3 ms·
"Because LEDs are essentially microchips, they can be programmed." This is incorrect. The die process size (and chemistry) used for making LEDs would make abso
by whatshisface 12y ago
"Because LEDs are essentially microchips, they can be programmed."
This is incorrect. The die process size (and chemistry) used for making LEDs would make absolutely terrible microchips. All programmable signs have separate control chips.
- njohnson41 12y agoLEDs at 4 V DC are probably much easier to control with "microchips", which operate at a similar voltage, than neon at 2-15 KV AC. I agree he worded it badly, but the conclusion still makes sense for a loose reading of "essentially".
- randomdata 12y agoPlus, the RGB LED pictured in the article can be "programmed" in the sense that the colour can be defined on the fly, and isn't bound to the bulb colour defined in the original design.
- dredmorbius 12y agoYou're reminding me of the electric light signage, based on incandescent bulbs, of the 1970s found in some older downtown areas. Effects such as "running" lights, etc., which judging by the racket they made were operated by electromechanical relays, and you could quite clearly hear them as they operated.
- 13 12y agoThere are a lot of LEDs that have controllers embedded like the WS2812.
- Dylan16807 12y agoThat's a small chip and three normal discrete LEDs packed up in a single box.
- 13 12y agohttps://cdn.sparkfun.com//assets/parts/8/0/3/7/11821-02.jpg https://cdn.sparkfun.com//assets/parts/8/0/3/7/11821-02.jpg I'm quite aware. LED normally refers to the packaged die, not the die itself when people are talking about it like this. Having the controller inside makes absolute sense, the alternative is running hundreds of rows of PWM from your driver chips out everywhere.