Y
HN Search
Hacker News Search
new
|
comments
|
top
|
jobs
pietern
searching PlanetScale…
1.
▲
2.
▲
3.
▲
4.
▲
5.
▲
6.
▲
4 ms
·
1.
▲
by
pietern
8y ago
That is awesome to hear! Building this has been a fun side project and I'm happy to hear it sparked interest for you as well.
2.
▲
by
pietern
8y ago
Yes, there are multiple interfaces. This is a nice interactive one: http://rammb-slider.cira.colostate.edu/?sat=goes-16 . There is also an S3 bucket where you can find all data as soon as it is available: https://
3.
▲
by
pietern
8y ago
Great, if you end up building one, keep us updated (here or on Twitter). 1) Yes, this is DCS (Data Collection System) data. It's a very low bandwidth signal (300 or 1200 baud) that ground stations uplink to GOES on UHF. I found there a
4.
▲
by
pietern
8y ago
Depends on the mode the satellite is operating in. Typically: a full disk image every 15 minutes, the continental USA every 5 minutes, and two selected "mesoscale" regions (they will move around based on interesting events) every
5.
▲
by
pietern
8y ago
Hi everybody, cool to see this submitted on HN. I'm around for questions so ask away. Also beware that the guide is a little out of date: 1) the listed antenna is no longer available, but there are comparable ones for comparable or low
6.
▲
by
pietern
8y ago
It's not. The SUVI data is not broadcast on the HRIT feed, only on the GRB (GOES ReBroadcast) feed. Receiving GRB requires more effort: minimum 10ft dish, dual circular polarized feed, DVB-S2 demodulator, and different software. Never
7.
▲
by
pietern
9y ago
Re: your second point, it is strictly synchronous, though since there are 8 GPUs per process (thus have 1 process per machine) the gradient reduction is done in 3 phases. First they are reduced within the process, then across processes/
8.
▲
by
pietern
9y ago
Hi Salvatore! :D And there's even a tiny Redis dependency (optional though) in the code to generate these results. In particular the collective communication library needs a rendezvous phase where all nodes connect to their peers. Usin
9.
▲
by
pietern
9y ago
Interconnect between the servers is 50 Gbit Ethernet (see section 4 of the paper).
10.
▲
by
pietern
16y ago
Or set the OPTIMIZATION environment variable for even more control ;-)
11.
▲
by
pietern
16y ago
It's called optimistic for a reason. You assume there is low contention and configure your client to have random back off.
12.
▲
by
pietern
16y ago
Sorry about that, just deployed a fix to make it less likely for session identifiers to collide. Shouldn't happen again.
13.
▲
by
pietern
16y ago
All keys are namespaced to a unique session identifier, so parallel sessions are isolated. You can check out the code for the interactive stuff here: https://github.com/antirez/redis-io/tree/master/lib/interact...