6 ms·
The main concern with consumer adoption of separate 4k/5k+ screens will be dual-link dvi and hdmi 2... since standard hdmi can only drive 4k at 30hz refresh.
by tracker1 12y ago
The main concern with consumer adoption of separate 4k/5k+ screens will be dual-link dvi and hdmi 2... since standard hdmi can only drive 4k at 30hz refresh.
- joenathan 12y agoI just bought a GTX 980 because it supports HDMI 2.0, I am now running my HTPC at 4096x2160 @ 60hz over HDMI. As of right now the only graphics cards you can buy that support HDMI 2.0 are the GTX 970 & 980.
- darkstar999 12y agoWhat display/tv are you using?
- joenathan 12y agoLG 65UB9500 with WebOS, it's a pretty great TV, I really like the WebOS interface.
- bas 12y agoWhere did you find a GTX 980 in stock?
- MetaCosm 12y agoIf you are lucky enough to live near a MicroCenter -- they seem to have gotten good stocks and still have a few kicking about.
- soylentcola 12y agoYeah, that's what I plan on doing this weekend. Wasn't planning to upgrade my GTX680 for a while as it was plenty for GPU acceleration in Adobe apps and for gaming at 2560x1440 but the Rift pushes it to its limit in several applications. Thought about just getting another 680 to put in SLI but my stupid past self didn't buy an SLI motherboard and it's not worth the hassle to buy another mobo, another 680, and rebuild the thing now that the 980's are out.
- joenathan 12y agoGot mine from B&H Photo, went for the ASUS.
- madaxe_again 12y agoJust build myself a rig for the first time in a decade, with a pair of 980s SLI'd... it kicks like a mule... although unfortunately my AV receiver seems to support "HDMI 2.0 standard", rather than HDMI 2.0, which is a kick in the nuts. Now I just need to wait for the consumer version of the rift.
- tormeh 12y agoOr you can use DisplayPort. Nothing wrong with that alternative, license-free standard.
- joenathan 12y agoIn my experience DP doesn't work reliably @ 4k, at least on AMD & Intel GPUs. If you do a bit of Googleing you'll see that there are many problems with DP at super high resolutions. I personally went through 5 different brands of DP cables, a DP MST HUB and all sorts of other remedies and fixes and nothing works reliably. I have 3 ASUS PB278Q and the only input that works reliably is DVI.
- wlesieutre 12y agoWait for DisplayPort 1.3 for this. It currently uses multi-stream transport to feed the display as if it's two half screens daisy chained together. Sometimes it works, other times it's a trainwreck. At least know what you're getting in to. Dell's 4K screens came up here yesterday. Here's what I had to say about those: https://news.ycombinator.com/item?id=8459298 https://news.ycombinator.com/item?id=8459298 I like DP better than HDMI politically, but if you have a screen with HDMI 2.0 support that's a much safer bet than DisplayPort 1.2 is.
- zanny 12y agoYou don't have to use MST, just that most 4k panels manufactured intentionally mimic two panels so they can output two hdmi 1.4 displays to composite into the whole screen. I imagine any HDMI 2.0 4k screens to not use it, and even if they are still on DP 1.2, they would start showing a single display.
- reitzensteinm 12y agoActually, it's not intrinsic to DisplayPort 1.2 that 4k displays must be driven with MST, it's just that for a long time the electronics to decode the full signal were not available, hence the hack. Starting with the Samsung U28D590D[1], many 4k displays use single stream transport on DP 1.2. Also, for 5k, you actually have to wait for DisplayPort 1.3 (if you want 60hz), because there's not enough bandwidth, multi stream transport or not. There's a neat bandwidth calculator at [2]. 4k is 11.94 GBit/s without overhead, 5k is 21.23 GBit/s. DisplayPort 1.2 and 1.3 are 17.28 Gbit/s and 25.92 Gbit/s respectively. This unfortunately means no 120hz 5k displays on even DP 1.3 without compression (which is supported). [1] http://www.pcper.com/reviews/Displays/Video-Perspective-Samsung-U28D590D-28-4K-Single-Stream-60-Hz-Monitor-Review http://www.pcper.com/reviews/Displays/Video-Perspective-Sams... [2]http://emsai.net/projects/widescreen/bandwidth/ http://emsai.net/projects/widescreen/bandwidth/
- Igglyboo 12y agohdmi 2.0 can drive 4k at 60fps max, won't be able to drive this 5k iMac
- elif 12y agothis was my first thought too... considering i had to hack my $6000 D700 mac pro into displaying 4k at 56hz instead of 60hz to avoid ridiculous noise/tearing on half the screen... I personally wouldn't touch 5k for another year at least. No way of knowing because it's not mentioned in the specs, but i'm guessing this new mac is limited to 30hz.
- seanmcdirmid 12y agoWhy would you even think this since they aren't limited to DVI or displayport?