSDs" are encroaching on that. 5.4K will likely live a longer time and if you keep "HDD as archive" you might project these drives to be alive in the foreseeable future (then factor in SMR, HAMR, then SMR plus HAMR.... and $/GB gets pretty cheap). After all, if you aren't keeping 100% of your data "in flight" keeping it at rest on a cheaper medium seems a sane thing. (Tape backup systems are _still_ for sale and in use...) Another interesting back of the envelope to do is look at Fab capacity for SSDs and compare it against HDD capacity sold. How much Fab capacity has to be available to serve the total storage demand? If there is a shortage of Fab plants, then a price premium for SSDs is easier to maintain (and may benefit some flash manufacturers in the short term to keep the price premium in place). Looking at the economics of building enough Fab capacity gets interesting quick.
- mtanski 10y agoI've actually been wondering why is not possible to make lower-end desktop SSD drives of capacity 1TB (or more) that are "better" then spinning drives. I have a samsung 950 pro NVMe drive in my development workstation and I can't statute it without a synthetic workload. There are times I need that for work, most times it's over kill. For example 1TB SSD drive that can do like 300MB/s sustained transfer with 3000 to 5000 iops. So a speed that's magnitude or magnitude and a half less then current consumer SSD drives. But still a magnitude faster then spinning disk. I'm confident that would be more then enough to make most desktop environment work feel just as snappy as a SSD or within an acceptable factional difference. If you could make this at $100 to $120 price point drives. That's like 1/2 the cost of a low end desktop 1TB SSD drive (like the Toshiba/OCZ) You'd have a hot seller in peoples gaming rigs, mid-range laptops etc. Obviously I'm missing something here. Why is not happening? Does producing lower end flash (slower) not saving you any money?
- xfactor973 10y agoWow HDD's really are the new tape drives
- salesguy222 10y agoit's a shame that HDDs fail/lose integrity so much more quickly than tape cartridges used in an equivalent manner :( but if you put them on a shelf, then the life is roughly the same :D
- Alupis 10y ago> but if you put them on a shelf, then the life is roughly the same :D Careful, that's not always the case. Anecdotally, I lost a few TB's of data recently after assuming my drives sitting on the shelf (inside anti-static bags) would be fine after only a couple of years. Plugging each drive in prompted the Windows popup asking if I wanted to initialize the drives! Total data loss on all 4 drives after only a couple of years on the shelf. It wasn't a big loss to me, because I couldn't even remember what data was on the drives... but I wouldn't rely on this for business data. Tapes still have their purpose.
- salesguy222 10y agoInteresting story, was it a hardware failure that caused the loss, or was it Windows deciding to wipe them? Apologies if I'm missing something obvious disks are also much more succeptible to vibrations than tape. the only thing is that maintaining tape expertise to pull data back into modern systems is a bit difficult
- Alupis 10y ago> was it a hardware failure that caused the loss, or was it Windows deciding to wipe them? No, mechanically they all work fine... just no data on them anymore. I believe the partition table became corrupted, so Windows just thinks its a wiped/new drive and asks if you want to initialize it. In my case, I said "No", and will attempt data recovery sometime when I'm bored (TestDisk[1] might just be able to restore the partition table, allowing me to extract data from the drives then perform a real wipe, otherwise a more serious data recovery tool like StellarPhoenix, GetDataBackNFTS or similar will be required). > disks are also much more succeptible to vibrations than tape They sure are. There are other factors too, such as radiation (from solar flares and more), temperature, and more that can cause "bit rot", even for a drive not in use. > the only thing is that maintaining tape expertise to pull data back into modern systems is a bit difficult Usually not so much. Whatever utility you used to create the backup tape almost assuredly has the ability to restore data from the tape. Some even are full disk images written to tape, which allows you to put a tape drive into a new system and restore the entire thing... while others only backup data to tape, etc. [1] http://www.cgsecurity.org/wiki/TestDisk http://www.cgsecurity.org/wiki/TestDisk
- oblio 10y agoI'm kind of hoping that SSD capacities go up or prices go down. Especially for laptops, in 2017 it feels like the baseline for the storage capacity should be 1TB. Yet here we are, struggling with 256GB, like desktops from 2007. And don't get me started on RAM, where 8gb should be the norm even for cheap laptops...
- zxcdw 10y ago> 8gb should be the norm even for cheap laptops... Why? For example, why now, why not two years ago, or in two years time?
- isostatic 10y agoI haven't paid much attention to specs recently, but looking at the Thinkpad T series which I'm typing this on (a 2010 one with a decent keyboard) The standard for a 2017 T460s is 8G, maxed out at 20G The standard for a 2010 T410s was 2G, maxed out at 8G The standard for a 2005 T43 was 512M, maxed out at 2G The standard for a 2000 T21 was 128MB, maxed out at 512M. So a 4 fold increase in 5 years seems a historic trend for laptop memory sizes, but that would mean 8G as standard in 2015. The maxout level has tailed off recently too - I'd expect a max out at 32G now, not 20G. Presumably the demand appears to be dropping, that said my uptime is only 5 hours, and memory use isn't great Mem: 7779 5269 277 713 2232 1437 Browsers use tons of memory, at some point I'll have to buy the bullet and downgrade the keyboard, looks like 20G is the way to go.
- detaro 10y agoThe non-s versions of the T-series can do 32 GB, the 20GB limit on some Lenovos is due to them only having one memory slot and 4 GB soldered in. On the other hand, even some 2010 laptops support 32GB max, the most on current ones is as far as I know 64GB, so yes, the max curves certainly have flattened, but I think reasonably so.
- bluedino 10y agoYou can put a 16GB chip in that 460 to max it out for $150. In the days of DDR2 it cost $800 to max out a laptop with 8GB
- Jedd 10y agoIt's not an original thought, but for my home / office environments (ie. non-data center) where most machines have at least one 5.25" bay, I'd be really happy with a larger, slower, higher density, disk. I appreciate most vendors are selling to the commercial market which eschews this old format, but it's still hard to buy a tower case that doesn't include at least one 5.25 inch bay that never gets populated. (Nota bene - I'm referring to half-height 5.25". I've long since dumped my impressive stash of 2GB full-height 5.25" SCSI disks.)
- aexaey 10y agoBiggest problem with large spindle is that noise and heat dissipation (both mostly due to air friction) are roughly proportional to the square of linear speed of the outer part of the platter, and bigger the platter, more linear speed you'll get at the same angular speed. On the other hand, you want to crank up angular speed to get any decent random IO operation/second value. Last 5.25" HDD I've seen was Quantum Bigfoot CY [1], (which happened to be half-height FWIW), and this thing was pretty noisy even at 3,600 RPM. Dividing this by 60 (seconds in one minute) gives you theoretical maximum of only 60 random IOPS. Not exactly stellar, and as far as I remember, that was substantially lower in practice. [1] https://en.wikipedia.org/wiki/Quantum_Bigfoot https://en.wikipedia.org/wiki/Quantum_Bigfoot
- SoapSeller 10y agoI can imagine a 5.25" drive populated with a couple(3-5) sets of ~1.8" platters, you could also have internal raid speeding things up and protecting from single set failures.
- givinguflac 10y agoWhy would you ever do that vs having separate disks you RAID if desired? That sounds like you'll inevitably end up with at least one failed disk in your 5.25" array, and then what do you do? If you can open it to replace the part, what is the functional benefit over separate disks to begin with?
- 10y ago
- Keyframe 10y agoI just found out today that Seagate bought Dot Hill.
- fencepost 10y agoThese helium-filled drives always make me twitchy and worried. I know they've come up with new seals to keep the second-smallest atom from leaking out, but I'd really like to know what the lifespan of these drives will really be. That said, in the datacenter environments where they're pushing these hopefully the drives will be better monitored and replaced regularly as opposed to the consumer and small business market where there are still people who will give up their XP when you pry it from their cold virus-infested 15-year old HDs.
- effie 10y agoFun fact: the helium atom is actually much smaller than the hydrogen atom. See https://www.webelements.com/helium/atom_sizes.html https://www.webelements.com/helium/atom_sizes.html
- fencepost 10y agoNot clear where that's coming from, that site lists the bond length for HeHe as 300pm but for HH it's around 75 which would make Hydrogen ~1/4 the size of helium. On the scale of individual atoms I don't remember enough about my chemistry and physics courses to recall whether there's supposed to be much physical difference between the "size" of the region where the first 2 electrons are between different atoms, nor do I know if that's being conceptualized as orbits, shells, abstract concepts of energy levels of something even weirder these days.
- effie 10y agoI think the helium in the harddrive consists mostly of single independently moving atoms, not molecules of two. Those have very small binding energy, much smaller compared to kT.