11 ms·

Maybe another reason why Apple spawned comparatively few startups might be that some of the areas of expertise for Apple and their employees are harder to do in

Maybe another reason why Apple spawned comparatively few startups might be that some of the areas of expertise for Apple and their employees are harder to do in startup-sized companies; namely hardware engineering and mass manufacturing innovation. Apple does a lot of work in hardware and hardware manufacturing, both areas which are pretty capital-intensive and might not lead themselves as easily to the startup world. Say, you are an Apple engineer working on the Ax chips for the next iPhone and have an idea for something great in CPU design, you cannot exactly rent a scalable 14nm chip fab from AWS to try to build it on your own and sell it market.

Eric_WVGG 11y ago
True, and it’s telling that maybe the biggest break-out startup from Apple was Nest. And for that very reason, I’m surprised that there aren’t more creatively stifled Apple hardware engineers pursuing IoT startups.
derefr 11y ago
> rent out a scalable 14nm chip fab from AWS I was pondering the viability of almost exactly this. Could one invest in a hardware pipeline that efficiently combines e.g. 3D printing with FPGAs to create the consumer-electronics equivalent of Lulu.com's just-in-time small-batch book printing + drop-shipping. Or, in other words: you can do pretty much anything with the sensors in a modern smartphone. All most manufacturers probably need is smartphone boards (with maybe some options of extra sensors) in custom cases with fancy buttons and displays, maybe custom remotes, and a cute little 4-colour double-walled box. That describes everything from Nest to Roku to some drone controllers.
- beambot 11y ago
  You're probably better off using something like Samsung's Artik (https://www.artik.io/ https://www.artik.io/) that is basically cellphone-grade integration using existing high-density components.
- sliverstorm 11y ago
  There's a risk/flaw/gap with that plan. Modern consumer electronics depend on humongous volume discounts- 10x or even 100x- on parts, plus tremendous economies of scale on design & assembly. JIT small-batch assembly seems roughly analogous to other low-volume electronics, which are obscenely expensive. For example, specialty bench equipment like spectrometers can cost as much as a house.. There are many factors at play there, but you can bet one of them is very low volumes. This is why, at least so far, the kind of play you describe is accomplished with large batches of a generalizable platform that can be sold into many different devices.
- tdicola 11y ago
  Wattage tried something similar but just recently shut down: https://medium.com/inside-wattage/well-we-failed-77e795e16ecf https://medium.com/inside-wattage/well-we-failed-77e795e16ec...
- nickpinkston 11y ago
  At Plethora, we're building the mechanical pieces of this - starting with full-auto, on-demand CNC milling as fast as LuLu or similar, then adding more capabilities. Happy to make some free parts for anyone's ideas on here! http://plethora.com http://plethora.com nick@plethora.com
  - Animats 11y ago
    Compare emachineshop.com. They have been doing that for years, and have a site with actual information instead of just pretty pictures.
    - Animats 11y ago
      (sorry about the duplicate - HN had a database timeout.)
  - Animats 11y ago
    Compare emachineshop.com. They have been doing that for years, and have a site with useful information instead of just pretty pictures.
    - nickpinkston 11y ago
      Ha - yea, we're not the first machine shop, but we're doing something really new in regards to: instant pricing/feedback (inside your CAD), speed, and much more to come
gumby 11y ago
> ...harder to do in startup-sized companies; namely hardware engineering and mass manufacturing innovation. Don't forget all the hardware companies you know today were once startups. Yes there's a current fashion to call companies that are basically small businesses "startups", but the term encompasses a far more profound class of enterprise. And Apple itself was founded by an engineer (Woz) who first got his start at a big company, HP, which is celebrated as a hardware startup that grew. I think the article and your comment do get to an important point, which is that Apple is big enough to have solid (and at the moment very successful) processes and infrastructure so that you only get experience in that matrix, and don't have to spend any time learning stuff outside your own area. You can, of course, and plenty of companies have come from Apple alums.
- morgante 11y ago
  > Don't forget all the hardware companies you know today were once startups. Unfortunately the winds of VC have changed a lot since then. Originally, VCs were willing and eager to invest millions in a promising innovation. Now they expect you to demonstrate traction before any large investments—which is infinitely harder with hardware startups.
  - Sir_Substance 11y ago
    Really? I get the strong impression (what with people throwing the word bubble around and making regular comparisons to the dotcom era) that VC's are far less picky today then they were 10 years ago.
    - morgante 11y ago
      The hardware companies you know today weren't founded in the 2000s. The golden age of hardware startups was the 70s/80s.
    - gumby 11y ago
      Well, lets tease this apart. Hardware startups are still being funded. Software startups are still being funded. Life science startups are still being funded. And it's a lot of the same old line VCs who are doing these deals. I'm thinking $15M-$20M first round, with companies need significant funding but get quite large. Then there are a ton of small companies, many of which are really small businesses (just look at the list of companies at https://news.ycombinator.com/item?id=9666013 https://news.ycombinator.com/item?id=9666013), that are getting small amounts of funding ("spray and pray" funds). Are their funders really "VCs" in the classic sense when the amount they invest is =< $100K and they can't participate in future rounds? Although they get a most of the press for "startups" and "VCs", and they are the volume in absolute sense, most of these seem designed to run for a little while and then be aquihired away. So no need to build most of the infrastructure for a sustainable business. In that role, the "VCs" are really more like agents getting a commission on the aquihire. It's the latter that aren't particularly picky. The traditional VCs seem mostly to still look for the same things.
CamperBob2 11y ago
you cannot exactly rent a scalable 14nm chip fab from AWS to try to build it on your own and sell it market. To Amazon's credit, I can imagine Bezos reading your comment, frowning, and muttering, "Why the hell not?"
- seanmcdirmid 11y ago
  Taiwan? I mean, Motorola and even AMD have sold their FABs out to companies who then provide capacity out to the highest bidder. Now they do trail in process, so 14mm might not be available for a couple of years.
  - narrowrail 11y ago
    I thought Motorola spun out their chip division as Freescale, which just merged with NXP (Philips' chip spin off? Did Motorola retain some portion?
- philippnagel 11y ago
  I am obviously not Jeff Bezos but I asked myself the same question. Could such an extreme outsourcing service (not necessarily only fabricating chips) paired with the accessibility of AWS be viable? Does such a company exist?
  - CamperBob2 11y ago
    To some extent, yes, and a few of those companies already exist, with names like Xilinx and Altera. Their FPGA products are available at 22 nm now. But they're not of much use when it comes to selling cheap commodity hardware in volume, of course.
_yosefk 11y ago
Erm... you can "rent" it from TSMC, you could before AWS existed, and in fact some of Apple chips are manufactured by TSMC (http://en.wikipedia.org/wiki/Apple_system_on_a_chip#Apple_A8X http://en.wikipedia.org/wiki/Apple_system_on_a_chip#Apple_A8...) Now "an idea for something great in CPU design" is unlikely to result in a marketable chip these days, but chip startups exist, and some are very small. Adapteva for instance is a 5-people company.
mbell 11y ago
> Apple does a lot of work in hardware and hardware manufacturing, both areas which are pretty capital-intensive and might not lead themselves as easily to the startup world. There is some truth to that but it's not the custom chip manufacturing that drives it. It's not even what I guess I would call 'excellence in material design' that drives it. Really it's a combination of the choice to not cut corners on hardware combined with the scale and market position to support the cost. As an example a lot of has been made in the past about Apple's charges, both laptop and iDevices, they are small, sleek and powerful for their size. There isn't anything special going on there from an electronics perspective, they didn't invent new types of power conversion, they just didn't cut every possible corner to reduce cost and they had the budget to allow custom parts when off the shelf didn't fit. I don't mean custom IC's here I mean custom metal fab, maybe custom caps that are 'normal' other than being shaped a bit differently, etc. Apple has the volume and price point to let them do this when the vast majority of companies don't.

Eric_WVGG 11y ago

True, and it’s telling that maybe the biggest break-out startup from Apple was Nest. And for that very reason, I’m surprised that there aren’t more creatively stifled Apple hardware engineers pursuing IoT startups.

derefr 11y ago

> rent out a scalable 14nm chip fab from AWS I was pondering the viability of almost exactly this. Could one invest in a hardware pipeline that efficiently combines e.g. 3D printing with FPGAs to create the consumer-electronics equivalent of Lulu.com's just-in-time small-batch book printing + drop-shipping. Or, in other words: you can do pretty much anything with the sensors in a modern smartphone. All most manufacturers probably need is smartphone boards (with maybe some options of extra sensors) in custom cases with fancy buttons and displays, maybe custom remotes, and a cute little 4-colour double-walled box. That describes everything from Nest to Roku to some drone controllers.

beambot 11y ago
You're probably better off using something like Samsung's Artik (https://www.artik.io/ https://www.artik.io/) that is basically cellphone-grade integration using existing high-density components.
sliverstorm 11y ago
There's a risk/flaw/gap with that plan. Modern consumer electronics depend on humongous volume discounts- 10x or even 100x- on parts, plus tremendous economies of scale on design & assembly. JIT small-batch assembly seems roughly analogous to other low-volume electronics, which are obscenely expensive. For example, specialty bench equipment like spectrometers can cost as much as a house.. There are many factors at play there, but you can bet one of them is very low volumes. This is why, at least so far, the kind of play you describe is accomplished with large batches of a generalizable platform that can be sold into many different devices.
tdicola 11y ago
Wattage tried something similar but just recently shut down: https://medium.com/inside-wattage/well-we-failed-77e795e16ecf https://medium.com/inside-wattage/well-we-failed-77e795e16ec...
nickpinkston 11y ago
At Plethora, we're building the mechanical pieces of this - starting with full-auto, on-demand CNC milling as fast as LuLu or similar, then adding more capabilities. Happy to make some free parts for anyone's ideas on here! http://plethora.com http://plethora.com nick@plethora.com
- Animats 11y ago
  Compare emachineshop.com. They have been doing that for years, and have a site with actual information instead of just pretty pictures.
  - Animats 11y ago
    (sorry about the duplicate - HN had a database timeout.)
- Animats 11y ago
  Compare emachineshop.com. They have been doing that for years, and have a site with useful information instead of just pretty pictures.
  - nickpinkston 11y ago
    Ha - yea, we're not the first machine shop, but we're doing something really new in regards to: instant pricing/feedback (inside your CAD), speed, and much more to come

gumby 11y ago

> ...harder to do in startup-sized companies; namely hardware engineering and mass manufacturing innovation. Don't forget all the hardware companies you know today were once startups. Yes there's a current fashion to call companies that are basically small businesses "startups", but the term encompasses a far more profound class of enterprise. And Apple itself was founded by an engineer (Woz) who first got his start at a big company, HP, which is celebrated as a hardware startup that grew. I think the article and your comment do get to an important point, which is that Apple is big enough to have solid (and at the moment very successful) processes and infrastructure so that you only get experience in that matrix, and don't have to spend any time learning stuff outside your own area. You can, of course, and plenty of companies have come from Apple alums.

morgante 11y ago
> Don't forget all the hardware companies you know today were once startups. Unfortunately the winds of VC have changed a lot since then. Originally, VCs were willing and eager to invest millions in a promising innovation. Now they expect you to demonstrate traction before any large investments—which is infinitely harder with hardware startups.
- Sir_Substance 11y ago
  Really? I get the strong impression (what with people throwing the word bubble around and making regular comparisons to the dotcom era) that VC's are far less picky today then they were 10 years ago.
  - morgante 11y ago
    The hardware companies you know today weren't founded in the 2000s. The golden age of hardware startups was the 70s/80s.
  - gumby 11y ago
    Well, lets tease this apart. Hardware startups are still being funded. Software startups are still being funded. Life science startups are still being funded. And it's a lot of the same old line VCs who are doing these deals. I'm thinking $15M-$20M first round, with companies need significant funding but get quite large. Then there are a ton of small companies, many of which are really small businesses (just look at the list of companies at https://news.ycombinator.com/item?id=9666013 https://news.ycombinator.com/item?id=9666013), that are getting small amounts of funding ("spray and pray" funds). Are their funders really "VCs" in the classic sense when the amount they invest is =< $100K and they can't participate in future rounds? Although they get a most of the press for "startups" and "VCs", and they are the volume in absolute sense, most of these seem designed to run for a little while and then be aquihired away. So no need to build most of the infrastructure for a sustainable business. In that role, the "VCs" are really more like agents getting a commission on the aquihire. It's the latter that aren't particularly picky. The traditional VCs seem mostly to still look for the same things.

CamperBob2 11y ago

you cannot exactly rent a scalable 14nm chip fab from AWS to try to build it on your own and sell it market. To Amazon's credit, I can imagine Bezos reading your comment, frowning, and muttering, "Why the hell not?"

seanmcdirmid 11y ago
Taiwan? I mean, Motorola and even AMD have sold their FABs out to companies who then provide capacity out to the highest bidder. Now they do trail in process, so 14mm might not be available for a couple of years.
- narrowrail 11y ago
  I thought Motorola spun out their chip division as Freescale, which just merged with NXP (Philips' chip spin off? Did Motorola retain some portion?
philippnagel 11y ago
I am obviously not Jeff Bezos but I asked myself the same question. Could such an extreme outsourcing service (not necessarily only fabricating chips) paired with the accessibility of AWS be viable? Does such a company exist?
- CamperBob2 11y ago
  To some extent, yes, and a few of those companies already exist, with names like Xilinx and Altera. Their FPGA products are available at 22 nm now. But they're not of much use when it comes to selling cheap commodity hardware in volume, of course.

_yosefk 11y ago

Erm... you can "rent" it from TSMC, you could before AWS existed, and in fact some of Apple chips are manufactured by TSMC (http://en.wikipedia.org/wiki/Apple_system_on_a_chip#Apple_A8X http://en.wikipedia.org/wiki/Apple_system_on_a_chip#Apple_A8...) Now "an idea for something great in CPU design" is unlikely to result in a marketable chip these days, but chip startups exist, and some are very small. Adapteva for instance is a 5-people company.

mbell 11y ago

> Apple does a lot of work in hardware and hardware manufacturing, both areas which are pretty capital-intensive and might not lead themselves as easily to the startup world. There is some truth to that but it's not the custom chip manufacturing that drives it. It's not even what I guess I would call 'excellence in material design' that drives it. Really it's a combination of the choice to not cut corners on hardware combined with the scale and market position to support the cost. As an example a lot of has been made in the past about Apple's charges, both laptop and iDevices, they are small, sleek and powerful for their size. There isn't anything special going on there from an electronics perspective, they didn't invent new types of power conversion, they just didn't cut every possible corner to reduce cost and they had the budget to allow custom parts when off the shelf didn't fit. I don't mean custom IC's here I mean custom metal fab, maybe custom caps that are 'normal' other than being shaped a bit differently, etc. Apple has the volume and price point to let them do this when the vast majority of companies don't.