circuitvalley

4 ms·

1.
by circuitvalley 4y ago
There are only few options, 1. Use USB controller Chip that support 10Gbit or more. 2. Use 10Bit or more ethernet, Optical or copper. 3. Use PCIe 4. Use onboard storage. 5. Use HDMI or something custom and have another receiver (They are
2.
by circuitvalley 4y ago
They were initially used then for certain reason they were dropped.
3.
by circuitvalley 4y ago
Soldering BGA is the easiest part, You just need good hotair. While soldering connectors are hardest. They melt , do not self alging and many other problems
4.
by circuitvalley 4y ago
720p@240FPS would be little hard because of limitations on the USB controller side. because of 100Mhz and 32bit limit you have possibility of only 400Mbytepersecnd and with few % overhead you have may be get around 200 FPS of color UYV imag
5.
by circuitvalley 4y ago
FPGA ISP i am using with this project is improved version of ISP that i made for lattice machxo3 FPGA , those FPGA like most FPGAs do not have any MIPI hard PHY. If you want to port this ISP to Xilinx you would not find hard PHY in many FPG
6.
by circuitvalley 4y ago
I am the Developer behind this camera. Happy to answer any questions you have regard this project.
7.
by circuitvalley 4y ago
I am the Developer behind this camera. If you buy from mouser and try to make just 1 then Only part would be around 200 USD. If you make hundred in bath of new improved hardware, You can look at BOM cost under 100 USD. I am working on new
8.
by circuitvalley 4y ago
I am the Developer behind this camera. Camera as is not very productionable because of manufacturing related issues. There will be Third revision of this camera coming in few months. I am working on absolute new hardware with lots of improv
9.
by circuitvalley 4y ago
I am the Developer behind this camera. I have assembled cameras the exact way you have described. If you buy from mouser and try to make just 1 then Only part would be around 200 USD.
10.
by circuitvalley 4y ago
Elphel Camera cost a insane amount of money and Reputation of the company after google incidence, I would rather not talk about.
11.
by circuitvalley 4y ago
I am developer behind this camera. Its a second revision of hardware and also second revision or firmware. I have been doing MIPI CSI FPGA stuff from quite sometime. Current state of firmware is stable. Where work need to be done isimage q