3 ms·
Noritake is one of the largest global manufacturers of VFD displays. This is no coincidence.
by joezydeco 12y ago
Noritake is one of the largest global manufacturers of VFD displays. This is no coincidence.
- kazinator 12y agoI'm looking at some Noritake data sheets for VFD's. Looks like you could possibly just use those things as distortion elements. From the picture it looks like this part is a dual triode device. The groups of three pins on either side are the anode/grid/cathode, and the four pins in the middle are separate filament circuits. 12AX7 and similar tubes usually have only three pins for two filaments: the filaments are in series with a center tap for hooking them up in parallel. If this thing is similar to VFD's, it can probably run at around 20V for the anode voltage, and a small voltage for the filaments, around 2V. It would be interesting to develop a tube board for the ADA MP-1 guitar pre-amp with these things. The stock one uses a pair of 12AX7's. A 9V power feed is used for the filaments, and 190V for the anode voltage. That could all be gutted out, and a simpler transformer used which doesn't provide a high voltage tap. The silicon side of the MP-1 runs on +/-15V rails; the same underlying transformer tap could could power the Noritake tubes.
- joezydeco 12y agoI wonder if you could do some kind of crazy circuit bending by turning the VFD into a distortion device, with the characters displayed on the unit as part of the input.