3 ms·
So, for those that don't remember what "regular" spider silk is like, or kevlar: nanomagic spider silk: 5400 MPa (5.4 GPa) Spider silk: 1600
by e12e 12y ago
So, for those that don't remember what "regular" spider silk is like, or kevlar:
nanomagic spider silk: 5400 MPa (5.4 GPa)
Spider silk: 1600 MPa
Silkworm silk: 500 MPa
Aramid
(Kevlar or Twaron): 3620 MPa
Steel: 450 ~
2600 MPa
If I'm reading http://en.wikipedia.org/wiki/Ultimate_tensile_strength http://en.wikipedia.org/wiki/Ultimate_tensile_strength correctly (and comparing the right numbers with the ones from the article...). At least kevlar seem to be in the same ballpark.
- cnvogel 12y agoInterestingly the spider silk of 5.4 GPa has higher tensile strength than the specimens of "pure" carbon nanotubes of 2cm measured in labs at 3.6 GPa. The theoretical limit of cabon nanotubes is said to be at 300 GPa, and it's assumed that materials with about 130 GPa of tensile strength would be needed for the "rope" of an space elevator.
- EGreg 12y agoCan a human actually break such a tiny web?
- cnvogel 12y agoAccording to wikipedia, the diameter of natural spider silk is 4µm, which is a cross section area of 1.26e-11 m². Multiplied by the tensile strength of natural spider silk (5.4 GPa) gives the capacity to lift 68 milinewtoms, or 7 Grams! http://www.wolframalpha.com/input/?i=%284e-6+meter+%2F+2%29%5E2+*+pi+*+5.4e9+pascal+%2F+%289.81+m%2Fs%5E2%29 http://www.wolframalpha.com/input/?i=%284e-6+meter+%2F+2%29%...
- lmm 12y agoIt's only ~4x stronger than regular spider silk, so I'm going to say yes.
- BurningFrog 12y agoThanks. Those numbers were sorely missing from the article.