3 ms·
What's also interesting is that the circuit board left on the micro-SMA connector for an external antenna. The early press releases mention deeper hardware int
by joezydeco 12y ago
What's also interesting is that the circuit board left on the micro-SMA connector for an external antenna.
The early press releases mention deeper hardware integration with consumer products. I'm guessing they're going to be dropping this board into other things besides the Dash product.
- cushychicken 12y agoThat's actually an RF testpoint, not an SMA connector (by which I think you mean UF.L connector, like this guy: http://upload.wikimedia.org/wikipedia/commons/c/ca/U.FL_connector.jpg http://upload.wikimedia.org/wikipedia/commons/c/ca/U.FL_conn...). It functions like a switch that is closed when the RF tester connects to it.
- joezydeco 12y agoIf you were to hook one of these up to the connector: https://www.sparkfun.com/products/11320 https://www.sparkfun.com/products/11320 Would it not function as an external wifi antenna? (and yeah you're right about the ufl. thanks for the correction)
- cushychicken 12y agoIn a sense, you're right - it's meant as a quick release testpoint for conducted radio performance on a manufacturing line. Theoretically, you COULD hook up an antenna to it, but you'd have to know some substantive details about the integrated PCB antenna (impedance, center frequency, etc) to get good or even comparable performance out of the external one. Probably not to a male UFL connector, in any case - I'm 99% sure this type of connector is not compatible with UFL. Mileage may vary, of course, but in my experience this type of connector is more frequently used to get conducted power RF measurements in manufacturing settings.