5 ms·
The $11185 Connector
- swamp40 12y agoI think you might be better off a) finding and contacting an original mfg who still has the tooling, or b) making some kind of adapter board by pulling the pins from a DB25 and soldering them onto a pcb. I wouldn't be shocked if you paid them and got the first parts and had a problem. Then they will point to your lack of tolerance or chamfer specs or somesuch and then want more money to modify the tool.
- fubarred 12y agoI worked in the nuclear industry a long time ago. The reason some parts are expensive is the documentation (chain of ownership) and testing involved. Some parts must be flame tested (set on fire and self-extinguish in X seconds), so that 50% of the batch are destructively tested in order to meet specific requirements. It doesn't justify excessive profiteering on a setup or per-part basis, but there is reason for connectors costing $90/part.
- aftbit 12y agoDo you have any nuclear industry war stories to share?
- DangerousPie 12y agoPresumably the reason that the other factories did not make an offer was that they would have had similar set up costs and already expected that the volume wouldn't be large enough to make this viable...
- Yetanfou 12y agoDB-25-connector, meet hacksaw and belt/disc sander. Welcome, DB-19 connector! While this would be a no-go for a 'regular' product, it would be perfectly acceptable for the niche application - floppy emulators for old personal computers - these connectors are used for.
- bwldrbst 12y agoI did pretty much exactly this a few weeks ago to make a DB-23 video cable for an Amiga :]
- blackguardx 12y agoFor a completely custom connector, that seems like super cheap NRE to me. I work as an EE and have paid more than that on small run prototype stuff that is simpler to manufacture than a connector (think prototype circuit boards). Connectors require multiple sets of tooling and specialized processes unique to the connector industry. Even getting the tooling for the simplest plastic part is goig to be thousands of dollars.
- daeken 12y agoI'd strongly recommend looking into 3d printing these. You could pretty easily 3d print a plastic version of the connector itself (and shell, if male), then add aluminum tape to the inside if you need EMF protection. Then you just pop in pins (which you can get at Fry's by the hundred for a couple bucks), and you have a finished connector. A few hundred dollars in setup and you're done, with a unit cost of under a dollar, all in.
- Animats 12y agoNone of the low-end 3D printers could hold the tolerances needed. Even a Form 1 isn't that precise. Connector tolerances are very tight. That's why intermittent electrical connections are mostly a thing of the past.
- daeken 12y agoI regularly print tighter tolerances with an FDM printer (modified Makerbot Replicator 2). D-sub connectors just aren't that tight; if you were printing the pins themselves, it'd be different, but the plastic side of things is not an issue at all.
- Animats 12y agoFor connectors where the pins are crimped to wires, then inserted into the connector block, the hole into which each pin fits has a complex form. It has to be shaped so that the pin clicks into place, but isn't pushed out by ordinary connector insertion forces. FDM extruders extrude a thread bigger than the tolerances required for that. Getting a longer D-sub connector and machining the plastic down is more likely to work. 3D printing isn't magic.
- fnordfnordfnord 12y agoSlight misalignment might actually improve electrical contact as long as it weren't too bad.
- Alupis 12y agoThe title is very misleading... it's not an $11,185 connector, that's the price of setting up custom tooling for this component. After-which the factory quoted a very reasonable $0.13 per piece. The author went into this stating he'd be willing to pay for their tooling... then is sticker-shocked when they quote him for so. It's like the author went into this thinking they'd pay a few hundred bucks (for the custom tooling) and get a short fab run (< 100) back out. These factories aren't going to tool-up unless they're about to produce thousands... it doesn't matter if it's PCB's, connectors, action figures, jewelry display stands, etc. It's not worth their time at small scale. The reason these connectors are difficult to find (if possible at all) is people aren't buying them... so you have to make it worth the factory's time to custom fab them for you. And if they think you're going to be a one-time-run, then you aren't going to get as good of a price as if you signed some long-term production agreement (10,000 a month for 12 months, etc...), He also didn't go about finding a fab in the best way.. he went to Alibaba which is essentially the Amazon of factories... definitely not the "best price" you can get.
- cellshade 12y agoSince you seem to be familiar with this sort of thing, what is the best way to find a fab if not going to Alibaba?
- Alupis 12y agoThere is no specific place to go to... a lot of it simply comes from working within the industry and learning the key players. My company doesn't buy/sell electronics, but the factories operate more-or-less the same. Going to Alibaba is like shopping on Amazon. You wouldn't go to Amazon to purchase bulk (> 10,000) pieces of some item... you certainly aren't getting the best deal. Amazon takes a cut (so does Alibaba), and retailers listing there have catered their prices towards end-users (so significant mark-ups). If it were me, I'd post on electrical engineering forums and ask who people recommend for fab jobs. Sometimes a nice supplier/distributor will tell you who they use for fab jobs (but a lot do tend to guard this). Alibaba just isn't the best way to get the best price...
- bsder 12y agoTalk to Sullins Connector Corp directly. http://www.sullinscorp.com/ http://www.sullinscorp.com/ The last time I had a connector I needed, they took something they had off the shelf, milled it, stuffed it with different pins, and charged me $100 for 5. I was stunned. I haven't had customer service that good in decades. Really. Call them. Even better, take a factory tour. They may not be able to do it, but they have 30 years of designs archived. One of them will probably work.
- sounds 12y agoExcept he did. They declined. Maybe if he knew somebody higher up at Sullins?
- bronson 12y agoThey declined because, "we are currently phasing out our d-sub line and will be going obsolete in June." That's basically permanent.
- bsder 12y agoUnlikely. If they are "phasing out" a product line to the point of it being gone in a couple months it means that they only have inventory and aren't manufacturing them anymore. So, even if they have the designs, they no longer have the equipment and materials.
- raldi 12y agoGood story, but I flagged it for the misleading title. Perhaps a less sensational one would be, "Making new DB-19 cables is expensive."
- userbinator 12y agoA quick search suggests that they're still made: http://www.connectworld.net/cgi-bin/rrdata/DB19FS http://www.connectworld.net/cgi-bin/rrdata/DB19FS (female) http://www.connectworld.net/cgi-bin/rrdata/DB19MS http://www.connectworld.net/cgi-bin/rrdata/DB19MS (male)
- oasisbob 12y agoHe bought all those ones: http://www.bigmessowires.com/2015/01/28/in-search-of-the-elusive-db19/ http://www.bigmessowires.com/2015/01/28/in-search-of-the-elu...
- largote 12y agoDo you need to support older hardware? Or is there a particular reason you can't use DB-25 and just use 19 pins?
- deleted 12y ago[deleted]
- recibe 12y agoThe Chinese are tired of being paid a fraction of what citizens in developed countries make for doing the same work. This is a blog about how a citizen in a developed country is "shocked" at the concept that other people should be paid a fair wage even if - gasp - they're Chinese.
- to3m 12y agoThe phrase "shocked" doesn't occur in the post, so I'm not sure where that term comes from. He does say that the quoted figure is more expensive than he hoped for, which is reasonable, since he goes on to present a number of quick calculations suggesting he can't justify purchasing them at that price.
- ajaimk 12y agohttp://www.digikey.com/product-search/en?x=0&y=0&lang=en&site=us&keywords=db-19 http://www.digikey.com/product-search/en?x=0&y=0&lang=en&sit...
- fnordfnordfnord 12y agoAll are non-stocked, and appear to be DB25, not DB19.
- userbinator 12y agoThose are all DB25s that happen to have a part number starting with "DB-19".
- fnordfnordfnord 12y agoBargain for everything in China. It is the culture. They will haggle over the price of anything. It's actually kind of fun once you get used to it.
- greggman 12y agoThis just reminds me. I wanted to buy a couple of extra allen wrenches for my camera tripod just so I could put them in various bags and hopefully never be without one. Check Amazon... 1 wrench $6 100 wrenches $12 I now have a box of 100 allen wrenches all the same size.
- HeyLaughingBoy 12y agoI have a package of DB25 connectors left over from a product I used to build and sell that has slowly been whittled down over the years. It's because of things like this that I have been reluctant to toss them out. At sometime in the future I think they might be useful to me or someone else. Likewise the bag of 50 Centronics connectors. They have to be valuable sometime, right? Or maybe I'm just a packrat.
- tylerritchie 12y agoThat's too bad: Steve Chamberlin appears to have taken the post down probably due to unwarranted "UR DOIN IT WRONG" in his page comments. There are a couple other comments [1] [2] that touch on this. But it does seem like there are some shortcuts that could be taken with DB-25 connectors. Anyone who's still manufacturing them (which may not be many) might be able to modify their tooling to not add 6 pins on one side and not add the protective cowling. Is it a safe, strong connector? No. Would it cost $11k in tooling? I have no idea I'm a biologist. It'll be interesting to see what he settles on. edit: Ha, he's already doing that: http://www.bigmessowires.com/2015/02/01/designing-a-db-19-substitute/ http://www.bigmessowires.com/2015/02/01/designing-a-db-19-su... [1] https://news.ycombinator.com/item?id=9012293#9012602 https://news.ycombinator.com/item?id=9012293#9012602 [1] https://news.ycombinator.com/item?id=9012293#9012695 https://news.ycombinator.com/item?id=9012293#9012695
- deleted 12y ago[deleted]
- platinumdragon 12y ago"No posts matched your criteria." Great job.