vhaudiquet

4 ms·

1.
by vhaudiquet 17d ago
Yes, this was definetely a side quest, but postmarketOS indeed is a real Linux distribution that is perfectly usable! I just want to experiment with this tablet, and with U-Boot providing an EFI environment now adapted, I (or anyone) should
2.
by vhaudiquet 17d ago
In your case, it seems you had an automated (semi-automated, maybe?) feedback loop. In my case, I was the feedback loop :D which ended up being the bottleneck for some parts...
3.
Running Ubuntu on the Lenovo IdeaPad Duet(vhaudiquet.fr)
4 points by vhaudiquet 20d ago|0 comments
4.
by vhaudiquet 4mo ago
The E5 2620-v4 only supports DDR4.
5.
by vhaudiquet 9mo ago
Certainly! The original [link]( https://makerworld.com/en/models/488435-12-trays-hdd-enclosu... ) already has information. On the back I mounted SATA connectors (SATA-to-SATA, with power). I have a 1U PSU in the enc
6.
by vhaudiquet 9mo ago
Yes, I would have loved to use a 'better' material, but my printer is not enclosed and I'm not sure it can print CF filaments (I think I would need to change the hot end at least). But soon I will hopefully get my hands on a
7.
by vhaudiquet 9mo ago
Thanks for noticing that! I'll try to fix right away (of course it is not happening on my local dev environment...)
8.
by vhaudiquet 9mo ago
Fortunately, the R740 is around 230W, and the switches, routers, and everything around seems to only take 40W. Which means I'm below 300W, and I guess we have cheaper electricity in France as I don't pay as much as you (I think le
9.
by vhaudiquet 9mo ago
I used PETG to print it, which should support the heat without problems. I also added two fans behind, so that the disks and enclosure stays cold. For now, I only have 4 drives in it, and it does not move at all and holds perfectly fine.
10.
A History of My Homelab(vhaudiquet.fr)
23 points by vhaudiquet 9mo ago|17 comments